Total
3831 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-52933 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/poll: fix signed comparison in io_poll_get_ownership() io_poll_get_ownership() uses a signed comparison to check whether poll_refs has reached the threshold for the slowpath: if (unlikely(atomic_read(&req->poll_refs) >= IO_POLL_REF_BIAS)) atomic_read() returns int (signed). When IO_POLL_CANCEL_FLAG (BIT(31)) is set in poll_refs, the value becomes negative in signed arithmetic, so the >= 128 comparison always evaluates to false and the slowpath is never taken. Fix this by casting the atomic_read() result to unsigned int before the comparison, so that the cancel flag is treated as a large positive value and correctly triggers the slowpath. | |||||
| CVE-2026-52914 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: fix fragment reassembly length accounting batman-adv keeps a running payload length for queued fragments and uses it to validate a fragment chain before reassembly. That accounting currently allows the accumulated fragment length to be truncated during updates. As a result, malformed fragment chains can bypass the intended validation and drive reassembly with inconsistent length state, leading to a local denial of service. Fix the accounting by storing the accumulated length in a length-typed field and rejecting update overflows before the existing validation logic runs. The fix was verified against the original reproducer and against valid fragment reassembly paths. | |||||
| CVE-2026-46209 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/gem: Fix inconsistent plane dimension calculation in drm_gem_fb_init_with_funcs() drm_gem_fb_init_with_funcs() computes sub-sampled plane dimensions using plain integer division: unsigned int width = mode_cmd->width / (i ? info->hsub : 1); unsigned int height = mode_cmd->height / (i ? info->vsub : 1); However, the ioctl-level framebuffer_check() in drm_framebuffer.c uses drm_format_info_plane_width/height() which round up dimensions via DIV_ROUND_UP(). This inconsistency corrupts the subsequent GEM object size check for certain pixel format and dimension combinations. For example, with NV12 (vsub=2) and a 1-pixel-tall framebuffer the GEM size validation path sees height=0 instead of height=1. The expression (height - 1) then wraps to UINT_MAX as an unsigned int, causing min_size to overflow and wrap back to a small value. A tiny GEM object therefore passes the size guard, yet when the GPU accesses the chroma plane it will read or write memory beyond the object's bounds. Fix by replacing the open-coded divisions with drm_format_info_plane_width() and drm_format_info_plane_height(), which use DIV_ROUND_UP() and match the calculation already used in framebuffer_check(). | |||||
| CVE-2026-46195 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: validate dacloffset before building DACL pointers parse_sec_desc(), build_sec_desc(), and the chown path in id_mode_to_cifs_acl() all add the server-supplied dacloffset to pntsd before proving a DACL header fits inside the returned security descriptor. On 32-bit builds a malicious server can return dacloffset near U32_MAX, wrap the derived DACL pointer below end_of_acl, and then slip past the later pointer-based bounds checks. build_sec_desc() and id_mode_to_cifs_acl() can then dereference DACL fields from the wrapped pointer in the chmod/chown rewrite paths. Validate dacloffset numerically before building any DACL pointer and reuse the same helper at the three DACL entry points. | |||||
| CVE-2026-46043 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.1 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv rxe_rcv() currently checks only that the incoming packet is at least header_size(pkt) bytes long before payload_size() is used. However, payload_size() subtracts both the attacker-controlled BTH pad field and RXE_ICRC_SIZE from pkt->paylen: payload_size = pkt->paylen - offset[RXE_PAYLOAD] - bth_pad(pkt) - RXE_ICRC_SIZE This means a short packet can still make payload_size() underflow even if it includes enough bytes for the fixed headers. Simply requiring header_size(pkt) + RXE_ICRC_SIZE is not sufficient either, because a packet with a forged non-zero BTH pad can still leave payload_size() negative and pass an underflowed value to later receive-path users. Fix this by validating pkt->paylen against the full minimum length required by payload_size(): header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE. | |||||
| CVE-2026-43407 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.1 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply() This patch fixes an out-of-bounds access in ceph_handle_auth_reply() that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. In ceph_handle_auth_reply(), the value of the payload_len field of such a message is stored in a variable of type int. A value greater than INT_MAX leads to an integer overflow and is interpreted as a negative value. This leads to decrementing the pointer address by this value and subsequently accessing it because ceph_decode_need() only checks that the memory access does not exceed the end address of the allocation. This patch fixes the issue by changing the data type of payload_len to u32. Additionally, the data type of result_msg_len is changed to u32, as it is also a variable holding a non-negative length. Also, an additional layer of sanity checks is introduced, ensuring that directly after reading it from the message, payload_len and result_msg_len are not greater than the overall segment length. BUG: KASAN: slab-out-of-bounds in ceph_handle_auth_reply+0x642/0x7a0 [libceph] Read of size 4 at addr ffff88811404df14 by task kworker/20:1/262 CPU: 20 UID: 0 PID: 262 Comm: kworker/20:1 Not tainted 6.19.2 #5 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: ceph-msgr ceph_con_workfn [libceph] Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 print_report+0xd1/0x620 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? kasan_complete_mode_report_info+0x72/0x210 kasan_report+0xe7/0x130 ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] __asan_report_load_n_noabort+0xf/0x20 ceph_handle_auth_reply+0x642/0x7a0 [libceph] mon_dispatch+0x973/0x23d0 [libceph] ? apparmor_socket_recvmsg+0x6b/0xa0 ? __pfx_mon_dispatch+0x10/0x10 [libceph] ? __kasan_check_write+0x14/0x30i ? mutex_unlock+0x7f/0xd0 ? __pfx_mutex_unlock+0x10/0x10 ? __pfx_do_recvmsg+0x10/0x10 [libceph] ceph_con_process_message+0x1f1/0x650 [libceph] process_message+0x1e/0x450 [libceph] ceph_con_v2_try_read+0x2e48/0x6c80 [libceph] ? __pfx_ceph_con_v2_try_read+0x10/0x10 [libceph] ? save_fpregs_to_fpstate+0xb0/0x230 ? raw_spin_rq_unlock+0x17/0xa0 ? finish_task_switch.isra.0+0x13b/0x760 ? __switch_to+0x385/0xda0 ? __kasan_check_write+0x14/0x30 ? mutex_lock+0x8d/0xe0 ? __pfx_mutex_lock+0x10/0x10 ceph_con_workfn+0x248/0x10c0 [libceph] process_one_work+0x629/0xf80 ? __kasan_check_write+0x14/0x30 worker_thread+0x87f/0x1570 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __pfx_try_to_wake_up+0x10/0x10 ? kasan_print_address_stack_frame+0x1f7/0x280 ? __pfx_worker_thread+0x10/0x10 kthread+0x396/0x830 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? __pfx_kthread+0x10/0x10 ? __kasan_check_write+0x14/0x30 ? recalc_sigpending+0x180/0x210 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3f7/0x610 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x385/0xda0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> [ idryomov: replace if statements with ceph_decode_need() for payload_len and result_msg_len ] | |||||
| CVE-2026-43405 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Use u32 for non-negative values in ceph_monmap_decode() This patch fixes unnecessary implicit conversions that change signedness of blob_len and num_mon in ceph_monmap_decode(). Currently blob_len and num_mon are (signed) int variables. They are used to hold values that are always non-negative and get assigned in ceph_decode_32_safe(), which is meant to assign u32 values. Both variables are subsequently used as unsigned values, and the value of num_mon is further assigned to monmap->num_mon, which is of type u32. Therefore, both variables should be of type u32. This is especially relevant for num_mon. If the value read from the incoming message is very large, it is interpreted as a negative value, and the check for num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to allocate a very large chunk of memory for monmap, which will most likely fail. In this case, an unnecessary attempt to allocate memory is performed, and -ENOMEM is returned instead of -EINVAL. | |||||
| CVE-2026-43368 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix potential overflow of shmem scatterlist length When a scatterlists table of a GEM shmem object of size 4 GB or more is populated with pages allocated from a folio, unsigned int .length attribute of a scatterlist may get overflowed if total byte length of pages allocated to that single scatterlist happens to reach or cross the 4GB limit. As a consequence, users of the object may suffer from hitting unexpected, premature end of the object's backing pages. [278.780187] ------------[ cut here ]------------ [278.780377] WARNING: CPU: 1 PID: 2326 at drivers/gpu/drm/i915/i915_mm.c:55 remap_sg+0x199/0x1d0 [i915] ... [278.780654] CPU: 1 UID: 0 PID: 2326 Comm: gem_mmap_offset Tainted: G S U 6.17.0-rc1-CI_DRM_16981-ged823aaa0607+ #1 PREEMPT(voluntary) [278.780656] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER [278.780658] Hardware name: Intel Corporation Meteor Lake Client Platform/MTL-P LP5x T3 RVP, BIOS MTLPFWI1.R00.3471.D91.2401310918 01/31/2024 [278.780659] RIP: 0010:remap_sg+0x199/0x1d0 [i915] ... [278.780786] Call Trace: [278.780787] <TASK> [278.780788] ? __apply_to_page_range+0x3e6/0x910 [278.780795] ? __pfx_remap_sg+0x10/0x10 [i915] [278.780906] apply_to_page_range+0x14/0x30 [278.780908] remap_io_sg+0x14d/0x260 [i915] [278.781013] vm_fault_cpu+0xd2/0x330 [i915] [278.781137] __do_fault+0x3a/0x1b0 [278.781140] do_fault+0x322/0x640 [278.781143] __handle_mm_fault+0x938/0xfd0 [278.781150] handle_mm_fault+0x12c/0x300 [278.781152] ? lock_mm_and_find_vma+0x4b/0x760 [278.781155] do_user_addr_fault+0x2d6/0x8e0 [278.781160] exc_page_fault+0x96/0x2c0 [278.781165] asm_exc_page_fault+0x27/0x30 ... That issue was apprehended by the author of a change that introduced it, and potential risk even annotated with a comment, but then never addressed. When adding folio pages to a scatterlist table, take care of byte length of any single scatterlist not exceeding max_segment. (cherry picked from commit 06249b4e691a75694c014a61708c007fb5755f60) | |||||
| CVE-2026-43341 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: net/ipv6: ioam6: prevent schema length wraparound in trace fill ioam6_fill_trace_data() stores the schema contribution to the trace length in a u8. With bit 22 enabled and the largest schema payload, sclen becomes 1 + 1020 / 4, wraps from 256 to 0, and bypasses the remaining-space check. __ioam6_fill_trace_data() then positions the write cursor without reserving the schema area but still copies the 4-byte schema header and the full schema payload, overrunning the trace buffer. Keep sclen in an unsigned int so the remaining-space check and the write cursor calculation both see the full schema length. | |||||
| CVE-2026-43187 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: xfs: delete attr leaf freemap entries when empty Back in commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow"), Brian Foster observed that it's possible for a small freemap at the end of the end of the xattr entries array to experience a size underflow when subtracting the space consumed by an expansion of the entries array. There are only three freemap entries, which means that it is not a complete index of all free space in the leaf block. This code can leave behind a zero-length freemap entry with a nonzero base. Subsequent setxattr operations can increase the base up to the point that it overlaps with another freemap entry. This isn't in and of itself a problem because the code in _leaf_add that finds free space ignores any freemap entry with zero size. However, there's another bug in the freemap update code in _leaf_add, which is that it fails to update a freemap entry that begins midway through the xattr entry that was just appended to the array. That can result in the freemap containing two entries with the same base but different sizes (0 for the "pushed-up" entry, nonzero for the entry that's actually tracking free space). A subsequent _leaf_add can then allocate xattr namevalue entries on top of the entries array, leading to data loss. But fixing that is for later. For now, eliminate the possibility of confusion by zeroing out the base of any freemap entry that has zero size. Because the freemap is not intended to be a complete index of free space, a subsequent failure to find any free space for a new xattr will trigger block compaction, which regenerates the freemap. It looks like this bug has been in the codebase for quite a long time. | |||||
| CVE-2026-31774 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/net: fix slab-out-of-bounds read in io_bundle_nbufs() sqe->len is __u32 but gets stored into sr->len which is int. When userspace passes sqe->len values exceeding INT_MAX (e.g. 0xFFFFFFFF), sr->len overflows to a negative value. This negative value propagates through the bundle recv/send path: 1. io_recv(): sel.val = sr->len (ssize_t gets -1) 2. io_recv_buf_select(): arg.max_len = sel->val (size_t gets 0xFFFFFFFFFFFFFFFF) 3. io_ring_buffers_peek(): buf->len is not clamped because max_len is astronomically large 4. iov[].iov_len = 0xFFFFFFFF flows into io_bundle_nbufs() 5. io_bundle_nbufs(): min_t(int, 0xFFFFFFFF, ret) yields -1, causing ret to increase instead of decrease, creating an infinite loop that reads past the allocated iov[] array This results in a slab-out-of-bounds read in io_bundle_nbufs() from the kmalloc-64 slab, as nbufs increments past the allocated iovec entries. BUG: KASAN: slab-out-of-bounds in io_bundle_nbufs+0x128/0x160 Read of size 8 at addr ffff888100ae05c8 by task exp/145 Call Trace: io_bundle_nbufs+0x128/0x160 io_recv_finish+0x117/0xe20 io_recv+0x2db/0x1160 Fix this by rejecting negative sr->len values early in both io_sendmsg_prep() and io_recvmsg_prep(). Since sqe->len is __u32, any value > INT_MAX indicates overflow and is not a valid length. | |||||
| CVE-2026-31662 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix bc_ackers underflow on duplicate GRP_ACK_MSG The GRP_ACK_MSG handler in tipc_group_proto_rcv() currently decrements bc_ackers on every inbound group ACK, even when the same member has already acknowledged the current broadcast round. Because bc_ackers is a u16, a duplicate ACK received after the last legitimate ACK wraps the counter to 65535. Once wrapped, tipc_group_bc_cong() keeps reporting congestion and later group broadcasts on the affected socket stay blocked until the group is recreated. Fix this by ignoring duplicate or stale ACKs before touching bc_acked or bc_ackers. This makes repeated GRP_ACK_MSG handling idempotent and prevents the underflow path. | |||||
| CVE-2026-31659 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: reject oversized global TT response buffers batadv_tt_prepare_tvlv_global_data() builds the allocation length for a global TT response in 16-bit temporaries. When a remote originator advertises a large enough global TT, the TT payload length plus the VLAN header offset can exceed 65535 and wrap before kmalloc(). The full-table response path still uses the original TT payload length when it fills tt_change, so the wrapped allocation is too small and batadv_tt_prepare_tvlv_global_data() writes past the end of the heap object before the later packet-size check runs. Fix this by rejecting TT responses whose TVLV value length cannot fit in the 16-bit TVLV payload length field. | |||||
| CVE-2026-31649 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix integer underflow in chain mode The jumbo_frm() chain-mode implementation unconditionally computes len = nopaged_len - bmax; where nopaged_len = skb_headlen(skb) (linear bytes only) and bmax is BUF_SIZE_8KiB or BUF_SIZE_2KiB. However, the caller stmmac_xmit() decides to invoke jumbo_frm() based on skb->len (total length including page fragments): is_jumbo = stmmac_is_jumbo_frm(priv, skb->len, enh_desc); When a packet has a small linear portion (nopaged_len <= bmax) but a large total length due to page fragments (skb->len > bmax), the subtraction wraps as an unsigned integer, producing a huge len value (~0xFFFFxxxx). This causes the while (len != 0) loop to execute hundreds of thousands of iterations, passing skb->data + bmax * i pointers far beyond the skb buffer to dma_map_single(). On IOMMU-less SoCs (the typical deployment for stmmac), this maps arbitrary kernel memory to the DMA engine, constituting a kernel memory disclosure and potential memory corruption from hardware. Fix this by introducing a buf_len local variable clamped to min(nopaged_len, bmax). Computing len = nopaged_len - buf_len is then always safe: it is zero when the linear portion fits within a single descriptor, causing the while (len != 0) loop to be skipped naturally, and the fragment loop in stmmac_xmit() handles page fragments afterward. | |||||
| CVE-2026-31648 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mm: filemap: fix nr_pages calculation overflow in filemap_map_pages() When running stress-ng on my Arm64 machine with v7.0-rc3 kernel, I encountered some very strange crash issues showing up as "Bad page state": " [ 734.496287] BUG: Bad page state in process stress-ng-env pfn:415735fb [ 734.496427] page: refcount:0 mapcount:1 mapping:0000000000000000 index:0x4cf316 pfn:0x415735fb [ 734.496434] flags: 0x57fffe000000800(owner_2|node=1|zone=2|lastcpupid=0x3ffff) [ 734.496439] raw: 057fffe000000800 0000000000000000 dead000000000122 0000000000000000 [ 734.496440] raw: 00000000004cf316 0000000000000000 0000000000000000 0000000000000000 [ 734.496442] page dumped because: nonzero mapcount " After analyzing this page’s state, it is hard to understand why the mapcount is not 0 while the refcount is 0, since this page is not where the issue first occurred. By enabling the CONFIG_DEBUG_VM config, I can reproduce the crash as well and captured the first warning where the issue appears: " [ 734.469226] page: refcount:33 mapcount:0 mapping:00000000bef2d187 index:0x81a0 pfn:0x415735c0 [ 734.469304] head: order:5 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 734.469315] memcg:ffff000807a8ec00 [ 734.469320] aops:ext4_da_aops ino:100b6f dentry name(?):"stress-ng-mmaptorture-9397-0-2736200540" [ 734.469335] flags: 0x57fffe400000069(locked|uptodate|lru|head|node=1|zone=2|lastcpupid=0x3ffff) ...... [ 734.469364] page dumped because: VM_WARN_ON_FOLIO((_Generic((page + nr_pages - 1), const struct page *: (const struct folio *)_compound_head(page + nr_pages - 1), struct page *: (struct folio *)_compound_head(page + nr_pages - 1))) != folio) [ 734.469390] ------------[ cut here ]------------ [ 734.469393] WARNING: ./include/linux/rmap.h:351 at folio_add_file_rmap_ptes+0x3b8/0x468, CPU#90: stress-ng-mlock/9430 [ 734.469551] folio_add_file_rmap_ptes+0x3b8/0x468 (P) [ 734.469555] set_pte_range+0xd8/0x2f8 [ 734.469566] filemap_map_folio_range+0x190/0x400 [ 734.469579] filemap_map_pages+0x348/0x638 [ 734.469583] do_fault_around+0x140/0x198 ...... [ 734.469640] el0t_64_sync+0x184/0x188 " The code that triggers the warning is: "VM_WARN_ON_FOLIO(page_folio(page + nr_pages - 1) != folio, folio)", which indicates that set_pte_range() tried to map beyond the large folio’s size. By adding more debug information, I found that 'nr_pages' had overflowed in filemap_map_pages(), causing set_pte_range() to establish mappings for a range exceeding the folio size, potentially corrupting fields of pages that do not belong to this folio (e.g., page->_mapcount). After above analysis, I think the possible race is as follows: CPU 0 CPU 1 filemap_map_pages() ext4_setattr() //get and lock folio with old inode->i_size next_uptodate_folio() ....... //shrink the inode->i_size i_size_write(inode, attr->ia_size); //calculate the end_pgoff with the new inode->i_size file_end = DIV_ROUND_UP(i_size_read(mapping->host), PAGE_SIZE) - 1; end_pgoff = min(end_pgoff, file_end); ...... //nr_pages can be overflowed, cause xas.xa_index > end_pgoff end = folio_next_index(folio) - 1; nr_pages = min(end, end_pgoff) - xas.xa_index + 1; ...... //map large folio filemap_map_folio_range() ...... //truncate folios truncate_pagecache(inode, inode->i_size); To fix this issue, move the 'end_pgoff' calculation before next_uptodate_folio(), so the retrieved folio stays consistent with the file end to avoid ---truncated--- | |||||
| CVE-2026-31633 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix integer overflow in rxgk_verify_response() In rxgk_verify_response(), there's a potential integer overflow due to rounding up token_len before checking it, thereby allowing the length check to be bypassed. Fix this by checking the unrounded value against len too (len is limited as the response must fit in a single UDP packet). | |||||
| CVE-2026-31525 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN The BPF interpreter's signed 32-bit division and modulo handlers use the kernel abs() macro on s32 operands. The abs() macro documentation (include/linux/math.h) explicitly states the result is undefined when the input is the type minimum. When DST contains S32_MIN (0x80000000), abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged on arm64/x86. This value is then sign-extended to u64 as 0xFFFFFFFF80000000, causing do_div() to compute the wrong result. The verifier's abstract interpretation (scalar32_min_max_sdiv) computes the mathematically correct result for range tracking, creating a verifier/interpreter mismatch that can be exploited for out-of-bounds map value access. Introduce abs_s32() which handles S32_MIN correctly by casting to u32 before negating, avoiding signed overflow entirely. Replace all 8 abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers. s32 is the only affected case -- the s64 division/modulo handlers do not use abs(). | |||||
| CVE-2026-23457 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 8.6 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: fix Content-Length u32 truncation in sip_help_tcp() sip_help_tcp() parses the SIP Content-Length header with simple_strtoul(), which returns unsigned long, but stores the result in unsigned int clen. On 64-bit systems, values exceeding UINT_MAX are silently truncated before computing the SIP message boundary. For example, Content-Length 4294967328 (2^32 + 32) is truncated to 32, causing the parser to miscalculate where the current message ends. The loop then treats trailing data in the TCP segment as a second SIP message and processes it through the SDP parser. Fix this by changing clen to unsigned long to match the return type of simple_strtoul(), and reject Content-Length values that exceed the remaining TCP payload length. | |||||
| CVE-2026-23243 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/umad: Reject negative data_len in ib_umad_write ib_umad_write computes data_len from user-controlled count and the MAD header sizes. With a mismatched user MAD header size and RMPP header length, data_len can become negative and reach ib_create_send_mad(). This can make the padding calculation exceed the segment size and trigger an out-of-bounds memset in alloc_send_rmpp_list(). Add an explicit check to reject negative data_len before creating the send buffer. KASAN splat: [ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0 [ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102 [ 211.365867] ib_create_send_mad+0xa01/0x11b0 [ 211.365887] ib_umad_write+0x853/0x1c80 | |||||
| CVE-2026-23085 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Avoid truncating memory addresses On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem allocations to be backed by addresses physical memory above the 32-bit address limit, as found while experimenting with larger VMSPLIT configurations. This caused the qemu virt model to crash in the GICv3 driver, which allocates the 'itt' object using GFP_KERNEL. Since all memory below the 4GB physical address limit is in ZONE_DMA in this configuration, kmalloc() defaults to higher addresses for ZONE_NORMAL, and the ITS driver stores the physical address in a 32-bit 'unsigned long' variable. Change the itt_addr variable to the correct phys_addr_t type instead, along with all other variables in this driver that hold a physical address. The gicv5 driver correctly uses u64 variables, while all other irqchip drivers don't call virt_to_phys or similar interfaces. It's expected that other device drivers have similar issues, but fixing this one is sufficient for booting a virtio based guest. | |||||