Total
87 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-95664 | 1 Apache | 1 Camel | 2026-10-28 | N/A | 5.4 MEDIUM |
| Improper Neutralization of Special Elements used in an Expression Language Statement ('Expression Language Injection') vulnerability in Apache Camel AWS2-s3 component. This issue affects Apache Camel: from 4.8.0 before 4.18.5, from 4.19.0 before 4.22.2. For the object it uploads, reads or deletes, the camel-aws2-s3 producer takes the key from the CamelAwsS3Key message header and falls back to the keyName option configured on the endpoint only when that header is absent. Since 4.8.0, AWS2S3Utils.determineKey() also passed the resulting value to the Simple language whenever it contained ${ or $simple{, so that a route could use a dynamic key, and the evaluation applied to a value taken from the header as well as to the configured option. The header is not route configuration, however: the aws2-s3 consumer sets CamelAwsS3Key on the exchanges it creates to the key of the object it read, that is, the name of the object in the bucket. In a route that does nothing more than consume from one aws2-s3 endpoint and produce to another, the name of each consumed object therefore reached the producer, and a name containing either marker was evaluated as an expression, although the route author never asked for any evaluation, and configuring keyName on the producer did not prevent it, because the header took precedence. A key that a route copied into the header from other message content was evaluated in the same way. Anyone able to choose the name of an object in a bucket that such a route consumes, typically a principal allowed to upload to that bucket, could therefore have Simple expressions of their choosing evaluated in the Camel process. The Simple language can read JVM system properties, environment variables and configuration properties, which commonly carry credentials, and, where camel-bean is on the classpath, invoke methods on beans in the registry. The evaluated result became the key the producer used, so reading a value back additionally required the ability to see object names in the destination bucket, while a method invocation took effect without it; together with the need to name an object in a consumed bucket, this is why the severity is assessed medium. The bucket name went through the same evaluation, but the consumer only ever places the bucket configured on its own endpoint in a bucket header, never a value derived from a remote object, so the bucket name was not reachable in this way. Releases before 4.8.0 used the key from the header as given and are not affected. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.8.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. After upgrading, a key or bucket name supplied through a message header is used literally, so a route that put an unevaluated Simple expression in the CamelAwsS3Key or CamelAwsS3OverrideBucketName header must evaluate it in the route instead, for example with setHeader and simple(), or configure it as the keyName or bucketName option of the endpoint. For deployments that cannot upgrade immediately, do not let a key derived from an object name or from other untrusted message content reach an aws2-s3 producer unchecked: in routes that pass exchanges from an aws2-s3 consumer to an aws2-s3 producer, either remove the CamelAwsS3Key header before the producer with removeHeader(“CamelAwsS3Key”), so that the keyName configured on the endpoint is used, or reject exchanges whose CamelAwsS3Key header contains ${ or $simple{. Configuring keyName alone is not a workaround, because the header takes precedence over it. As defence in depth, allow only trusted principals to write to buckets that Camel routes consume. | |||||
| CVE-2026-33453 | 1 Apache | 1 Camel | 2026-10-26 | N/A | 10.0 CRITICAL |
| Improperly Controlled Modification of Dynamically-Determined Object Attributes vulnerability in Apache Camel Camel-Coap component. Apache Camel's camel-coap component is vulnerable to Camel message header injection, leading to remote code execution when routes forward CoAP requests to header-sensitive producers (e.g. camel-exec) The camel-coap component maps incoming CoAP request URI query parameters directly into Camel Exchange In message headers without applying any HeaderFilterStrategy. Specifically, CamelCoapResource.handleRequest() iterates over OptionSet.getUriQuery() and calls camelExchange.getIn().setHeader(...) for every query parameter. CoAPEndpoint extends DefaultEndpoint rather than DefaultHeaderFilterStrategyEndpoint, and CoAPComponent does not implement HeaderFilterStrategyComponent; the component contains no references to HeaderFilterStrategy at all. As a result, an unauthenticated attacker who can send a single CoAP UDP packet to a Camel route consuming from coap:// can inject arbitrary Camel internal headers (those prefixed with Camel*) into the Exchange. When the route delivers the message to a header-sensitive producer such as camel-exec, camel-sql, camel-bean, camel-file, or template components (camel-freemarker, camel-velocity), the injected headers can alter the producer's behavior. In the case of camel-exec, the CamelExecCommandExecutable and CamelExecCommandArgs headers override the executable and arguments configured on the endpoint, resulting in arbitrary OS command execution under the privileges of the Camel process. The producer's output is written back to the Exchange body and returned in the CoAP response payload by CamelCoapResource, giving the attacker an interactive RCE channel without any need for out-of-band exfiltration. Exploitation prerequisites are minimal: a single unauthenticated UDP datagram to the CoAP port (default 5683). CoAP (RFC 7252) has no built-in authentication, and DTLS is optional and disabled by default. Because the protocol is UDP-based, HTTP-layer WAF/IDS controls do not apply. This issue affects Apache Camel: from 4.14.0 through 4.14.5, from 4.18.0 before 4.18.1, 4.19.0. Users are recommended to upgrade to version 4.18.1 or 4.19.0, fixing the issue. | |||||
| CVE-2026-33454 | 1 Apache | 1 Camel | 2026-10-26 | N/A | 9.4 CRITICAL |
| The Camel-Mail component is vulnerable to Camel message header injection. The custom header filter strategy used by the component (MailHeaderFilterStrategy) only filters the 'out' direction via setOutFilterStartsWith, while it does not configure the 'in' direction via setInFilterStartsWith. As a result, when a Camel application consumes mail through camel-mail (for example via from(\"imap://...\") or from(\"pop3://...\")) the inbound filter check is skipped and Camel-prefixed MIME headers are mapped unfiltered into the Exchange. An attacker who can deliver an email to a mailbox monitored by such a consumer can inject Camel-specific headers that, for some Camel components downstream of the mail consumer (such as camel-bean, camel-exec, or camel-sql), can alter the behaviour of the route. This is the same pattern that was previously addressed in camel-undertow (CVE-2025-30177) and the broader incoming-header filter (CVE-2025-27636 and CVE-2025-29891). This issue affects Apache Camel: from 3.0.0 before 4.14.6, from 4.15.0 before 4.18.1. Users are recommended to upgrade to version 4.19.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.1. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. | |||||
| CVE-2026-40858 | 1 Apache | 1 Camel | 2026-10-26 | N/A | 8.8 HIGH |
| The camel-infinispan component's ProtoStream-based remote aggregation repository deserializes data read from a remote Infinispan cache using java.io.ObjectInputStream without applying any ObjectInputFilter. An attacker who can write to the Infinispan cache used by a Camel application can inject a crafted serialized Java object that, when read during normal aggregation repository operations such as get or recover, results in arbitrary code execution in the context of the application. This issue affects Apache Camel: from 4.0.0 before 4.14.7, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0. Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.7. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2. The JIRA ticket: https://issues.apache.org/jira/browse/CAMEL-23322 refers to the various commits that resolved the issue, and have more details. This issue follows the same class of vulnerability previously addressed in CVE-2024-22369, CVE-2024-23114 and CVE-2026-25747. | |||||
| CVE-2026-40473 | 1 Apache | 1 Camel | 2026-10-26 | N/A | 8.8 HIGH |
| The camel-mina component's MinaConverter.toObjectInput(IoBuffer) type converter wraps an IoBuffer in a java.io.ObjectInputStream without applying any ObjectInputFilter or class-loading restrictions. When a Camel route uses camel-mina as a TCP or UDP consumer and requests conversion to ObjectInput (for example via getBody(ObjectInput.class) or @Body ObjectInput), an attacker sending a crafted serialized Java object over the network to the MINA consumer port can trigger arbitrary code execution in the context of the application during readObject(). This issue affects Apache Camel: from 3.0.0 before 4.14.6, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0. Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2. | |||||
| CVE-2026-40453 | 1 Apache | 1 Camel | 2026-10-26 | N/A | 9.9 CRITICAL |
| The fix for CVE-2025-27636 added setLowerCase(true) to HttpHeaderFilterStrategy so that case-variant header names such as 'CAmelExecCommandExecutable' are filtered out alongside 'CamelExecCommandExecutable'. The same setLowerCase(true) call was not applied to five non-HTTP HeaderFilterStrategy implementations: JmsHeaderFilterStrategy and ClassicJmsHeaderFilterStrategy in camel-jms, SjmsHeaderFilterStrategy in camel-sjms, CoAPHeaderFilterStrategy in camel-coap, and GooglePubsubHeaderFilterStrategy in camel-google-pubsub. Because those strategies use case-sensitive String.startsWith('Camel'/'camel') filtering while the Camel Exchange stores headers in a case-insensitive map, an attacker with JMS (or equivalent) producer access to the broker consumed by a Camel route can inject case-variant Camel internal headers, which are then resolved by downstream components such as camel-exec and camel-file using their canonical casing. This enables remote code execution and arbitrary file write on routes that forward JMS messages to header-driven components. This issue affects Apache Camel: from 3.0.0 before 4.14.6, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0. Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2. | |||||
| CVE-2026-40860 | 1 Apache | 1 Camel | 2026-10-26 | N/A | 9.8 CRITICAL |
| JmsBinding.extractBodyFromJms() in camel-jms, and the equivalent JmsBinding class in camel-sjms, deserialized the payload of incoming JMS ObjectMessage values via javax.jms.ObjectMessage.getObject() without applying any ObjectInputFilter, class allowlist or class denylist. Because this code path is reached whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer, an attacker able to publish a crafted ObjectMessage to a queue or topic consumed by a Camel application could achieve remote code execution when a deserialization gadget chain was present on the classpath. The same handling was reached transitively through camel-sjms2 (whose Sjms2Endpoint extends SjmsEndpoint) and through camel-amqp (whose AMQPJmsBinding extends JmsBinding), and by other JMS-family components built on JmsComponent such as camel-activemq and camel-activemq6. This issue affects Apache Camel: from 3.0.0 before 4.14.7, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0. Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.7. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2. | |||||
| CVE-2026-40048 | 1 Apache | 1 Camel | 2026-10-26 | N/A | 7.8 HIGH |
| The Camel-PQC FileBasedKeyLifecycleManager class deserializes the contents of `<keyId>.key` files in the configured key directory using java.io.ObjectInputStream without applying any ObjectInputFilter or class-loading restrictions. The cast to `java.security.KeyPair` is evaluated only after `readObject()` has already returned, so any `readObject()` side effects in the deserialized object run before the type check. An attacker who can write to the key directory used by a Camel application — for example through a path traversal into the directory, misconfigured filesystem permissions on the volume where keys are stored, a compromised key provisioning pipeline, or a symlink attack — can place a crafted serialized Java object that, when deserialized during normal key lifecycle operations, results in arbitrary code execution in the context of the application. This issue affects Apache Camel: from 4.19.0 before 4.20.0, from 4.18.0 before 4.18.2. Users are recommended to upgrade to version 4.20.0, which fixes the issue by replacing java.io.ObjectInputStream-based key and metadata storage with standard PKCS#8 (private key) / X.509 SubjectPublicKeyInfo (public key) Base64 JSON encoding. For users on the 4.18.x LTS releases stream, upgrade to 4.18.2. | |||||
| CVE-2026-27172 | 1 Apache | 1 Camel | 2026-10-26 | N/A | 8.8 HIGH |
| The ConsulRegistry in the camel-consul component (class org.apache.camel.component.consul.ConsulRegistry and its inner ConsulRegistryUtils.deserialize method) read Java-serialized values from the Consul KV store and passed them to ObjectInputStream.readObject() without configuring an ObjectInputFilter. An attacker who can write to the Consul KV store backing a Camel ConsulRegistry instance could inject a malicious serialized Java object that is deserialized the next time Camel performs a lookup against that registry, leading to arbitrary code execution in the Camel process. The issue mirrors the class of vulnerability already addressed for other Camel components in CVE-2024-22369, CVE-2024-23114 and CVE-2026-25747, and was overlooked during the original remediation of those CVEs. This issue affects Apache Camel: from 3.0.0 before 4.14.6, from 4.15.0 before 4.18.1. Users are recommended to upgrade to version 4.19.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.1. | |||||
| CVE-2026-40022 | 1 Apache | 1 Camel | 2026-10-26 | N/A | 8.2 HIGH |
| When authentication is enabled on the Apache Camel embedded HTTP server or embedded management server (camel-platform-http-main) and a non-root context path such as /api or /admin is configured via camel.server.path or camel.management.path, the BasicAuthenticationConfigurer and JWTAuthenticationConfigurer classes derive the authentication path from properties.getPath() when camel.server.authenticationPath / camel.management.authenticationPath is not explicitly set. Combined with the Vert.x sub-router mounting model - the sub-router is mounted at _path_* and the authentication handler is registered inside the sub-router at the resolved path - this causes the authentication handler to match only the exact configured context path, not its subpaths. Unauthenticated requests to subpaths such as /api/_route_ or /admin/observe/info therefore reach protected business routes and management endpoints without being challenged for credentials. The /observe/info endpoint can disclose runtime metadata such as the user, working directory, home directory, process ID, JVM and operating system information. This issue affects Apache Camel: from 4.14.1 before 4.14.6, from 4.18.0 before 4.18.2. Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, they are suggested to upgrade to 4.14.6. If users are on the 4.18.x LTS releases stream, they are suggested to upgrade to 4.18.2. | |||||
| CVE-2026-47323 | 1 Apache | 1 Camel | 2026-10-26 | N/A | 9.8 CRITICAL |
| Camel-CXF and Camel-Knative Message Header Injection via Missing Inbound Filtering The CXF and Knative HeaderFilterStrategy implementations (CxfRsHeaderFilterStrategy in camel-cxf-rest, CxfHeaderFilterStrategy in camel-cxf-transport, and KnativeHttpHeaderFilterStrategy in camel-knative-http) only filter outbound Camel-internal headers via setOutFilterStartsWith, while not configuring inbound filtering via setInFilterStartsWith. As a result, an unauthenticated attacker can inject Camel-internal headers (e.g. CamelExecCommandExecutable, CamelFileName) via HTTP requests to CXF-RS or CXF-SOAP endpoints. When a route forwards messages from these endpoints to header-driven components such as camel-exec or camel-file, the injected headers override configured values, enabling remote code execution or arbitrary file writes. This is the same pattern that was previously addressed in camel-undertow (CVE-2025-30177), the broader incoming-header filter (CVE-2025-27636 and CVE-2025-29891), and non-HTTP strategies (CVE-2026-40453). This issue affects Apache Camel: from 3.18.0 before 4.14.6, from 4.15.0 before 4.18.2. Users are recommended to upgrade to version 4.19.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.2. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. | |||||
| CVE-2026-46592 | 1 Apache | 1 Camel | 2026-10-25 | N/A | 7.5 HIGH |
| Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component. The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route. | |||||
| CVE-2026-46453 | 1 Apache | 1 Camel | 2026-10-25 | N/A | 5.3 MEDIUM |
| Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel ElasticSearch Rest Client. The camel-elasticsearch-rest-client component reads several Exchange headers to control its behaviour - SEARCH_QUERY (an advanced query body), OPERATION (which Elasticsearch operation to run), INDEX_NAME, INDEX_SETTINGS and ID. The string values of these header constants, defined in ElasticSearchRestClientConstant, are plain unprefixed names ('SEARCH_QUERY', 'OPERATION', 'INDEX_NAME', 'INDEX_SETTINGS', 'ID') rather than the 'Camel'-prefixed names used by every other Camel component (for example CamelSqlQuery, CamelMongoDbCriteria, CamelCqlQuery). Camel's inbound HTTP header filter, HttpHeaderFilterStrategy, blocks only header names that begin with 'Camel' or 'camel'. Because the Elasticsearch header names do not carry that prefix, they pass through the inbound filter unchanged. When a Camel route exposes an HTTP entry point (for example platform-http) in front of an elasticsearch-rest-client producer, an untrusted HTTP client can set these headers directly on its request and override the query and operation that the route author configured: reading every document in the index (SEARCH_QUERY with a match_all query), deleting documents (OPERATION set to Delete together with ID), or exfiltrating selected fields. No credentials are required and the producer reads the headers unconditionally. This issue affects Apache Camel: from 4.3.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix renames the camel-elasticsearch-rest-client Exchange header constant string values (ID, SEARCH_QUERY, INDEX_SETTINGS, INDEX_NAME, OPERATION) to carry the Camel prefix (CamelElasticsearchId, CamelElasticsearchSearchQuery, CamelElasticsearchIndexSettings, CamelElasticsearchIndexName, CamelElasticsearchOperation) so that they are blocked by the inbound HttpHeaderFilterStrategy; the Java field names are unchanged. For deployments that cannot upgrade immediately, strip the affected headers from untrusted inbound messages before they reach the producer (for example removeHeader('SEARCH_QUERY'), removeHeader('OPERATION'), removeHeader('INDEX_NAME'), removeHeader('INDEX_SETTINGS') and removeHeader('ID') in front of the elasticsearch-rest-client endpoint), or apply a custom HeaderFilterStrategy that blocks these names. | |||||
| CVE-2026-49086 | 1 Apache | 1 Camel | 2026-10-25 | N/A | 6.5 MEDIUM |
| Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel DAPR component. The camel-dapr Dapr Pub/Sub consumer (DaprPubSubConsumer) copied two fields from each inbound CloudEvent - its Pub/Sub component name and its topic - into the CamelDaprPubSubName and CamelDaprTopic Exchange headers. These two headers are producer-direction routing headers: when the route republishes through a Dapr producer, DaprConfigurationOptionsProxy reads them back and prefers them over the destination configured on the endpoint. As a result, in a route that consumes from one Dapr Pub/Sub topic and republishes to another (for example from('dapr-pubsub:p:t').to('dapr-pubsub:p:other')), an actor able to publish a message to the subscribed topic could set the CloudEvent's pub/sub-name and topic to values of their choosing and cause the re-published message to be delivered to an arbitrary Dapr Pub/Sub component and topic instead of the configured destination - redirecting or exfiltrating the message and bypassing the route's intended routing and any topic-level access controls in the underlying broker. Exploitation requires the ability to publish to the topic the route subscribes to; no other authentication or user interaction is needed. This issue affects Apache Camel: from 4.12.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, remove the CamelDaprPubSubName and CamelDaprTopic headers from the Exchange between the Dapr consumer and any Dapr producer in the route (for example removeHeaders('CamelDaprPubSubName', 'CamelDaprTopic')), and restrict who can publish to the subscribed Dapr Pub/Sub topic so that only trusted producers can send to it. | |||||
| CVE-2026-46587 | 1 Apache | 1 Camel | 2026-10-25 | N/A | 7.3 HIGH |
| Improper Input Validation vulnerability in Apache Camel. This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0. Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue. | |||||
| CVE-2026-46455 | 1 Apache | 1 Camel | 2026-10-25 | N/A | 9.8 CRITICAL |
| Insufficient Session Expiration vulnerability in Apache Camel Keycloak Component. The camel-keycloak security helper KeycloakSecurityHelper.parseAndVerifyAccessToken builds a Keycloak TokenVerifier using withChecks(...) with only the subject-exists check and the realm-URL (issuer) check. Keycloak's TokenVerifier.withChecks(...) appends to an initially empty check list - the upstream default checks are installed only when withDefaultChecks() is called - so the built-in IS_ACTIVE predicate, which validates the token's exp (expiration) and nbf (not-before) claims, is never applied. As a result the helper verifies the token signature, subject and issuer but does not enforce the token's validity window: an access token that is expired, or not yet valid, is accepted as valid. Routes that rely on this helper to authenticate inbound requests therefore accept access tokens that are outside their intended lifetime. This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes KeycloakSecurityHelper.parseAndVerifyAccessToken include the TokenVerifier.IS_ACTIVE check so that expired or not-yet-valid access tokens are rejected, aligning the helper with Keycloak's default check set. For deployments that cannot upgrade immediately, enforce token expiration outside the helper - for example validate the access token's exp/nbf claims in the route before trusting it, keep Keycloak access-token lifetimes short, and ensure any upstream gateway or resource server also validates the token validity window. | |||||
| CVE-2026-46588 | 1 Apache | 1 Camel | 2026-10-25 | N/A | 7.3 HIGH |
| Improper Input Validation vulnerability in Apache Camel. This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0. Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue. | |||||
| CVE-2026-46726 | 1 Apache | 1 Camel | 2026-10-25 | N/A | 7.5 HIGH |
| Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Vertx Websocket component. The camel-vertx-websocket consumer mapped inbound WebSocket query and path parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (VertxWebsocketConsumer.populateExchangeHeaders()). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the affected consumers apply a HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers. | |||||
| CVE-2026-40047 | 1 Apache | 1 Camel | 2026-10-25 | N/A | 9.1 CRITICAL |
| Improper Neutralization of Argument Delimiters in a Command ('Argument Injection') vulnerability in Apache Camel Docling component. The camel-docling component invokes the external `docling` command-line tool by assembling an argument list in DoclingProducer and executing it through java.lang.ProcessBuilder. Custom CLI arguments supplied through the `CamelDoclingCustomArguments` exchange header (a List<String>) were appended to that argument list with insufficient validation: the original implementation relied on a denylist of disallowed flags and only rejected path values that contained a literal `../` sequence. As a result, a Camel route that forwards externally-influenced data into the `CamelDoclingCustomArguments` header (or into the path-bearing headers used to build the invocation) could cause the producer to pass unrecognized or unintended `docling` CLI flags to the subprocess, and could supply path-like argument values that resolved outside the intended directory through traversal sequences not caught by the literal `../` check. Because Camel itself builds the `docling` invocation from these values, the component is responsible for constraining them, and the weak validation allowed CLI-argument injection and directory traversal in the arguments passed to the external tool. The invocation uses the list-based form of ProcessBuilder, so a shell does not interpret the argument values; OS command injection through shell metacharacters was not possible, and the metacharacter rejection added by the fix is defense-in-depth. This issue affects Apache Camel: from 4.15.0 before 4.18.3. Users are recommended to upgrade to a release that contains the CAMEL-23212 fix. On the mainline the fix is included from Apache Camel 4.19.0 (and later releases such as 4.20.0). For users on the 4.18.x LTS releases stream, upgrade to 4.18.3. The fix replaces the denylist with a strict allowlist of recognized `docling` CLI flags (rejecting any unrecognized flag, and rejecting producer-managed flags such as the output-directory flags), defensively rejects shell metacharacters in argument values, and normalizes path-like values with Path.normalize() before validating them so that traversal sequences which bypass a literal `../` check are detected. As defence in depth, route authors should avoid mapping untrusted message content into the `CamelDoclingCustomArguments` header and the path-bearing headers, and should strip Camel-internal headers from messages that arrive from untrusted producers. | |||||
| CVE-2026-46456 | 1 Apache | 1 Camel | 2026-10-25 | N/A | 9.8 CRITICAL |
| Improper Input Validation vulnerability in Apache Camel AWS2-SQS Component. The camel-aws2-sqs component map inbound message attributes into the Camel Exchange through a component-specific HeaderFilterStrategy. Sqs2HeaderFilterStrategy configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers being written to the broker) but did not configure an inbound filter. As a result, when Sqs2Consumer copies each SQS MessageAttribute into the Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, DefaultHeaderFilterStrategy applied no inbound rule and treated every header name as not filtered - including Camel-internal control headers such as CamelHttpUri, CamelFileName or CamelSqlQuery - copying them unmodified onto the Camel message. Any principal able to send messages to the consumed SQS queue (for example a cross-account sender or a lower-privileged in-account component holding sqs:SendMessage) could therefore set arbitrary Camel control headers that influence the behaviour of downstream producers in the route (for example redirecting an HTTP producer, changing a file name, or overriding a query); the injected headers also persist across internal direct, seda and vm hops. The concrete downstream impact depends on which producers the route uses. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds an inbound HeaderFilterStrategy rule to Sqs2HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so sender-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from inbound messages before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), and restrict who may send to the consumed SQS queue by applying least-privilege sqs:SendMessage permissions on the queue resource policy. | |||||