Total
163 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-47745 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mm: call the security_mmap_file() LSM hook in remap_file_pages() The remap_file_pages syscall handler calls do_mmap() directly, which doesn't contain the LSM security check. And if the process has called personality(READ_IMPLIES_EXEC) before and remap_file_pages() is called for RW pages, this will actually result in remapping the pages to RWX, bypassing a W^X policy enforced by SELinux. So we should check prot by security_mmap_file LSM hook in the remap_file_pages syscall handler before do_mmap() is called. Otherwise, it potentially permits an attacker to bypass a W^X policy enforced by SELinux. The bypass is similar to CVE-2016-10044, which bypass the same thing via AIO and can be found in [1]. The PoC: $ cat > test.c int main(void) { size_t pagesz = sysconf(_SC_PAGE_SIZE); int mfd = syscall(SYS_memfd_create, "test", 0); const char *buf = mmap(NULL, 4 * pagesz, PROT_READ | PROT_WRITE, MAP_SHARED, mfd, 0); unsigned int old = syscall(SYS_personality, 0xffffffff); syscall(SYS_personality, READ_IMPLIES_EXEC | old); syscall(SYS_remap_file_pages, buf, pagesz, 0, 2, 0); syscall(SYS_personality, old); // show the RWX page exists even if W^X policy is enforced int fd = open("/proc/self/maps", O_RDONLY); unsigned char buf2[1024]; while (1) { int ret = read(fd, buf2, 1024); if (ret <= 0) break; write(1, buf2, ret); } close(fd); } $ gcc test.c -o test $ ./test | grep rwx 7f1836c34000-7f1836c35000 rwxs 00002000 00:01 2050 /memfd:test (deleted) [PM: subject line tweaks] | |||||
| CVE-2022-49393 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix list iterator in fastrpc_req_mem_unmap_impl This is another instance of incorrect use of list iterator and checking it for NULL. The list iterator value 'map' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty (in this case, the check 'if (!map) {' will always be false and never exit as expected). To fix the bug, use a new variable 'iter' as the list iterator, while use the original variable 'map' as a dedicated pointer to point to the found element. Without this patch, Kernel crashes with below trace: Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000ffff7fb03750 ... Call trace: fastrpc_map_create+0x70/0x290 [fastrpc] fastrpc_req_mem_map+0xf0/0x2dc [fastrpc] fastrpc_device_ioctl+0x138/0xc60 [fastrpc] __arm64_sys_ioctl+0xa8/0xec invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0xd4/0xfc do_el0_svc+0x28/0x90 el0_svc+0x3c/0x130 el0t_64_sync_handler+0xa4/0x130 el0t_64_sync+0x18c/0x190 Code: 14000016 f94000a5 eb05029f 54000260 (b94018a6) ---[ end trace 0000000000000000 ]--- | |||||
| CVE-2026-35414 | 1 Openbsd | 1 Openssh | 2026-07-24 | N/A | 4.2 MEDIUM |
| OpenSSH before 10.3 mishandles the authorized_keys principals option in uncommon scenarios involving a principals list in conjunction with a Certificate Authority that makes certain use of comma characters. | |||||
| CVE-2025-58136 | 1 Apache | 1 Traffic Server | 2026-07-24 | N/A | 7.5 HIGH |
| A bug in POST request handling causes a crash under a certain condition. This issue affects Apache Traffic Server: from 10.0.0 through 10.1.1, from 9.0.0 through 9.2.12. Users are recommended to upgrade to version 10.1.2 or 9.2.13, which fix the issue. A workaround for older versions is to set proxy.config.http.request_buffer_enabled to 0 (the default value is 0). | |||||
| CVE-2026-35387 | 1 Openbsd | 1 Openssh | 2026-07-24 | N/A | 3.1 LOW |
| OpenSSH before 10.3 can use unintended ECDSA algorithms. Listing of any ECDSA algorithm in PubkeyAcceptedAlgorithms or HostbasedAcceptedAlgorithms is misinterpreted to mean all ECDSA algorithms. | |||||
| CVE-2026-48844 | 2026-07-24 | N/A | 7.5 HIGH | ||
| Roundcube Webmail 1.6.x before 1.6.16 and 1.7.x before 1.7.1 has insecure code evaluation logic in LDAP the autovalues option that could lead to code injection. (Support for code evaluation has been removed in 1.6.16 and 1.7.1.) | |||||
| CVE-2026-20171 | 2026-07-23 | N/A | 6.8 MEDIUM | ||
| A vulnerability in the Border Gateway Protocol (BGP) enforce-first-as feature of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an unauthenticated, remote attacker to trigger BGP peer flaps, resulting in a denial of service (DoS) condition. This vulnerability is due to incorrect parsing of a transitive BGP attribute. An attacker could exploit this vulnerability by sending a crafted BGP update through an established BGP peer session. If the update propagates to an affected device, it could cause the device to drop the BGP session and flap with the BGP peer that is forwarding this update, resulting in a DoS condition. | |||||
| CVE-2026-14935 | 2026-07-08 | N/A | 3.7 LOW | ||
| A logic vulnerability was found in GStreamer's webrtcbin component. The _check_sdp_crypto() function contains an inverted boolean condition that causes it to accept remote SDP offers or answers that lack the required a=fingerprint attribute, while incorrectly rejecting those that include it. An attacker with the ability to intercept and modify WebRTC signaling messages could exploit this to bypass the SDP-level DTLS certificate fingerprint binding, weakening defenses against man-in-the-middle attacks on media streams. | |||||
| CVE-2026-56328 | 2026-07-01 | N/A | 6.5 MEDIUM | ||
| Capgo before 12.128.2 allows multiple public channels for the same app and platform to coexist simultaneously, while unnamed /updates requests without defaultChannel implicitly resolve to a single hidden winner channel. An authorized app or channel manager can create ambiguous default update state and silently influence which bundle unnamed clients receive, breaking release routing integrity and predictability. | |||||
| CVE-2026-44928 | 1 Uriparser Project | 1 Uriparser | 2026-06-17 | N/A | 2.9 LOW |
| In uriparser before 1.0.2, the function family EqualsUri can misclassify two unequal URIs as equal. | |||||
| CVE-2026-40960 | 2026-06-17 | N/A | 8.1 HIGH | ||
| Luanti 5 before 5.15.2 sometimes allows unintended access to an insecure environment. If at least one mod is listed as secure.trusted_mods or secure.http_mods, then a crafted mod can intercept the request for the insecure environment or HTTP API, and also receive access to it. | |||||
| CVE-2026-40719 | 2026-06-17 | N/A | 7.5 HIGH | ||
| Deadwood in MaraDNS 3.5.0036 allows attackers to exhaust connection slots via a zone whose authoritative nameserver address cannot be resolved. | |||||
| CVE-2026-40200 | 2026-06-17 | N/A | 8.1 HIGH | ||
| An issue was discovered in musl libc 0.7.10 through 1.2.6. Stack-based memory corruption can occur during qsort of very large arrays, due to incorrectly implemented double-word primitives. The number of elements must exceed about seven million, i.e., the 32nd Leonardo number on 32-bit platforms (or the 64th Leonardo number on 64-bit platforms, which is not practical). | |||||
| CVE-2026-38361 | 1 Fohrloop | 1 Dash-uploader | 2026-06-17 | N/A | 7.5 HIGH |
| Multiple unauthenticated denial-of-service (DoS) issues in fohrloop dash-uploader v0.1.0 through v0.7.0a2. The chunked-upload handler (dash_uploader/httprequesthandler.py, dash_uploader/upload.py) trusts unsanitized, attacker-controlled upload parameters (e.g. flowTotalChunks) and does not enforce the documented max_file_size limit, allowing a remote, unauthenticated attacker to cause an out-of-memory (OOM) process crash (unbounded range(1, flowTotalChunks + 1) allocation), truncation of the target file to zero bytes (flowTotalChunks=0, where the all([]) == True quirk runs the file-assembly branch on zero chunks), permanent disk exhaustion (never-cleaned-up temporary directories per flowIdentifier), and a complete bypass of the documented max_file_size limit. | |||||
| CVE-2026-33011 | 1 Nestjs | 1 Nest | 2026-06-17 | N/A | 7.5 HIGH |
| Nest is a framework for building scalable Node.js server-side applications. In versions 11.1.15 and below, a NestJS application using @nestjs/platform-fastify GET middleware can be bypassed because Fastify automatically redirects HEAD requests to the corresponding GET handlers (if they exist). As a result: middleware will be completely skipped, the HTTP response won't include a body (since the response is truncated when redirecting a HEAD request to a GET handler), and the actual handler will still be executed. This issue is fixed in version 11.1.16. | |||||
| CVE-2026-32713 | 1 Dronecode | 1 Px4 Drone Autopilot | 2026-06-17 | N/A | 4.3 MEDIUM |
| PX4 autopilot is a flight control solution for drones. Prior to 1.17.0-rc2, A logic error in the PX4 Autopilot MAVLink FTP session validation uses incorrect boolean logic (&& instead of ||), allowing BurstReadFile and WriteFile operations to proceed with invalid sessions or closed file descriptors. This enables an unauthenticated attacker to put the FTP subsystem into an inconsistent state, trigger operations on invalid file descriptors, and bypass session isolation checks. This vulnerability is fixed in 1.17.0-rc2. | |||||
| CVE-2026-26267 | 1 Stellar | 1 Rs-soroban-sdk | 2026-06-17 | N/A | 7.5 HIGH |
| soroban-sdk is a Rust SDK for Soroban contracts. Prior to versions 22.0.10, 23.5.2, and 25.1.1, the `#[contractimpl]` macro contains a bug in how it wires up function calls. `#[contractimpl]` generates code that uses `MyContract::value()` style calls even when it's processing the trait version. This means if an inherent function is also defined with the same name, the inherent function gets called instead of the trait function. This means the Wasm-exported entry point silently calls the wrong function when two conditions are met simultaneously: First, an `impl Trait for MyContract` block is defined with one or more functions, with `#[contractimpl]` applied. Second, an `impl MyContract` block is defined with one or more identically named functions, without `#[contractimpl]` applied. If the trait version contains important security checks, such as verifying the caller is authorized, that the inherent version does not, those checks are bypassed. Anyone interacting with the contract through its public interface will call the wrong function. The problem is patched in `soroban-sdk-macros` versions 22.0.10, 23.5.2, and 25.1.1. The fix changes the generated call from `<Type>::func()` to `<Type as Trait>::func()` when processing trait implementations, ensuring Rust resolves to the trait associated function regardless of whether an inherent function with the same name exists. Users should upgrade to `soroban-sdk-macros` 22.0.10, 23.5.2, or 25.1.1 and recompile their contracts. If upgrading is not immediately possible, contract developers can avoid the issue by ensuring that no inherent associated function on the contract type shares a name with any function in the trait implementation. Renaming or removing the conflicting inherent function eliminates the ambiguity and causes the macro-generated code to correctly resolve to the trait function. | |||||
| CVE-2026-1874 | 1 Mitsubishielectric | 4 Melsec Iq-f Fx5-eip, Melsec Iq-f Fx5-eip Firmware, Melsec Iq-f Fx5-enet\/ip and 1 more | 2026-06-17 | N/A | 7.5 HIGH |
| Always-Incorrect Control Flow Implementation vulnerability in Mitsubishi Electric Corporation MELSEC iQ-F Series FX5-ENET/IP Ethernet Module FX5-ENET/IP versions 1.106 and prior and Mitsubishi Electric Corporation MELSEC iQ-F Series FX5-EIP EtherNet/IP Module FX5-EIP versions 1.000 and prior allows a remote attacker to cause a denial-of-service (DoS) condition on the products by continuously sending UDP packets to the products. A system reset of the product is required for recovery. | |||||
| CVE-2025-49091 | 2026-06-17 | N/A | 8.2 HIGH | ||
| KDE Konsole before 25.04.2 allows remote code execution in a certain scenario. It supports loading URLs from the scheme handlers such as a ssh:// or telnet:// or rlogin:// URL. This can be executed regardless of whether the ssh, telnet, or rlogin binary is available. In this mode, there is a code path where if that binary is not available, Konsole falls back to using /bin/bash for the given arguments (i.e., the URL) provided. This allows an attacker to execute arbitrary code. | |||||
| CVE-2025-33199 | 1 Nvidia | 2 Dgx Os, Dgx Spark | 2026-06-17 | N/A | 3.2 LOW |
| NVIDIA DGX Spark GB10 contains a vulnerability in SROOT firmware, where an attacker could cause incorrect control flow behavior. A successful exploit of this vulnerability might lead to data tampering. | |||||