Total
2350 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-63299 | 1 Canonical | 1 Lxd | 2026-09-11 | N/A | 9.9 CRITICAL |
| An authorization bypass vulnerability in LXD allows an authenticated user to bypass project-level disk and volume limits. Two related code paths fail to verify resource limits during volume operations: the storagePoolVolumeTypePostMove function omits the limits.AllowVolumeCreation check before moving a volume across projects, and volume snapshot restore operations skip the AllowVolumeUpdate check when the configuration is nil (Config == nil). An attacker can exploit these flaws to allocate storage resources that exceed the administrative limits configured for a project. | |||||
| CVE-2026-48779 | 1 Ws Project | 1 Ws | 2026-09-11 | N/A | 7.5 HIGH |
| ws is an open source WebSocket client and server for Node.js. All versions from 1.1.0 up to (but not including) 5.2.5, from 6.0.0 up to 6.2.4, from 7.0.0 up to 7.5.11, and from 8.0.0 up to 8.21.0 are affected by a memory exhaustion DoS vulnerability. A peer can send a high volume of exceptionally small fragments and data chunks, with modest network traffic, to force the remote peer into allocating and holding structural wrappers that consume far more memory than the default documented message-size limit, leading to process termination due to OOM. This issue has been fixed in versions 5.2.5, 6.2.4, 7.5.11, and 8.21.0. | |||||
| CVE-2026-45416 | 1 Netty | 1 Netty | 2026-09-11 | N/A | 7.5 HIGH |
| Netty is a network application framework for development of protocol servers and clients. Prior to versions 4.1.135.Final and 4.2.15.Final, SslClientHelloHandler.decode() reads the 24-bit TLS handshake length and, when the ClientHello does not fit in the first record, eagerly allocates `ctx.alloc().buffer(handshakeLength)` (line 161). The guard at line 140 is `handshakeLength > maxClientHelloLength && maxClientHelloLength != 0`, and the commonly-used SniHandler/AbstractSniHandler constructors (SniHandler(Mapping), SniHandler(AsyncMapping), AbstractSniHandler()) pass maxClientHelloLength=0 and handshakeTimeoutMillis=0, so the length guard is disabled and no timeout is scheduled. A 16 MiB request exceeds the default pooled chunk size and becomes a huge/unpooled allocation performed immediately. The buffer is retained in the handler until the channel closes. Versions 4.1.135.Final and 4.2.15.Final patch the issue. | |||||
| CVE-2026-44488 | 1 Axios | 1 Axios | 2026-09-11 | N/A | 7.5 HIGH |
| Axios is a promise based HTTP client for the browser and Node.js. Axios versions 1.7.0 through 1.15.x did not enforce configured request and response size limits when requests were sent with the fetch adapter. Applications that selected adapter: 'fetch', or ran in environments where axios resolved to the fetch adapter, could receive or send bodies larger than maxContentLength or maxBodyLength despite those limits being explicitly configured. This can cause resource exhaustion in server-side usage when a malicious or compromised server returns an oversized response, when an attacker can supply a large data: URL, or when an application forwards attacker-controlled request bodies through axios while relying on maxBodyLength as a boundary. This vulnerability is fixed in 0.32.0 and 1.16.0. | |||||
| CVE-2026-44248 | 1 Netty | 1 Netty | 2026-09-11 | N/A | 5.3 MEDIUM |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, the MQTT 5 header Properties section is parsed and buffered before any message size limit is applied. Specifically, in MqttDecoder, the decodeVariableHeader() method is called before the bytesRemainingBeforeVariableHeader > maxBytesInMessage check. The decodeVariableHeader() can call other methods which will call decodeProperties(). Effectively, Netty does not apply any limits to the size of the properties being decoded. Additionally, because MqttDecoder extends ReplayingDecoder, Netty will repeatedly re-parse the enormous Properties sections and buffer the bytes in memory, until the entire thing parses to completion. This can cause high resource usage in both CPU and memory. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final. | |||||
| CVE-2026-42587 | 1 Netty | 1 Netty | 2026-09-11 | N/A | 7.5 HIGH |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.2.13.Final and 4.1.133.Final, HttpContentDecompressor accepts a maxAllocation parameter to limit decompression buffer size and prevent decompression bomb attacks. This limit is correctly enforced for gzip and deflate encodings via ZlibDecoder, but is silently ignored when the content encoding is br (Brotli), zstd, or snappy. An attacker can bypass the configured decompression limit by sending a compressed payload with Content-Encoding: br instead of Content-Encoding: gzip, causing unbounded memory allocation and out-of-memory denial of service. The same vulnerability exists in DelegatingDecompressorFrameListener for HTTP/2 connections. This vulnerability is fixed in 4.2.13.Final and 4.1.133.Final. | |||||
| CVE-2026-42198 | 1 Postgresql | 1 Postgresql Jdbc Driver | 2026-09-11 | N/A | 7.5 HIGH |
| pgjdbc is an open source postgresql JDBC Driver. From version 42.2.0 to before version 42.7.11, pgjdbc is vulnerable to a client-side denial of service during SCRAM-SHA-256 authentication. A malicious server can instruct the driver to perform SCRAM authentication with a very large iteration count. With a large enough value, the client spends an unbounded amount of CPU time inside PBKDF2 before authentication can fail. A single attempt ties up a CPU core. Repeated or concurrent attempts exhaust client CPU and can wedge connection pools. In affected versions, loginTimeout did not fully mitigate this problem. When loginTimeout expired, the caller could stop waiting, but the worker thread performing the connection attempt could continue running and burning CPU inside the SCRAM PBKDF2 computation. This issue has been patched in version 42.7.11. | |||||
| CVE-2026-35469 | 2026-09-11 | N/A | 6.5 MEDIUM | ||
| spdystream is a Go library for multiplexing streams over SPDY connections. In versions 0.5.0 and below, the SPDY/3 frame parser does not validate attacker-controlled counts and lengths before allocating memory. Three allocation paths are affected: the SETTINGS frame entry count, the header count in parseHeaderValueBlock, and individual header field sizes — all read as 32-bit integers and used directly as allocation sizes with no bounds checking. Because SPDY header blocks are zlib-compressed, a small on-the-wire payload can decompress into large attacker-controlled values. A remote peer that can send SPDY frames to a service using spdystream can exhaust process memory and cause an out-of-memory crash with a single crafted control frame. This issue has been fixed in version 0.5.1. | |||||
| CVE-2026-29181 | 1 Opentelemetry | 1 Opentelemetry | 2026-09-11 | N/A | 7.5 HIGH |
| OpenTelemetry-Go is the Go implementation of OpenTelemetry. From 1.36.0 to 1.40.0, multi-value baggage: header extraction parses each header field-value independently and aggregates members across values. This allows an attacker to amplify cpu and allocations by sending many baggage: header lines, even when each individual value is within the 8192-byte per-value parse limit. This vulnerability is fixed in 1.41.0. | |||||
| CVE-2026-12151 | 1 Nodejs | 1 Undici | 2026-09-11 | N/A | 7.5 HIGH |
| Impact: The undici WebSocket client enforces maxPayloadSize on the cumulative byte count of fragments in a message but does not enforce a limit on the number of fragments. A malicious WebSocket server can stream many small or empty continuation frames that each pass per-frame and cumulative-size validation, collectively causing unbounded memory growth in the client process. The result is memory exhaustion and a denial of service. Affected applications are those using the undici WebSocket client (new WebSocket(...)) or the WebSocketStream API that can be induced to connect to an attacker-controlled or compromised WebSocket endpoint. All releases starting at undici 6.17.0 are affected. Patches: Upgrade to undici >= 6.26.0, >= 7.28.0, or >= 8.5.0. Workarounds: No workaround is available. The fix must be applied through an upgrade. | |||||
| CVE-2026-73493 | 2026-09-10 | N/A | 7.5 HIGH | ||
| Http4s (http4s-blaze-server) is a minimal, idiomatic Scala interface for HTTP services. Prior to 0.23.18 and 1.0.0-M42, http4s-blaze-server aggregates fragments of an incoming WebSocket message with no limit on total size or fragment count. A client that completes a WebSocket handshake can send an unterminated fragmented message and drive unbounded heap growth in the server JVM, resulting in denial of service through OutOfMemoryError. Any http4s application serving WebSocket routes over BlazeServerBuilder is affected, no non-default configuration is required, and maxWebSocketBufferSize does not bound the aggregate because it bounds only individual frames. A single connection sending continuation frames that never set FIN forces the server to buffer every fragment until the heap is exhausted, terminating the JVM with OutOfMemoryError on the blaze selector thread. Small fragments amplify the cost through per-frame object overhead, so a modest volume of wire bytes is sufficient. This issue is fixed in versions 0.23.18 and 1.0.0-M42. | |||||
| CVE-2026-48804 | 2026-09-10 | N/A | 7.5 HIGH | ||
| python-socketio is a Python implementation of the Socket.IO realtime client and server. The python-socketio server stores binary `EVENT` and `ACK` messages in memory while it waits to receive their binary attachments. Once all the attachments are received, these messages are then processed. Prior to version 5.16.4, an attacker can submit a binary message and intentionally omit sending one or more of its attachments to cause the message along with the partial list of received attachments to stay in memory for a long time. Version 5.16.4 takes the following measures to address this issue: Binary packets are only accepted from authenticated clients and, when a client disconnects, the server checks if there is a partial binary message being held for the client and deletes it. | |||||
| CVE-2026-73565 | 2026-09-10 | N/A | 5.3 MEDIUM | ||
| @hono/node-server allows running the Hono application on Node.js. From 2.0.0 until 2.0.10, a WebSocket upgrade request to an upgradeWebSocket route with a missing or malformed Sec-WebSocket-Key header causes src/websocket.ts to retain the request's IncomingMessage in waiterMap and leave waitForWebSocket pending because ws.handleUpgrade emits no connection event. The aborted handshake therefore has no cleanup path, allowing an unauthenticated attacker to flood a public route, cause unbounded memory growth, and eventually make the service unavailable. This issue is fixed in version 2.0.10. | |||||
| CVE-2026-54638 | 2026-09-10 | N/A | 7.5 HIGH | ||
| gotd/td is a T Telegram MTProto API client in Go. Prior to 0.145.1, proto.UnencryptedMessage.Decode in proto/unencrypted_message.go read attacker controlled dataLen from an unauthenticated MTProto unencrypted packet and allocated make([]byte, dataLen) before checking the remaining buffer, allowing remote unauthenticated denial of service through excessive memory allocation and CPU or garbage collection pressure. This issue is fixed in version 0.145.1. | |||||
| CVE-2026-45763 | 2026-09-10 | N/A | 5.9 MEDIUM | ||
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Starting in version 8.0.0 and prior to version 8.0.5, when Lua rule execution is enabled, the Lua sandbox memory limit was not consistently enforced for new allocations. Certain Lua allocation patterns could exceed `security.lua.max-bytes` without triggering the intended memory limit, making the configured sandbox limit unreliable. This requires Lua rules to be enabled and an affected Lua script/rule to be loaded. Version 8.0.5 contains a fix. As a workaround, disable `security.lua.allow-rules` unless Lua rules are required. | |||||
| CVE-2026-73541 | 1 Zenhive | 1 Machine Payments Protocol | 2026-09-10 | N/A | 8.2 HIGH |
| Allocation of Resources Without Limits or Throttling in ZenHive mpp allows an unauthenticated remote client to drain the fee-payer wallet through concurrent sponsored payments, denying service to legitimate payers once it is empty. MPP.Methods.Tempo.FeePayerPolicy enforces its ceilings (max_gas, max_fee_per_gas, max_priority_fee_per_gas, the worst-case gas_limit * max_fee_per_gas <= max_total_fee budget cap, and a validity window) against one transaction at a time, and nothing accounts for exposure across concurrent requests. reserve_hash_atomic/2 is keyed on the transaction hash, so it prevents duplicate broadcast of the same signed transaction but not N distinct sponsored transactions carrying distinct expiring nonces. Committed sponsor exposure is therefore N times max_total_fee, bounded by nothing in the library, and the default 900 second validity window lets co-signed transactions stay broadcastable and uncounted for that entire period. This issue affects mpp: from 0.2.0 before 0.12.0. | |||||
| CVE-2026-4897 | 2 Freedesktop, Redhat | 3 Polkit, Enterprise Linux, Openshift Container Platform | 2026-09-10 | N/A | 5.5 MEDIUM |
| A flaw was found in polkit. A local user can exploit this by providing a specially crafted, excessively long input to the `polkit-agent-helper-1` setuid binary via standard input (stdin). This unbounded input can lead to an out-of-memory (OOM) condition, resulting in a Denial of Service (DoS) for the system. | |||||
| CVE-2026-15588 | 2026-09-10 | N/A | 5.3 MEDIUM | ||
| A denial-of-service and resource exhaustion vulnerability exists within the `GDBus` component of GLib. The `gdbusauth` authentication mechanism fails to enforce proper length limitations on data lines read from a client. An unauthenticated local or remote attacker can exploit this lack of input validation by sending excessively long streams of data, causing the application to consume massive amounts of system memory and CPU, potentially leading to a crash or system hang. | |||||
| CVE-2026-85664 | 2026-09-10 | N/A | 7.5 HIGH | ||
| Chroma 1.5.9 fails to validate maximum bounds on HNSW index parameters max_neighbors, ef_construction, and ef_search in collection-create requests. Unauthenticated attackers can supply arbitrarily large parameter values to exhaust server memory and cause denial of service during index compaction. | |||||
| CVE-2026-85581 | 2026-09-10 | N/A | 7.5 HIGH | ||
| SiYuan before v3.8.2 contains a denial of service vulnerability in the unauthenticated /api/system/uiproc endpoint that accepts and retains attacker-controlled process identifiers without size limits or authentication. Attackers can send repeated requests with unique identifiers to exhaust process memory and degrade service availability. | |||||