Total
150 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-45807 | 1 Envoyproxy | 1 Envoy | 2026-06-17 | N/A | 7.5 HIGH |
| Envoy is a cloud-native high-performance edge/middle/service proxy. Envoy's 1.31 is using `oghttp` as the default HTTP/2 codec, and there are potential bugs around stream management in the codec. To resolve this Envoy will switch off the `oghttp2` by default. The impact of this issue is that envoy will crash. This issue has been addressed in release version 1.31.2. All users are advised to upgrade. There are no known workarounds for this issue. | |||||
| CVE-2024-45311 | 1 Quinn Project | 1 Quinn | 2026-06-17 | N/A | 7.5 HIGH |
| Quinn is a pure-Rust, async-compatible implementation of the IETF QUIC transport protocol. As of quinn-proto 0.11, it is possible for a server to `accept()`, `retry()`, `refuse()`, or `ignore()` an `Incoming` connection. However, calling `retry()` on an unvalidated connection exposes the server to a likely panic in the following situations: 1. Calling `refuse` or `ignore` on the resulting validated connection, if a duplicate initial packet is received. This issue can go undetected until a server's `refuse()`/`ignore()` code path is exercised, such as to stop a denial of service attack. 2. Accepting when the initial packet for the resulting validated connection fails to decrypt or exhausts connection IDs, if a similar initial packet that successfully decrypts and doesn't exhaust connection IDs is received. This issue can go undetected if clients are well-behaved. The former situation was observed in a real application, while the latter is only theoretical. | |||||
| CVE-2024-45304 | 1 Openzeppelin | 1 Contracts | 2026-06-17 | N/A | 5.3 MEDIUM |
| Cairo-Contracts are OpenZeppelin Contracts written in Cairo for Starknet, a decentralized ZK Rollup. This vulnerability can lead to unauthorized ownership transfer, contrary to the original owner's intention of leaving the contract without an owner. It introduces a security risk where an unintended party (pending owner) can gain control of the contract after the original owner has renounced ownership. This could also be used by a malicious owner to simulate leaving a contract without an owner, to later regain ownership by previously having proposed himself as a pending owner. This issue has been addressed in release version 0.16.0. All users are advised to upgrade. There are no known workarounds for this vulnerability. | |||||
| CVE-2024-45298 | 2026-06-17 | N/A | 4.3 MEDIUM | ||
| Wiki.js is an open source wiki app built on Node.js. A disabled user can still gain access to a wiki by abusing the password reset function. While setting up SMTP e-mail's on my server, I tested said e-mails by performing a password reset with my test user. To my shock, not only did it let me reset my password, but after resetting my password I can get into the wiki I was locked out of. The ramifications of this bug is a user can **bypass an account disabling by requesting their password be reset**. All users of wiki.js version `2.5.303` who use any account restrictions and have disabled user are affected. This issue has been addressed in version 2.5.304 and all users are advised to upgrade. There are no known workarounds for this vulnerability. | |||||
| CVE-2024-3376 | 1 Oretnom23 | 1 Computer Laboratory Management System | 2026-06-17 | 7.5 HIGH | 7.3 HIGH |
| A vulnerability classified as critical has been found in SourceCodester Computer Laboratory Management System 1.0. This affects an unknown part of the file config.php. The manipulation of the argument url leads to execution after redirect. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-259497 was assigned to this vulnerability. | |||||
| CVE-2024-38365 | 1 Btcd Project | 1 Btcd | 2026-06-17 | N/A | 7.4 HIGH |
| btcd is an alternative full node bitcoin implementation written in Go (golang). The btcd Bitcoin client (versions 0.10 to 0.24) did not correctly re-implement Bitcoin Core's "FindAndDelete()" functionality. This logic is consensus-critical: the difference in behavior with the other Bitcoin clients can lead to btcd clients accepting an invalid Bitcoin block (or rejecting a valid one). This consensus failure can be leveraged to cause a chain split (accepting an invalid Bitcoin block) or be exploited to DoS the btcd nodes (rejecting a valid Bitcoin block). An attacker can create a standard transaction where FindAndDelete doesn't return a match but removeOpCodeByData does making btcd get a different sighash, leading to a chain split. Importantly, this vulnerability can be exploited remotely by any Bitcoin user and does not require any hash power. This is because the difference in behavior can be triggered by a "standard" Bitcoin transaction, that is a transaction which gets relayed through the P2P network before it gets included in a Bitcoin block. `removeOpcodeByData(script []byte, dataToRemove []byte)` removes any data pushes from `script` that contain `dataToRemove`. However, `FindAndDelete` only removes exact matches. So for example, with `script = "<data> <data||foo>"` and `dataToRemove = "data"` btcd will remove both data pushes but Bitcoin Core's `FindAndDelete` only removes the first `<data>` push. This has been patched in btcd version v0.24.2. Users are advised to upgrade. There are no known workarounds for this issue. | |||||
| CVE-2024-37153 | 1 Evmos | 1 Evmos | 2026-06-17 | N/A | 7.5 HIGH |
| Evmos is the Ethereum Virtual Machine (EVM) Hub on the Cosmos Network. There is an issue with how to liquid stake using Safe which itself is a contract. The bug only appears when there is a local state change together with an ICS20 transfer in the same function and uses the contract's balance, that is using the contract address as the sender parameter in an ICS20 transfer using the ICS20 precompile. This is in essence the "infinite money glitch" allowing contracts to double the supply of Evmos after each transaction.The issue has been patched in versions >=V18.1.0. | |||||
| CVE-2024-35312 | 2026-06-17 | N/A | 6.2 MEDIUM | ||
| In Tor Arti before 1.2.3, STUB circuits incorrectly have a length of 2 (with lite vanguards), aka TROVE-2024-003. | |||||
| CVE-2024-35195 | 2026-06-17 | N/A | 5.6 MEDIUM | ||
| Requests is a HTTP library. Prior to 2.32.0, when making requests through a Requests `Session`, if the first request is made with `verify=False` to disable cert verification, all subsequent requests to the same host will continue to ignore cert verification regardless of changes to the value of `verify`. This behavior will continue for the lifecycle of the connection in the connection pool. This vulnerability is fixed in 2.32.0. | |||||
| CVE-2024-35190 | 1 Sangoma | 1 Asterisk | 2026-06-17 | N/A | 5.8 MEDIUM |
| Asterisk is an open source private branch exchange and telephony toolkit. After upgrade to 18.23.0, ALL unauthorized SIP requests are identified as PJSIP Endpoint of local asterisk server. This vulnerability is fixed in 18.23.1, 20.8.1, and 21.3.1. | |||||
| CVE-2024-33431 | 1 Stsaz | 1 Phiola | 2026-06-17 | N/A | 6.5 MEDIUM |
| An issue in phiola/src/afilter/conv.c:115 of phiola v2.0-rc22 allows a remote attacker to cause a denial of service via a crafted .wav file. | |||||
| CVE-2024-32971 | 2026-06-17 | N/A | 9.0 CRITICAL | ||
| Apollo Router is a configurable, graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. The affected versions of Apollo Router contain a bug that in limited circumstances, could lead to unexpected operations being executed which can result in unintended data or effects. This only affects Router instances configured to use distributed query plan caching. The root cause of this defect is a bug in Apollo Router’s cache retrieval logic: When this defect is present and distributed query planning caching is enabled, asking the Router to execute an operation (whether it is a query, a mutation, or a subscription) may result in an unexpected variation of that operation being executed or the generation of unexpected errors. The issue stems from inadvertently executing a modified version of a previously executed operation, whose query plan is stored in the underlying cache (specifically, Redis). Depending on the type of the operation, the result may vary. For a query, results may be fetched that don’t match what was requested (e.g., rather than running `fetchUsers(type: ENTERPRISE)` the Router may run `fetchUsers(type: TRIAL)`. For a mutation, this may result in incorrect mutations being sent to underlying subgraph servers (e.g., rather than sending `deleteUser(id: 10)` to a subgraph, the Router may run `deleteUser(id: 12)`. Users who are using distributed query plan caching, are advised to either upgrade to version 1.45.1 or above or downgrade to version 1.43.2 of the Apollo Router. Apollo Router versions 1.44.0 or 1.45.0 are not recommended for use and have been withdrawn. Users unable to upgrade can disable distributed query plan caching to mitigate this issue. | |||||
| CVE-2024-32896 | 1 Google | 1 Android | 2026-06-17 | N/A | 7.8 HIGH |
| there is a possible way to bypass due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is needed for exploitation. | |||||
| CVE-2024-30246 | 1 Enalean | 1 Tuleap | 2026-06-17 | N/A | 7.6 HIGH |
| Tuleap is an Open Source Suite to improve management of software developments and collaboration. A malicious user could exploit this issue on purpose to delete information on the instance or possibly gain access to restricted artifacts. It is however not possible to control exactly which information is deleted. Information from theDate, File, Float, Int, List, OpenList, Text, and Permissions on artifact (this one can lead to the disclosure of restricted information) fields can be impacted. This vulnerability is fixed in Tuleap Community Edition version 15.7.99.6 and Tuleap Enterprise Edition 15.7-2, 15.6-5, 15.5-6, 15.4-8, 15.3-6, 15.2-5, 15.1-9, 15.0-9, and 14.12-6. | |||||
| CVE-2024-30133 | 1 Hcltech | 1 Traveler For Microsoft Outlook | 2026-06-17 | N/A | 5.3 MEDIUM |
| HCL Traveler for Microsoft Outlook (HTMO) is susceptible to a control flow vulnerability. The application does not sufficiently manage its control flow during execution, creating conditions in which the control flow can be modified in unexpected ways. | |||||
| CVE-2024-25622 | 1 Dena | 1 H2o | 2026-06-17 | N/A | 3.1 LOW |
| h2o is an HTTP server with support for HTTP/1.x, HTTP/2 and HTTP/3. The configuration directives provided by the headers handler allows users to modify the response headers being sent by h2o. The configuration file of h2o has scopes, and the inner scopes (e.g., path level) are expected to inherit the configuration defined in outer scopes (e.g., global level). However, if a header directive is used in the inner scope, all the definition in outer scopes are ignored. This can lead to headers not being modified as expected. Depending on the headers being added or removed unexpectedly, this behavior could lead to unexpected client behavior. This vulnerability is fixed in commit 123f5e2b65dcdba8f7ef659a00d24bd1249141be. | |||||
| CVE-2024-20480 | 1 Cisco | 1 Ios Xe | 2026-06-17 | N/A | 8.6 HIGH |
| A vulnerability in the DHCP Snooping feature of Cisco IOS XE Software on Software-Defined Access (SD-Access) fabric edge nodes could allow an unauthenticated, remote attacker to cause high CPU utilization on an affected device, resulting in a denial of service (DoS) condition that requires a manual reload to recover. This vulnerability is due to improper handling of IPv4 DHCP packets. An attacker could exploit this vulnerability by sending certain IPv4 DHCP packets to an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition that requires a manual reload to recover. | |||||
| CVE-2024-0313 | 2026-06-17 | N/A | 5.5 MEDIUM | ||
| A malicious insider exploiting this vulnerability can circumvent existing security controls put in place by the organization. On the contrary, if the victim is legitimately using the temporary bypass to reach out to the Internet for retrieving application and system updates, a remote device could target it and undo the bypass, thereby denying the victim access to the update service, causing it to fail. | |||||
| CVE-2023-52781 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: config: fix iteration issue in 'usb_get_bos_descriptor()' The BOS descriptor defines a root descriptor and is the base descriptor for accessing a family of related descriptors. Function 'usb_get_bos_descriptor()' encounters an iteration issue when skipping the 'USB_DT_DEVICE_CAPABILITY' descriptor type. This results in the same descriptor being read repeatedly. To address this issue, a 'goto' statement is introduced to ensure that the pointer and the amount read is updated correctly. This ensures that the function iterates to the next descriptor instead of reading the same descriptor repeatedly. | |||||
| CVE-2023-52742 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: USB: Fix wrong-direction WARNING in plusb.c The syzbot fuzzer detected a bug in the plusb network driver: A zero-length control-OUT transfer was treated as a read instead of a write. In modern kernels this error provokes a WARNING: usb 1-1: BOGUS control dir, pipe 80000280 doesn't match bRequestType c0 WARNING: CPU: 0 PID: 4645 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 Modules linked in: CPU: 1 PID: 4645 Comm: dhcpcd Not tainted 6.2.0-rc6-syzkaller-00050-g9f266ccaa2f5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 ... Call Trace: <TASK> usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153 __usbnet_read_cmd+0xb9/0x390 drivers/net/usb/usbnet.c:2010 usbnet_read_cmd+0x96/0xf0 drivers/net/usb/usbnet.c:2068 pl_vendor_req drivers/net/usb/plusb.c:60 [inline] pl_set_QuickLink_features drivers/net/usb/plusb.c:75 [inline] pl_reset+0x2f/0xf0 drivers/net/usb/plusb.c:85 usbnet_open+0xcc/0x5d0 drivers/net/usb/usbnet.c:889 __dev_open+0x297/0x4d0 net/core/dev.c:1417 __dev_change_flags+0x587/0x750 net/core/dev.c:8530 dev_change_flags+0x97/0x170 net/core/dev.c:8602 devinet_ioctl+0x15a2/0x1d70 net/ipv4/devinet.c:1147 inet_ioctl+0x33f/0x380 net/ipv4/af_inet.c:979 sock_do_ioctl+0xcc/0x230 net/socket.c:1169 sock_ioctl+0x1f8/0x680 net/socket.c:1286 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The fix is to call usbnet_write_cmd() instead of usbnet_read_cmd() and remove the USB_DIR_IN flag. | |||||