Total
115 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-62707 | 1 Pypdf Project | 1 Pypdf | 2026-06-17 | N/A | 7.5 HIGH |
| pypdf is a free and open-source pure-python PDF library. Prior to version 6.1.3, an attacker who uses this vulnerability can craft a PDF which leads to an infinite loop. This requires parsing the content stream of a page which has an inline image using the DCTDecode filter. This has been fixed in pypdf version 6.1.3. | |||||
| CVE-2025-55181 | 1 Facebook | 1 Proxygen | 2026-06-17 | N/A | 5.3 MEDIUM |
| Sending an HTTP request/response body with greater than 2^31 bytes triggers an infinite loop in proxygen::coro::HTTPQuicCoroSession which blocks the backing event loop and unconditionally appends data to a std::vector per-loop iteration. This issue leads to unbounded memory growth and eventually causes the process to run out of memory. | |||||
| CVE-2024-8049 | 1 Progress | 1 Telerik Document Processing Libraries | 2026-06-17 | N/A | 6.5 MEDIUM |
| In Progress Telerik Document Processing Libraries, versions prior to 2024 Q4 (2024.4.1106), importing a document with unsupported features can lead to excessive processing, leading to excessive use of computing resources leaving the application process unavailable. | |||||
| CVE-2024-4603 | 2026-06-17 | N/A | 5.3 MEDIUM | ||
| Issue summary: Checking excessively long DSA keys or parameters may be very slow. Impact summary: Applications that use the functions EVP_PKEY_param_check() or EVP_PKEY_public_check() to check a DSA public key or DSA parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The functions EVP_PKEY_param_check() or EVP_PKEY_public_check() perform various checks on DSA parameters. Some of those computations take a long time if the modulus (`p` parameter) is too large. Trying to use a very large modulus is slow and OpenSSL will not allow using public keys with a modulus which is over 10,000 bits in length for signature verification. However the key and parameter check functions do not limit the modulus size when performing the checks. An application that calls EVP_PKEY_param_check() or EVP_PKEY_public_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. These functions are not called by OpenSSL itself on untrusted DSA keys so only applications that directly call these functions may be vulnerable. Also vulnerable are the OpenSSL pkey and pkeyparam command line applications when using the `-check` option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are affected by this issue. | |||||
| CVE-2024-4227 | 2026-06-17 | N/A | 7.5 HIGH | ||
| In Genivia gSOAP with a specific configuration an unauthenticated remote attacker can generate a high CPU load when forcing to parse an XML having duplicate ID attributes which can lead to a DoS. | |||||
| CVE-2024-42237 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: firmware: cs_dsp: Validate payload length before processing block Move the payload length check in cs_dsp_load() and cs_dsp_coeff_load() to be done before the block is processed. The check that the length of a block payload does not exceed the number of remaining bytes in the firwmware file buffer was being done near the end of the loop iteration. However, some code before that check used the length field without validating it. | |||||
| CVE-2024-25144 | 1 Liferay | 3 Digital Experience Platform, Dxp, Liferay Portal | 2026-06-17 | N/A | 4.1 MEDIUM |
| The IFrame widget in Liferay Portal 7.2.0 through 7.4.3.26, and older unsupported versions, and Liferay DXP 7.4 before update 27, 7.3 before update 6, 7.2 before fix pack 19, and older unsupported versions does not check the URL of the IFrame, which allows remote authenticated users to cause a denial-of-service (DoS) via a self referencing IFrame. | |||||
| CVE-2024-0842 | 1 Softaculous | 1 Backuply | 2026-06-17 | N/A | 7.5 HIGH |
| The Backuply – Backup, Restore, Migrate and Clone plugin for WordPress is vulnerable to Denial of Service in all versions up to, and including, 1.2.6. This is due to direct access of the backuply/restore_ins.php file and. This makes it possible for unauthenticated attackers to make excessive requests that result in the server running out of resources. | |||||
| CVE-2023-5632 | 1 Eclipse | 1 Mosquitto | 2026-06-17 | N/A | 7.5 HIGH |
| In Eclipse Mosquito before and including 2.0.5, establishing a connection to the mosquitto server without sending data causes the EPOLLOUT event to be added, which results excessive CPU consumption. This could be used by a malicious actor to perform denial of service type attack. This issue is fixed in 2.0.6 | |||||
| CVE-2023-4043 | 1 Eclipse | 1 Parsson | 2026-06-17 | N/A | 5.9 MEDIUM |
| In Eclipse Parsson before versions 1.1.4 and 1.0.5, Parsing JSON from untrusted sources can lead malicious actors to exploit the fact that the built-in support for parsing numbers with large scale in Java has a number of edge cases where the input text of a number can lead to much larger processing time than one would expect. To mitigate the risk, parsson put in place a size limit for the numbers as well as their scale. | |||||
| CVE-2023-49316 | 1 Phpseclib | 1 Phpseclib | 2026-06-17 | N/A | 7.5 HIGH |
| In Math/BinaryField.php in phpseclib 3 before 3.0.34, excessively large degrees can lead to a denial of service. | |||||
| CVE-2023-3817 | 1 Openssl | 1 Openssl | 2026-06-17 | N/A | 5.3 MEDIUM |
| Issue summary: Checking excessively long DH keys or parameters may be very slow. Impact summary: Applications that use the functions DH_check(), DH_check_ex() or EVP_PKEY_param_check() to check a DH key or DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. The function DH_check() performs various checks on DH parameters. After fixing CVE-2023-3446 it was discovered that a large q parameter value can also trigger an overly long computation during some of these checks. A correct q value, if present, cannot be larger than the modulus p parameter, thus it is unnecessary to perform these checks if q is larger than p. An application that calls DH_check() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. The function DH_check() is itself called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DH_check_ex() and EVP_PKEY_param_check(). Also vulnerable are the OpenSSL dhparam and pkeyparam command line applications when using the "-check" option. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue. | |||||
| CVE-2023-38200 | 3 Fedoraproject, Keylime, Redhat | 9 Fedora, Keylime, Enterprise Linux and 6 more | 2026-06-17 | N/A | 7.5 HIGH |
| A flaw was found in Keylime. Due to their blocking nature, the Keylime registrar is subject to a remote denial of service against its SSL connections. This flaw allows an attacker to exhaust all available connections. | |||||
| CVE-2023-33953 | 1 Grpc | 1 Grpc | 2026-06-17 | N/A | 7.5 HIGH |
| gRPC contains a vulnerability that allows hpack table accounting errors could lead to unwanted disconnects between clients and servers in exceptional cases/ Three vectors were found that allow the following DOS attacks: - Unbounded memory buffering in the HPACK parser - Unbounded CPU consumption in the HPACK parser The unbounded CPU consumption is down to a copy that occurred per-input-block in the parser, and because that could be unbounded due to the memory copy bug we end up with an O(n^2) parsing loop, with n selected by the client. The unbounded memory buffering bugs: - The header size limit check was behind the string reading code, so we needed to first buffer up to a 4 gigabyte string before rejecting it as longer than 8 or 16kb. - HPACK varints have an encoding quirk whereby an infinite number of 0’s can be added at the start of an integer. gRPC’s hpack parser needed to read all of them before concluding a parse. - gRPC’s metadata overflow check was performed per frame, so that the following sequence of frames could cause infinite buffering: HEADERS: containing a: 1 CONTINUATION: containing a: 2 CONTINUATION: containing a: 3 etc… | |||||
| CVE-2023-30226 | 1 Rizin | 1 Rizin | 2026-06-17 | N/A | 5.5 MEDIUM |
| An issue was discovered in function get_gnu_verneed in rizinorg Rizin prior to 0.5.0 verneed_entry allows attackers to cause a denial of service via crafted elf file. | |||||
| CVE-2023-29407 | 2 Fedoraproject, Golang | 2 Fedora, Image | 2026-06-17 | N/A | 6.5 MEDIUM |
| A maliciously-crafted image can cause excessive CPU consumption in decoding. A tiled image with a height of 0 and a very large width can cause excessive CPU consumption, despite the image size (width * height) appearing to be zero. | |||||
| CVE-2023-26513 | 1 Apache | 1 Sling Resource Merger | 2026-06-17 | N/A | 7.5 HIGH |
| Excessive Iteration vulnerability in Apache Software Foundation Apache Sling Resource Merger.This issue affects Apache Sling Resource Merger: from 1.2.0 before 1.4.2. | |||||
| CVE-2023-1993 | 3 Debian, Fedoraproject, Wireshark | 3 Debian Linux, Fedora, Wireshark | 2026-06-17 | N/A | 6.3 MEDIUM |
| LISP dissector large loop in Wireshark 4.0.0 to 4.0.4 and 3.6.0 to 3.6.12 allows denial of service via packet injection or crafted capture file | |||||
| CVE-2023-0411 | 1 Wireshark | 1 Wireshark | 2026-06-17 | N/A | 6.3 MEDIUM |
| Excessive loops in multiple dissectors in Wireshark 4.0.0 to 4.0.2 and 3.6.0 to 3.6.10 and allows denial of service via packet injection or crafted capture file | |||||
| CVE-2022-48939 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 3.3 LOW |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Add schedule points in batch ops syzbot reported various soft lockups caused by bpf batch operations. INFO: task kworker/1:1:27 blocked for more than 140 seconds. INFO: task hung in rcu_barrier Nothing prevents batch ops to process huge amount of data, we need to add schedule points in them. Note that maybe_wait_bpf_programs(map) calls from generic_map_delete_batch() can be factorized by moving the call after the loop. This will be done later in -next tree once we get this fix merged, unless there is strong opinion doing this optimization sooner. | |||||