Filtered by vendor Linux
Subscribe
Total
19806 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-39960 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.3 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: gpiolib: acpi: initialize acpi_gpio_info struct Since commit 7c010d463372 ("gpiolib: acpi: Make sure we fill struct acpi_gpio_info"), uninitialized acpi_gpio_info struct are passed to __acpi_find_gpio() and later in the call stack info->quirks is used in acpi_populate_gpio_lookup. This breaks the i2c_hid_cpi driver: [ 58.122916] i2c_hid_acpi i2c-UNIW0001:00: HID over i2c has not been provided an Int IRQ [ 58.123097] i2c_hid_acpi i2c-UNIW0001:00: probe with driver i2c_hid_acpi failed with error -22 Fix this by initializing the acpi_gpio_info pass to __acpi_find_gpio() | |||||
| CVE-2025-39814 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL pointer dereference in ice_unplug_aux_dev() on reset Issuing a reset when the driver is loaded without RDMA support, will results in a crash as it attempts to remove RDMA's non-existent auxbus device: echo 1 > /sys/class/net/<if>/device/reset BUG: kernel NULL pointer dereference, address: 0000000000000008 ... RIP: 0010:ice_unplug_aux_dev+0x29/0x70 [ice] ... Call Trace: <TASK> ice_prepare_for_reset+0x77/0x260 [ice] pci_dev_save_and_disable+0x2c/0x70 pci_reset_function+0x88/0x130 reset_store+0x5a/0xa0 kernfs_fop_write_iter+0x15e/0x210 vfs_write+0x273/0x520 ksys_write+0x6b/0xe0 do_syscall_64+0x79/0x3b0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ice_unplug_aux_dev() checks pf->cdev_info->adev for NULL pointer, but pf->cdev_info will also be NULL, leading to the deref in the trace above. Introduce a flag to be set when the creation of the auxbus device is successful, to avoid multiple NULL pointer checks in ice_unplug_aux_dev(). | |||||
| CVE-2025-39949 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: qed: Don't collect too many protection override GRC elements In the protection override dump path, the firmware can return far too many GRC elements, resulting in attempting to write past the end of the previously-kmalloc'ed dump buffer. This will result in a kernel panic with reason: BUG: unable to handle kernel paging request at ADDRESS where "ADDRESS" is just past the end of the protection override dump buffer. The start address of the buffer is: p_hwfn->cdev->dbg_features[DBG_FEATURE_PROTECTION_OVERRIDE].dump_buf and the size of the buffer is buf_size in the same data structure. The panic can be arrived at from either the qede Ethernet driver path: [exception RIP: qed_grc_dump_addr_range+0x108] qed_protection_override_dump at ffffffffc02662ed [qed] qed_dbg_protection_override_dump at ffffffffc0267792 [qed] qed_dbg_feature at ffffffffc026aa8f [qed] qed_dbg_all_data at ffffffffc026b211 [qed] qed_fw_fatal_reporter_dump at ffffffffc027298a [qed] devlink_health_do_dump at ffffffff82497f61 devlink_health_report at ffffffff8249cf29 qed_report_fatal_error at ffffffffc0272baf [qed] qede_sp_task at ffffffffc045ed32 [qede] process_one_work at ffffffff81d19783 or the qedf storage driver path: [exception RIP: qed_grc_dump_addr_range+0x108] qed_protection_override_dump at ffffffffc068b2ed [qed] qed_dbg_protection_override_dump at ffffffffc068c792 [qed] qed_dbg_feature at ffffffffc068fa8f [qed] qed_dbg_all_data at ffffffffc0690211 [qed] qed_fw_fatal_reporter_dump at ffffffffc069798a [qed] devlink_health_do_dump at ffffffff8aa95e51 devlink_health_report at ffffffff8aa9ae19 qed_report_fatal_error at ffffffffc0697baf [qed] qed_hw_err_notify at ffffffffc06d32d7 [qed] qed_spq_post at ffffffffc06b1011 [qed] qed_fcoe_destroy_conn at ffffffffc06b2e91 [qed] qedf_cleanup_fcport at ffffffffc05e7597 [qedf] qedf_rport_event_handler at ffffffffc05e7bf7 [qedf] fc_rport_work at ffffffffc02da715 [libfc] process_one_work at ffffffff8a319663 Resolve this by clamping the firmware's return value to the maximum number of legal elements the firmware should return. | |||||
| CVE-2025-39935 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codec: sma1307: Fix memory corruption in sma1307_setting_loaded() The sma1307->set.header_size is how many integers are in the header (there are 8 of them) but instead of allocating space of 8 integers we allocate 8 bytes. This leads to memory corruption when we copy data it on the next line: memcpy(sma1307->set.header, data, sma1307->set.header_size * sizeof(int)); Also since we're immediately copying over the memory in ->set.header, there is no need to zero it in the allocator. Use devm_kmalloc_array() to allocate the memory instead. | |||||
| CVE-2025-39868 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix runtime warning on truncate_folio_batch_exceptionals() Commit 0e2f80afcfa6("fs/dax: ensure all pages are idle prior to filesystem unmount") introduced the WARN_ON_ONCE to capture whether the filesystem has removed all DAX entries or not and applied the fix to xfs and ext4. Apply the missed fix on erofs to fix the runtime warning: [ 5.266254] ------------[ cut here ]------------ [ 5.266274] WARNING: CPU: 6 PID: 3109 at mm/truncate.c:89 truncate_folio_batch_exceptionals+0xff/0x260 [ 5.266294] Modules linked in: [ 5.266999] CPU: 6 UID: 0 PID: 3109 Comm: umount Tainted: G S 6.16.0+ #6 PREEMPT(voluntary) [ 5.267012] Tainted: [S]=CPU_OUT_OF_SPEC [ 5.267017] Hardware name: Dell Inc. OptiPlex 5000/05WXFV, BIOS 1.5.1 08/24/2022 [ 5.267024] RIP: 0010:truncate_folio_batch_exceptionals+0xff/0x260 [ 5.267076] Code: 00 00 41 39 df 7f 11 eb 78 83 c3 01 49 83 c4 08 41 39 df 74 6c 48 63 f3 48 83 fe 1f 0f 83 3c 01 00 00 43 f6 44 26 08 01 74 df <0f> 0b 4a 8b 34 22 4c 89 ef 48 89 55 90 e8 ff 54 1f 00 48 8b 55 90 [ 5.267083] RSP: 0018:ffffc900013f36c8 EFLAGS: 00010202 [ 5.267095] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 5.267101] RDX: ffffc900013f3790 RSI: 0000000000000000 RDI: ffff8882a1407898 [ 5.267108] RBP: ffffc900013f3740 R08: 0000000000000000 R09: 0000000000000000 [ 5.267113] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 5.267119] R13: ffff8882a1407ab8 R14: ffffc900013f3888 R15: 0000000000000001 [ 5.267125] FS: 00007aaa8b437800(0000) GS:ffff88850025b000(0000) knlGS:0000000000000000 [ 5.267132] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.267138] CR2: 00007aaa8b3aac10 CR3: 000000024f764000 CR4: 0000000000f52ef0 [ 5.267144] PKRU: 55555554 [ 5.267150] Call Trace: [ 5.267154] <TASK> [ 5.267181] truncate_inode_pages_range+0x118/0x5e0 [ 5.267193] ? save_trace+0x54/0x390 [ 5.267296] truncate_inode_pages_final+0x43/0x60 [ 5.267309] evict+0x2a4/0x2c0 [ 5.267339] dispose_list+0x39/0x80 [ 5.267352] evict_inodes+0x150/0x1b0 [ 5.267376] generic_shutdown_super+0x41/0x180 [ 5.267390] kill_block_super+0x1b/0x50 [ 5.267402] erofs_kill_sb+0x81/0x90 [erofs] [ 5.267436] deactivate_locked_super+0x32/0xb0 [ 5.267450] deactivate_super+0x46/0x60 [ 5.267460] cleanup_mnt+0xc3/0x170 [ 5.267475] __cleanup_mnt+0x12/0x20 [ 5.267485] task_work_run+0x5d/0xb0 [ 5.267499] exit_to_user_mode_loop+0x144/0x170 [ 5.267512] do_syscall_64+0x2b9/0x7c0 [ 5.267523] ? __lock_acquire+0x665/0x2ce0 [ 5.267535] ? __lock_acquire+0x665/0x2ce0 [ 5.267560] ? lock_acquire+0xcd/0x300 [ 5.267573] ? find_held_lock+0x31/0x90 [ 5.267582] ? mntput_no_expire+0x97/0x4e0 [ 5.267606] ? mntput_no_expire+0xa1/0x4e0 [ 5.267625] ? mntput+0x24/0x50 [ 5.267634] ? path_put+0x1e/0x30 [ 5.267647] ? do_faccessat+0x120/0x2f0 [ 5.267677] ? do_syscall_64+0x1a2/0x7c0 [ 5.267686] ? from_kgid_munged+0x17/0x30 [ 5.267703] ? from_kuid_munged+0x13/0x30 [ 5.267711] ? __do_sys_getuid+0x3d/0x50 [ 5.267724] ? do_syscall_64+0x1a2/0x7c0 [ 5.267732] ? irqentry_exit+0x77/0xb0 [ 5.267743] ? clear_bhb_loop+0x30/0x80 [ 5.267752] ? clear_bhb_loop+0x30/0x80 [ 5.267765] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 5.267772] RIP: 0033:0x7aaa8b32a9fb [ 5.267781] Code: c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 f3 0f 1e fa 31 f6 e9 05 00 00 00 0f 1f 44 00 00 f3 0f 1e fa b8 a6 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 05 c3 0f 1f 40 00 48 8b 15 e9 83 0d 00 f7 d8 [ 5.267787] RSP: 002b:00007ffd7c4c9468 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 [ 5.267796] RAX: 0000000000000000 RBX: 00005a61592a8b00 RCX: 00007aaa8b32a9fb [ 5.267802] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00005a61592b2080 [ 5.267806] RBP: 00007ffd7c4c9540 R08: 00007aaa8b403b20 R09: 0000000000000020 [ 5.267812] R10: 0000000000000001 R11: 0000000000000246 R12: 00005a61592a8c00 [ 5.267817] R13: 00000000 ---truncated--- | |||||
| CVE-2025-39777 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: acomp - Fix CFI failure due to type punning To avoid a crash when control flow integrity is enabled, make the workspace ("stream") free function use a consistent type, and call it through a function pointer that has that same type. | |||||
| CVE-2025-39920 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pcmcia: Add error handling for add_interval() in do_validate_mem() In the do_validate_mem(), the call to add_interval() does not handle errors. If kmalloc() fails in add_interval(), it could result in a null pointer being inserted into the linked list, leading to illegal memory access when sub_interval() is called next. This patch adds an error handling for the add_interval(). If add_interval() returns an error, the function will return early with the error code. | |||||
| CVE-2025-39840 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: audit: fix out-of-bounds read in audit_compare_dname_path() When a watch on dir=/ is combined with an fsnotify event for a single-character name directly under / (e.g., creating /a), an out-of-bounds read can occur in audit_compare_dname_path(). The helper parent_len() returns 1 for "/". In audit_compare_dname_path(), when parentlen equals the full path length (1), the code sets p = path + 1 and pathlen = 1 - 1 = 0. The subsequent loop then dereferences p[pathlen - 1] (i.e., p[-1]), causing an out-of-bounds read. Fix this by adding a pathlen > 0 check to the while loop condition to prevent the out-of-bounds access. [PM: subject tweak, sign-off email fixes] | |||||
| CVE-2025-39957 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: increase scan_ies_len for S1G Currently the S1G capability element is not taken into account for the scan_ies_len, which leads to a buffer length validation failure in ieee80211_prep_hw_scan() and subsequent WARN in __ieee80211_start_scan(). This prevents hw scanning from functioning. To fix ensure we accommodate for the S1G capability length. | |||||
| CVE-2025-39912 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nfs/localio: restore creds before releasing pageio data Otherwise if the nfsd filecache code releases the nfsd_file immediately, it can trigger the BUG_ON(cred == current->cred) in __put_cred() when it puts the nfsd_file->nf_file->f-cred. | |||||
| CVE-2025-38708 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: drbd: add missing kref_get in handle_write_conflicts With `two-primaries` enabled, DRBD tries to detect "concurrent" writes and handle write conflicts, so that even if you write to the same sector simultaneously on both nodes, they end up with the identical data once the writes are completed. In handling "superseeded" writes, we forgot a kref_get, resulting in a premature drbd_destroy_device and use after free, and further to kernel crashes with symptoms. Relevance: No one should use DRBD as a random data generator, and apparently all users of "two-primaries" handle concurrent writes correctly on layer up. That is cluster file systems use some distributed lock manager, and live migration in virtualization environments stops writes on one node before starting writes on the other node. Which means that other than for "test cases", this code path is never taken in real life. FYI, in DRBD 9, things are handled differently nowadays. We still detect "write conflicts", but no longer try to be smart about them. We decided to disconnect hard instead: upper layers must not submit concurrent writes. If they do, that's their fault. | |||||
| CVE-2025-39854 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL access of tx->in_use in ice_ll_ts_intr Recent versions of the E810 firmware have support for an extra interrupt to handle report of the "low latency" Tx timestamps coming from the specialized low latency firmware interface. Instead of polling the registers, software can wait until the low latency interrupt is fired. This logic makes use of the Tx timestamp tracking structure, ice_ptp_tx, as it uses the same "ready" bitmap to track which Tx timestamps complete. Unfortunately, the ice_ll_ts_intr() function does not check if the tracker is initialized before its first access. This results in NULL dereference or use-after-free bugs similar to the issues fixed in the ice_ptp_ts_irq() function. Fix this by only checking the in_use bitmap (and other fields) if the tracker is marked as initialized. The reset flow will clear the init field under lock before it tears the tracker down, thus preventing any use-after-free or NULL access. | |||||
| CVE-2025-39860 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | N/A | 8.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use-after-free in l2cap_sock_cleanup_listen() syzbot reported the splat below without a repro. In the splat, a single thread calling bt_accept_dequeue() freed sk and touched it after that. The root cause would be the racy l2cap_sock_cleanup_listen() call added by the cited commit. bt_accept_dequeue() is called under lock_sock() except for l2cap_sock_release(). Two threads could see the same socket during the list iteration in bt_accept_dequeue(): CPU1 CPU2 (close()) ---- ---- sock_hold(sk) sock_hold(sk); lock_sock(sk) <-- block close() sock_put(sk) bt_accept_unlink(sk) sock_put(sk) <-- refcnt by bt_accept_enqueue() release_sock(sk) lock_sock(sk) sock_put(sk) bt_accept_unlink(sk) sock_put(sk) <-- last refcnt bt_accept_unlink(sk) <-- UAF Depending on the timing, the other thread could show up in the "Freed by task" part. Let's call l2cap_sock_cleanup_listen() under lock_sock() in l2cap_sock_release(). [0]: BUG: KASAN: slab-use-after-free in debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline] BUG: KASAN: slab-use-after-free in do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115 Read of size 4 at addr ffff88803b7eb1c4 by task syz.5.3276/16995 CPU: 3 UID: 0 PID: 16995 Comm: syz.5.3276 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcd/0x630 mm/kasan/report.c:482 kasan_report+0xe0/0x110 mm/kasan/report.c:595 debug_spin_lock_before kernel/locking/spinlock_debug.c:86 [inline] do_raw_spin_lock+0x26f/0x2b0 kernel/locking/spinlock_debug.c:115 spin_lock_bh include/linux/spinlock.h:356 [inline] release_sock+0x21/0x220 net/core/sock.c:3746 bt_accept_dequeue+0x505/0x600 net/bluetooth/af_bluetooth.c:312 l2cap_sock_cleanup_listen+0x5c/0x2a0 net/bluetooth/l2cap_sock.c:1451 l2cap_sock_release+0x5c/0x210 net/bluetooth/l2cap_sock.c:1425 __sock_release+0xb3/0x270 net/socket.c:649 sock_close+0x1c/0x30 net/socket.c:1439 __fput+0x3ff/0xb70 fs/file_table.c:468 task_work_run+0x14d/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xeb/0x110 kernel/entry/common.c:43 exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline] syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline] syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline] do_syscall_64+0x3f6/0x4c0 arch/x86/entry/syscall_64.c:100 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f2accf8ebe9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffdb6cb1378 EFLAGS: 00000246 ORIG_RAX: 00000000000001b4 RAX: 0000000000000000 RBX: 00000000000426fb RCX: 00007f2accf8ebe9 RDX: 0000000000000000 RSI: 000000000000001e RDI: 0000000000000003 RBP: 00007f2acd1b7da0 R08: 0000000000000001 R09: 00000012b6cb166f R10: 0000001b30e20000 R11: 0000000000000246 R12: 00007f2acd1b609c R13: 00007f2acd1b6090 R14: ffffffffffffffff R15: 00007ffdb6cb1490 </TASK> Allocated by task 5326: kasan_save_stack+0x33/0x60 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:388 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:405 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4365 [inline] __kmalloc_nopro ---truncated--- | |||||
| CVE-2025-39722 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: caam - Prevent crash on suspend with iMX8QM / iMX8ULP Since the CAAM on these SoCs is managed by another ARM core, called the SECO (Security Controller) on iMX8QM and Secure Enclave on iMX8ULP, which also reserves access to register page 0 suspend operations cannot touch this page. This is similar to when running OPTEE, where OPTEE will reserve page 0. Track this situation using a new state variable no_page0, reflecting if page 0 is reserved elsewhere, either by other management cores in SoC or by OPTEE. Replace the optee_en check in suspend/resume with the new check. optee_en cannot go away as it's needed elsewhere to gate OPTEE specific situations. Fixes the following splat at suspend: Internal error: synchronous external abort: 0000000096000010 [#1] SMP Hardware name: Freescale i.MX8QXP ACU6C (DT) pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : readl+0x0/0x18 lr : rd_reg32+0x18/0x3c sp : ffffffc08192ba20 x29: ffffffc08192ba20 x28: ffffff8025190000 x27: 0000000000000000 x26: ffffffc0808ae808 x25: ffffffc080922338 x24: ffffff8020e89090 x23: 0000000000000000 x22: ffffffc080922000 x21: ffffff8020e89010 x20: ffffffc080387ef8 x19: ffffff8020e89010 x18: 000000005d8000d5 x17: 0000000030f35963 x16: 000000008f785f3f x15: 000000003b8ef57c x14: 00000000c418aef8 x13: 00000000f5fea526 x12: 0000000000000001 x11: 0000000000000002 x10: 0000000000000001 x9 : 0000000000000000 x8 : ffffff8025190870 x7 : ffffff8021726880 x6 : 0000000000000002 x5 : ffffff80217268f0 x4 : ffffff8021726880 x3 : ffffffc081200000 x2 : 0000000000000001 x1 : ffffff8020e89010 x0 : ffffffc081200004 Call trace: readl+0x0/0x18 caam_ctrl_suspend+0x30/0xdc dpm_run_callback.constprop.0+0x24/0x5c device_suspend+0x170/0x2e8 dpm_suspend+0xa0/0x104 dpm_suspend_start+0x48/0x50 suspend_devices_and_enter+0x7c/0x45c pm_suspend+0x148/0x160 state_store+0xb4/0xf8 kobj_attr_store+0x14/0x24 sysfs_kf_write+0x38/0x48 kernfs_fop_write_iter+0xb4/0x178 vfs_write+0x118/0x178 ksys_write+0x6c/0xd0 __arm64_sys_write+0x14/0x1c invoke_syscall.constprop.0+0x64/0xb0 do_el0_svc+0x90/0xb0 el0_svc+0x18/0x44 el0t_64_sync_handler+0x88/0x124 el0t_64_sync+0x150/0x154 Code: 88dffc21 88dffc21 5ac00800 d65f03c0 (b9400000) | |||||
| CVE-2025-39855 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix NULL access of tx->in_use in ice_ptp_ts_irq The E810 device has support for a "low latency" firmware interface to access and read the Tx timestamps. This interface does not use the standard Tx timestamp logic, due to the latency overhead of proxying sideband command requests over the firmware AdminQ. The logic still makes use of the Tx timestamp tracking structure, ice_ptp_tx, as it uses the same "ready" bitmap to track which Tx timestamps complete. Unfortunately, the ice_ptp_ts_irq() function does not check if the tracker is initialized before its first access. This results in NULL dereference or use-after-free bugs similar to the following: [245977.278756] BUG: kernel NULL pointer dereference, address: 0000000000000000 [245977.278774] RIP: 0010:_find_first_bit+0x19/0x40 [245977.278796] Call Trace: [245977.278809] ? ice_misc_intr+0x364/0x380 [ice] This can occur if a Tx timestamp interrupt races with the driver reset logic. Fix this by only checking the in_use bitmap (and other fields) if the tracker is marked as initialized. The reset flow will clear the init field under lock before it tears the tracker down, thus preventing any use-after-free or NULL access. | |||||
| CVE-2025-38726 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect After the call to phy_disconnect() netdev->phydev is reset to NULL. So fixed_phy_unregister() would be called with a NULL pointer as argument. Therefore cache the phy_device before this call. | |||||
| CVE-2025-39841 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix buffer free/clear order in deferred receive path Fix a use-after-free window by correcting the buffer release sequence in the deferred receive path. The code freed the RQ buffer first and only then cleared the context pointer under the lock. Concurrent paths (e.g., ABTS and the repost path) also inspect and release the same pointer under the lock, so the old order could lead to double-free/UAF. Note that the repost path already uses the correct pattern: detach the pointer under the lock, then free it after dropping the lock. The deferred path should do the same. | |||||
| CVE-2025-39894 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: br_netfilter: do not check confirmed bit in br_nf_local_in() after confirm When send a broadcast packet to a tap device, which was added to a bridge, br_nf_local_in() is called to confirm the conntrack. If another conntrack with the same hash value is added to the hash table, which can be triggered by a normal packet to a non-bridge device, the below warning may happen. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 96 at net/bridge/br_netfilter_hooks.c:632 br_nf_local_in+0x168/0x200 CPU: 1 UID: 0 PID: 96 Comm: tap_send Not tainted 6.17.0-rc2-dirty #44 PREEMPT(voluntary) RIP: 0010:br_nf_local_in+0x168/0x200 Call Trace: <TASK> nf_hook_slow+0x3e/0xf0 br_pass_frame_up+0x103/0x180 br_handle_frame_finish+0x2de/0x5b0 br_nf_hook_thresh+0xc0/0x120 br_nf_pre_routing_finish+0x168/0x3a0 br_nf_pre_routing+0x237/0x5e0 br_handle_frame+0x1ec/0x3c0 __netif_receive_skb_core+0x225/0x1210 __netif_receive_skb_one_core+0x37/0xa0 netif_receive_skb+0x36/0x160 tun_get_user+0xa54/0x10c0 tun_chr_write_iter+0x65/0xb0 vfs_write+0x305/0x410 ksys_write+0x60/0xd0 do_syscall_64+0xa4/0x260 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> ---[ end trace 0000000000000000 ]--- To solve the hash conflict, nf_ct_resolve_clash() try to merge the conntracks, and update skb->_nfct. However, br_nf_local_in() still use the old ct from local variable 'nfct' after confirm(), which leads to this warning. If confirm() does not insert the conntrack entry and return NF_DROP, the warning may also occur. There is no need to reserve the WARN_ON_ONCE, just remove it. | |||||
| CVE-2025-39861 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: vhci: Prevent use-after-free by removing debugfs files early Move the creation of debugfs files into a dedicated function, and ensure they are explicitly removed during vhci_release(), before associated data structures are freed. Previously, debugfs files such as "force_suspend", "force_wakeup", and others were created under hdev->debugfs but not removed in vhci_release(). Since vhci_release() frees the backing vhci_data structure, any access to these files after release would result in use-after-free errors. Although hdev->debugfs is later freed in hci_release_dev(), user can access files after vhci_data is freed but before hdev->debugfs is released. | |||||
| CVE-2025-39780 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: sched/ext: Fix invalid task state transitions on class switch When enabling a sched_ext scheduler, we may trigger invalid task state transitions, resulting in warnings like the following (which can be easily reproduced by running the hotplug selftest in a loop): sched_ext: Invalid task state transition 0 -> 3 for fish[770] WARNING: CPU: 18 PID: 787 at kernel/sched/ext.c:3862 scx_set_task_state+0x7c/0xc0 ... RIP: 0010:scx_set_task_state+0x7c/0xc0 ... Call Trace: <TASK> scx_enable_task+0x11f/0x2e0 switching_to_scx+0x24/0x110 scx_enable.isra.0+0xd14/0x13d0 bpf_struct_ops_link_create+0x136/0x1a0 __sys_bpf+0x1edd/0x2c30 __x64_sys_bpf+0x21/0x30 do_syscall_64+0xbb/0x370 entry_SYSCALL_64_after_hwframe+0x77/0x7f This happens because we skip initialization for tasks that are already dead (with their usage counter set to zero), but we don't exclude them during the scheduling class transition phase. Fix this by also skipping dead tasks during class swiching, preventing invalid task state transitions. | |||||