Total
417593 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-99116 | 2026-10-31 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: net: psp: do not inherit the Rx association on clone sk->psp_assoc sits past sk_dontcopy_end, so sock_copy() copies it into every socket accepted from a listener without taking a reference, while inet_sock_destruct() puts for every inet socket. psp_twsk_init() does refcount_inc() for the timewait socket, so a child closing through TIME_WAIT cancels its own put and leaves the association with one reference and N timewait sockets holding the same pointer. Closing the listener frees it, and the timewait timers then put freed memory. Rejecting the association on a listening socket is not sufficient: a socket can acquire one while established and then be turned back into a listener, because tcp_disconnect() leaves sk->psp_assoc in place. BUG: KASAN: slab-use-after-free in psp_twsk_assoc_free+0x6f/0xf0 Write of size 4 at addr ffff888110f9255c by task swapper/7/0 psp_twsk_assoc_free+0x6f/0xf0 inet_twsk_put+0xda/0x1b0 call_timer_fn+0x53/0x2e0 __run_timers+0x764/0xa80 Freed by task 99: kfree+0x1a7/0x500 process_one_work+0x7ec/0x1100 An association carries a per-connection SPI and key, so a child must not inherit the parent's. Clear it on clone. | |||||
| CVE-2026-99112 | 2026-10-31 | N/A | 7.1 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flower: validate mask pointer after nla_next() fl_set_enc_opt() iterates the key's nested tunnel-option attributes with nla_for_each_attr() while advancing a single mask pointer via nla_next() at the bottom of each loop, so the mask cursor is driven by the number of key attributes rather than by the mask's own attributes. The nla_ok() added by commit c96adff956191 ("cls_flower: call nla_ok() before nla_next()") only validates the mask pointer that was just consumed; the pointer produced by nla_next() is used by the next iteration (fl_set_geneve_opt() and siblings) without any validation. The mask's nested attributes are validated with NL_VALIDATE_LIBERAL, which merely warns on trailing bytes that do not form a complete attribute. A mask carrying one valid attribute plus 1-3 residue bytes (or a non-aligned attribute length making msk_depth negative) therefore reaches the next iteration with msk_depth != 0, so neither the !msk_depth check in fl_set_enc_opt() nor the !depth check in the per-type helpers fires. nla_type() then reads past the mask payload and nla_parse_nested_deprecated() iterates with an nla_len taken from those bytes, reading well beyond the mask attribute (KASAN: slab-out-of-bounds read in __nla_validate_parse from fl_change()). Validate the advanced mask pointer as well: when the mask is not legitimately exhausted (msk_depth != 0) and the new pointer fails nla_ok(), reject the filter with -EINVAL. An exactly exhausted mask still skips the check, preserving exact-match behaviour for the remaining key attributes. | |||||
| CVE-2026-99110 | 2026-10-31 | N/A | 7.0 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in cifs_do_set_acl() cifs_set_acl() validates ACL size using posix_acl_xattr_size(): 4 + (count * 8) // 4-byte header + 8 bytes per ACE cifs_do_set_acl() then calls posix_acl_to_cifs() to write the CIFS wire format into the same buffer: 6 + (count * 10) // 6-byte header + 10 bytes per ACE An ACL that passes the xattr-based check in cifs_set_acl() can overflow the heap when posix_acl_to_cifs() writes the larger CIFS format. Validate the CIFS format size against the remaining buffer space and USHRT_MAX before converting--data_count is __u16, so sizes above USHRT_MAX truncate the on-wire packet length, causing the server to apply a partial ACL. Replace MaxDataCount = 1000 with min(CIFSMaxBufSize, USHRT_MAX). | |||||
| CVE-2026-99109 | 2026-10-31 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject SetEA requests that do not fit the request buffer CIFSSMBSetEA() copies the caller's extended attribute value into the SMB request buffer without checking that it fits. The requirement is stated in the source but was never implemented: /*BB add length check to see if it would fit in negotiated SMB buffer size BB */ /* if (ea_value_len > buffer_size - 512 (enough for header)) */ if (ea_value_len) memcpy(parm_data->list.name + name_len + 1, ea_value, ea_value_len); The only bound applied on the way in is in cifs_xattr_set(): #define MAX_EA_VALUE_SIZE CIFSMaxBufSize ... if (size > MAX_EA_VALUE_SIZE) CIFSMaxBufSize is the full payload capacity of the buffer, so a value of exactly that size leaves no room for the SMB header, the TRANS2 parameter block, the fealist header and the EA name that are written ahead of it in the same object. SendReceive() already enforces the correct limit on this very length: if (in_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) but it is called after the copy has taken place. An unprivileged setxattr(2) on an SMB1 mount with a 250-byte name and a 16384-byte value writes 16384 bytes starting 345 bytes into a 16588-byte cifs_request object, ending 141 bytes past it: BUG: KASAN: slab-out-of-bounds in CIFSSMBSetEA+0xabc/0xde0 Write of size 16384 at addr ffff888003aa0159 by task init/68 __asan_memcpy+0x3c/0x60 CIFSSMBSetEA+0xabc/0xde0 cifs_xattr_set+0xd3a/0xff0 __vfs_setxattr+0x13e/0x1a0 The buggy address is located 345 bytes inside of allocated 16588-byte region Apply SendReceive()'s limit to the assembled request before the copy rather than after it, and widen the byte counters so the sum cannot wrap before it is tested. byte_count is also tested against U16_MAX, because it is stored in the 16-bit pSMB->ByteCount. That becomes reachable when CIFSMaxBufSize is raised at module load, where it may be set as high as 1024*127: with a 5-byte EA name and a 65521-byte value, count is exactly U16_MAX while byte_count is 65556, and cpu_to_le16() would truncate it to 20 and transmit a frame whose ByteCount does not match its length. Testing byte_count covers count as well, since byte_count is the larger of the two and count's only 16-bit consumer is written after this point. check_add_overflow() is evaluated first so that total_len is assigned before it is reported. | |||||
| CVE-2026-99107 | 2026-10-31 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix incorrect MFT record pointer passed to ntfs_attr_record_resize ntfs_new_attr_flags() passes the wrong MFT record to ntfs_attr_record_resize(). When the attribute is in an extent record, ctx->mrec points to the extent but the function receives the base record pointer m, causing incorrect size calculations in memmove. Fix by passing ctx->mrec (the actual MFT record containing the attribute) instead of m (the base MFT record) to ntfs_attr_record_resize(). | |||||
| CVE-2026-99099 | 2026-10-31 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: x86/CPU/AMD: Fix AMD TLBI Erratum #1718 The processor may fail to invalidate a TLB entry while executing an INVLPGB/TLBSYNC instruction pair. Detect the erratum and apply a software workaround when a microcode fix is not present. | |||||
| CVE-2026-99094 | 2026-10-31 | N/A | 7.5 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix TX descriptor bounds check btintel_pcie_prepare_tx() uses tfd_index to access the TFD and data buffer arrays before the index is advanced modulo txq->count. An index equal to txq->count is one past the end of both arrays, so reject it in the bounds check. | |||||
| CVE-2026-15272 | 2026-10-31 | N/A | 6.5 MEDIUM | ||
| The Web 2.0 Directory plugin for WordPress is vulnerable to time-based SQL Injection via the 'w2dc_level_filter' parameter in all versions up to, and including, 2.10.12 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. Because the parameter is used in integer context without surrounding quotes, WordPress's built-in addslashes/magic_quotes escaping provides no protection against time-based payloads such as SLEEP-based conditionals. | |||||
| CVE-2026-96554 | 2026-10-31 | N/A | 6.4 MEDIUM | ||
| The BuddyBoss Platform plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Group Name in all versions up to, and including, 3.6.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This requires the "Enable social group creation by all members" setting to be enabled, which is the default and permits Subscriber-level users to create groups; exploitation is not possible if group creation is restricted to administrators. | |||||
| CVE-2026-76010 | 2026-10-31 | N/A | 8.8 HIGH | ||
| The Photo Gallery, Sliders, Proofing and Themes – NextGEN Gallery plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 4.4.1 via the render_image function. This is due to unrestricted mass assignment of caller-supplied meta_data keys onto the image model combined with missing realpath containment in path construction and a bypassable signature check on the public image delivery route. This makes it possible for authenticated attackers, with custom-level access and above, to execute code on the server. Exploitation requires the authenticated attacker to own at least one NextGEN gallery — a condition that can be satisfied by any Subscriber who was ever granted the 'NextGEN Manage gallery' capability, and that access is retained indefinitely due to the stored gallery-author equality fallback in _can_manage_gallery() even after the capability is revoked. | |||||
| CVE-2026-120194 | 2026-10-31 | N/A | 7.5 HIGH | ||
| A flaw was found in json-glib. The JSONPath slice evaluator used by json_path_query() can enter an infinite loop when given a slice expression with a negative step. An application that evaluates attacker-controlled JSONPath expressions can be forced into a hang, leading to a denial of service. | |||||
| CVE-2026-120114 | 2026-10-31 | N/A | 7.2 HIGH | ||
| The Debug Log Manager – Conveniently Monitor and Inspect Errors plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'message (and pageUrl)' parameter in all versions up to, and including, 2.5.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Successful exploitation requires that the site administrator has debug logging enabled with JS error logging active, and that the attacker can obtain the publicly emitted dlmVars.jsErrorLogging nonce — which is broadcast on every frontend page — to pass the nonce check on the unauthenticated endpoint. | |||||
| CVE-2026-118599 | 2026-10-31 | N/A | 5.5 MEDIUM | ||
| A file overwrite vulnerability exists in Epiphany when installing WebExtension packages from .xpi files. In src/webextension/ephy-web-extension-manager.c, decompress_xpi_thread() used libarchive with archive_read_support_format_all() (and filters), so the installer did not require a real ZIP. A TAR file named *.xpi was extracted. TAR supports hard-link entry types; with Epiphany's archive_write_disk options (including ARCHIVE_EXTRACT_PERM), a crafted hard-link target can cause an attacker-chosen existing user-writable file to be truncated and overwritten with attacker-controlled content and mode bits, without a dedicated warning dialog, when the user installs or opens the crafted .xpi. This is related to but separate from the ZIP-slip path traversal fixed as CVE-2026-77679 (#2922 / MR !2143). Requirements: the victim must install or open a malicious WebExtension (.xpi). Affected: Epiphany >= 47.0 (WebExtension XPI install path). Fixed: https://gitlab.gnome.org/GNOME/epiphany/-/merge_requests/2248 (commit 0cc9ab55 — only enable ZIP format support). Upstream: https://gitlab.gnome.org/GNOME/epiphany/-/work_items/2988 Reporter acknowledgment: Fernando Munoz | |||||
| CVE-2026-118598 | 2026-10-31 | N/A | 6.5 MEDIUM | ||
| A logic error in Epiphany's site permission handling can cause camera and microphone access to be granted when the user only approves a different permission. In src/ephy-window.c, set_permission() stores the user's Allow/Deny choice after a WebKit permission dialog. Types CLIPBOARD and WEBSITE_DATA_ACCESS are not stored by ephy_permission_is_stored_by_permissions_manager(), so control fell into an else-if that was written as: } else if (EPHY_PERMISSION_TYPE_ACCESS_WEBCAM_AND_MICROPHONE) { Because that expression is a non-zero enum constant, the branch always ran for those types and wrote EPHY_PERMISSION_PERMIT for both ACCESS_WEBCAM and ACCESS_MICROPHONE for the site origin. The user only saw a Clipboard or Website Data Access dialog. A malicious site that obtains approval for clipboard or third-party storage access can afterwards use getUserMedia without a further camera/microphone prompt, exposing audiovisual confidentiality. Requirements: the victim must visit a malicious page and click Allow on a clipboard or website-data-access prompt. Affected: Epiphany >= 45.0 (bug present at least through 51.x). Fixed: https://gitlab.gnome.org/GNOME/epiphany/-/merge_requests/2249 (commit 480c3648). Upstream: https://gitlab.gnome.org/GNOME/epiphany/-/work_items/2976 Reporter acknowledgment: Fernando Munoz | |||||
| CVE-2026-116752 | 2026-10-31 | N/A | 6.4 MEDIUM | ||
| The GeoDirectory – WP Business Directory Plugin and Classified Listings Directory plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'post_images' parameter in all versions up to, and including, 2.8.197 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The injected payload does not fire for the attacker directly; it executes in the browser of any Administrator or Editor who opens the pending listing's edit screen, making this a privilege-escalation-capable stored XSS chain triggered through normal editorial workflow. | |||||
| CVE-2026-109231 | 2026-10-31 | N/A | 4.3 MEDIUM | ||
| The Germanized for WooCommerce plugin for WordPress is vulnerable to Unauthorized Access of Private Data via Activation Token Reuse in versions up to, and including, 4.1.4. This is due to the `on_user_email_changed` hook — which is responsible for rotating the activation token and recording a pending-email-change marker on an unactivated Customer account — only being registered inside the `is_double_opt_in_login_enabled()` branch when "Disable login for unactivated customers" is set to Yes, leaving the original `?activate=` token valid and entirely unbound to the email address it was issued for when that setting is No. This makes it possible for authenticated attackers, with Subscriber-level access and above, to change their account email to a victim's billing email via the standard `/my-account/edit-account/` form and then redeem their original activation token through `customer_account_activate()`, triggering `link_customer_past_orders()` to reassign any matching guest order to the attacker's account and exposing the original buyer's billing name, street address, phone number, and purchased items on the attacker's My Account order page. Exploitation requires the site to have double opt-in enabled with "Disable login for unactivated customers" explicitly set to No (a non-default configuration), public customer registration enabled, and the original activation token redeemed within its one-day expiry window. | |||||
| CVE-2026-109197 | 2026-10-31 | N/A | 7.5 HIGH | ||
| The WP Directory Kit plugin for WordPress is vulnerable to generic SQL Injection via the 'idfield' parameter in all versions up to, and including, 1.6.0 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. | |||||
| CVE-2026-107711 | 2026-10-31 | N/A | 6.4 MEDIUM | ||
| The FlexStock – Product Stock Sync with Google Sheets for WooCommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'products[].post_content' parameter in all versions up to, and including, 3.17.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This is exploitable by any Subscriber-level user because the plugin's admin_enqueue_scripts callback exposes the REST bearer token in the Dashboard page source via wp_localize_script() without a capability check, and the REST endpoint's permission_callback validates only that bearer token rather than performing a current_user_can() capability check. | |||||
| CVE-2026-107565 | 2026-10-31 | N/A | 5.1 MEDIUM | ||
| A flaw was found in luksmeta. A local attacker with administrative privileges can cause data corruption when saving metadata to a Linux Unified Key Setup (LUKS) device. Due to incorrect boundary calculations and flawed overlap detection, new metadata entries can be written beyond available free space or over existing records. This issue can corrupt stored encrypted payload data or existing metadata, potentially rendering the affected data inaccessible. | |||||
| CVE-2026-104926 | 2026-10-31 | N/A | 6.1 MEDIUM | ||
| The WooCommerce Extra Product Options Pro plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the '<fieldname>_start / <fieldname>_end' parameter in all versions up to, and including, 3.3.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. This vulnerability is only exploitable on product pages where a Date & Time Range Picker extra field is configured, though the required field name is visible in the product page source and requires no prior knowledge to discover. | |||||