Total
5884 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-53297 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Guard mana_remove against double invocation If PM resume fails (e.g., mana_attach() returns an error), mana_probe() calls mana_remove(), which tears down the device and sets gd->gdma_context = NULL and gd->driver_data = NULL. However, a failed resume callback does not automatically unbind the driver. When the device is eventually unbound, mana_remove() is invoked a second time. Without a NULL check, it dereferences gc->dev with gc == NULL, causing a kernel panic. Add an early return if gdma_context or driver_data is NULL so the second invocation is harmless. Move the dev = gc->dev assignment after the guard so it cannot dereference NULL. | |||||
| CVE-2026-53284 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: only release the dirty pages io tree after successful writes [WARNING] With extra warning on dirty extent buffers at umount (aka, the next patch in the series), test case generic/388 can trigger the following warning about dirty extent buffers at unmount time: BTRFS critical (device dm-2 state E): emergency shutdown BTRFS error (device dm-2 state E): error while writing out transaction: -30 BTRFS warning (device dm-2 state E): Skipping commit of aborted transaction. BTRFS error (device dm-2 state EA): Transaction 9 aborted (error -30) BTRFS: error (device dm-2 state EA) in cleanup_transaction:2068: errno=-30 Readonly filesystem BTRFS info (device dm-2 state EA): forced readonly BTRFS info (device dm-2 state EA): last unmount of filesystem 4fbf2e15-f941-49a0-bc7c-716315d2777c ------------[ cut here ]------------ WARNING: disk-io.c:3311 at invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs], CPU#8: umount/914368 CPU: 8 UID: 0 PID: 914368 Comm: umount Tainted: G OE 7.1.0-rc1-custom+ #372 PREEMPT(full) 2de38db8d1deae71fde295430a0ff3ab98ccf596 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs] Call Trace: <TASK> close_ctree+0x52e/0x574 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd] generic_shutdown_super+0x89/0x1a0 kill_anon_super+0x16/0x40 btrfs_kill_super+0x16/0x20 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd] deactivate_locked_super+0x2d/0xb0 cleanup_mnt+0xdc/0x140 task_work_run+0x5a/0xa0 exit_to_user_mode_loop+0x123/0x4b0 do_syscall_64+0x243/0x7c0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- BTRFS warning (device dm-2 state EA): unable to release extent buffer 30539776 owner 9 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30621696 owner 257 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30638080 owner 258 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30654464 owner 7 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30703616 owner 2 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30720000 owner 10 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30736384 owner 4 gen 9 refs 2 flags 0x7 BTRFS warning (device dm-2 state EA): unable to release extent buffer 30752768 owner 11 gen 9 refs 2 flags 0x7 I'm using a stripped down version, which seems to trigger the warning more reliably: _fsstress_pid="" workload() { dmesg -C mkfs.btrfs -f -K $dev > /dev/null echo 1 > /sys/kernel/debug/clear_warn_once mount $dev $mnt $fsstress -w -n 1024 -p 4 -d $mnt & _fsstress_pid=$! sleep 0 $godown $mnt pkill --echo -PIPE fsstress > /dev/null wait $_fsstress_pid unset _fsstress_pid umount $mnt if dmesg | grep -q "WARNING"; then fail fi } for (( i = 0; i < $runtime; i++ )); do echo "=== $i/$runtime ===" workload done [CAUSE] Inside btrfs_write_and_wait_transaction(), we first try to write all dirty ebs, then wait for them to finish. After that we call btrfs_extent_io_tree_release() to free all extent states from dirty_pages io tree. However if we hit an error from btrfs_write_marked_extent(), then we still call btrfs_extent_io_tree_release() to clear that dirty_pages io tree, which may contain dirty records that we haven't yet submitted. Furthermore, the later transaction cleanup path will utilize that dirty_pages io tree to properly cleanup those dirty ebs, but since it's already empty, no dirty ebs are properly cleaned up, thus will later trigger the warnings inside invalidate_btree_folios(). ---truncated--- | |||||
| CVE-2026-53237 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: gpio: mvebu: fix NULL pointer dereference in suspend/resume mvebu_pwm_suspend() and mvebu_pwm_resume() are called for all GPIO banks during suspend/resume, but not all banks have PWM functionality. GPIO banks without PWM have mvchip->mvpwm set to NULL. Calling mvebu_pwm_suspend() with mvpwm == NULL causes a NULL pointer dereference when it tries to access mvpwm->blink_select. Unable to handle kernel NULL pointer dereference at virtual address 00000020 when write [00000020] *pgd=00000000 Internal error: Oops: 815 [#1] PREEMPT ARM Modules linked in: CPU: 0 UID: 0 PID: 406 Comm: sh Not tainted 6.12.74-rt12-yocto-standard-g4e96f98fb7db-dirty #353 Hardware name: Marvell Armada 370/XP (Device Tree) PC is at regmap_mmio_read+0x38/0x54 LR is at regmap_mmio_read+0x38/0x54 pc : [<c05fd2ac>] lr : [<c05fd2ac>] psr: 200f0013 sp : f0c11d10 ip : 00000000 fp : c100d2f0 r10: c14fb854 r9 : 00000000 r8 : 00000000 r7 : c1799c00 r6 : 00000020 r5 : 00000020 r4 : c179c7c0 r3 : f0a231a0 r2 : 00000020 r1 : 00000020 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 135ec059 DAC: 00000051 Call trace: regmap_mmio_read from _regmap_bus_reg_read+0x78/0xac _regmap_bus_reg_read from _regmap_read+0x60/0x154 _regmap_read from regmap_read+0x3c/0x60 regmap_read from mvebu_gpio_suspend+0xa4/0x14c mvebu_gpio_suspend from dpm_run_callback+0x54/0x180 dpm_run_callback from device_suspend+0x124/0x630 device_suspend from dpm_suspend+0x124/0x270 dpm_suspend from dpm_suspend_start+0x64/0x6c dpm_suspend_start from suspend_devices_and_enter+0x140/0x8e8 suspend_devices_and_enter from pm_suspend+0x2fc/0x308 pm_suspend from state_store+0x6c/0xc8 state_store from kernfs_fop_write_iter+0x10c/0x1f8 kernfs_fop_write_iter from vfs_write+0x270/0x468 vfs_write from ksys_write+0x70/0xf0 ksys_write from ret_fast_syscall+0x0/0x54 Add a NULL check for mvchip->mvpwm before calling the PWM suspend/resume functions. | |||||
| CVE-2026-53220 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: revalidate bridge ports ebt_redirect_tg() dereferences br_port_get_rcu() return without a NULL check, causing a kernel panic when the bridge port has been removed between the original hook invocation and an NFQUEUE reinject. A mere NULL check isn't sufficient, however. As sashiko review points out userspace can not only remove the port from the bridge, it could also place the device in a different virtual device, e.g. macvlan. If this happens, we must drop the packet, there is no way for us to reinject it into the bridge path. Switch to _upper API, we don't need the bridge port structure. Also, this fix keeps another bug intact: Both nfnetlink_log and nfnetlink_queue use CONFIG_BRIDGE_NETFILTER too aggressive, which prevents certain logging features when queueing in bridge family: NETFILTER_FAMILY_BRIDGE can be enabled while the old CONFIG_BRIDGE_NETFILTER cruft is off. Fixes tag is a common ancestor, this was always broken. | |||||
| CVE-2026-45877 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: fix NULL-ptr-deref in ishtp_bus_remove_all_clients During a warm reset flow, the cl->device pointer may be NULL if the reset occurs while clients are still being enumerated. Accessing cl->device->reference_count without a NULL check leads to a kernel panic. This issue was identified during multi-unit warm reboot stress clycles. Add a defensive NULL check for cl->device to ensure stability under such intensive testing conditions. KASAN: null-ptr-deref in range [0000000000000000-0000000000000007] Workqueue: ish_fw_update_wq fw_reset_work_fn Call Trace: ishtp_bus_remove_all_clients+0xbe/0x130 [intel_ishtp] ishtp_reset_handler+0x85/0x1a0 [intel_ishtp] fw_reset_work_fn+0x8a/0xc0 [intel_ish_ipc] | |||||
| CVE-2026-43443 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-mach-common: Add missing error check for clock acquisition The acp_card_rt5682_init() and acp_card_rt5682s_init() functions did not check the return values of clk_get(). This could lead to a kernel crash when the invalid pointers are later dereferenced by clock core functions. Fix this by: 1. Changing clk_get() to the device-managed devm_clk_get(). 2. Adding IS_ERR() checks immediately after each clock acquisition. | |||||
| CVE-2026-43413 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Fix NULL pointer exception during user_scan() user_scan() invokes updated sas_user_scan() for channel 0, and if successful, iteratively scans remaining channels (1 to shost->max_channel) via scsi_scan_host_selected() in commit 37c4e72b0651 ("scsi: Fix sas_user_scan() to handle wildcard and multi-channel scans"). However, hisi_sas supports only one channel, and the current value of max_channel is 1. sas_user_scan() for channel 1 will trigger the following NULL pointer exception: [ 441.554662] Unable to handle kernel NULL pointer dereference at virtual address 00000000000008b0 [ 441.554699] Mem abort info: [ 441.554710] ESR = 0x0000000096000004 [ 441.554718] EC = 0x25: DABT (current EL), IL = 32 bits [ 441.554723] SET = 0, FnV = 0 [ 441.554726] EA = 0, S1PTW = 0 [ 441.554730] FSC = 0x04: level 0 translation fault [ 441.554735] Data abort info: [ 441.554737] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 441.554742] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 441.554747] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 441.554752] user pgtable: 4k pages, 48-bit VAs, pgdp=00000828377a6000 [ 441.554757] [00000000000008b0] pgd=0000000000000000, p4d=0000000000000000 [ 441.554769] Internal error: Oops: 0000000096000004 [#1] SMP [ 441.629589] Modules linked in: arm_spe_pmu arm_smmuv3_pmu tpm_tis_spi hisi_uncore_sllc_pmu hisi_uncore_pa_pmu hisi_uncore_l3c_pmu hisi_uncore_hha_pmu hisi_uncore_ddrc_pmu hisi_uncore_cpa_pmu hns3_pmu hisi_ptt hisi_pcie_pmu tpm_tis_core spidev spi_hisi_sfc_v3xx hisi_uncore_pmu spi_dw_mmio fuse hclge hclge_common hisi_sec2 hisi_hpre hisi_zip hisi_qm hns3 hisi_sas_v3_hw sm3_ce sbsa_gwdt hnae3 hisi_sas_main uacce hisi_dma i2c_hisi dm_mirror dm_region_hash dm_log dm_mod [ 441.670819] CPU: 46 UID: 0 PID: 6994 Comm: bash Kdump: loaded Not tainted 7.0.0-rc2+ #84 PREEMPT [ 441.691327] pstate: 81400009 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 441.698277] pc : sas_find_dev_by_rphy+0x44/0x118 [ 441.702896] lr : sas_find_dev_by_rphy+0x3c/0x118 [ 441.707502] sp : ffff80009abbba40 [ 441.710805] x29: ffff80009abbba40 x28: ffff082819a40008 x27: ffff082810c37c08 [ 441.717930] x26: ffff082810c37c28 x25: ffff082819a40290 x24: ffff082810c37c00 [ 441.725054] x23: 0000000000000000 x22: 0000000000000001 x21: ffff082819a40000 [ 441.732179] x20: ffff082819a40290 x19: 0000000000000000 x18: 0000000000000020 [ 441.739304] x17: 0000000000000000 x16: ffffb5dad6bda690 x15: 00000000ffffffff [ 441.746428] x14: ffff082814c3b26c x13: 00000000ffffffff x12: ffff082814c3b26a [ 441.753553] x11: 00000000000000c0 x10: 000000000000003a x9 : ffffb5dad5ea94f4 [ 441.760678] x8 : 000000000000003a x7 : ffff80009abbbab0 x6 : 0000000000000030 [ 441.767802] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 441.774926] x2 : ffff08280f35a300 x1 : ffffb5dad7127180 x0 : 0000000000000000 [ 441.782053] Call trace: [ 441.784488] sas_find_dev_by_rphy+0x44/0x118 (P) [ 441.789095] sas_target_alloc+0x24/0xb0 [ 441.792920] scsi_alloc_target+0x290/0x330 [ 441.797010] __scsi_scan_target+0x88/0x258 [ 441.801096] scsi_scan_channel+0x74/0xb8 [ 441.805008] scsi_scan_host_selected+0x170/0x188 [ 441.809615] sas_user_scan+0xfc/0x148 [ 441.813267] store_scan+0x10c/0x180 [ 441.816743] dev_attr_store+0x20/0x40 [ 441.820398] sysfs_kf_write+0x84/0xa8 [ 441.824054] kernfs_fop_write_iter+0x130/0x1c8 [ 441.828487] vfs_write+0x2c0/0x370 [ 441.831880] ksys_write+0x74/0x118 [ 441.835271] __arm64_sys_write+0x24/0x38 [ 441.839182] invoke_syscall+0x50/0x120 [ 441.842919] el0_svc_common.constprop.0+0xc8/0xf0 [ 441.847611] do_el0_svc+0x24/0x38 [ 441.850913] el0_svc+0x38/0x158 [ 441.854043] el0t_64_sync_handler+0xa0/0xe8 [ 441.858214] el0t_64_sync+0x1ac/0x1b0 [ 441.861865] Code: aa1303e0 97ff70a8 34ffff80 d10a4273 (f9445a75) [ 441.867946] ---[ end trace 0000000000000000 ]--- Therefore ---truncated--- | |||||
| CVE-2026-43271 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: md-cluster: fix NULL pointer dereference in process_metadata_update The function process_metadata_update() blindly dereferences the 'thread' pointer (acquired via rcu_dereference_protected) within the wait_event() macro. While the code comment states "daemon thread must exist", there is a valid race condition window during the MD array startup sequence (md_run): 1. bitmap_load() is called, which invokes md_cluster_ops->join(). 2. join() starts the "cluster_recv" thread (recv_daemon). 3. At this point, recv_daemon is active and processing messages. 4. However, mddev->thread (the main MD thread) is not initialized until later in md_run(). If a METADATA_UPDATED message is received from a remote node during this specific window, process_metadata_update() will be called while mddev->thread is still NULL, leading to a kernel panic. To fix this, we must validate the 'thread' pointer. If it is NULL, we release the held lock (no_new_dev_lockres) and return early, safely ignoring the update request as the array is not yet fully ready to process it. | |||||
| CVE-2026-43213 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: pci: validate sequence number of TX release report Hardware rarely reports abnormal sequence number in TX release report, which will access out-of-bounds of wd_ring->pages array, causing NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1085 Comm: irq/129-rtw89_p Tainted: G S U 6.1.145-17510-g2f3369c91536 #1 (HASH:69e8 1) Call Trace: <IRQ> rtw89_pci_release_tx+0x18f/0x300 [rtw89_pci (HASH:4c83 2)] rtw89_pci_napi_poll+0xc2/0x190 [rtw89_pci (HASH:4c83 2)] net_rx_action+0xfc/0x460 net/core/dev.c:6578 net/core/dev.c:6645 net/core/dev.c:6759 handle_softirqs+0xbe/0x290 kernel/softirq.c:601 ? rtw89_pci_interrupt_threadfn+0xc5/0x350 [rtw89_pci (HASH:4c83 2)] __local_bh_enable_ip+0xeb/0x120 kernel/softirq.c:499 kernel/softirq.c:423 </IRQ> <TASK> rtw89_pci_interrupt_threadfn+0xf8/0x350 [rtw89_pci (HASH:4c83 2)] ? irq_thread+0xa7/0x340 kernel/irq/manage.c:0 irq_thread+0x177/0x340 kernel/irq/manage.c:1205 kernel/irq/manage.c:1314 ? thaw_kernel_threads+0xb0/0xb0 kernel/irq/manage.c:1202 ? irq_forced_thread_fn+0x80/0x80 kernel/irq/manage.c:1220 kthread+0xea/0x110 kernel/kthread.c:376 ? synchronize_irq+0x1a0/0x1a0 kernel/irq/manage.c:1287 ? kthread_associate_blkcg+0x80/0x80 kernel/kthread.c:331 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> To prevent crash, validate rpp_info.seq before using. | |||||
| CVE-2026-43101 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: fix potential NULL dereferences in __ioam6_fill_trace_data() We need to check __in6_dev_get() for possible NULL value, as suggested by Yiming Qian. Also add skb_dst_dev_rcu() instead of skb_dst_dev(), and two missing READ_ONCE(). Note that @dev can't be NULL. | |||||
| CVE-2026-31592 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Protect *all* of sev_mem_enc_register_region() with kvm->lock Take and hold kvm->lock for before checking sev_guest() in sev_mem_enc_register_region(), as sev_guest() isn't stable unless kvm->lock is held (or KVM can guarantee KVM_SEV_INIT{2} has completed and can't rollack state). If KVM_SEV_INIT{2} fails, KVM can end up trying to add to a not-yet-initialized sev->regions_list, e.g. triggering a #GP Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 110 UID: 0 PID: 72717 Comm: syz.15.11462 Tainted: G U W O 6.16.0-smp-DEV #1 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024 RIP: 0010:sev_mem_enc_register_region+0x3f0/0x4f0 ../include/linux/list.h:83 Code: <41> 80 3c 04 00 74 08 4c 89 ff e8 f1 c7 a2 00 49 39 ed 0f 84 c6 00 RSP: 0018:ffff88838647fbb8 EFLAGS: 00010256 RAX: dffffc0000000000 RBX: 1ffff92015cf1e0b RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000001000 RDI: ffff888367870000 RBP: ffffc900ae78f050 R08: ffffea000d9e0007 R09: 1ffffd4001b3c000 R10: dffffc0000000000 R11: fffff94001b3c001 R12: 0000000000000000 R13: ffff8982ab0bde00 R14: ffffc900ae78f058 R15: 0000000000000000 FS: 00007f34e9dc66c0(0000) GS:ffff89ee64d33000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe180adef98 CR3: 000000047210e000 CR4: 0000000000350ef0 Call Trace: <TASK> kvm_arch_vm_ioctl+0xa72/0x1240 ../arch/x86/kvm/x86.c:7371 kvm_vm_ioctl+0x649/0x990 ../virt/kvm/kvm_main.c:5363 __se_sys_ioctl+0x101/0x170 ../fs/ioctl.c:51 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x6f/0x1f0 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f34e9f7e9a9 Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f34e9dc6038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f34ea1a6080 RCX: 00007f34e9f7e9a9 RDX: 0000200000000280 RSI: 000000008010aebb RDI: 0000000000000007 RBP: 00007f34ea000d69 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f34ea1a6080 R15: 00007ffce77197a8 </TASK> with a syzlang reproducer that looks like: syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000040)={0x0, &(0x7f0000000180)=ANY=[], 0x70}) (async) syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000080)={0x0, &(0x7f0000000180)=ANY=[@ANYBLOB="..."], 0x4f}) (async) r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000200), 0x0, 0x0) r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0) r2 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000240), 0x0, 0x0) r3 = ioctl$KVM_CREATE_VM(r2, 0xae01, 0x0) ioctl$KVM_SET_CLOCK(r3, 0xc008aeba, &(0x7f0000000040)={0x1, 0x8, 0x0, 0x5625e9b0}) (async) ioctl$KVM_SET_PIT2(r3, 0x8010aebb, &(0x7f0000000280)={[...], 0x5}) (async) ioctl$KVM_SET_PIT2(r1, 0x4070aea0, 0x0) (async) r4 = ioctl$KVM_CREATE_VM(0xffffffffffffffff, 0xae01, 0x0) openat$kvm(0xffffffffffffff9c, 0x0, 0x0, 0x0) (async) ioctl$KVM_SET_USER_MEMORY_REGION(r4, 0x4020ae46, &(0x7f0000000400)={0x0, 0x0, 0x0, 0x2000, &(0x7f0000001000/0x2000)=nil}) (async) r5 = ioctl$KVM_CREATE_VCPU(r4, 0xae41, 0x2) close(r0) (async) openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x8000, 0x0) (async) ioctl$KVM_SET_GUEST_DEBUG(r5, 0x4048ae9b, &(0x7f0000000300)={0x4376ea830d46549b, 0x0, [0x46, 0x0, 0x0, 0x0, 0x0, 0x1000]}) (async) ioctl$KVM_RUN(r5, 0xae80, 0x0) Opportunistically use guard() to avoid having to define a new error label and goto usage. | |||||
| CVE-2025-71313 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Add missing NULL check for alloc_workqueue() alloc_workqueue() can return NULL on memory allocation failure. Without proper error checking, this may lead to a NULL pointer dereference when queue_work() is later called with the NULL workqueue pointer in epf_ntb_epc_init(). Add a NULL check immediately after alloc_workqueue() and return -ENOMEM on failure to prevent the driver from loading with an invalid workqueue pointer. | |||||
| CVE-2025-71285 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: qrtr: Drop the MHI auto_queue feature for IPCR DL channels MHI stack offers the 'auto_queue' feature, which allows the MHI stack to auto queue the buffers for the RX path (DL channel). Though this feature simplifies the client driver design, it introduces race between the client drivers and the MHI stack. For instance, with auto_queue, the 'dl_callback' for the DL channel may get called before the client driver is fully probed. This means, by the time the dl_callback gets called, the client driver's structures might not be initialized, leading to NULL ptr dereference. Currently, the drivers have to workaround this issue by initializing the internal structures before calling mhi_prepare_for_transfer_autoqueue(). But even so, there is a chance that the client driver's internal code path may call the MHI queue APIs before mhi_prepare_for_transfer_autoqueue() is called, leading to similar NULL ptr dereference. This issue has been reported on the Qcom X1E80100 CRD machines affecting boot. So to properly fix all these races, drop the MHI 'auto_queue' feature altogether and let the client driver (QRTR) manage the RX buffers manually. In the QRTR driver, queue the RX buffers based on the ring length during probe and recycle the buffers in 'dl_callback' once they are consumed. This also warrants removing the setting of 'auto_queue' flag from controller drivers. Currently, this 'auto_queue' feature is only enabled for IPCR DL channel. So only the QRTR client driver requires the modification. | |||||
| CVE-2025-71184 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix NULL dereference on root when tracing inode eviction When evicting an inode the first thing we do is to setup tracing for it, which implies fetching the root's id. But in btrfs_evict_inode() the root might be NULL, as implied in the next check that we do in btrfs_evict_inode(). Hence, we either should set the ->root_objectid to 0 in case the root is NULL, or we move tracing setup after checking that the root is not NULL. Setting the rootid to 0 at least gives us the possibility to trace this call even in the case when the root is NULL, so that's the solution taken here. | |||||
| CVE-2025-71138 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Add missing NULL pointer check for pingpong interface It is checked almost always in dpu_encoder_phys_wb_setup_ctl(), but in a single place the check is missing. Also use convenient locals instead of phys_enc->* where available. Patchwork: https://patchwork.freedesktop.org/patch/693860/ | |||||
| CVE-2025-39851 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix NPD when refreshing an FDB entry with a nexthop object VXLAN FDB entries can point to either a remote destination or an FDB nexthop group. The latter is usually used in EVPN deployments where learning is disabled. However, when learning is enabled, an incoming packet might try to refresh an FDB entry that points to an FDB nexthop group and therefore does not have a remote. Such packets should be dropped, but they are only dropped after dereferencing the non-existent remote, resulting in a NPD [1] which can be reproduced using [2]. Fix by dropping such packets earlier. Remove the misleading comment from first_remote_rcu(). [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 361 Comm: mausezahn Not tainted 6.17.0-rc1-virtme-g9f6b606b6b37 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_snoop+0x98/0x1e0 [...] Call Trace: <TASK> vxlan_encap_bypass+0x209/0x240 encap_bypass_if_local+0xb1/0x100 vxlan_xmit_one+0x1375/0x17e0 vxlan_xmit+0x6b4/0x15f0 dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip address add 192.0.2.2/32 dev lo ip nexthop add id 1 via 192.0.2.3 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 12345 localbypass ip link add name vx1 up type vxlan id 10020 local 192.0.2.2 dstport 54321 learning bridge fdb add 00:11:22:33:44:55 dev vx0 self static dst 192.0.2.2 port 54321 vni 10020 bridge fdb add 00:aa:bb:cc:dd:ee dev vx1 self static nhid 10 mausezahn vx0 -a 00:aa:bb:cc:dd:ee -b 00:11:22:33:44:55 -c 1 -q | |||||
| CVE-2025-39850 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix NPD in {arp,neigh}_reduce() when using nexthop objects When the "proxy" option is enabled on a VXLAN device, the device will suppress ARP requests and IPv6 Neighbor Solicitation messages if it is able to reply on behalf of the remote host. That is, if a matching and valid neighbor entry is configured on the VXLAN device whose MAC address is not behind the "any" remote (0.0.0.0 / ::). The code currently assumes that the FDB entry for the neighbor's MAC address points to a valid remote destination, but this is incorrect if the entry is associated with an FDB nexthop group. This can result in a NPD [1][3] which can be reproduced using [2][4]. Fix by checking that the remote destination exists before dereferencing it. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014 RIP: 0010:vxlan_xmit+0xb58/0x15f0 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 packet_sendmsg+0x113a/0x1850 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 [2] #!/bin/bash ip address add 192.0.2.1/32 dev lo ip nexthop add id 1 via 192.0.2.2 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3 [3] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014 RIP: 0010:vxlan_xmit+0x803/0x1600 [...] Call Trace: <TASK> dev_hard_start_xmit+0x5d/0x1c0 __dev_queue_xmit+0x246/0xfd0 ip6_finish_output2+0x210/0x6c0 ip6_finish_output+0x1af/0x2b0 ip6_mr_output+0x92/0x3e0 ip6_send_skb+0x30/0x90 rawv6_sendmsg+0xe6e/0x12e0 __sock_sendmsg+0x38/0x70 __sys_sendto+0x126/0x180 __x64_sys_sendto+0x24/0x30 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f383422ec77 [4] #!/bin/bash ip address add 2001:db8:1::1/128 dev lo ip nexthop add id 1 via 2001:db8:1::1 fdb ip nexthop add id 10 group 1 fdb ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0 | |||||
| CVE-2025-39705 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix a Null pointer dereference vulnerability [Why] A null pointer dereference vulnerability exists in the AMD display driver's (DC module) cleanup function dc_destruct(). When display control context (dc->ctx) construction fails (due to memory allocation failure), this pointer remains NULL. During subsequent error handling when dc_destruct() is called, there's no NULL check before dereferencing the perf_trace member (dc->ctx->perf_trace), causing a kernel null pointer dereference crash. [How] Check if dc->ctx is non-NULL before dereferencing. (Updated commit text and removed unnecessary error message) (cherry picked from commit 9dd8e2ba268c636c240a918e0a31e6feaee19404) | |||||
| CVE-2025-38705 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix null pointer access Writing a string without delimiters (' ', '\n', '\0') to the under gpu_od/fan_ctrl sysfs or pp_power_profile_mode for the CUSTOM profile will result in a null pointer dereference. | |||||
| CVE-2025-38632 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pinmux: fix race causing mux_owner NULL with active mux_usecount commit 5a3e85c3c397 ("pinmux: Use sequential access to access desc->pinmux data") tried to address the issue when two client of the same gpio calls pinctrl_select_state() for the same functionality, was resulting in NULL pointer issue while accessing desc->mux_owner. However, issue was not completely fixed due to the way it was handled and it can still result in the same NULL pointer. The issue occurs due to the following interleaving: cpu0 (process A) cpu1 (process B) pin_request() { pin_free() { mutex_lock() desc->mux_usecount--; //becomes 0 .. mutex_unlock() mutex_lock(desc->mux) desc->mux_usecount++; // becomes 1 desc->mux_owner = owner; mutex_unlock(desc->mux) mutex_lock(desc->mux) desc->mux_owner = NULL; mutex_unlock(desc->mux) This sequence leads to a state where the pin appears to be in use (`mux_usecount == 1`) but has no owner (`mux_owner == NULL`), which can cause NULL pointer on next pin_request on the same pin. Ensure that updates to mux_usecount and mux_owner are performed atomically under the same lock. Only clear mux_owner when mux_usecount reaches zero and no new owner has been assigned. | |||||