Total
5884 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-57873 | 2026-10-25 | N/A | 7.5 HIGH | ||
| An unauthenticated NULL pointer dereference vulnerability exists in IEEE8021x_upload.cgi in GeoVision GV-LPC2011 and GV-LPC2211 V1.12 and earlier. The vulnerability is caused by improper validation of multipart upload headers when processing certificate-related upload fields. A remote attacker may exploit this vulnerability by sending a malformed multipart request, causing the affected CGI process to crash and resulting in a denial of service. | |||||
| CVE-2026-10648 | 1 Zephyrproject | 1 Zephyr | 2026-10-25 | N/A | 6.2 MEDIUM |
| mcumgr_serial_process_frag() in subsys/mgmt/mcumgr/transport/src/serial_util.c calls net_buf_reset() on the result of smp_packet_alloc() before checking it for NULL. smp_packet_alloc() uses net_buf_alloc(K_NO_WAIT) against the shared MCUmgr packet pool (CONFIG_MCUMGR_TRANSPORT_NETBUF_COUNT, default 4), which returns NULL when the pool is exhausted. In default builds the __ASSERT_NO_MSG in net_buf_reset is a no-op, so net_buf_simple_reset writes through the NULL pointer (buf->len = 0; buf->data = buf->__buf), causing a fault/crash. The fragment data reaches this code from attacker-controlled bytes on the MCUmgr serial/UART/shell-console transports (smp_uart.c, smp_raw_uart.c, smp_shell.c), and a fresh buffer is allocated at the start of essentially every new packet. An attacker on the serial/console link can flood the transport to drive the 4-entry buffer pool to exhaustion and induce the NULL dereference, crashing the device (denial of service). The defect was introduced after the original MCUmgr rework and shipped in Zephyr v4.4.0. The fix moves the NULL check ahead of net_buf_reset. | |||||
| CVE-2026-56017 | 2026-10-25 | N/A | 7.5 HIGH | ||
| JavaScript::Minifier::XS versions before 0.16 for Perl crash with a NULL pointer dereference when the first meaningful token of the input is a slash. The regexp versus division disambiguator in JsTokenizeString (XS.xs) inspects the previous token's last byte to choose between a regexp literal and a division operator. When a slash is the first meaningful token, with the start of input or only whitespace and comments before it, there is no valid preceding token: the walk back over whitespace and comment nodes runs off the head of the node list to NULL, and the byte lookup reads through a NULL contents pointer at an underflowed length index. The following identifier check dereferences the same NULL pointer. The crash is reachable through the public minify() API, so input as small as a single slash byte crashes the calling process. A service that minifies untrusted or third-party JavaScript can be crashed by a remote request, causing denial of service. | |||||
| CVE-2026-58369 | 2026-10-25 | N/A | 5.3 MEDIUM | ||
| Woodpecker before 3.15.0 registers the /api/orgs/lookup/*org_full_name endpoint without authentication middleware, and the LookupOrg handler unconditionally dereferences the session user (user.ForgeID, via ForgeFromUser) when selecting the forge to query. For an unauthenticated request session.User returns nil, so any unauthenticated HTTP request triggers a NULL pointer dereference in the handler. The panic is recovered by gin recovery middleware and the server continues serving (returning HTTP 500), but each request writes a multi-line panic stack trace to the error log. A low-bandwidth unauthenticated attacker can repeatedly probe the endpoint to flood the logs (about 37 lines per request), inflating disk usage and downstream log-ingestion cost and burying legitimate log events. | |||||
| CVE-2026-13084 | 1 Watchguard | 39 Firebox Cloud, Firebox M270, Firebox M290 and 36 more | 2026-10-25 | N/A | 7.5 HIGH |
| A null pointer dereference vulnerability in WatchGuard Fireware OS may allow a remote unauthenticated attacker to create a denial-of-service (DoS) condition by sending specially crafted IKEv2 messages. This vulnerability affects both the Mobile User VPN with IKEv2 and the Branch Office VPN using IKEv2 when configured with a dynamic gateway peer. This vulnerability affects Fireware OS 11.10.2 up to and including 11.12.4_Update1, 12.0 up to and including 12.12 and 2025.1 up to and including 2026.2 | |||||
| CVE-2026-10659 | 1 Zephyrproject | 1 Zephyr | 2026-10-25 | N/A | 4.7 MEDIUM |
| The Dhara flash translation layer disk driver (drivers/disk/ftl_dhara.c) implemented the dhara_nand_ callbacks so that, on a flash error, the error code was written unconditionally through the caller-supplied dhara_error_t err pointer (e.g. *err = DHARA_E_ECC in dhara_nand_read, and similar in dhara_nand_erase/prog/copy). The upstream Dhara library calls these callbacks with err == NULL along its journal-resume binary search: find_last_checkblock() invokes find_checkblock(j, mid, &found, NULL), which forwards the NULL pointer into dhara_nand_read(). This path runs during disk_ftl_access_init() -> dhara_map_resume() whenever the FTL disk is mounted/initialised. If a flash read error (uncorrectable ECC, bad block, controller error) occurs on one of the probed checkpoint pages, the driver dereferences and writes to NULL, faulting the kernel (denial of service). The trigger is conditioned on the NAND medium content/health, which can be influenced by media wear, induced faults, or a corrupted/crafted on-flash image. The fix routes all error assignments through the library's NULL-safe dhara_set_error() helper. Affects Zephyr v4.4.0, where the driver was introduced. | |||||
| CVE-2026-48267 | 1 Adobe | 1 Dng Software Development Kit | 2026-10-25 | N/A | 5.5 MEDIUM |
| DNG SDK versions 1.7.1 2536 and earlier are affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | |||||
| CVE-2026-47220 | 1 Envoyproxy | 1 Envoy | 2026-10-25 | N/A | 7.5 HIGH |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.37.0 until 1.37.5 and 1.38.3, when the %REQUESTED_SERVER_NAME(X:Y)% is used in log format and host related options is specified, like HOST_FIRST, SNI_FIRST, it's possible to crash Envoy when the specified host header is missing in the request headers. This vulnerability is fixed in 1.37.5 and 1.38.3. | |||||
| CVE-2026-15171 | 1 Wireshark | 1 Wireshark | 2026-10-25 | N/A | 5.5 MEDIUM |
| SSH protocol dissector crash in Wireshark 4.6.0 to 4.6.6 and 4.4.0 to 4.4.16 allows denial of service | |||||
| CVE-2026-9639 | 2 Canonical, Linux | 2 Lxd, Linux Kernel | 2026-10-25 | N/A | 6.5 MEDIUM |
| Nil-pointer dereference in CreateCustomVolumeFromBackup in LXD up to version 6.8 and 5.21 on Linux allows an authenticated user with can_create_storage_volumes permissions to cause a denial of service via a specially crafted custom-volume backup tarball that omits the expires_at snapshot field. | |||||
| CVE-2026-10593 | 1 Zephyrproject | 1 Zephyr | 2026-10-25 | N/A | 6.5 MEDIUM |
| The Zephyr Bluetooth LE Audio Basic Audio Profile (BAP) unicast client mishandles peer-supplied ASE state notifications. In unicast_client_ep_qos_state() (subsys/bluetooth/audio/bap_unicast_client.c), the handler writes attacker-controlled QoS fields (interval, framing, phy, sdu, rtn, latency, pd) through the stream->qos pointer with only a stream != NULL guard. stream->qos is NULL for any stream that has been codec-configured via bt_bap_stream_config() but not yet added to a unicast group (it is set only by unicast_group_add_stream()). A malicious or buggy remote ASCS server, to which the local device is connected as a BAP unicast client, can send a GATT notification announcing the ASE has entered the QoS Configured state while the local endpoint is still in the Codec Configured state — a transition the dispatcher explicitly permits — during that window, causing a write through a NULL pointer and a crash (denial of service). The data written is itself remote-controlled. The defect shipped in v4.3.0 and v4.4.0 (and earlier). The fix re-points all BAP QoS storage to the always-valid embedded ep->qos struct, eliminating the NULL dereference. | |||||
| CVE-2026-15184 | 2026-10-25 | 1.7 LOW | 3.3 LOW | ||
| A vulnerability was found in GNU LibreDWG up to 0.13.4. The impacted element is the function dwg_next_entity of the file src/dwg.c of the component DWG File Handler. Performing a manipulation of the argument next_obj results in null pointer dereference. The attack must be initiated from a local position. The exploit has been made public and could be used. Upgrading to version 0.14 is sufficient to resolve this issue. The patch is named dde45dac3c4d902e4d8fed150a8017b9732019c9. Upgrading the affected component is recommended. Different than CVE-2026-9503. | |||||
| CVE-2026-47204 | 1 Envoyproxy | 1 Envoy | 2026-10-25 | N/A | 6.5 MEDIUM |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.26.0 until 1.35.13, 1.36.9, 1.37.5, and 1.38.3, the envoy.filters.http.grpc_stats filter crashes (null pointer dereference / segfault) when a Connect protocol request (Content-Type: application/connect+proto or application/connect+json) hits a direct_response route. A single unauthenticated HTTP request crashes the Envoy process. This vulnerability is fixed in 1.35.13, 1.36.9, 1.37.5, and 1.38.3. | |||||
| CVE-2026-58250 | 1 Linuxfoundation | 1 Nats-server | 2026-10-25 | N/A | 7.5 HIGH |
| NATS Server is a high-performance server for NATS.io, the cloud and edge native messaging system. Prior to 2.12.8 and 2.11.17, an unauthenticated peer with network access to a leafnode listener with compression enabled could crash the server during the pre-authentication leafnode handshake by sending repeated leafnode INFO protocol messages before authentication and account setup completed. This issue is fixed in versions 2.12.8 and 2.11.17. | |||||
| CVE-2026-56288 | 1 Gnu | 1 Patch | 2026-10-25 | N/A | 5.5 MEDIUM |
| GNU patch is vulnerable to a NULL pointer dereference when processing a specially crafted unified-diff patch file. Improper handling of consecutive end-of-file newline markers can corrupt internal hunk (single block of changes in diff) data structures, causing the application to pass a NULL pointer to fwrite() during patch processing. An attacker can trigger this condition with a malicious patch file, causing the utility to crash and resulting in a denial of service. This issue has been fixed in the commit e6d6a4e021660679d7fc9150f981d4920f722313 | |||||
| CVE-2026-20457 | 2026-10-25 | N/A | 5.3 MEDIUM | ||
| In Modem, there is a possible system crash due to improper input validation. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01826924; Issue ID: MSV-7301. | |||||
| CVE-2026-47221 | 1 Envoyproxy | 1 Envoy | 2026-10-25 | N/A | 5.9 MEDIUM |
| Envoy is an open source edge and service proxy designed for cloud-native applications. From 1.18.0 until 1.35.13, 1.36.9, 1.37.5, and 1.38.3, the router filter contains a null pointer dereference vulnerability when handling HTTP 303 (See Other) internal redirects for body-less non-GET/HEAD requests. When a POST, PUT, DELETE, or PATCH request without a body is sent to a route configured with internal redirect policy that includes 303 in redirect_response_codes, and the upstream responds with HTTP 303, the redirect handling code attempts to drain a request body buffer that was never allocated. This results in a segmentation fault that crashes the entire Envoy process. When route configured with internal_redirect_policy including 303 in redirect_response_codes and upstream must return HTTP 303 response, an unauthenticated attacker can exploit this to cause complete denial of service, terminating all active connections. This vulnerability is fixed in 1.35.13, 1.36.9, 1.37.5, and 1.38.3. | |||||
| CVE-2026-10656 | 1 Zephyrproject | 1 Zephyr | 2026-10-25 | N/A | 4.6 MEDIUM |
| The MAX32xxx USB device controller driver (drivers/usb/udc/udc_max32.c, compatible adi_max32_usbhs) dereferenced an endpoint buffer in its OUT and IN transfer-completion handlers without checking it for NULL. udc_event_xfer_out_done() called net_buf_add(buf, ep_request->actlen) immediately after buf = udc_buf_get(ep_cfg), where udc_buf_get() returns NULL when the endpoint FIFO is empty. A transfer-completion event is queued from interrupt context and processed asynchronously by the driver thread; between queuing and processing, the endpoint FIFO can be drained by host-controlled control flow — in particular udc_setup_received() drains the EP0 OUT/IN FIFOs whenever a new SETUP packet arrives, and dequeue/disable/purge paths drain it likewise. A USB host that aborts an in-flight EP0 control transfer with a new SETUP packet (legal USB behavior) can therefore cause a stale XFER_OUT_DONE event to be processed against an empty FIFO, producing net_buf_add(NULL, ...), a near-NULL pointer dereference that faults and crashes the device. No authentication is required; the attacker is the USB host the device is connected to (physical bus access). Impact is denial of service (device crash). The defect was introduced when the MAX32 UDC driver was added and shipped in Zephyr v4.4.0. The fix adds NULL-buffer checks that return early with UDC_EVT_ERROR/-ENOBUFS in both the OUT-done and IN-done handlers. | |||||
| CVE-2026-55783 | 2026-10-25 | N/A | N/A | ||
| NanaZip is the 7-Zip derivative intended for the modern Windows experience. Prior to 6.5.1749.0, NanaZip's seven in-house IInArchive handlers in NanaZip.Codecs unconditionally dereference the caller-supplied Indices array inside Extract when the archive engine signals extract everything by passing Indices as NULL and NumItems as 0xFFFFFFFF. This causes a NULL pointer dereference in the standard Test archive or Extract all code path for WebAssembly, ElectronAsar, Zealfs, Romfs, Ufs, Littlefs, and DotNetSingleFile archives, resulting in a process crash. This issue is fixed in version 6.5.1749.0. | |||||
| CVE-2026-58101 | 1 Jonasbn | 1 Crypt\ | 2026-10-24 | N/A | 7.5 HIGH |
| Crypt::OpenSSL::X509 versions before 2.1.3 for Perl allow denial of service via NULL pointer dereference. X509V3_EXT_d2i(ext) returns NULL when an extension's DER value fails to parse. basicC, ia5string, and auth_att dereference its result without a NULL check. keyid_data also dereferences akid->keyid, which is NULL for an empty AKI SEQUENCE (DER 30 00) even when the parse succeeds. A caller invoking an affected helper on an extension from an untrusted certificate triggers a SIGSEGV that crashes the Perl process. | |||||