Total
934 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-53481 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed Following process will trigger an infinite loop in ubi_wl_put_peb(): ubifs_bgt ubi_bgt ubifs_leb_unmap ubi_leb_unmap ubi_eba_unmap_leb ubi_wl_put_peb wear_leveling_worker e1 = rb_entry(rb_first(&ubi->used) e2 = get_peb_for_wl(ubi) ubi_io_read_vid_hdr // return err (flash fault) out_error: ubi->move_from = ubi->move_to = NULL wl_entry_destroy(ubi, e1) ubi->lookuptbl[e->pnum] = NULL retry: e = ubi->lookuptbl[pnum]; // return NULL if (e == ubi->move_from) { // NULL == NULL gets true goto retry; // infinite loop !!! $ top PID USER PR NI VIRT RES SHR S %CPU %MEM COMMAND 7676 root 20 0 0 0 0 R 100.0 0.0 ubifs_bgt0_0 Fix it by: 1) Letting ubi_wl_put_peb() returns directly if wearl leveling entry has been removed from 'ubi->lookuptbl'. 2) Using 'ubi->wl_lock' protecting wl entry deletion to preventing an use-after-free problem for wl entry in ubi_wl_put_peb(). Fetch a reproducer in [Link]. | |||||
| CVE-2023-53026 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix ib block iterator counter overflow When registering a new DMA MR after selecting the best aligned page size for it, we iterate over the given sglist to split each entry to smaller, aligned to the selected page size, DMA blocks. In given circumstances where the sg entry and page size fit certain sizes and the sg entry is not aligned to the selected page size, the total size of the aligned pages we need to cover the sg entry is >= 4GB. Under this circumstances, while iterating page aligned blocks, the counter responsible for counting how much we advanced from the start of the sg entry is overflowed because its type is u32 and we pass 4GB in size. This can lead to an infinite loop inside the iterator function because the overflow prevents the counter to be larger than the size of the sg entry. Fix the presented problem by changing the advancement condition to eliminate overflow. Backtrace: [ 192.374329] efa_reg_user_mr_dmabuf [ 192.376783] efa_register_mr [ 192.382579] pgsz_bitmap 0xfffff000 rounddown 0x80000000 [ 192.386423] pg_sz [0x80000000] umem_length[0xc0000000] [ 192.392657] start 0x0 length 0xc0000000 params.page_shift 31 params.page_num 3 [ 192.399559] hp_cnt[3], pages_in_hp[524288] [ 192.403690] umem->sgt_append.sgt.nents[1] [ 192.407905] number entries: [1], pg_bit: [31] [ 192.411397] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8] [ 192.415601] biter->__sg_advance [665837568] sg_dma_len[3221225472] [ 192.419823] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8] [ 192.423976] biter->__sg_advance [2813321216] sg_dma_len[3221225472] [ 192.428243] biter->__sg_nents [1] biter->__sg [0000000008b0c5d8] [ 192.432397] biter->__sg_advance [665837568] sg_dma_len[3221225472] | |||||
| CVE-2021-47448 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix possible stall on recvmsg() recvmsg() can enter an infinite loop if the caller provides the MSG_WAITALL, the data present in the receive queue is not sufficient to fulfill the request, and no more data is received by the peer. When the above happens, mptcp_wait_data() will always return with no wait, as the MPTCP_DATA_READY flag checked by such function is set and never cleared in such code path. Leveraging the above syzbot was able to trigger an RCU stall: rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=0af/1/0x4000000000000000 softirq=10678/10678 fqs=1 (t=10500 jiffies g=13089 q=109) rcu: rcu_preempt kthread starved for 10497 jiffies! g13089 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task stack:28696 pid: 14 ppid: 2 flags:0x00004000 Call Trace: context_switch kernel/sched/core.c:4955 [inline] __schedule+0x940/0x26f0 kernel/sched/core.c:6236 schedule+0xd3/0x270 kernel/sched/core.c:6315 schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881 rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1955 rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2128 kthread+0x405/0x4f0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8510 Comm: syz-executor827 Not tainted 5.15.0-rc2-next-20210920-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:84 [inline] RIP: 0010:memory_is_nonzero mm/kasan/generic.c:102 [inline] RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:128 [inline] RIP: 0010:memory_is_poisoned mm/kasan/generic.c:159 [inline] RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline] RIP: 0010:kasan_check_range+0xc8/0x180 mm/kasan/generic.c:189 Code: 38 00 74 ed 48 8d 50 08 eb 09 48 83 c0 01 48 39 d0 74 7a 80 38 00 74 f2 48 89 c2 b8 01 00 00 00 48 85 d2 75 56 5b 5d 41 5c c3 <48> 85 d2 74 5e 48 01 ea eb 09 48 83 c0 01 48 39 d0 74 50 80 38 00 RSP: 0018:ffffc9000cd676c8 EFLAGS: 00000283 RAX: ffffed100e9a110e RBX: ffffed100e9a110f RCX: ffffffff88ea062a RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888074d08870 RBP: ffffed100e9a110e R08: 0000000000000001 R09: ffff888074d08877 R10: ffffed100e9a110e R11: 0000000000000000 R12: ffff888074d08000 R13: ffff888074d08000 R14: ffff888074d08088 R15: ffff888074d08000 FS: 0000555556d8e300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000180 CR3: 0000000068909000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: instrument_atomic_read_write include/linux/instrumented.h:101 [inline] test_and_clear_bit include/asm-generic/bitops/instrumented-atomic.h:83 [inline] mptcp_release_cb+0x14a/0x210 net/mptcp/protocol.c:3016 release_sock+0xb4/0x1b0 net/core/sock.c:3204 mptcp_wait_data net/mptcp/protocol.c:1770 [inline] mptcp_recvmsg+0xfd1/0x27b0 net/mptcp/protocol.c:2080 inet6_recvmsg+0x11b/0x5e0 net/ipv6/af_inet6.c:659 sock_recvmsg_nosec net/socket.c:944 [inline] ____sys_recvmsg+0x527/0x600 net/socket.c:2626 ___sys_recvmsg+0x127/0x200 net/socket.c:2670 do_recvmmsg+0x24d/0x6d0 net/socket.c:2764 __sys_recvmmsg net/socket.c:2843 [inline] __do_sys_recvmmsg net/socket.c:2866 [inline] __se_sys_recvmmsg net/socket.c:2859 [inline] __x64_sys_recvmmsg+0x20b/0x260 net/socket.c:2859 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fc200d2 ---truncated--- | |||||
| CVE-2021-47159 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: fix a crash if ->get_sset_count() fails If ds->ops->get_sset_count() fails then it "count" is a negative error code such as -EOPNOTSUPP. Because "i" is an unsigned int, the negative error code is type promoted to a very high value and the loop will corrupt memory until the system crashes. Fix this by checking for error codes and changing the type of "i" to just int. | |||||
| CVE-2026-66730 | 2026-07-31 | N/A | 7.5 HIGH | ||
| facil.io 0.6.0 through 0.7.6 contains a denial-of-service vulnerability in the multipart body parser that allows an unauthenticated remote attacker to permanently freeze worker processes at 100% CPU by sending a multipart/form-data request with a partial closing boundary. The missing progress guard in the parser loop causes http_mime_parse to return 0 bytes consumed without setting done or error flags, causing the calling loop to re-invoke the parser on the same buffer indefinitely, exhausting all workers and permanently disabling the server until manually restarted. | |||||
| CVE-2025-8194 | 2026-07-31 | N/A | 7.5 HIGH | ||
| There is a defect in the CPython “tarfile” module affecting the “TarFile” extraction and entry enumeration APIs. The tar implementation would process tar archives with negative offsets without error, resulting in an infinite loop and deadlock during the parsing of maliciously crafted tar archives. This vulnerability can be mitigated by including the following patch after importing the “tarfile” module: https://gist.github.com/sethmlarson/1716ac5b82b73dbcbf23ad2eff8b33e1 | |||||
| CVE-2026-59933 | 2026-07-30 | N/A | 7.5 HIGH | ||
| PhpSpreadsheet is a pure PHP library for reading and writing spreadsheet files. In versions 4.0.0 through 5.8.0, 3.3.0 through 3.10.6, 2.2.0 through 2.4.6, 2.0.0 through 2.1.17, and all releases up to and including 1.30.5, the OLE reader follows sector chains from attacker-controlled XLS/OLE metadata without detecting cycles or enforcing a maximum chain length. A tiny malformed .xls/OLE file can set the small-block depot sector chain to point back to itself. During normal XLS detection, OLERead::read() appends the same sector data repeatedly until the PHP process exhausts memory. This is reachable from Reader\Xls::canRead() and therefore from automatic spreadsheet type detection. Applications that accept attacker-controlled spreadsheet uploads can suffer denial of service from a very small file. This issue has been fixed in versions 5.8.1, 3.10.7, 2.4.7, 2.1.18 and 1.30.6. | |||||
| CVE-2025-38001 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Address reentrant enqueue adding class to eltree twice Savino says: "We are writing to report that this recent patch (141d34391abbb315d68556b7c67ad97885407547) [1] can be bypassed, and a UAF can still occur when HFSC is utilized with NETEM. The patch only checks the cl->cl_nactive field to determine whether it is the first insertion or not [2], but this field is only incremented by init_vf [3]. By using HFSC_RSC (which uses init_ed) [4], it is possible to bypass the check and insert the class twice in the eltree. Under normal conditions, this would lead to an infinite loop in hfsc_dequeue for the reasons we already explained in this report [5]. However, if TBF is added as root qdisc and it is configured with a very low rate, it can be utilized to prevent packets from being dequeued. This behavior can be exploited to perform subsequent insertions in the HFSC eltree and cause a UAF." To fix both the UAF and the infinite loop, with netem as an hfsc child, check explicitly in hfsc_enqueue whether the class is already in the eltree whenever the HFSC_RSC flag is set. [1] https://web.git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=141d34391abbb315d68556b7c67ad97885407547 [2] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L1572 [3] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L677 [4] https://elixir.bootlin.com/linux/v6.15-rc5/source/net/sched/sch_hfsc.c#L1574 [5] https://lore.kernel.org/netdev/8DuRWwfqjoRDLDmBMlIfbrsZg9Gx50DHJc1ilxsEBNe2D6NMoigR_eIRIG0LOjMc3r10nUUZtArXx4oZBIdUfZQrwjcQhdinnMis_0G7VEk=@willsroot.io/T/#u | |||||
| CVE-2025-21971 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net_sched: Prevent creation of classes with TC_H_ROOT The function qdisc_tree_reduce_backlog() uses TC_H_ROOT as a termination condition when traversing up the qdisc tree to update parent backlog counters. However, if a class is created with classid TC_H_ROOT, the traversal terminates prematurely at this class instead of reaching the actual root qdisc, causing parent statistics to be incorrectly maintained. In case of DRR, this could lead to a crash as reported by Mingi Cho. Prevent the creation of any Qdisc class with classid TC_H_ROOT (0xFFFFFFFF) across all qdisc types, as suggested by Jamal. | |||||
| CVE-2025-21850 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: Fix crash when a namespace is disabled The namespace percpu counter protects pending I/O, and we can only safely diable the namespace once the counter drop to zero. Otherwise we end up with a crash when running blktests/nvme/058 (eg for loop transport): [ 2352.930426] [ T53909] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI [ 2352.930431] [ T53909] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] [ 2352.930434] [ T53909] CPU: 3 UID: 0 PID: 53909 Comm: kworker/u16:5 Tainted: G W 6.13.0-rc6 #232 [ 2352.930438] [ T53909] Tainted: [W]=WARN [ 2352.930440] [ T53909] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014 [ 2352.930443] [ T53909] Workqueue: nvmet-wq nvme_loop_execute_work [nvme_loop] [ 2352.930449] [ T53909] RIP: 0010:blkcg_set_ioprio+0x44/0x180 as the queue is already torn down when calling submit_bio(); So we need to init the percpu counter in nvmet_ns_enable(), and wait for it to drop to zero in nvmet_ns_disable() to avoid having I/O pending after the namespace has been disabled. | |||||
| CVE-2026-64834 | 1 Ffmpeg | 1 Ffmpeg | 2026-07-28 | N/A | 7.5 HIGH |
| FFmpeg versions 0.6.3 through 8.1.2 contain an infinite loop vulnerability in the RTP/ASF demuxer within libavformat/rtpdec_asf.c that allows remote attackers to cause denial of service by sending a crafted RTP/ASF stream. The rtp_asf_fix_header function fails to validate a minimum chunksize when iterating over ASF objects, causing the loop pointer to never advance when a chunksize is smaller than the 24-byte minimum ASF object header size, resulting in CPU exhaustion that denies service to legitimate users. | |||||
| CVE-2026-43871 | 1 Apache | 1 Thrift | 2026-07-27 | N/A | 7.5 HIGH |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Apache Thrift Python, Go, PHP and Java bindings.This issue affects Apache Thrift: before 0.24.0. Users are recommended to upgrade to version 0.24.0, which fixes the issue. | |||||
| CVE-2026-33116 | 3 Apple, Linux, Microsoft | 18 Macos, Linux Kernel, .net and 15 more | 2026-07-25 | N/A | 7.5 HIGH |
| Loop with unreachable exit condition ('infinite loop') in .NET, .NET Framework, Visual Studio allows an unauthorized attacker to deny service over a network. | |||||
| CVE-2026-23451 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bonding: prevent potential infinite loop in bond_header_parse() bond_header_parse() can loop if a stack of two bonding devices is setup, because skb->dev always points to the hierarchy top. Add new "const struct net_device *dev" parameter to (struct header_ops)->parse() method to make sure the recursion is bounded, and that the final leaf parse method is called. | |||||
| CVE-2026-42310 | 1 Python | 1 Pillow | 2026-07-24 | N/A | 5.5 MEDIUM |
| Pillow is a Python imaging library. From version 4.2.0 to before version 12.2.0, an attacker can supply a malicious PDF that causes the process to hang indefinitely, consuming 100% CPU and making the application unresponsive. This issue has been patched in version 12.2.0. | |||||
| CVE-2026-35406 | 1 Containers | 1 Aardvark-dns | 2026-07-24 | N/A | 6.2 MEDIUM |
| Aardvark-dns is an authoritative dns server for A/AAAA container records. From 1.16.0 to 1.17.0, a truncated TCP DNS query followed by a connection reset causes aardvark-dns to enter an unrecoverable infinite error loop at 100% CPU. This vulnerability is fixed in 1.17.1. | |||||
| CVE-2025-71319 | 2 Image-size, Redhat | 5 Image-size, Discovery, Enterprise Linux and 2 more | 2026-07-24 | N/A | 7.5 HIGH |
| image-size through 2.0.2 contains a denial of service vulnerability that allows remote attackers to permanently block the Node.js event loop by supplying a specially crafted image buffer with a zero-valued size field in a recognized box-type. Attackers can trigger an infinite loop in the JXL or HEIF image parsers by providing a crafted image containing a box with a size of zero, causing the offset to never advance and permanently hanging the application. | |||||
| CVE-2026-7771 | 1 Ibm | 1 Db2 | 2026-07-24 | N/A | 5.5 MEDIUM |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.4 is vulnerable to a trap when compiling a specially crafted statements containing subqueries could lead to a denial of service. | |||||
| CVE-2026-54886 | 1 Erlang | 2 Erlang\/otp, Erlang\/ssh | 2026-07-24 | N/A | 4.3 MEDIUM |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Erlang OTP ssh (ssh_sftpd module) allows an authenticated SFTP user to render an SFTP channel permanently unresponsive. The handle_data/4 function in ssh_sftpd contains a catch-all clause that accepts channel data of any type. When channel data with a non-zero type code (SSH_MSG_CHANNEL_EXTENDED_DATA) arrives with an empty pending buffer and a payload at or below the SFTP packet size limit, the clause tail-calls itself with identical arguments, creating an infinite loop. The SFTP protocol operates exclusively on normal channel data (type 0). Extended data (non-zero type) is meaningless for SFTP and is never sent by conforming clients. However, the SSH protocol permits any channel participant to send extended data on an open channel, so an authenticated SFTP client can trigger the loop by sending SSH_MSG_CHANNEL_EXTENDED_DATA with any data_type_code and any non-empty payload at or below the size limit. The targeted ssh_sftpd process enters an infinite tail-recursive loop. It never processes another message, its message queue grows without bound, and it can only be stopped by killing the process. BEAM's reduction-based scheduler preemption continues to function, so other processes on the node are not starved, but each stuck channel process consumes its full CPU time share continuously and accumulates unbounded message queue memory. Opening many channels amplifies the CPU and memory impact. Erlang/OTP SSH configurations using the default max_channels setting (infinity) allow an authenticated user to open unlimited channels per connection, amplifying the attack without requiring multiple TCP connections or authentications. No file contents, credentials, or write access are obtainable through this issue. The impact is limited to denial of service on targeted SFTP channels, with secondary CPU degradation and memory growth. This vulnerability is associated with program file lib/ssh/src/ssh_sftpd.erl and program routine ssh_sftpd:handle_data/4. This issue affects OTP from OTP 17.0 before OTP 29.0.3, OTP 28.5.0.3 and OTP 27.3.4.14, corresponding to ssh from 3.0.1 before 6.0.2, 5.5.2.2 and 5.2.11.9. | |||||
| CVE-2026-50653 | 1 Microsoft | 14 .net Framework, Azure Active Directory, Windows 10 1607 and 11 more | 2026-07-24 | N/A | 7.5 HIGH |
| Loop with unreachable exit condition ('infinite loop') in Azure Active Directory allows an unauthorized attacker to deny service over a network. | |||||