Filtered by vendor Samba
Subscribe
Total
266 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-3012 | 2 Redhat, Samba | 3 Enterprise Linux, Openshift Container Platform, Samba | 2026-09-15 | N/A | 8.0 HIGH |
| A flaw was found in Samba’s certificate auto-enrollment Group Policy handling. When certificate auto-enrollment is enabled, Samba may retrieve a CA certificate over an unencrypted HTTP connection and install it into the local trust store without proper verification. An attacker with the ability to intercept or redirect network traffic could exploit this behavior to supply a malicious certificate authority certificate, potentially allowing interception or spoofing of trusted communications. | |||||
| CVE-2026-2340 | 2 Redhat, Samba | 3 Enterprise Linux, Openshift Container Platform, Samba | 2026-09-14 | N/A | 6.5 MEDIUM |
| A flaw was found in Samba’s vfs_worm module. The module is intended to provide write-once, read-many (WORM) protections by preventing modification of files after a configurable grace period. Due to insufficient validation during rename operations, an authenticated user with write access to a share could overwrite a protected file by renaming a newly created file over the existing WORM-protected file. | |||||
| CVE-2026-4408 | 2 Redhat, Samba | 3 Enterprise Linux, Openshift Container Platform, Samba | 2026-09-04 | N/A | 9.0 CRITICAL |
| A flaw was found in Samba. A remote attacker can exploit a misconfiguration in Samba file servers and classic domain controllers that use the "check password script" feature. If this script is configured with the %u substitution character, the client-controlled username is passed without proper escaping of shell meta-characters. This vulnerability allows an attacker to achieve remote command execution on the affected system. This issue primarily affects non-standard configurations where the "check password script" is used with %u and the samba-dcerpcd service is started as a system service. | |||||
| CVE-2026-41035 | 1 Samba | 1 Rsync | 2026-09-04 | N/A | 7.4 HIGH |
| In rsync 3.0.1 through 3.4.1, receive_xattr relies on an untrusted length value during a qsort call, leading to a receiver use-after-free. The victim must run rsync with -X (aka --xattrs). On Linux, many (but not all) common configurations are vulnerable. Non-Linux platforms are more widely vulnerable. | |||||
| CVE-2026-1933 | 2 Redhat, Samba | 3 Enterprise Linux, Openshift Container Platform, Samba | 2026-09-04 | N/A | 7.1 HIGH |
| A flaw was found in Samba’s handling of NTFS-style reparse points on shares configured with read only = yes. Due to missing SMB-layer access checks, authenticated users with underlying filesystem write permissions may create or delete reparse point metadata through SMB operations even on read-only exports. This could allow modification of SMB-visible file behavior, including converting files into symbolic links or other reparse point types. | |||||
| CVE-2026-43618 | 1 Samba | 1 Rsync | 2026-09-01 | N/A | 8.1 HIGH |
| Rsync version 3.4.2 and prior contain an integer overflow vulnerability in the compressed-token decoder where a 32-bit signed counter is not checked for overflow, allowing a malicious sender to trigger an overflow that causes the receiver process to read and return data from outside the intended buffer bounds. Attackers can exploit this vulnerability to disclose process memory contents including environment variables, passwords, heap and stack data, and library memory pointers, significantly reducing ASLR effectiveness and facilitating further exploitation. | |||||
| CVE-2026-4480 | 2 Redhat, Samba | 3 Enterprise Linux, Openshift Container Platform, Samba | 2026-09-01 | N/A | 9.0 CRITICAL |
| A flaw was found in the Samba printing subsystem. Samba passes the client-controlled job description string to the command configured with the "print command" setting via the "%J" substitution character without escaping shell meta characters. A remote attacker could exploit this vulnerability by sending a specially crafted print job description that contains unescaped shell characters. This could lead to remote code execution on the affected system. | |||||
| CVE-2024-12085 | 8 Almalinux, Archlinux, Gentoo and 5 more | 22 Almalinux, Arch Linux, Linux and 19 more | 2026-08-31 | N/A | 7.5 HIGH |
| A flaw was found in rsync which could be triggered when rsync compares file checksums. This flaw allows an attacker to manipulate the checksum length (s2length) to cause a comparison between a checksum and uninitialized memory and leak one byte of uninitialized stack data at a time. | |||||
| CVE-2026-53784 | 1 Samba | 1 Rsync | 2026-08-31 | N/A | 7.1 HIGH |
| rsync before 3.5.0 contains a path traversal vulnerability that allows remote clients to access files outside the intended module root when use chroot is disabled and the module root path or a component of it is a symlink. The daemon calls chdir() to the module root at session initialization without resolving symlinks via realpath() or equivalent, causing subsequent relative-path operations to reference files relative to the symlink target rather than the intended module root, enabling unauthorized file access. | |||||
| CVE-2026-53786 | 1 Samba | 1 Rsync | 2026-08-31 | N/A | 6.5 MEDIUM |
| rsync before 3.5.0 contains a filter rule bypass vulnerability that allows authenticated clients to override module-level filter restrictions by supplying malicious --filter merge file directives. Attackers can inject client-side merge file directives during filter evaluation to introduce rules that supersede daemon module-level restrictions, gaining access to files the module filter was intended to exclude. | |||||
| CVE-2026-53789 | 1 Samba | 1 Rsync | 2026-08-31 | N/A | 6.5 MEDIUM |
| rsync before 3.5.0 contains an improper path handling vulnerability that allows a malicious sender to expand the scope of --delete operations beyond the intended destination subtree by sending a crafted file list that causes rsync to reclassify implied parent directory entries or treat synthetic paths as the transfer root. Attackers can exploit multiple variants including implied parent reclassification, synthetic root path construction, legacy protocol behavior below version 30, and non-directory root handling to cause the receiver to delete files outside the authorized destination directory. | |||||
| CVE-2026-53791 | 1 Samba | 1 Rsync | 2026-08-31 | N/A | 9.1 CRITICAL |
| rsync daemon before 3.5.0 contains an IP address spoofing vulnerability that allows unauthenticated remote attackers to bypass IP-based access controls by sending a crafted PROXY protocol header with a forged source address. Attackers who can connect directly to the rsync daemon can inject a spoofed source IP in the PROXY protocol header to circumvent hosts allow/deny rules, gaining unauthorized access that would otherwise be blocked based on their real source address. | |||||
| CVE-2026-53795 | 1 Samba | 1 Rsync | 2026-08-31 | N/A | 8.1 HIGH |
| rsync before 3.5.0 contains an arbitrary file write vulnerability that allows attackers to write files outside the intended destination tree by specifying an absolute path via --temp-dir or --link-dest options. The rename-confinement logic is bypassed when these options resolve to paths outside the destination tree, enabling attacker-controlled values to write files to arbitrary locations accessible to the rsync process. | |||||
| CVE-2026-53797 | 1 Samba | 1 Rsync | 2026-08-31 | N/A | 4.7 MEDIUM |
| rsync before 3.5.0 contains a symlink race condition vulnerability in the sender's source tree traversal that allows an attacker who can manipulate a parent directory of the source tree to redirect file reads to unintended paths. Attackers can atomically replace a parent directory component with a symlink pointing outside the source root between path resolution and file open operations to disclose file contents outside the intended transfer root. | |||||
| CVE-2026-53798 | 1 Samba | 1 Rsync | 2026-08-31 | N/A | 5.3 MEDIUM |
| rsync before 3.5.0 contains a privilege confusion vulnerability in the name-converter subprocess uid/gid mapping that allows local attackers to cause transferred files to be owned by root by influencing name-converter responses to return empty values. When the name-converter subprocess returns an empty response for a uid or gid lookup, rsync incorrectly interprets it as a successful resolution to uid/gid 0 (root) rather than a lookup failure, and if the name-converter also signals fake super-user status, rsync proceeds with root ownership assignments for transferred files. | |||||
| CVE-2026-53799 | 1 Samba | 1 Rsync | 2026-08-31 | N/A | 6.3 MEDIUM |
| rsync before 3.5.0 contains a symlink race condition vulnerability that allows local attackers to cause rsync to apply arbitrary ACLs or extended attributes to unintended files by substituting a symlink at a predictable destination path between the file write and the subsequent acl_set_file() or lsetxattr() call. Attackers can exploit this timing window to redirect ACL and xattr application through a crafted symlink to files outside the intended destination tree, potentially granting elevated permissions and enabling local privilege escalation. | |||||
| CVE-2026-53800 | 1 Samba | 1 Rsync | 2026-08-31 | N/A | 4.7 MEDIUM |
| rsync before 3.5.0 contains a symlink race condition vulnerability in the --remove-source-files feature that allows attackers with symlink creation access to cause arbitrary file deletion. Attackers can atomically substitute a symlink for a source file between transfer completion and the unlink() call, causing rsync to delete the symlink target rather than the intended source file. | |||||
| CVE-2026-53801 | 1 Samba | 1 Rsync | 2026-08-31 | N/A | 5.9 MEDIUM |
| rsync before 3.5.0 contains a symlink race condition vulnerability in the sender's directory scanning logic that allows attackers to cause the sender to enumerate and transfer files outside the module root's intended subtree. Attackers who can create or manipulate symlinks in a path component of the scanned tree can replace a symlink with a directory entry pointing outside the module root between the lstat() call and the subsequent opendir() call, exposing files beyond the intended root in both daemon-mode and non-daemon sender-side scanning. | |||||
| CVE-2026-53802 | 1 Samba | 1 Rsync | 2026-08-31 | N/A | 7.1 HIGH |
| rsync before 3.5.0 contains an arbitrary file read vulnerability that allows attackers to read files accessible to the rsync daemon process by exploiting symlink following in input configuration file handling including --files-from, --password-file, and filter merge files. Attackers can place a symlink at a predictable --files-from or --password-file path, or supply a --files-from path that escapes the daemon module root, to read arbitrary files accessible to the rsync process. | |||||
| CVE-2026-53803 | 1 Samba | 1 Rsync | 2026-08-31 | N/A | 7.8 HIGH |
| rsync before 3.5.0 contains a symlink following vulnerability that allows local attackers to overwrite arbitrary files by placing a symlink at a predictable output path such as --log-file, --write-batch, or daemon-mode log and statistics paths. Attackers can exploit rsync's failure to reject symlinks during ancillary file writes to redirect output to arbitrary filesystem locations, achieving local privilege escalation on installations where rsync runs with elevated privileges such as setuid or privileged daemon configurations. | |||||