Filtered by vendor Apache
Subscribe
Total
3520 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-49098 | 1 Apache | 1 Camel | 2026-07-08 | N/A | 5.3 MEDIUM |
| Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel Kafka Component. The camel-kafka producer can override its configured target topic at runtime from the kafka.OVERRIDE_TOPIC Exchange header: KafkaProducer.evaluateTopic() returns the header value in preference to the topic configured on the endpoint. The control-header constants in KafkaConstants (for example OVERRIDE_TOPIC = kafka.OVERRIDE_TOPIC, OVERRIDE_TIMESTAMP = kafka.OVERRIDE_TIMESTAMP, PARTITION_KEY = kafka.PARTITION_KEY) used plain, non-Camel-prefixed values. camel-kafka's own KafkaHeaderFilterStrategy does filter the kafka.* namespace, but only on the Kafka-to-Exchange serialization boundary (reading Kafka record headers into the Exchange, and writing Exchange headers into a Kafka record); it does not apply to headers that arrive from an upstream consumer in a multi-component route. The upstream HTTP consumer uses HttpHeaderFilterStrategy, which blocks only the Camel / camel namespace, so a kafka.* header passes through unfiltered. As a result, in a route that bridges an HTTP consumer (for example platform-http) into a kafka: producer, any HTTP client could set the kafka.OVERRIDE_TOPIC header and cause the message to be published to an arbitrary Kafka topic instead of the configured one - redirecting it to a sensitive internal topic, or injecting attacker-crafted messages into a topic consumed by a critical downstream service. The related kafka.OVERRIDE_TIMESTAMP and kafka.PARTITION_KEY headers could likewise be injected to backdate messages or target specific partitions. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set or read Kafka headers via the raw header names must use the CamelKafka* names (for example CamelKafkaOverrideTopic and CamelKafkaTopic) instead of the old kafka.* values. For deployments that cannot upgrade immediately, strip the kafka.* headers from any untrusted ingress before the kafka: producer (for example removeHeaders('kafka.*') at the start of the route), and set the target topic from a trusted source. | |||||
| CVE-2026-49099 | 1 Apache | 1 Camel | 2026-07-08 | N/A | 5.3 MEDIUM |
| Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Salesforce Component. The camel-salesforce producer resolves its operation parameters - the SOQL query, the SOSL search, the target SObject name and id, the Apex REST URL and method, and the Apex query parameters - from Exchange message headers, reading the header in preference to the value configured on the endpoint (AbstractSalesforceProcessor.getParameter() reads the header first and uses the endpoint configuration only as a fallback). The control-header constants in SalesforceEndpointConfig (for example SOBJECT_QUERY = sObjectQuery, SOBJECT_SEARCH = sObjectSearch, SOBJECT_NAME = sObjectName, SOBJECT_ID = sObjectId, APEX_URL = apexUrl, APEX_METHOD = apexMethod, and the apexQueryParam. prefix) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a salesforce: producer, any HTTP client could therefore set these headers and override what the route intended - supplying its own SOQL query or SOSL search to read data from any SObject the connected Salesforce user can access, overriding the target SObject name and id for CRUD operations, or redirecting an Apex REST call to a different endpoint and HTTP method (including destructive methods) with injected query parameters. All such operations run with the full permissions of the Salesforce connected (integration) user, which is typically broad. No credentials are required from the attacker when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Salesforce operation parameters via the raw header names must use the CamelSalesforce* names (for example CamelSalesforceSObjectQuery and CamelSalesforceApexUrl) instead of the old sObject* / apex* values; the endpoint-option spelling is unchanged. For deployments that cannot upgrade immediately, strip the Salesforce control headers from any untrusted ingress before the salesforce: producer (for example removeHeaders('sObject*') and removeHeaders('apex*') at the start of the route), and set the query, SObject and Apex parameters from a trusted source. | |||||
| CVE-2026-49432 | 1 Apache | 1 Activemq | 2026-07-02 | N/A | 7.5 HIGH |
| Improper Input Validation vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Stomp. A remote unauthenticated peer that can reach an exposed STOMP connector can trigger denial-of-service behavior by sending a negative content-length. For the NIO STOMP transport, an attacker can keep streaming body bytes and grow the per-connection command buffer beyond configured limits to cause OOM. For the blocking STOMP protocol, an error will instead force abnormal transport exception handling for the affected connection and closure. This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Stomp: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue. | |||||
| CVE-2026-49434 | 1 Apache | 2 Activemq, Activemq Broker | 2026-07-02 | N/A | 7.5 HIGH |
| Improper Input Validation vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ, Apache ActiveMQ All. An attacker that has access to publish or modify entries in LDAP that match the configured searchBase and searchFilter can instantiate denied transports inside the broker JVM. This can be used to fetch an attacker URL and spawn a second BrokerService inside the same JVM. This issue affects Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue. | |||||
| CVE-2026-50750 | 1 Apache | 2 Activemq, Activemq Broker | 2026-07-02 | N/A | 7.5 HIGH |
| Denial of Service via Out of Memory vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ, Apache ActiveMQ All. Following the fix for CVE-2026-49270 an unauthenticated attacker can now cause broker OOM by sending an repeated BrokerInfo commands without sending a ConnectionInfo, until the broker will crash with OOM. This issue affects Apache ActiveMQ Broker: from 5.19.7 before 5.19.8, from 6.2.6 before 6.2.7; Apache ActiveMQ: from 5.19.7 before 5.19.8, from 6.2.6 before 6.2.7; Apache ActiveMQ All: from 5.19.7 before 5.19.8, from 6.2.6 before 6.2.7. Users are recommended to upgrade to version 6.2.7, which fixes the issue. | |||||
| CVE-2026-52760 | 1 Apache | 2 Activemq, Activemq Web | 2026-07-02 | N/A | 6.1 MEDIUM |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Apache ActiveMQ, Apache ActiveMQ Web Console. The browse page in the web console renders a message Id directly without sanitization. This allows an authenticated producer to send a message with a JMS message ID that has been crafted to contain HTML/JavaScript such that when an administrator browses the queue in the Web Console, the payload executes in their browser. This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Web Console: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue. | |||||
| CVE-2026-53916 | 1 Apache | 1 Activemq | 2026-07-02 | N/A | 7.5 HIGH |
| Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Stomp. An unauthenticated client that opens a STOMP NIO connection can send header bytes that never terminate which makes the broker buffer them without limit, exhausting the JVM heap. This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Stomp: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue. | |||||
| CVE-2026-53917 | 1 Apache | 2 Activemq, Activemq Broker | 2026-07-02 | N/A | 7.5 HIGH |
| Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ, Apache ActiveMQ All, Apache ActiveMQ Client, Apache ActiveMQ Broker. An authenticated user can cause a broker DoS by sending a crafted OpenWire Message with a large encoded size value for the map. OpenWire message property maps are unmarshaled without size validation which can trigger OOM and crash the broker. This issue affects Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Client: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue. | |||||
| CVE-2026-54475 | 1 Apache | 2 Activemq, Activemq Broker | 2026-07-02 | N/A | 7.5 HIGH |
| Missing Authorization vulnerability in Apache ActiveMQ Broker, Apache ActiveMQ All, Apache ActiveMQ. Apache ActiveMQ Classic temporary destinations are expected to be isolated to the connection that created them. The isolation can be broken as this is only checked in the client, allowing a different connection to consume from another connection's temporary destination. This issue affects Apache ActiveMQ Broker: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7, which fixes the issue. | |||||
| CVE-2026-50734 | 1 Apache | 1 Activemq | 2026-07-02 | N/A | 7.5 HIGH |
| Memory Allocation with Excessive Size Value vulnerability in Apache ActiveMQ Client, Apache ActiveMQ, Apache ActiveMQ All. An unauthenticated network attacker can cause a broker DoS by sending a crafted WireFormatInfo frame with a malicious large size value. The value is not validate and causes the broker to attempt allocation during pre-auth negotiation which can trigger OOM and crash the broker. This issue affects Apache ActiveMQ Client: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ: before 5.19.8, from 6.0.0 before 6.2.7; Apache ActiveMQ All: before 5.19.8, from 6.0.0 before 6.2.7. Users are recommended to upgrade to version 6.2.7 or 5.19.8, which fixes the issue. | |||||
| CVE-2023-33234 | 1 Apache | 1 Apache-airflow-providers-cncf-kubernetes | 2026-07-02 | N/A | 7.2 HIGH |
| Arbitrary code execution in Apache Airflow CNCF Kubernetes provider version 5.0.0 allows user to change xcom sidecar image and resources via Airflow connection. In order to exploit this weakness, a user would already need elevated permissions (Op or Admin) to change the connection object in this manner. Operators should upgrade to provider version 7.0.0 which has removed the vulnerability. | |||||
| CVE-2023-51702 | 1 Apache | 2 Airflow, Apache-airflow-providers-cncf-kubernetes | 2026-07-02 | N/A | 6.5 MEDIUM |
| Since version 5.2.0, when using deferrable mode with the path of a Kubernetes configuration file for authentication, the Airflow worker serializes this configuration file as a dictionary and sends it to the triggerer by storing it in metadata without any encryption. Additionally, if used with an Airflow version between 2.3.0 and 2.6.0, the configuration dictionary will be logged as plain text in the triggerer service without masking. This allows anyone with access to the metadata or triggerer log to obtain the configuration file and use it to access the Kubernetes cluster. This behavior was changed in version 7.0.0, which stopped serializing the file contents and started providing the file path instead to read the contents into the trigger. Users are recommended to upgrade to version 7.0.0, which fixes this issue. | |||||
| CVE-2026-25604 | 1 Apache | 1 Apache-airflow-providers-amazon | 2026-07-02 | N/A | 5.4 MEDIUM |
| In AWS Auth manager, the origin of the SAML authentication has been used as provided by the client and not verified against the actual instance URL. This allowed to gain access to different instances with potentially different access controls by reusing SAML response from other instances. You should upgrade to 9.22.0 version of provider if you use AWS Auth Manager. | |||||
| CVE-2025-3891 | 3 Apache, Debian, Redhat | 3 Http Server, Debian Linux, Enterprise Linux | 2026-06-29 | N/A | 7.5 HIGH |
| A flaw was found in the mod_auth_openidc module for Apache httpd. This flaw allows a remote, unauthenticated attacker to trigger a denial of service by sending an empty POST request when the OIDCPreservePost directive is enabled. The server crashes consistently, affecting availability. | |||||
| CVE-2022-36124 | 1 Apache | 1 Avro | 2026-06-23 | N/A | 7.5 HIGH |
| It is possible for a Reader to consume memory beyond the allowed constraints and thus lead to out of memory on the system. This issue affects Rust applications using Apache Avro Rust SDK prior to 0.14.0 (previously known as avro-rs). Users should update to apache-avro version 0.14.0 which addresses this issue. | |||||
| CVE-2026-32794 | 1 Apache | 1 Airflow Providers Databricks | 2026-06-17 | N/A | 4.8 MEDIUM |
| Improper Certificate Validation vulnerability in Apache Airflow Provider for Databricks. Provider code did not validate certificates for connections to Databricks back-end which could result in a man-of-a-middle attack that traffic is intercepted and manipulated or credentials exfiltrated w/o notice. This issue affects Apache Airflow Provider for Databricks: from 1.10.0 before 1.12.0. Users are recommended to upgrade to version 1.12.0, which fixes the issue. | |||||
| CVE-2026-32642 | 1 Apache | 1 Artemis | 2026-06-17 | N/A | 4.3 MEDIUM |
| Incorrect Authorization (CWE-863) vulnerability in Apache Artemis, Apache ActiveMQ Artemis exists when an application using the OpenWire protocol attempts to create a non-durable JMS topic subscription on an address that doesn't exist with an authenticated user which has the "createDurableQueue" permission but does not have the "createAddress" permission and address auto-creation is disabled. In this circumstance, a temporary address will be created whereas the attempt to create the non-durable subscription should instead fail since the user is not authorized to create the corresponding address. When the OpenWire connection is closed the address is removed. This issue affects Apache Artemis: from 2.50.0 through 2.52.0; Apache ActiveMQ Artemis: from 2.0.0 through 2.44.0. Users are recommended to upgrade to version 2.53.0, which fixes the issue. | |||||
| CVE-2026-30911 | 1 Apache | 1 Airflow | 2026-06-17 | N/A | 8.1 HIGH |
| Apache Airflow versions 3.1.0 through 3.1.7 missing authorization vulnerability in the Execution API's Human-in-the-Loop (HITL) endpoints that allows any authenticated task instance to read, approve, or reject HITL workflows belonging to any other task instance. Users are recommended to upgrade to Apache Airflow 3.1.8 or later, which resolves this issue. | |||||
| CVE-2026-28779 | 1 Apache | 1 Airflow | 2026-06-17 | N/A | 7.5 HIGH |
| Apache Airflow versions 3.1.0 through 3.1.7 session token (_token) in cookies is set to path=/ regardless of the configured [webserver] base_url or [api] base_url. This allows any application co-hosted under the same domain to capture valid Airflow session tokens from HTTP request headers, allowing full session takeover without attacking Airflow itself. Users are recommended to upgrade to Apache Airflow 3.1.8 or later, which resolves this issue. | |||||
| CVE-2026-28563 | 1 Apache | 1 Airflow | 2026-06-17 | N/A | 4.3 MEDIUM |
| Apache Airflow versions 3.1.0 through 3.1.7 /ui/dependencies endpoint returns the full DAG dependency graph without filtering by authorized DAG IDs. This allows an authenticated user with only DAG Dependencies permission to enumerate DAGs they are not authorized to view. Users are recommended to upgrade to Apache Airflow 3.1.8 or later, which resolves this issue. | |||||