Vulnerabilities (CVE)

Filtered by vendor Linksys Subscribe
Total 223 CVE
CVE Vendors Products Updated CVSS v2 CVSS v3
CVE-2025-29229 1 Linksys 2 E5600, E5600 Firmware 2026-10-26 N/A 9.8 CRITICAL
linksys E5600 V1.1.0.26 is vulnerable to command injection in the function ddnsStatus.
CVE-2026-6992 1 Linksys 2 Mr9600, Mr9600 Firmware 2026-10-26 8.3 HIGH 7.2 HIGH
A vulnerability was identified in Linksys MR9600 2.0.6.206937. This affects the function BTRequestGetSmartConnectStatus of the file /etc/init.d/run_central2.sh of the component JNAP Action Handler. The manipulation of the argument pin leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2001-0514 3 Atmel, Linksys, Netgear 3 802.11b Vnet-b Access Point, Wap11, Me102 2026-10-09 7.5 HIGH N/A
SNMP service in Atmel 802.11b VNET-B Access Point 1.3 and earlier, as used in Netgear ME102 and Linksys WAP11, accepts arbitrary community strings with requested MIB modifications, which allows remote attackers to obtain sensitive information such as WEP keys, cause a denial of service, or gain access to the network.
CVE-2002-0109 1 Linksys 3 Befn2ps4, Befsr41, Befsr81 2026-10-09 6.4 MEDIUM N/A
Linksys EtherFast BEFN2PS4, BEFSR41, and BEFSR81 Routers, and possibly other products, allow remote attackers to gain sensitive information and cause a denial of service via an SNMP query for the default community string "public," which causes the router to change its configuration and send SNMP trap information back to the system that initiated the query.
CVE-2025-52692 1 Linksys 2 E9450-sg, E9450-sg Firmware 2026-09-30 N/A 8.8 HIGH
Successful exploitation of the vulnerability could allow an attacker with local network access to send a specially crafted URL to access certain administration functions without login credentials.
CVE-2025-14135 1 Linksys 12 Re6250, Re6250 Firmware, Re6300 and 9 more 2026-09-25 9.0 HIGH 8.8 HIGH
A vulnerability was identified in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function AP_get_wired_clientlist_setClientsName of the file mod_form.so. The manipulation of the argument clientsname_0 leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2025-14133 1 Linksys 12 Re6250, Re6250 Firmware, Re6300 and 9 more 2026-09-25 9.0 HIGH 8.8 HIGH
A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this vulnerability is the function AP_get_wireless_clientlist_setClientsName of the file mod_form.so. Performing manipulation of the argument clientsname_0 results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2025-14136 1 Linksys 12 Re6250, Re6250 Firmware, Re6300 and 9 more 2026-09-25 9.0 HIGH 8.8 HIGH
A security flaw has been discovered in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This vulnerability affects the function RE2000v2Repeater_get_wired_clientlist_setClientsName of the file mod_form.so. The manipulation of the argument clientsname_0 results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2025-60689 1 Linksys 2 E1200, E1200 Firmware 2026-07-22 N/A 5.4 MEDIUM
An unauthenticated command injection vulnerability exists in the Start_EPI function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The vulnerability occurs because user-supplied CGI parameters (wl_ant, wl_ssid, wl_rate, ttcp_num, ttcp_ip, ttcp_size) are concatenated into system command strings without proper sanitization and executed via wl_exec_cmd. Successful exploitation allows remote attackers to execute arbitrary commands on the device without authentication.
CVE-2024-40495 1 Linksys 2 E2500, E2500 Firmware 2026-07-09 N/A 8.0 HIGH
A vulnerability was discovered in Linksys Router E2500 with firmware 2.0.00, allows authenticated attackers to execute arbitrary code via the hnd_parentalctrl_unblock function.
CVE-2023-31742 1 Linksys 2 Wrt54gl, Wrt54gl Firmware 2026-07-09 N/A 7.2 HIGH
There is a command injection vulnerability in the Linksys WRT54GL router with firmware version 4.30.18.006. If an attacker gains web management privileges, they can inject commands into the post request parameters wl_ant, wl_rate, WL_atten_ctl, ttcp_num, ttcp_size in the httpd s Start_EPI() function, thereby gaining shell privileges.
CVE-2023-31741 1 Linksys 2 E2000, E2000 Firmware 2026-07-09 N/A 7.2 HIGH
There is a command injection vulnerability in the Linksys E2000 router with firmware version 1.0.06. If an attacker gains web management privileges, they can inject commands into the post request parameters wl_ssid, wl_ant, wl_rate, WL_atten_ctl, ttcp_num, ttcp_size in the httpd s Start_EPI() function, thereby gaining shell privileges.
CVE-2023-31740 1 Linksys 2 E2000, E2000 Firmware 2026-07-09 N/A 7.2 HIGH
There is a command injection vulnerability in the Linksys E2000 router with firmware version 1.0.06. If an attacker gains web management privileges, they can inject commands into the post request parameters WL_atten_bb, WL_atten_radio, and WL_atten_ctl in the apply.cgi interface, thereby gaining shell privileges.
CVE-2022-38555 1 Linksys 2 E1200, E1200 Firmware 2026-07-09 N/A 9.8 CRITICAL
Linksys E1200 v1.0.04 is vulnerable to Buffer Overflow via ej_get_web_page_name.
CVE-2025-60696 1 Linksys 2 Re7000, Re7000 Firmware 2026-07-05 N/A 8.4 HIGH
A stack-based buffer overflow vulnerability exists in the makeRequest.cgi binary of Linksys RE7000 routers (Firmware FW_v2.0.15_211230_1012). The arplookup function parses lines from /proc/net/arp using sscanf("%16s ... %18s ..."), storing results into buffers v6 (12 bytes) and v7 (20 bytes). Since the format specifiers allow up to 16 and 18 bytes respectively, oversized input can overflow the buffers, resulting in stack corruption. Local attackers controlling /proc/net/arp contents can exploit this issue to cause denial of service or potentially execute arbitrary code.
CVE-2025-60695 1 Linksys 2 E7350, E7350 Firmware 2026-07-05 N/A 5.9 MEDIUM
A stack-based buffer overflow vulnerability exists in the mtk_dut binary of Linksys E7350 routers (Firmware 1.1.00.032). The function sub_4045A8 reads up to 256 bytes from /sys/class/net/%s/address into a local buffer and then copies it into caller-provided buffer a1 using strcpy without boundary checks. Since a1 is often allocated with significantly smaller sizes (20-32 bytes), local attackers controlling the contents of /sys/class/net/%s/address can trigger buffer overflows, leading to memory corruption, denial of service, or potential arbitrary code execution.
CVE-2025-60694 1 Linksys 2 E1200, E1200 Firmware 2026-07-05 N/A 7.5 HIGH
A stack-based buffer overflow exists in the validate_static_route function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function improperly concatenates user-supplied CGI parameters (route_ipaddr_0~3, route_netmask_0~3, route_gateway_0~3) into fixed-size buffers (v6, v10, v14) without proper bounds checking. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication.
CVE-2025-60693 1 Linksys 2 E1200, E1200 Firmware 2026-07-05 N/A 6.5 MEDIUM
A stack-based buffer overflow exists in the get_merge_mac function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function concatenates up to six user-supplied CGI parameters matching <parameter>_0~5 into a fixed-size buffer (a2) without proper bounds checking, appending colon delimiters during concatenation. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication.
CVE-2025-60692 1 Linksys 2 E1200, E1200 Firmware 2026-07-05 N/A 8.4 HIGH
A stack-based buffer overflow vulnerability exists in the libshared.so library of Cisco Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The functions get_mac_from_ip and get_ip_from_mac use sscanf with overly permissive "%100s" format specifiers to parse entries from /proc/net/arp into fixed-size buffers (v6: 50 bytes, v7 sub-arrays: 50 bytes). This allows local attackers controlling the contents of /proc/net/arp to overflow stack buffers, leading to memory corruption, denial of service, or potential arbitrary code execution.
CVE-2025-60691 1 Linksys 2 E1200, E1200 Firmware 2026-07-05 N/A 8.8 HIGH
A stack-based buffer overflow exists in the httpd binary of Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The apply_cgi and block_cgi functions copy user-supplied input from the "url" CGI parameter into stack buffers (v36, v29) using sprintf without bounds checking. Because these buffers are allocated as single-byte variables, any non-empty input will trigger a buffer overflow. Remote attackers can exploit this vulnerability via crafted HTTP requests to execute arbitrary code or cause denial of service without authentication.