Total
5884 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-53281 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Avoid NULL pointer dereference or refcount corruption Commit 60f030f7418d ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE") fixed a NULL pointer dereference in an unlikely situation partly. If dev_pasid is not found in the dev_pasids list, it remains NULL. However, the teardown operations are executed unconditionally, this lead to a NULL pointer dereference or refcount corruption. If the domain was never attached to this IOMMU, info will be NULL, which would cause an immediate dereference when checking --info->refcnt. Even if info is not NULL, decrementing the refcount without having removed a valid PASID might unbalance the count. This could lead to premature dropping of the refcount to 0, potentially causing a use-after-free for the remaining active devices sharing the domain. Fix it by returning early if dev_pasid is NULL, before executing the teardown operations. Issue found by AI review and suggested by Kevin Tian. https://sashiko.dev/#/patchset/20260421031347.1408890-1-zhenzhong.duan%40intel.com | |||||
| CVE-2026-46282 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iio: frequency: admv1013: fix NULL pointer dereference on str When device_property_read_string() fails, str is left uninitialized but the code falls through to strcmp(str, ...), dereferencing a garbage pointer. Replace manual read/strcmp with device_property_match_property_string() and consolidate the SE mode enums into a single sequential enum, mapping to hardware register values via a switch consistent with other bitfields in the driver. Several cleanup patches have been applied to this driver recently so this will need a manual backport. | |||||
| CVE-2026-46245 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dc_link NULL handling in HPD init amdgpu_dm_hpd_init() may see connectors without a valid dc_link. The code already checks dc_link for the polling decision, but later unconditionally dereferences it when setting up HPD interrupts. Assign dc_link early and skip connectors where it is NULL. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c:940 amdgpu_dm_hpd_init() error: we previously assumed 'dc_link' could be null (see line 931) drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c 923 /* 924 * Analog connectors may be hot-plugged unlike other connector 925 * types that don't support HPD. Only poll analog connectors. 926 */ 927 use_polling |= 928 amdgpu_dm_connector->dc_link && ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The patch adds this NULL check but hopefully it can be removed 929 dc_connector_supports_analog(amdgpu_dm_connector->dc_link->link_id.id); 930 931 dc_link = amdgpu_dm_connector->dc_link; dc_link assigned here. 932 933 /* 934 * Get a base driver irq reference for hpd ints for the lifetime 935 * of dm. Note that only hpd interrupt types are registered with 936 * base driver; hpd_rx types aren't. IOW, amdgpu_irq_get/put on 937 * hpd_rx isn't available. DM currently controls hpd_rx 938 * explicitly with dc_interrupt_set() 939 */ --> 940 if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) { ^^^^^^^^^^^^^^^^^^^^^^^ If it's NULL then we are trouble because we dereference it here. 941 irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1; 942 /* 943 * TODO: There's a mismatch between mode_info.num_hpd 944 * and what bios reports as the # of connectors with hpd | |||||
| CVE-2026-43463 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc, afs: Fix missing error pointer check after rxrpc_kernel_lookup_peer() rxrpc_kernel_lookup_peer() can also return error pointers in addition to NULL, so just checking for NULL is not sufficient. Fix this by: (1) Changing rxrpc_kernel_lookup_peer() to return -ENOMEM rather than NULL on allocation failure. (2) Making the callers in afs use IS_ERR() and PTR_ERR() to pass on the error code returned. | |||||
| CVE-2026-43408 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ceph: add a bunch of missing ceph_path_info initializers ceph_mdsc_build_path() must be called with a zero-initialized ceph_path_info parameter, or else the following ceph_mdsc_free_path_info() may crash. Example crash (on Linux 6.18.12): virt_to_cache: Object is not a Slab page! WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6732 kmem_cache_free+0x316/0x400 [...] Call Trace: [...] ceph_open+0x13d/0x3e0 do_dentry_open+0x134/0x480 vfs_open+0x2a/0xe0 path_openat+0x9a3/0x1160 [...] cache_from_obj: Wrong slab cache. names_cache but object is from ceph_inode_info WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6746 kmem_cache_free+0x2dd/0x400 [...] kernel BUG at mm/slub.c:634! Oops: invalid opcode: 0000 [#1] SMP NOPTI RIP: 0010:__slab_free+0x1a4/0x350 Some of the ceph_mdsc_build_path() callers had initializers, but others had not, even though they were all added by commit 15f519e9f883 ("ceph: fix race condition validating r_parent before applying state"). The ones without initializer are suspectible to random crashes. (I can imagine it could even be possible to exploit this bug to elevate privileges.) Unfortunately, these Ceph functions are undocumented and its semantics can only be derived from the code. I see that ceph_mdsc_build_path() initializes the structure only on success, but not on error. Calling ceph_mdsc_free_path_info() after a failed ceph_mdsc_build_path() call does not even make sense, but that's what all callers do, and for it to be safe, the structure must be zero-initialized. The least intrusive approach to fix this is therefore to add initializers everywhere. | |||||
| CVE-2026-43337 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference in dcn401_init_hw() dcn401_init_hw() assumes that update_bw_bounding_box() is valid when entering the update path. However, the existing condition: ((!fams2_enable && update_bw_bounding_box) || freq_changed) does not guarantee this, as the freq_changed branch can evaluate to true independently of the callback pointer. This can result in calling update_bw_bounding_box() when it is NULL. Fix this by separating the update condition from the pointer checks and ensuring the callback, dc->clk_mgr, and bw_params are validated before use. Fixes the below: ../dc/hwss/dcn401/dcn401_hwseq.c:367 dcn401_init_hw() error: we previously assumed 'dc->res_pool->funcs->update_bw_bounding_box' could be null (see line 362) (cherry picked from commit 86117c5ab42f21562fedb0a64bffea3ee5fcd477) | |||||
| CVE-2026-43272 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix possible dereference of uninitialized pointer There is a pointer head_page in rb_meta_validate_events() which is not initialized at the beginning of a function. This pointer can be dereferenced if there is a failure during reader page validation. In this case the control is passed to "invalid" label where the pointer is dereferenced in a loop. To fix the issue initialize orig_head and head_page before calling rb_validate_buffer. Found by Linux Verification Center (linuxtesting.org) with SVACE. | |||||
| CVE-2026-43263 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix Null reference while testing fluster When multi instances are created/destroyed, many interrupts happens and structures for decoder are removed. "struct vpu_instance" this structure is shared for all flow in the decoder, so if the structure is not protected by lock, Null dereference could happens sometimes. IRQ Handler was spilt to two phases and Lock was added as well. | |||||
| CVE-2026-31579 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit wg_netns_pre_exit() manually acquires rtnl_lock() inside the pernet .pre_exit callback. This causes a hung task when another thread holds rtnl_mutex - the cleanup_net workqueue (or the setup_net failure rollback path) blocks indefinitely in wg_netns_pre_exit() waiting to acquire the lock. Convert to .exit_rtnl, introduced in commit 7a60d91c690b ("net: Add ->exit_rtnl() hook to struct pernet_operations."), where the framework already holds RTNL and batches all callbacks under a single rtnl_lock()/rtnl_unlock() pair, eliminating the contention window. The rcu_assign_pointer(wg->creating_net, NULL) is safe to move from .pre_exit to .exit_rtnl (which runs after synchronize_rcu()) because all RCU readers of creating_net either use maybe_get_net() - which returns NULL for a dying namespace with zero refcount - or access net->user_ns which remains valid throughout the entire ops_undo_list sequence. [ Jason: added __net_exit and __read_mostly annotations that were missing. ] | |||||
| CVE-2026-31562 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: dsi: Store driver data before invoking mipi_dsi_host_register The call to mipi_dsi_host_register triggers a callback to mtk_dsi_bind, which uses dev_get_drvdata to retrieve the mtk_dsi struct, so this structure needs to be stored inside the driver data before invoking it. As drvdata is currently uninitialized it leads to a crash when registering the DSI DRM encoder right after acquiring the mode_config.idr_mutex, blocking all subsequent DRM operations. Fixes the following crash during mediatek-drm probe (tested on Xiaomi Smart Clock x04g): Unable to handle kernel NULL pointer dereference at virtual address 0000000000000040 [...] Modules linked in: mediatek_drm(+) drm_display_helper cec drm_client_lib drm_dma_helper drm_kms_helper panel_simple [...] Call trace: drm_mode_object_add+0x58/0x98 (P) __drm_encoder_init+0x48/0x140 drm_encoder_init+0x6c/0xa0 drm_simple_encoder_init+0x20/0x34 [drm_kms_helper] mtk_dsi_bind+0x34/0x13c [mediatek_drm] component_bind_all+0x120/0x280 mtk_drm_bind+0x284/0x67c [mediatek_drm] try_to_bring_up_aggregate_device+0x23c/0x320 __component_add+0xa4/0x198 component_add+0x14/0x20 mtk_dsi_host_attach+0x78/0x100 [mediatek_drm] mipi_dsi_attach+0x2c/0x50 panel_simple_dsi_probe+0x4c/0x9c [panel_simple] mipi_dsi_drv_probe+0x1c/0x28 really_probe+0xc0/0x3dc __driver_probe_device+0x80/0x160 driver_probe_device+0x40/0x120 __device_attach_driver+0xbc/0x17c bus_for_each_drv+0x88/0xf0 __device_attach+0x9c/0x1cc device_initial_probe+0x54/0x60 bus_probe_device+0x34/0xa0 device_add+0x5b0/0x800 mipi_dsi_device_register_full+0xdc/0x16c mipi_dsi_host_register+0xc4/0x17c mtk_dsi_probe+0x10c/0x260 [mediatek_drm] platform_probe+0x5c/0xa4 really_probe+0xc0/0x3dc __driver_probe_device+0x80/0x160 driver_probe_device+0x40/0x120 __driver_attach+0xc8/0x1f8 bus_for_each_dev+0x7c/0xe0 driver_attach+0x24/0x30 bus_add_driver+0x11c/0x240 driver_register+0x68/0x130 __platform_register_drivers+0x64/0x160 mtk_drm_init+0x24/0x1000 [mediatek_drm] do_one_initcall+0x60/0x1d0 do_init_module+0x54/0x240 load_module+0x1838/0x1dc0 init_module_from_file+0xd8/0xf0 __arm64_sys_finit_module+0x1b4/0x428 invoke_syscall.constprop.0+0x48/0xc8 do_el0_svc+0x3c/0xb8 el0_svc+0x34/0xe8 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 52800022 941004ab 2a0003f3 37f80040 (29005a80) | |||||
| CVE-2026-23017 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix error handling in the init_task on load If the init_task fails during a driver load, we end up without vports and netdevs, effectively failing the entire process. In that state a subsequent reset will result in a crash as the service task attempts to access uninitialized resources. Following trace is from an error in the init_task where the CREATE_VPORT (op 501) is rejected by the FW: [40922.763136] idpf 0000:83:00.0: Device HW Reset initiated [40924.449797] idpf 0000:83:00.0: Transaction failed (op 501) [40958.148190] idpf 0000:83:00.0: HW reset detected [40958.161202] BUG: kernel NULL pointer dereference, address: 00000000000000a8 ... [40958.168094] Workqueue: idpf-0000:83:00.0-vc_event idpf_vc_event_task [idpf] [40958.168865] RIP: 0010:idpf_vc_event_task+0x9b/0x350 [idpf] ... [40958.177932] Call Trace: [40958.178491] <TASK> [40958.179040] process_one_work+0x226/0x6d0 [40958.179609] worker_thread+0x19e/0x340 [40958.180158] ? __pfx_worker_thread+0x10/0x10 [40958.180702] kthread+0x10f/0x250 [40958.181238] ? __pfx_kthread+0x10/0x10 [40958.181774] ret_from_fork+0x251/0x2b0 [40958.182307] ? __pfx_kthread+0x10/0x10 [40958.182834] ret_from_fork_asm+0x1a/0x30 [40958.183370] </TASK> Fix the error handling in the init_task to make sure the service and mailbox tasks are disabled if the error happens during load. These are started in idpf_vc_core_init(), which spawns the init_task and has no way of knowing if it failed. If the error happens on reset, following successful driver load, the tasks can still run, as that will allow the netdevs to attempt recovery through another reset. Stop the PTP callbacks either way as those will be restarted by the call to idpf_vc_core_init() during a successful reset. | |||||
| CVE-2026-22996 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Don't store mlx5e_priv in mlx5e_dev devlink priv mlx5e_priv is an unstable structure that can be memset(0) if profile attaching fails, mlx5e_priv in mlx5e_dev devlink private is used to reference the netdev and mdev associated with that struct. Instead, store netdev directly into mlx5e_dev and get mdev from the containing mlx5_adev aux device structure. This fixes a kernel oops in mlx5e_remove when switchdev mode fails due to change profile failure. $ devlink dev eswitch set pci/0000:00:03.0 mode switchdev Error: mlx5_core: Failed setting eswitch to offloads. dmesg: workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12 mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12 workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12 mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12 $ devlink dev reload pci/0000:00:03.0 ==> oops BUG: kernel NULL pointer dereference, address: 0000000000000520 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 3 UID: 0 PID: 521 Comm: devlink Not tainted 6.18.0-rc5+ #117 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:mlx5e_remove+0x68/0x130 RSP: 0018:ffffc900034838f0 EFLAGS: 00010246 RAX: ffff88810283c380 RBX: ffff888101874400 RCX: ffffffff826ffc45 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffff888102d789c0 R08: ffff8881007137f0 R09: ffff888100264e10 R10: ffffc90003483898 R11: ffffc900034838a0 R12: ffff888100d261a0 R13: ffff888100d261a0 R14: ffff8881018749a0 R15: ffff888101874400 FS: 00007f8565fea740(0000) GS:ffff88856a759000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000520 CR3: 000000010b11a004 CR4: 0000000000370ef0 Call Trace: <TASK> device_release_driver_internal+0x19c/0x200 bus_remove_device+0xc6/0x130 device_del+0x160/0x3d0 ? devl_param_driverinit_value_get+0x2d/0x90 mlx5_detach_device+0x89/0xe0 mlx5_unload_one_devl_locked+0x3a/0x70 mlx5_devlink_reload_down+0xc8/0x220 devlink_reload+0x7d/0x260 devlink_nl_reload_doit+0x45b/0x5a0 genl_family_rcv_msg_doit+0xe8/0x140 | |||||
| CVE-2025-39879 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ceph: always call ceph_shift_unused_folios_left() The function ceph_process_folio_batch() sets folio_batch entries to NULL, which is an illegal state. Before folio_batch_release() crashes due to this API violation, the function ceph_shift_unused_folios_left() is supposed to remove those NULLs from the array. However, since commit ce80b76dd327 ("ceph: introduce ceph_process_folio_batch() method"), this shifting doesn't happen anymore because the "for" loop got moved to ceph_process_folio_batch(), and now the `i` variable that remains in ceph_writepages_start() doesn't get incremented anymore, making the shifting effectively unreachable much of the time. Later, commit 1551ec61dc55 ("ceph: introduce ceph_submit_write() method") added more preconditions for doing the shift, replacing the `i` check (with something that is still just as broken): - if ceph_process_folio_batch() fails, shifting never happens - if ceph_move_dirty_page_in_page_array() was never called (because ceph_process_folio_batch() has returned early for some of various reasons), shifting never happens - if `processed_in_fbatch` is zero (because ceph_process_folio_batch() has returned early for some of the reasons mentioned above or because ceph_move_dirty_page_in_page_array() has failed), shifting never happens Since those two commits, any problem in ceph_process_folio_batch() could crash the kernel, e.g. this way: BUG: kernel NULL pointer dereference, address: 0000000000000034 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] SMP NOPTI CPU: 172 UID: 0 PID: 2342707 Comm: kworker/u778:8 Not tainted 6.15.10-cm4all1-es #714 NONE Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.10 12/08/2023 Workqueue: writeback wb_workfn (flush-ceph-1) RIP: 0010:folios_put_refs+0x85/0x140 Code: 83 c5 01 39 e8 7e 76 48 63 c5 49 8b 5c c4 08 b8 01 00 00 00 4d 85 ed 74 05 41 8b 44 ad 00 48 8b 15 b0 > RSP: 0018:ffffb880af8db778 EFLAGS: 00010207 RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000003 RDX: ffffe377cc3b0000 RSI: 0000000000000000 RDI: ffffb880af8db8c0 RBP: 0000000000000000 R08: 000000000000007d R09: 000000000102b86f R10: 0000000000000001 R11: 00000000000000ac R12: ffffb880af8db8c0 R13: 0000000000000000 R14: 0000000000000000 R15: ffff9bd262c97000 FS: 0000000000000000(0000) GS:ffff9c8efc303000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000034 CR3: 0000000160958004 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ceph_writepages_start+0xeb9/0x1410 The crash can be reproduced easily by changing the ceph_check_page_before_write() return value to `-E2BIG`. (Interestingly, the crash happens only if `huge_zero_folio` has already been allocated; without `huge_zero_folio`, is_huge_zero_folio(NULL) returns true and folios_put_refs() skips NULL entries instead of dereferencing them. That makes reproducing the bug somewhat unreliable. See https://lore.kernel.org/20250826231626.218675-1-max.kellermann@ionos.com for a discussion of this detail.) My suggestion is to move the ceph_shift_unused_folios_left() to right after ceph_process_folio_batch() to ensure it always gets called to fix up the illegal folio_batch state. | |||||
| CVE-2025-39878 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix crash after fscrypt_encrypt_pagecache_blocks() error The function move_dirty_folio_in_page_array() was created by commit ce80b76dd327 ("ceph: introduce ceph_process_folio_batch() method") by moving code from ceph_writepages_start() to this function. This new function is supposed to return an error code which is checked by the caller (now ceph_process_folio_batch()), and on error, the caller invokes redirty_page_for_writepage() and then breaks from the loop. However, the refactoring commit has gone wrong, and it by accident, it always returns 0 (= success) because it first NULLs the pointer and then returns PTR_ERR(NULL) which is always 0. This means errors are silently ignored, leaving NULL entries in the page array, which may later crash the kernel. The simple solution is to call PTR_ERR() before clearing the pointer. | |||||
| CVE-2025-38605 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Pass ab pointer directly to ath12k_dp_tx_get_encap_type() In ath12k_dp_tx_get_encap_type(), the arvif parameter is only used to retrieve the ab pointer. In vdev delete sequence the arvif->ar could become NULL and that would trigger kernel panic. Since the caller ath12k_dp_tx() already has a valid ab pointer, pass it directly to avoid panic and unnecessary dereferencing. PC points to "ath12k_dp_tx+0x228/0x988 [ath12k]" LR points to "ath12k_dp_tx+0xc8/0x988 [ath12k]". The Backtrace obtained is as follows: ath12k_dp_tx+0x228/0x988 [ath12k] ath12k_mac_tx_check_max_limit+0x608/0x920 [ath12k] ieee80211_process_measurement_req+0x320/0x348 [mac80211] ieee80211_tx_dequeue+0x9ac/0x1518 [mac80211] ieee80211_tx_dequeue+0xb14/0x1518 [mac80211] ieee80211_tx_prepare_skb+0x224/0x254 [mac80211] ieee80211_xmit+0xec/0x100 [mac80211] __ieee80211_subif_start_xmit+0xc50/0xf40 [mac80211] ieee80211_subif_start_xmit+0x2e8/0x308 [mac80211] netdev_start_xmit+0x150/0x18c dev_hard_start_xmit+0x74/0xc0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 | |||||
| CVE-2025-38284 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: pci: configure manual DAC mode via PCI config API only To support 36-bit DMA, configure chip proprietary bit via PCI config API or chip DBI interface. However, the PCI device mmap isn't set yet and the DBI is also inaccessible via mmap, so only if the bit can be accessible via PCI config API, chip can support 36-bit DMA. Otherwise, fallback to 32-bit DMA. With NULL mmap address, kernel throws trace: BUG: unable to handle page fault for address: 0000000000001090 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: Oops: 0002 [#1] PREEMPT SMP PTI CPU: 1 UID: 0 PID: 71 Comm: irq/26-pciehp Tainted: G OE 6.14.2-061402-generic #202504101348 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE RIP: 0010:rtw89_pci_ops_write16+0x12/0x30 [rtw89_pci] RSP: 0018:ffffb0ffc0acf9d8 EFLAGS: 00010206 RAX: ffffffffc158f9c0 RBX: ffff94865e702020 RCX: 0000000000000000 RDX: 0000000000000718 RSI: 0000000000001090 RDI: ffff94865e702020 RBP: ffffb0ffc0acf9d8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000015 R13: 0000000000000719 R14: ffffb0ffc0acfa1f R15: ffffffffc1813060 FS: 0000000000000000(0000) GS:ffff9486f3480000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000001090 CR3: 0000000090440001 CR4: 00000000000626f0 Call Trace: <TASK> rtw89_pci_read_config_byte+0x6d/0x120 [rtw89_pci] rtw89_pci_cfg_dac+0x5b/0xb0 [rtw89_pci] rtw89_pci_probe+0xa96/0xbd0 [rtw89_pci] ? __pfx___device_attach_driver+0x10/0x10 ? __pfx___device_attach_driver+0x10/0x10 local_pci_probe+0x47/0xa0 pci_call_probe+0x5d/0x190 pci_device_probe+0xa7/0x160 really_probe+0xf9/0x370 ? pm_runtime_barrier+0x55/0xa0 __driver_probe_device+0x8c/0x140 driver_probe_device+0x24/0xd0 __device_attach_driver+0xcd/0x170 bus_for_each_drv+0x99/0x100 __device_attach+0xb4/0x1d0 device_attach+0x10/0x20 pci_bus_add_device+0x59/0x90 pci_bus_add_devices+0x31/0x80 pciehp_configure_device+0xaa/0x170 pciehp_enable_slot+0xd6/0x240 pciehp_handle_presence_or_link_change+0xf1/0x180 pciehp_ist+0x162/0x1c0 irq_thread_fn+0x24/0x70 irq_thread+0xef/0x1c0 ? __pfx_irq_thread_fn+0x10/0x10 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xfc/0x230 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x47/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> | |||||
| CVE-2025-37759 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ublk: fix handling recovery & reissue in ublk_abort_queue() Commit 8284066946e6 ("ublk: grab request reference when the request is handled by userspace") doesn't grab request reference in case of recovery reissue. Then the request can be requeued & re-dispatch & failed when canceling uring command. If it is one zc request, the request can be freed before io_uring returns the zc buffer back, then cause kernel panic: [ 126.773061] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 126.773657] #PF: supervisor read access in kernel mode [ 126.774052] #PF: error_code(0x0000) - not-present page [ 126.774455] PGD 0 P4D 0 [ 126.774698] Oops: Oops: 0000 [#1] SMP NOPTI [ 126.775034] CPU: 13 UID: 0 PID: 1612 Comm: kworker/u64:55 Not tainted 6.14.0_blk+ #182 PREEMPT(full) [ 126.775676] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-1.fc39 04/01/2014 [ 126.776275] Workqueue: iou_exit io_ring_exit_work [ 126.776651] RIP: 0010:ublk_io_release+0x14/0x130 [ublk_drv] Fixes it by always grabbing request reference for aborting the request. | |||||
| CVE-2024-56702 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark raw_tp arguments with PTR_MAYBE_NULL Arguments to a raw tracepoint are tagged as trusted, which carries the semantics that the pointer will be non-NULL. However, in certain cases, a raw tracepoint argument may end up being NULL. More context about this issue is available in [0]. Thus, there is a discrepancy between the reality, that raw_tp arguments can actually be NULL, and the verifier's knowledge, that they are never NULL, causing explicit NULL checks to be deleted, and accesses to such pointers potentially crashing the kernel. To fix this, mark raw_tp arguments as PTR_MAYBE_NULL, and then special case the dereference and pointer arithmetic to permit it, and allow passing them into helpers/kfuncs; these exceptions are made for raw_tp programs only. Ensure that we don't do this when ref_obj_id > 0, as in that case this is an acquired object and doesn't need such adjustment. The reason we do mask_raw_tp_trusted_reg logic is because other will recheck in places whether the register is a trusted_reg, and then consider our register as untrusted when detecting the presence of the PTR_MAYBE_NULL flag. To allow safe dereference, we enable PROBE_MEM marking when we see loads into trusted pointers with PTR_MAYBE_NULL. While trusted raw_tp arguments can also be passed into helpers or kfuncs where such broken assumption may cause issues, a future patch set will tackle their case separately, as PTR_TO_BTF_ID (without PTR_TRUSTED) can already be passed into helpers and causes similar problems. Thus, they are left alone for now. It is possible that these checks also permit passing non-raw_tp args that are trusted PTR_TO_BTF_ID with null marking. In such a case, allowing dereference when pointer is NULL expands allowed behavior, so won't regress existing programs, and the case of passing these into helpers is the same as above and will be dealt with later. Also update the failure case in tp_btf_nullable selftest to capture the new behavior, as the verifier will no longer cause an error when directly dereference a raw tracepoint argument marked as __nullable. [0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb | |||||
| CVE-2024-56544 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: udmabuf: change folios array from kmalloc to kvmalloc When PAGE_SIZE 4096, MAX_PAGE_ORDER 10, 64bit machine, page_alloc only support 4MB. If above this, trigger this warn and return NULL. udmabuf can change size limit, if change it to 3072(3GB), and then alloc 3GB udmabuf, will fail create. [ 4080.876581] ------------[ cut here ]------------ [ 4080.876843] WARNING: CPU: 3 PID: 2015 at mm/page_alloc.c:4556 __alloc_pages+0x2c8/0x350 [ 4080.878839] RIP: 0010:__alloc_pages+0x2c8/0x350 [ 4080.879470] Call Trace: [ 4080.879473] <TASK> [ 4080.879473] ? __alloc_pages+0x2c8/0x350 [ 4080.879475] ? __warn.cold+0x8e/0xe8 [ 4080.880647] ? __alloc_pages+0x2c8/0x350 [ 4080.880909] ? report_bug+0xff/0x140 [ 4080.881175] ? handle_bug+0x3c/0x80 [ 4080.881556] ? exc_invalid_op+0x17/0x70 [ 4080.881559] ? asm_exc_invalid_op+0x1a/0x20 [ 4080.882077] ? udmabuf_create+0x131/0x400 Because MAX_PAGE_ORDER, kmalloc can max alloc 4096 * (1 << 10), 4MB memory, each array entry is pointer(8byte), so can save 524288 pages(2GB). Further more, costly order(order 3) may not be guaranteed that it can be applied for, due to fragmentation. This patch change udmabuf array use kvmalloc_array, this can fallback alloc into vmalloc, which can guarantee allocation for any size and does not affect the performance of kmalloc allocations. | |||||
| CVE-2024-46682 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: prevent panic for nfsv4.0 closed files in nfs4_show_open Prior to commit 3f29cc82a84c ("nfsd: split sc_status out of sc_type") states_show() relied on sc_type field to be of valid type before calling into a subfunction to show content of a particular stateid. From that commit, we split the validity of the stateid into sc_status and no longer changed sc_type to 0 while unhashing the stateid. This resulted in kernel oopsing for nfsv4.0 opens that stay around and in nfs4_show_open() would derefence sc_file which was NULL. Instead, for closed open stateids forgo displaying information that relies of having a valid sc_file. To reproduce: mount the server with 4.0, read and close a file and then on the server cat /proc/fs/nfsd/clients/2/states [ 513.590804] Call trace: [ 513.590925] _raw_spin_lock+0xcc/0x160 [ 513.591119] nfs4_show_open+0x78/0x2c0 [nfsd] [ 513.591412] states_show+0x44c/0x488 [nfsd] [ 513.591681] seq_read_iter+0x5d8/0x760 [ 513.591896] seq_read+0x188/0x208 [ 513.592075] vfs_read+0x148/0x470 [ 513.592241] ksys_read+0xcc/0x178 | |||||