Filtered by vendor Linux
Subscribe
Total
19344 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-45907 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix deadlocks between devlink and netdev instance locks In the mentioned "Fixes" commit, various work tasks triggering devlink health reporter recovery were switched to use netdev_trylock to protect against concurrent tear down of the channels being recovered. But this had the side effect of introducing potential deadlocks because of incorrect lock ordering. The correct lock order is described by the init flow: probe_one -> mlx5_init_one (acquires devlink lock) -> mlx5_init_one_devl_locked -> mlx5_register_device -> mlx5_rescan_drivers_locked -...-> mlx5e_probe -> _mlx5e_probe -> register_netdev (acquires rtnl lock) -> register_netdevice (acquires netdev lock) => devlink lock -> rtnl lock -> netdev lock. But in the current recovery flow, the order is wrong: mlx5e_tx_err_cqe_work (acquires netdev lock) -> mlx5e_reporter_tx_err_cqe -> mlx5e_health_report -> devlink_health_report (acquires devlink lock => boom!) -> devlink_health_reporter_recover -> mlx5e_tx_reporter_recover -> mlx5e_tx_reporter_recover_from_ctx -> mlx5e_tx_reporter_err_cqe_recover The same pattern exists in: mlx5e_reporter_rx_timeout mlx5e_reporter_tx_ptpsq_unhealthy mlx5e_reporter_tx_timeout Fix these by moving the netdev_trylock calls from the work handlers lower in the call stack, in the respective recovery functions, where they are actually necessary. | |||||
| CVE-2026-45908 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix memory leak in amdxdna_ubuf_map The amdxdna_ubuf_map() function allocates memory for sg and internal sg table structures, but it fails to free them if subsequent operations (sg_alloc_table_from_pages or dma_map_sgtable) fail. | |||||
| CVE-2026-45909 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: Drop __initconst from gates Since commit 8ceff24a754a ("clk: mediatek: clk-gate: Refactor mtk_clk_register_gate to use mtk_gate struct") the mtk_gate structs are no longer just used for initialization/registration, but also at runtime. So drop __initconst annotations. | |||||
| CVE-2026-45910 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix race condition in QP timer handlers I encontered the following warning: WARNING: drivers/infiniband/sw/rxe/rxe_task.c:249 at rxe_sched_task+0x1c8/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... libsha1 [last unloaded: ip6_udp_tunnel] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G C 6.19.0-rc5-64k-v8+ #37 PREEMPT Tainted: [C]=CRAP Hardware name: Raspberry Pi 4 Model B Rev 1.2 Call trace: rxe_sched_task+0x1c8/0x238 [rdma_rxe] (P) retransmit_timer+0x130/0x188 [rdma_rxe] call_timer_fn+0x68/0x4d0 __run_timers+0x630/0x888 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:38 at rxe_sched_task+0x1c0/0x238 [rdma_rxe], CPU#0: swapper/0/0 ... WARNING: drivers/infiniband/sw/rxe/rxe_task.c:111 at do_work+0x488/0x5c8 [rdma_rxe], CPU#3: kworker/u17:4/93400 ... refcount_t: underflow; use-after-free. WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x138/0x1a0, CPU#3: kworker/u17:4/93400 The issue is caused by a race condition between retransmit_timer() and rxe_destroy_qp, leading to the Queue Pair's (QP) reference count dropping to zero during timer handler execution. It seems this warning is harmless because rxe_qp_do_cleanup() will flush all pending timers and requests. Example of flow causing the issue: CPU0 CPU1 retransmit_timer() { spin_lock_irqsave rxe_destroy_qp() __rxe_cleanup() __rxe_put() // qp->ref_count decrease to 0 rxe_qp_do_cleanup() { if (qp->valid) { rxe_sched_task() { WARN_ON(rxe_read(task->qp) <= 0); } } spin_unlock_irqrestore } spin_lock_irqsave qp->valid = 0 spin_unlock_irqrestore } Ensure the QP's reference count is maintained and its validity is checked within the timer callbacks by adding calls to rxe_get(qp) and corresponding rxe_put(qp) after use. | |||||
| CVE-2026-45911 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fix role switching during resume If the role change while we are suspended, the cdns3 driver switches to the new mode during resume. However, switching to host mode in this context causes a NULL pointer dereference. The host role's start() operation registers a xhci-hcd device, but its probe is deferred while we are in the resume path. The host role's resume() operation assumes the xhci-hcd device is already probed, which is not the case, leading to the dereference. Since the start() operation of the new role is already called, the resume operation can be skipped. So skip the resume operation for the new role if a role switch occurs during resume. Once the resume sequence is complete, the xhci-hcd device can be probed in case of host mode. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208 Mem abort info: ... Data abort info: ... [0000000000000208] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted 6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPT Hardware name: Texas Instruments J7200 EVM (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usb_hcd_is_primary_hcd+0x0/0x1c lr : cdns_host_resume+0x24/0x5c ... Call trace: usb_hcd_is_primary_hcd+0x0/0x1c (P) cdns_resume+0x6c/0xbc cdns3_controller_resume.isra.0+0xe8/0x17c cdns3_plat_resume+0x18/0x24 platform_pm_resume+0x2c/0x68 dpm_run_callback+0x90/0x248 device_resume+0x100/0x24c dpm_resume+0x190/0x2ec dpm_resume_end+0x18/0x34 suspend_devices_and_enter+0x2b0/0xa44 pm_suspend+0x16c/0x5fc state_store+0x80/0xec kobj_attr_store+0x18/0x2c sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x130/0x1dc vfs_write+0x240/0x370 ksys_write+0x70/0x108 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0x108 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401) ---[ end trace 0000000000000000 ]--- | |||||
| CVE-2026-45912 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: don't cache extent during splitting extent Caching extents during the splitting process is risky, as it may result in stale extents remaining in the status tree. Moreover, in most cases, the corresponding extent block entries are likely already cached before the split happens, making caching here not particularly useful. Assume we have an unwritten extent, and then DIO writes the first half. [UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUUUUUU] extent status tree |<- ->| ----> dio write this range First, when ext4_split_extent_at() splits this extent, it truncates the existing extent and then inserts a new one. During this process, this extent status entry may be shrunk, and calls to ext4_find_extent() and ext4_cache_extents() may occur, which could potentially insert the truncated range as a hole into the extent status tree. After the split is completed, this hole is not replaced with the correct status. [UUUUUUU|UUUUUUUU] on-disk extent U: unwritten extent [UUUUUUU|HHHHHHHH] extent status tree H: hole Then, the outer calling functions will not correct this remaining hole extent either. Finally, if we perform a delayed buffer write on this latter part, it will re-insert the delayed extent and cause an error in space accounting. In adition, if the unwritten extent cache is not shrunk during the splitting, ext4_cache_extents() also conflicts with existing extents when caching extents. In the future, we will add checks when caching extents, which will trigger a warning. Therefore, Do not cache extents that are being split. | |||||
| CVE-2026-45913 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: always update mdb_n_entries for vlan contexts syzbot triggered a warning[1] about the number of mdb entries in a context. It turned out that there are multiple ways to trigger that warning today (some got added during the years), the root cause of the problem is that the increase is done conditionally, and over the years these different conditions increased so there were new ways to trigger the warning, that is to do a decrease which wasn't paired with a previous increase. For example one way to trigger it is with flush: $ ip l add br0 up type bridge vlan_filtering 1 mcast_snooping 1 $ ip l add dumdum up master br0 type dummy $ bridge mdb add dev br0 port dumdum grp 239.0.0.1 permanent vid 1 $ ip link set dev br0 down $ ip link set dev br0 type bridge mcast_vlan_snooping 1 ^^^^ this will enable snooping, but will not update mdb_n_entries because in __br_multicast_enable_port_ctx() we check !netif_running $ bridge mdb flush dev br0 ^^^ this will trigger the warning because it will delete the pg which we added above, which will try to decrease mdb_n_entries Fix the problem by removing the conditional increase and always keep the count up-to-date while the vlan exists. In order to do that we have to first initialize it on port-vlan context creation, and then always increase or decrease the value regardless of mcast options. To keep the current behaviour we have to enforce the mdb limit only if the context is port's or if the port-vlan's mcast snooping is enabled. [1] ------------[ cut here ]------------ n == 0 WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline], CPU#0: syz.4.4607/22043 WARNING: net/bridge/br_multicast.c:718 at br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline], CPU#0: syz.4.4607/22043 WARNING: net/bridge/br_multicast.c:718 at br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825, CPU#0: syz.4.4607/22043 Modules linked in: CPU: 0 UID: 0 PID: 22043 Comm: syz.4.4607 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/24/2026 RIP: 0010:br_multicast_port_ngroups_dec_one net/bridge/br_multicast.c:718 [inline] RIP: 0010:br_multicast_port_ngroups_dec net/bridge/br_multicast.c:771 [inline] RIP: 0010:br_multicast_del_pg+0x1bbe/0x1e20 net/bridge/br_multicast.c:825 Code: 41 5f 5d e9 04 7a 48 f7 e8 3f 73 5c f7 90 0f 0b 90 e9 cf fd ff ff e8 31 73 5c f7 90 0f 0b 90 e9 16 fd ff ff e8 23 73 5c f7 90 <0f> 0b 90 e9 60 fd ff ff e8 15 73 5c f7 eb 05 e8 0e 73 5c f7 48 8b RSP: 0018:ffffc9000c207220 EFLAGS: 00010293 RAX: ffffffff8a68042d RBX: ffff88807c6f1800 RCX: ffff888066e90000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888066e90000 R09: 000000000000000c R10: 000000000000000c R11: 0000000000000000 R12: ffff8880303ef800 R13: dffffc0000000000 R14: ffff888050eb11c4 R15: 1ffff1100a1d6238 FS: 00007fa45921b6c0(0000) GS:ffff8881256f5000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa4591f9ff8 CR3: 0000000081df2000 CR4: 00000000003526f0 Call Trace: <TASK> br_mdb_flush_pgs net/bridge/br_mdb.c:1525 [inline] br_mdb_flush net/bridge/br_mdb.c:1544 [inline] br_mdb_del_bulk+0x5e2/0xb20 net/bridge/br_mdb.c:1561 rtnl_mdb_del+0x48a/0x640 net/core/rtnetlink.c:-1 rtnetlink_rcv_msg+0x77e/0xbe0 net/core/rtnetlink.c:6967 netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550 netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline] netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa68/0xad0 net/socket.c:2592 ___sys_sendmsg+0x2a5/0x360 net/socke ---truncated--- | |||||
| CVE-2026-45914 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Revert "hwmon: (ibmpex) fix use-after-free in high/low store" This reverts commit 6946c726c3f4c36f0f049e6f97e88c510b15f65d. Jean Delvare points out that the patch does not completely fix the reported problem, that it in fact introduces a (new) race condition, and that it may actually not be needed in the first place. Various AI reviews agree. Specific and relevant AI feedback: " This reordering sets the driver data to NULL before removing the sensor attributes in the loop below. ibmpex_show_sensor() retrieves this driver data via dev_get_drvdata() but does not check if it is NULL before dereferencing it to access data->sensors[]. If a userspace process reads a sensor file (like temp1_input) while this delete function is running, could it race with the dev_set_drvdata(..., NULL) call here and crash in ibmpex_show_sensor()? Would it be safer to keep the original order where device_remove_file() is called before clearing the driver data? device_remove_file() should wait for any active sysfs callbacks to complete, which might already prevent the use-after-free this patch intends to fix. " Revert the offending patch. If it can be shown that the originally reported alleged race condition does indeed exist, it can always be re-introduced with a complete fix. | |||||
| CVE-2026-9006 | 3 Ibm, Linux, Microsoft | 6 Aix, I, Websphere Application Server and 3 more | 2026-06-24 | N/A | 7.4 HIGH |
| IBM WebSphere Application Server 9.0, and 8.5 is vulnerable to server-side request forgery (SSRF) with the Ajax Proxy configured. This may allow an attacker to send unauthorized requests from the system, resulting in a security bypass or information disclosure. | |||||
| CVE-2026-8646 | 4 Apple, Ibm, Linux and 1 more | 7 Macos, Aix, I and 4 more | 2026-06-24 | N/A | 7.4 HIGH |
| IBM WebSphere Application Server 9.0 and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to HTTP request smuggling. A remote attacker could smuggle a specially crafted request to the application server thereby allowing the attacker to bypass security controls, spoof identity, escalate privilege, and expose sensitive information. | |||||
| CVE-2026-9320 | 4 Apple, Ibm, Linux and 1 more | 7 Macos, Aix, I and 4 more | 2026-06-23 | N/A | 5.9 MEDIUM |
| IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. | |||||
| CVE-2026-9071 | 4 Apple, Ibm, Linux and 1 more | 7 Macos, Aix, I and 4 more | 2026-06-23 | N/A | 7.5 HIGH |
| IBM WebSphere Application Server 9.0, and 8.5 and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.6 are vulnerable to a denial of service, caused by sending a specially-crafted request. A remote attacker could exploit this vulnerability to cause the server to consume memory resources. | |||||
| CVE-2026-10845 | 3 Ibm, Linux, Microsoft | 6 Aix, I, Websphere Application Server and 3 more | 2026-06-23 | N/A | 7.3 HIGH |
| IBM WebSphere Application Server 8.5 and 9.0 could allow a remote attacker to bypass authentication and gain unauthorized access to JAX-WS applications. | |||||
| CVE-2026-12024 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-23 | N/A | 6.5 MEDIUM |
| Insufficient policy enforcement in DevTools in Google Chrome prior to 149.0.7827.115 allowed a remote attacker to bypass same origin policy via a crafted HTML page. (Chromium security severity: High) | |||||
| CVE-2026-12027 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-23 | N/A | 9.6 CRITICAL |
| Inappropriate implementation in Headless in Google Chrome prior to 149.0.7827.115 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | |||||
| CVE-2026-12014 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-23 | N/A | 8.3 HIGH |
| Use after free in Cast in Google Chrome prior to 149.0.7827.115 allowed an attacker on the local network segment to potentially perform a sandbox escape via malicious network traffic. (Chromium security severity: High) | |||||
| CVE-2026-12008 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-23 | N/A | 8.3 HIGH |
| Use after free in DigitalCredentials in Google Chrome prior to 149.0.7827.115 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical) | |||||
| CVE-2026-12012 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-23 | N/A | 8.1 HIGH |
| Use after free in Network in Google Chrome prior to 149.0.7827.115 allowed an attacker in a privileged network position to potentially exploit heap corruption via malicious network traffic. (Chromium security severity: High) | |||||
| CVE-2026-12015 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-23 | N/A | 5.3 MEDIUM |
| Use after free in Autofill in Google Chrome prior to 149.0.7827.115 allowed a remote attacker who had compromised the renderer process to obtain potentially sensitive information from process memory via a crafted HTML page. (Chromium security severity: High) | |||||
| CVE-2026-12016 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-23 | N/A | 8.3 HIGH |
| Inappropriate implementation in DevTools in Google Chrome prior to 149.0.7827.115 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) | |||||