Total
169 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-53671 | 2026-09-09 | N/A | N/A | ||
| PREVAIL is a Polynomial-Runtime EBPF Verifier using an Abstract Interpretation Layer. Prior to version 0.2.4, the abstract transformer in prevail treats writes through a T_CTX-typed base register as a silent no-op: do_mem_store in src/crab/ebpf_transformer.cpp only models T_STACK stores, and the checker's T_CTX bounds arm never tests AccessType::write. An attacker can craft an eBPF program that overwrites a context field (e.g., ctx->data), reload that field typed as T_PACKET, and dereference an attacker-controlled address — and prevail will report the program as safe. This issue has been patched in version 0.2.4. | |||||
| CVE-2026-53706 | 2026-09-09 | N/A | N/A | ||
| PREVAIL is a Polynomial-Runtime EBPF Verifier using an Abstract Interpretation Layer. Prior to version 0.2.4, the prevail eBPF verifier accepts ALU32 ADD and SUB instructions that operate on pointer-typed registers without checking the is64 flag. Because ALU32 arithmetic zero-extends the 32-bit result, the upper half of any pointer is silently destroyed at runtime, yet prevail marks the program as verified safe. Any caller that can submit an eBPF program for verification — including unprivileged users on kernels that permit BPF program loading — can produce a program that passes verification but faults or misbehaves at runtime. This issue has been patched in version 0.2.4. | |||||
| CVE-2026-33487 | 1 Goxmldsig Project | 1 Goxmldsig | 2026-09-09 | N/A | 7.5 HIGH |
| goxmlsig provides XML Digital Signatures implemented in Go. Prior to version 1.6.0, the `validateSignature` function in `validate.go` goes through the references in the `SignedInfo` block to find one that matches the signed element's ID. In Go versions before 1.22, or when `go.mod` uses an older version, there is a loop variable capture issue. The code takes the address of the loop variable `_ref` instead of its value. As a result, if more than one reference matches the ID or if the loop logic is incorrect, the `ref` pointer will always end up pointing to the last element in the `SignedInfo.References` slice after the loop. goxmlsig version 1.6.0 contains a patch. | |||||
| CVE-2025-5372 | 2 Libssh, Redhat | 3 Libssh, Enterprise Linux, Openshift Container Platform | 2026-09-01 | N/A | 5.0 MEDIUM |
| A flaw was found in libssh versions built with OpenSSL versions older than 3.0, specifically in the ssh_kdf() function responsible for key derivation. Due to inconsistent interpretation of return values where OpenSSL uses 0 to indicate failure and libssh uses 0 for success—the function may mistakenly return a success status even when key derivation fails. This results in uninitialized cryptographic key buffers being used in subsequent communication, potentially compromising SSH sessions' confidentiality, integrity, and availability. | |||||
| CVE-2026-20763 | 1 Intel | 1 Trust Domain Extensions Guest | 2026-08-18 | N/A | 4.2 MEDIUM |
| Incorrect calculation for some Intel(R) TDX Guest software before version 0.3.1 within Ring 3: User Applications may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (low) and availability (low) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. | |||||
| CVE-2024-41011 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: don't allow mapping the MMIO HDP page with large pages We don't get the right offset in that case. The GPU has an unused 4K area of the register BAR space into which you can remap registers. We remap the HDP flush registers into this space to allow userspace (CPU or GPU) to flush the HDP when it updates VRAM. However, on systems with >4K pages, we end up exposing PAGE_SIZE of MMIO space. | |||||
| CVE-2025-4435 | 2026-07-31 | N/A | 7.5 HIGH | ||
| When using a TarFile.errorlevel = 0 and extracting with a filter the documented behavior is that any filtered members would be skipped and not extracted. However the actual behavior of TarFile.errorlevel = 0 in affected versions is that the member would still be extracted and not skipped. | |||||
| CVE-2026-44074 | 2026-07-23 | N/A | 3.7 LOW | ||
| Netatalk 2.1.0 through 4.4.2 combines multiple errno values using bitwise OR, resulting in incorrect error codes when multiple error conditions occur simultaneously, which may allow a remote attacker to cause a minor service disruption via conditions that trigger incorrect error-handling paths. | |||||
| CVE-2026-7836 | 2026-07-23 | N/A | 3.1 LOW | ||
| An incorrect calculation in the hextoint macro in Netatalk 2.0.0 through 4.4.2 due to improper uppercase character handling allows a remote authenticated attacker to cause limited data modification via crafted hexadecimal input. | |||||
| CVE-2023-7346 | 2026-07-23 | N/A | 4.0 MEDIUM | ||
| Ledger Bitcoin app versions 2.1.0 and 2.1.1 contain an address derivation vulnerability that allows attackers to cause incorrect Bitcoin addresses to be displayed by exploiting improper handling of miniscript policies containing the a: fragment. Attackers can craft malicious miniscript policies that cause the device to derive and display incorrect receiving addresses, potentially leading to funds being sent to unintended addresses. | |||||
| CVE-2026-55597 | 1 Imagemagick | 1 Imagemagick | 2026-07-02 | N/A | 5.5 MEDIUM |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to version 7.1.2-26, an incorrect handling of arguments can cause a heap buffer over-write in the JP2 encoder. This issue has been fixed in version7.1.2-26. | |||||
| CVE-2026-10512 | 1 Wolfssl | 1 Wolfssl | 2026-06-26 | N/A | 7.5 HIGH |
| The X25519 x86_64 assembly implementation fails to clear the most significant bit during the final modular reduction, so the computed result may not be fully reduced modulo the field prime 2^255 - 19. This can leave the field element in a non-canonical form, producing an incorrect result from the scalar multiplication and potentially a wrong shared secret. The final carry-propagation chains in the x64 and AVX2 reduction routines could overflow into the top bit, and the high limb was not masked afterward, so the 255-bit field element was left non-canonical. | |||||
| CVE-2026-44498 | 1 Zfnd | 1 Zebrad | 2026-06-17 | N/A | 7.5 HIGH |
| ZEBRA is a Zcash node written entirely in Rust. Prior to version 4.4.0, Zebra's block validator undercounts transparent signature operations against the 20000-sigop block limit (MAX_BLOCK_SIGOPS), allowing it to accept blocks that zcashd rejects with bad-blk-sigops. A miner who produces such a block can split the network: Zebra nodes follow the offending chain while zcashd nodes do not. This issue has been patched in version 4.4.0. | |||||
| CVE-2026-28410 | 1 Thegraph | 1 Graph Protocol Contracts | 2026-06-17 | N/A | 8.1 HIGH |
| The Graph is an indexing protocol for querying networks like Ethereum, IPFS, Polygon, and other blockchains. Prior to version 3.0.0, a flaw in the token vesting contracts allows users to access tokens that should still be locked according to their vesting schedule. This issue has been patched in version 3.0.0. | |||||
| CVE-2026-25634 | 1 Color | 1 Iccdev | 2026-06-17 | N/A | 7.8 HIGH |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of ICC color management profiles. Prior to 2.3.1.4, SrcPixel and DestPixel stack buffers overlap in CIccTagMultiProcessElement::Apply() int IccTagMPE.cpp. This vulnerability is fixed in 2.3.1.4. | |||||
| CVE-2026-24783 | 1 Script3 | 1 Soroban-fixed-point-math | 2026-06-17 | N/A | 7.5 HIGH |
| soroban-fixed-point-math is a fixed-point math library for Soroban smart contacts. In versions 1.3.0 and 1.4.0, the `mulDiv(x, y, z)` function incorrectly handled cases where both the intermediate product $x * y$ and the divisor $z$ were negative. The logic assumed that if the intermediate product was negative, the final result must also be negative, neglecting the sign of $z$. This resulted in rounding being applied in the wrong direction for cases where both $x * y$ and $z$ were negative. The functions most at risk are `fixed_div_floor` and `fixed_div_ceil`, as they often use non-constant numbers as the divisor $z$ in `mulDiv`. This error is present in all signed `FixedPoint` and `SorobanFixedPoint` implementations, including `i64`, `i128`, and `I256`. Versions 1.3.1 and 1.4.1 contain a patch. No known workarounds for this issue are available. | |||||
| CVE-2026-21911 | 1 Juniper | 1 Junos Os Evolved | 2026-06-17 | N/A | 6.5 MEDIUM |
| An Incorrect Calculation vulnerability in the Layer 2 Control Protocol Daemon (l2cpd) of Juniper Networks Junos OS Evolved allows an unauthenticated network-adjacent attacker flapping the management interface to cause the learning of new MACs over label-switched interfaces (LSI) to stop while generating a flood of logs, resulting in high CPU usage. When the issue is seen, the following log message will be generated: op:1 flag:0x6 mac:xx:xx:xx:xx:xx:xx bd:2 ifl:13302 reason:0(REASON_NONE) i-op:6(INTRNL_OP_HW_FORCE_DELETE) status:10 lstatus:10 err:26(GETIFBD_VALIDATE_FAILED) err-reason 4(IFBD_VALIDATE_FAIL_EPOCH_MISMATCH) hw_wr:0x4 ctxsync:0 fwdsync:0 rtt-id:51 p_ifl:0 fwd_nh:0 svlbnh:0 event:- smask:0x100000000 dmask:0x0 mplsmask 0x1 act:0x5800 extf:0x0 pfe-id 0 hw-notif-ifl 13302 programmed-ifl 4294967295 pseudo-vtep underlay-ifl-idx 0 stack:GET_MAC, ALLOCATE_MAC, GET_IFL, GET_IFF, GET_IFBD, STOP, This issue affects Junos OS Evolved: * all versions before 21.4R3-S7-EVO, * from 22.2 before 22.2R3-S4-EVO, * from 22.3 before 22.3R3-S3-EVO, * from 22.4 before 22.4R3-S2-EVO, * from 23.2 before 23.2R2-S1-EVO, * from 23.4 before 23.4R1-S2-EVO, 23.4R2-EVO. | |||||
| CVE-2026-1229 | 1 Cloudflare | 1 Circl | 2026-06-17 | N/A | 9.8 CRITICAL |
| The CombinedMult function in the CIRCL ecc/p384 package (secp384r1 curve) produces an incorrect value for specific inputs. The issue is fixed by using complete addition formulas. ECDH and ECDSA signing relying on this curve are not affected. The bug was fixed in v1.6.3 https://github.com/cloudflare/circl/releases/tag/v1.6.3 . | |||||
| CVE-2026-0810 | 1 Gitoxidelabs | 1 Gix-date | 2026-06-17 | N/A | 7.1 HIGH |
| A flaw was found in gix-date. The `gix_date::parse::TimeBuf::as_str` function can generate strings containing invalid non-UTF8 characters. This issue violates the internal safety invariants of the `TimeBuf` component, leading to undefined behavior when these malformed strings are subsequently processed. This could potentially result in application instability or other unforeseen consequences. | |||||
| CVE-2025-59047 | 2026-06-17 | N/A | N/A | ||
| matrix-sdk-base is the base component to build a Matrix client library. In matrix-sdk-base before 0.14.1, calling the `RoomMember::normalized_power_level()` method can cause a panic if a room member has a power level of `Int::Min`. The issue is fixed in matrix-sdk-base 0.14.1. The affected method isn’t used internally, so avoiding calling `RoomMember::normalized_power_level()` prevents the panic. | |||||