Total
3831 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-95107 | 2026-10-20 | N/A | N/A | ||
| A ThreadX module chooses `object_size` when it calls `txm_module_object_allocate`. The Module Manager adds its own 16-byte private header to that size and asked the object pool for the result **without checking the addition**. A size near the top of a `ULONG` wrapped, the pool served a block far smaller than the header, and the manager then wrote the header past the end of it and into the neighbouring byte-pool block. | |||||
| CVE-2026-91189 | 2026-10-20 | N/A | N/A | ||
| The GUIX binary resource loader never checks that a font page's glyph range is well formed. `gx_page_header_first_glyph` and `gx_page_header_last_glyph` are read verbatim from the file and only the upper bound of `last_glyph` is validated, so a page declaring `first_glyph > last_glyph` makes `last - first + 1` underflow to a very large unsigned count. That count is multiplied by a glyph record size to reserve the load buffer, and the multiply is unchecked, so it wraps to a small value and the loader allocates a buffer far smaller than the data it is about to write. The load pass then recomputes the count in a narrower type and writes attacker-controlled glyph records into the undersized buffer. | |||||
| CVE-2026-57488 | 1 Pupnp Project | 1 Pupnp | 2026-10-20 | N/A | 7.1 HIGH |
| pupnp is an SDK for development of UPnP device and control point applications. Prior to 2.0.2, raw_to_int in upnp/src/genlib/net/http/httpparser.c parses Content-Length with strtol and casts the resulting long to a 32-bit int before the caller stores it as unsigned int. On LP64 systems, values greater than INT_MAX can truncate or wrap, so the HTTP parser can accept a body length different from the declared value. A remote adjacent-network peer can use the resulting parser disagreement to leave bytes to be interpreted as another request in persistent or proxied contexts, or can make a worker wait for an extremely large body and cause denial of service. This issue is fixed in 2.0.2. | |||||
| CVE-2026-43843 | 2026-10-20 | N/A | N/A | ||
| An integer overflow vulnerability in the license manager service could allow an unauthenticated attacker to crash the service. | |||||
| CVE-2026-86871 | 2026-10-20 | N/A | 5.9 MEDIUM | ||
| An integer underflow was addressed with improved input validation. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.8, macOS Tahoe 26.7. An attacker with control of a network file server may be able to cause unexpected system termination. | |||||
| CVE-2026-92157 | 2026-10-20 | N/A | 6.5 MEDIUM | ||
| F´ (F Prime) is a framework that enables development and deployment of spaceflight and other embedded software applications. Prior to 4.3.0, Svc::FileDownlink SendPartial range validation is vulnerable because unchecked startOffset plus length arithmetic bypasses the range check and stores a wrapped m_endOffset that is inconsistent with m_byteOffset. When an existing source file is larger than a valid startOffset and a SendPartial command supplies a length whose U32 sum with that offset wraps below the file size, under standard F Prime assertion handling, the first data-packet transition reaches FW_ASSERT and aborts or resets the process, causing denial of service. This issue is fixed in version 4.3.0. | |||||
| CVE-2026-72105 | 2026-10-19 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: dm-log: fix a bitset_size overflow on 32bit machines Commit c20e36b7631d ("dm log: fix out-of-bounds write due to region_count overflow") made sure that region_count could fit in an unsigned int. But the bitmap memory isn't allocated based on region_count. It uses bitset_size (a size_t variable). The first step of calculating bitset_size is to set it to region_count, rounded up to a multiple of BITS_PER_LONG. If region_size is less than BITS_PER_LONG smaller than UINT_MAX, it will get rounded up to 2^32. On a 32bit architecture, this will make bitset_size wrap around to 0 and fail, despite region_count being valid. Since bitset_size gets divided by 8, it can hold any valid region_count. It just needs a special case to handle the rollover. If it is 0, the value rolled over, and bitset size should be set to the number of bytes needed to hold 2^32 bits. | |||||
| CVE-2026-72014 | 2026-10-19 | N/A | 9.8 CRITICAL | ||
| In the Linux kernel, the following vulnerability has been resolved: drbd: reject data replies with an out-of-range payload size recv_dless_read() receives a P_DATA_REPLY from a peer into the bio of an outstanding read request. The peer-supplied payload length reaches it as the signed int data_size, and two peer-controlled inputs can make it negative. With a negotiated data-integrity-alg the digest length is subtracted first, so a reply whose payload is smaller than the digest underflows data_size. With no integrity algorithm (the default) data_size is assigned from the unsigned h95/h100 wire length and drbdd() never bounds it for a payload-carrying command, so a length above INT_MAX casts it negative; this path needs no non-default feature. The bio receive loop then computes expect = min_t(int, data_size, bv_len), which is negative, and drbd_recv_all_warn(mapped, expect) receives with a size_t of SIZE_MAX into the first mapped page. The sibling receive path read_in_block() is not affected: it uses an unsigned size and rejects it against DRBD_MAX_BIO_SIZE before receiving. Reject a data reply whose size is negative after the optional digest subtraction, covering both triggers. Impact: a malicious or man-in-the-middle DRBD peer copies attacker-chosen bytes past a bio page in the receiver, corrupting kernel memory. A node that reads from its peer (a diskless node, or read-balancing to the peer) is exposed in the default configuration; data-integrity-alg is not required. | |||||
| CVE-2026-68479 | 2026-10-19 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btrtl: validate firmware patch bounds rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the firmware version. A malformed firmware patch shorter than the version field can make this subtraction underflow and turn the copy into an oversized read and write during Bluetooth setup. The existing patch_offset + patch_length check can also wrap on 32-bit architectures. Validate the patch length and range without arithmetic overflow before allocating or copying the patch. | |||||
| CVE-2026-68373 | 2026-10-19 | N/A | 8.1 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: wifi: at76c50x-usb: avoid length underflow in at76_guess_freq() at76_guess_freq() checks only that the received frame is at least a bare 802.11 header (24 bytes) before subtracting the fixed management-body offset: len -= el_off; For both beacon and probe response frames, el_off is 36. If the frame is shorter than el_off, subtracting it causes the calculated IE length to wrap. The length is eventually passed to cfg80211_find_elem_match() as a very large unsigned value, so the element walk runs beyond the RX skb. This path is reached from at76_rx_tasklet() while scanning. If the device delivers a truncated beacon or probe response, the oversized IE length causes an out-of-bounds read during scanning. Skip the IE lookup if the frame does not reach the variable elements, before subtracting el_off. | |||||
| CVE-2026-68315 | 2026-10-19 | N/A | 7.5 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: sctp: validate stream count in sctp_process_strreset_inreq() When processing a RESET_IN_REQUEST from a peer, sctp_process_strreset_inreq() derives the stream count from the parameter length but does not check whether the resulting RESET_OUT_REQUEST would exceed SCTP_MAX_CHUNK_LEN. The OUT request header (sctp_strreset_outreq, 16 bytes) is 8 bytes larger than the IN request header (sctp_strreset_inreq, 8 bytes). Generally, the IP payload is bounded to 65535 bytes, so the stream list cannot be large enough to trigger the overflow. However, on interfaces with MTU > 65535 (e.g., loopback with IPv6 jumbograms), a stream list that fits within the incoming IN parameter can cause a __u16 overflow in sctp_make_strreset_req() when computing the OUT request size, leading to an undersized skb allocation and a kernel BUG: net/core/skbuff.c:207 skb_panic net/core/skbuff.c:2625 skb_put net/sctp/sm_make_chunk.c:1535 sctp_addto_chunk net/sctp/sm_make_chunk.c:3695 sctp_make_strreset_req net/sctp/stream.c:655 sctp_process_strreset_inreq The local setsockopt path validates the generated reset request size. However, for an incoming-only reset, it accounts for the smaller IN request even though the peer must generate an OUT request with the same stream list. Such a request cannot be completed successfully by the peer. Reject peer IN requests whose corresponding OUT request would exceed SCTP_MAX_CHUNK_LEN. Also tighten the local check so it does not send an IN request that would require an oversized OUT request from the peer. | |||||
| CVE-2026-68297 | 2026-10-19 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix u16 MTU truncation in media and bearer MTU validation Both TIPC_NL_MEDIA_SET and TIPC_NL_BEARER_SET accept user-supplied MTU values but only enforce a minimum bound, not a maximum. When a user sets the MTU to a value exceeding U16_MAX (65535), it passes validation but is silently truncated when assigned to u16 fields l->mtu and l->advertised_mtu in tipc_link_create(). Values like 65536 (0x10000) truncate to 0, causing a division by zero in tipc_link_set_queue_limits() which computes TIPC_MAX_PUBL / (l->mtu / ITEM_SIZE). Other overflowing values (e.g. 65537-131071) produce small incorrect MTU values, resulting in link malfunction behaviors. Crash stack (triggered as unprivileged user via user namespace): tipc_link_set_queue_limits net/tipc/link.c:2531 tipc_link_create net/tipc/link.c:520 tipc_node_check_dest net/tipc/node.c:1279 tipc_disc_rcv net/tipc/discover.c:252 tipc_rcv net/tipc/node.c:2129 tipc_udp_recv net/tipc/udp_media.c:392 Two independent paths lack the upper bound check: 1. tipc_udp_mtu_bad() -- called from __tipc_nl_media_set() (MEDIA_SET) 2. inline check in __tipc_nl_bearer_set() at bearer.c:1160 (BEARER_SET) Fix both by rejecting MTU values above U16_MAX. | |||||
| CVE-2025-14422 | 1 Gimp | 1 Gimp | 2026-10-19 | N/A | 7.8 HIGH |
| GIMP PNM File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of PNM files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28273. | |||||
| CVE-2025-14933 | 1 Unidata | 1 Netcdf | 2026-10-19 | N/A | 7.8 HIGH |
| NSF Unidata NetCDF-C NC Variable Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NSF Unidata NetCDF-C. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of NC variables. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-27266. | |||||
| CVE-2025-58771 | 2026-10-19 | N/A | N/A | ||
| AMI APTIOV contains vulnerabilities in BIOS where users may cause “Integer Overflow or Wraparound” by local access. Successful exploitation of this vulnerability could lead to buffer overflows, memory corruption, and arbitrary code execution, and also impact Confidentiality, Integrity, and Availability. | |||||
| CVE-2026-68257 | 2026-10-19 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix 32-bit overflow in CWSR total size calculation total_cwsr_size was computed in 32-bit before being used as a BO/SVM allocation size. With large ctx_save_restore_area_size and debug_memory_size multiplied by the XCC count, the product can wrap, yielding an undersized CWSR save area that firmware later overruns. Promote total_cwsr_size to u64 and use check_add_overflow()/ check_mul_overflow() in both kfd_queue_acquire_buffers() and kfd_queue_release_buffers(). (cherry picked from commit 319f7e13423ae3f486b9aea82f9ad2d6af0ee608) | |||||
| CVE-2026-68158 | 2026-10-19 | N/A | 9.8 CRITICAL | ||
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix multiplication overflow in decode_new_up_state_weight() If a message of type CEPH_MSG_OSD_MAP contains a (maliciously) corrupted osdmap, out-of-bounds memory accesses may occur in decode_new_up_state_weight(). This happens because the bounds check for the new_state part is based on calculating its length depending on a len value read from the incoming message. This calculation may overflow leading to an incorrect bounds check. Subsequently, out-of-bounds reads may occur when decoding this part. This patch switches the multiplication to use check_mul_overflow() to abort processing the osdmap if an overflow occurred. Therefore, osdmaps/messages containing large values for len that result in a multiplication overflow are treated as invalid. [ idryomov: rename new_state_len -> new_state_item_size, formatting ] | |||||
| CVE-2026-68145 | 2026-10-19 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: iomap: fix out-of-bounds bitmap_set() with zero-length range ifs_set_range_dirty() and ifs_set_range_uptodate() compute last_blk as (off + len - 1) >> i_blkbits. When off is 0 and len is 0, the unsigned subtraction underflows to SIZE_MAX, producing a huge last_blk and nr_blks value that causes bitmap_set() to write far beyond the ifs->state allocation. Regarding ifs_set_range_uptodate(), it is temporarily safe because len cannot be passed in as 0. However, for ifs_set_range_dirty() this is reachable from __iomap_write_end(): when copy_folio_from_iter_atomic() returns 0 (e.g. user buffer fault) and the folio is already uptodate, the guard at the top of __iomap_write_end() does not trigger because !folio_test_uptodate() is false, and iomap_set_range_dirty() is called with copied == 0. Add a !len guard to both functions before the computation, so that a zero-length range is a no-op. | |||||
| CVE-2026-68125 | 2026-10-19 | N/A | 8.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: mac802154: llsec: reject frames shorter than the authentication tag llsec_do_decrypt_auth() computes the associated-data length for the AEAD request as assoclen += datalen - authlen; where datalen is the number of bytes after the MAC header and authlen (4, 8 or 16) is the length of the authentication tag. Nothing verifies that the frame actually carries at least authlen payload bytes. A secured frame whose payload is shorter than the tag makes datalen - authlen negative; assoclen is then passed to aead_request_set_ad() as an unsigned value close to 4 GiB, so crypto_aead_decrypt() walks far off the end of the scatterlist that only spans the real frame. The frame is fully attacker-controlled and reaches this path from any IEEE 802.15.4 peer in radio range. Reject frames whose payload is shorter than the authentication tag before the subtraction. Dynamically reproduced on a KASAN kernel as a general-protection-fault in the AEAD scatterwalk, and the fix confirmed. | |||||
| CVE-2026-68108 | 2026-10-19 | N/A | 8.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vce: fix integer overflow in image size Fix a security vulnerability where malicious VCE command streams with oversized dimensions (e.g. 65536×65536) cause 32-bit integer overflow, wrapping the calculated buffer size to 0. This bypasses validation and allows GPU firmware to perform out-of-bound memory access. The fix uses 64-bit arithmetic to detect overflow and rejects invalid dimensions before they reach the hardware. V2: remove redundant check V3: modify max height value V4: remove size64 (cherry picked from commit cbe408dba581755ad1279a487ec786d8927d778d) | |||||