Total
395949 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-42055 | 2 F5, Redhat | 11 Dos, Nginx Gateway Fabric, Nginx Ingress Controller and 8 more | 2026-09-14 | N/A | 8.1 HIGH |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_proxy_v2_module and ngx_http_grpc_module modules. This vulnerability exists when the proxy_http_version to 2 or grpc_pass directives are used to proxy HTTP/2 traffic, the ignore_invalid_headers directive is set to off, and the large_client_header_buffers directive size is larger than 2 megabytes. A remote, unauthenticated attacker, along with conditions beyond their control, could send large headers while creating an upstream request. This may cause a heap-based buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | |||||
| CVE-2026-40984 | 2026-09-14 | N/A | 7.5 HIGH | ||
| In Micrometer, it is possible for a user to provide specially crafted HTTP requests that may cause a denial-of-service (DoS) condition. Affected versions: micrometer-core 1.16.0 through 1.16.5; 1.15.0 through 1.15.11; 1.14.0 through 1.14.15; 1.13.0 through 1.13.18; 1.9.0 through 1.9.17. micrometer-jetty11 1.16.0 through 1.16.5; 1.15.0 through 1.15.11; 1.14.0 through 1.14.15; 1.13.0 through 1.13.18. micrometer-jetty12 1.16.0 through 1.16.5; 1.15.0 through 1.15.11; 1.14.0 through 1.14.15; 1.13.0 through 1.13.18. | |||||
| CVE-2026-40983 | 2026-09-14 | N/A | 7.5 HIGH | ||
| In Micrometer, it is possible for a user to provide specially crafted gRPC requests that may cause a denial-of-service (DoS) condition. Affected versions: Micrometer 1.16.0 through 1.16.5; 1.15.0 through 1.15.11. | |||||
| CVE-2026-3009 | 1 Redhat | 4 Build Of Keycloak, Jboss Enterprise Application Platform, Jboss Enterprise Application Platform Expansion Pack and 1 more | 2026-09-14 | N/A | 8.1 HIGH |
| A security flaw in the IdentityBrokerService.performLogin endpoint of Keycloak allows authentication to proceed using an Identity Provider (IdP) even after it has been disabled by an administrator. An attacker who knows the IdP alias can reuse a previously generated login request to bypass the administrative restriction. This undermines access control enforcement and may allow unauthorized authentication through a disabled external provider. | |||||
| CVE-2026-38998 | 2026-09-14 | N/A | 6.5 MEDIUM | ||
| A use-after-free in the SocketDescriptor::tcpReadHandler1 function (liveMedia/RTPInterface.cpp) of LIVE555 Streaming Media (version 2026.02.26) allows attackers to cause a Denial of Service (DoS) via sending a series of crafted RTSP and HTTP requests to the server. | |||||
| CVE-2026-34355 | 1 Apache | 1 Http Server | 2026-09-14 | N/A | 7.5 HIGH |
| A buffer overflow in mod_proxy_html in Apache HTTP Server 2.4.67 and earlier allows an attack by an untrusted backend. Users are recommended to upgrade to version 2.4.68, which fixes this issue. | |||||
| CVE-2026-33871 | 1 Netty | 1 Netty | 2026-09-14 | N/A | 7.5 HIGH |
| Netty is an asynchronous, event-driven network application framework. In versions prior to 4.1.132.Final and 4.2.10.Final, a remote user can trigger a Denial of Service (DoS) against a Netty HTTP/2 server by sending a flood of `CONTINUATION` frames. The server's lack of a limit on the number of `CONTINUATION` frames, combined with a bypass of existing size-based mitigations using zero-byte frames, allows an user to cause excessive CPU consumption with minimal bandwidth, rendering the server unresponsive. Versions 4.1.132.Final and 4.2.10.Final fix the issue. | |||||
| CVE-2026-33870 | 1 Netty | 1 Netty | 2026-09-14 | N/A | 7.5 HIGH |
| Netty is an asynchronous, event-driven network application framework. In versions prior to 4.1.132.Final and 4.2.10.Final, Netty incorrectly parses quoted strings in HTTP/1.1 chunked transfer encoding extension values, enabling request smuggling attacks. Versions 4.1.132.Final and 4.2.10.Final fix the issue. | |||||
| CVE-2026-28780 | 1 Apache | 1 Http Server | 2026-09-14 | N/A | 9.8 CRITICAL |
| Heap-based Buffer Overflow vulnerability in mod_proxy_ajp of Apache HTTP Server. If mod_proxy_ajp connects to a malicious AJP server this AJP server can send a malicious AJP message back to mod_proxy_ajp and cause it to write 4 attacker controlled bytes after the end of a heap based buffer. This issue affects Apache HTTP Server: through 2.4.66. Users are recommended to upgrade to version 2.4.67, which fixes the issue. | |||||
| CVE-2026-27830 | 2026-09-14 | N/A | 8.0 HIGH | ||
| c3p0, a JDBC Connection pooling library, is vulnerable to attack via maliciously crafted Java-serialized objects and `javax.naming.Reference` instances. Several c3p0 `ConnectionPoolDataSource` implementations have a property called `userOverridesAsString` which conceptually represents a `Map<String,Map<String,String>>`. Prior to v0.12.0, that property was maintained as a hex-encoded serialized object. Any attacker able to reset this property, on an existing `ConnectionPoolDataSource` or via maliciously crafted serialized objects or `javax.naming.Reference` instances could be tailored execute unexpected code on the application's `CLASSPATH`. The danger of this vulnerability was strongly magnified by vulnerabilities in c3p0's main dependency, mchange-commons-java. This library includes code that mirrors early implementations of JNDI functionality, including ungated support for remote `factoryClassLocation` values. Attackers could set c3p0's `userOverridesAsString` hex-encoded serialized objects that include objects "indirectly serialized" via JNDI references. Deserialization of those objects and dereferencing of the embedded `javax.naming.Reference` objects could provoke download and execution of malicious code from a remote `factoryClassLocation`. Although hazard presented by c3p0's vulnerabilites are exarcerbated by vulnerabilities in mchange-commons-java, use of Java-serialized-object hex as the format for a writable Java-Bean property, of objects that may be exposed across JNDI interfaces, represents a serious independent fragility. The `userOverridesAsString` property of c3p0 `ConnectionPoolDataSource` classes has been reimplemented to use a safe CSV-based format, rather than rely upon potentially dangerous Java object deserialization. c3p0-0.12.0+ and above depend upon mchange-commons-java 0.4.0+, which gates support for remote `factoryClassLocation` values by configuration parameters that default to restrictive values. c3p0 additionally enforces the new mchange-commons-java `com.mchange.v2.naming.nameGuardClassName` to prevent injection of unexpected, potentially remote JNDI names. There is no supported workaround for versions of c3p0 prior to 0.12.0. | |||||
| CVE-2026-18090 | 2026-09-14 | N/A | 6.1 MEDIUM | ||
| A flaw was found in gdk-pixbuf. This vulnerability allows a remote attacker to cause a heap out-of-bounds read by providing a specially crafted Apple Icon Image (.icns) file. The uncompress() function, which handles RLE-encoded ICNS icon data, fails to validate the source buffer's boundaries during decompression. This can lead to a denial of service, where the application crashes, or to information disclosure, potentially revealing sensitive data from adjacent memory. | |||||
| CVE-2026-74474 | 2026-09-14 | N/A | 9.8 CRITICAL | ||
| In the Linux kernel, the following vulnerability has been resolved: vxlan: use pskb_network_may_pull() for transmit path header pulls In vxlan_xmit(), arp_reduce(), and vxlan_mdb_entry_skb_get(), pskb_may_pull() was being called to verify the availability of network layer headers (ARP, IPv6/ND, IP/IPv6 MDB keys). However, during transmit skb->data points to the MAC header, so skb_network_offset(skb) is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, len) only checks len bytes from skb->data rather than skb_network_offset(skb) + len, which can leave part of the network header in non-linear frags. Replace these remaining pskb_may_pull() calls with pskb_network_may_pull() to properly account for the MAC header offset. | |||||
| CVE-2026-74378 | 2026-09-14 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix TOCTOU heap overflow in get_srq_wqe get_srq_wqe() reads wqe->dma.num_sge from the shared receive queue buffer, which is mapped into userspace. It validates num_sge against max_sge, but then re-reads the same field to calculate the memcpy size. A concurrent userspace thread can modify num_sge between validation and use, causing a heap buffer overflow when copying the WQE into qp->resp.srq_wqe. Read num_sge into a local variable and use it for both the bounds check and the size calculation. | |||||
| CVE-2026-74371 | 2026-09-14 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40 bytes, which was the layout before the addition of 'query.revision'), the kernel performs an out-of-bounds write. Fix this by propagating the user-provided attribute size 'uattr_size' down to the cgroup query handlers, and conditionally skipping writing the revision field to userspace when the provided buffer size is insufficient. query.revision in bpf_mprog_query is structurally identical to the cgroup case: a late tail field, written unconditionally. But the backward-compat hazard is not the same. The min-historical-size test is per command, and bpf_mprog_query only serves attach types that were born with revision in the struct: - tcx_prog_query -> BPF_TCX_INGRESS/EGRESS - netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER tcx, netkit, the revision field, and bpf_mprog_query itself all landed in the same v6.6 merge window (053c8e1f235d added the mprog query API + revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about revision. So for these commands the minimum legitimate struct already covers offset 56-64 — no old binary can be broken here. Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in 2017; revision write-back was bolted on years later (120933984460). That path has a real population of pre-revision callers. | |||||
| CVE-2026-74334 | 2026-09-14 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: RDMA/nldev: Fix locking when accessing mr->pd Sashiko points out that, due to rereg_mr, the PD is actually variable and all the touches in nldev are racy. Use mr->device instead of mr->pd->device. Getting the PD restrack ID is more tricky. To avoid disturbing all the happy paths, add an rdma_restrack_sync() operation which is sort of like flush_workqueue() or synchronize_irq(): after it returns, all the old nldev touches to the mr are gone and everything sees the new PD. This makes it safe to reach into the PD pointer. | |||||
| CVE-2026-74268 | 2026-09-14 | N/A | 9.8 CRITICAL | ||
| In the Linux kernel, the following vulnerability has been resolved: tcp: clear sock_ops cb flags before force-closing a child socket A child socket inherits the listener's bpf_sock_ops_cb_flags via sk_clone_lock(). If its setup fails in tcp_v4_syn_recv_sock() / tcp_v6_syn_recv_sock(), the child is freed through put_and_exit, where inet_csk_prepare_forced_close() drops the socket lock and tcp_done() runs without it. If BPF_SOCK_OPS_STATE_CB_FLAG was inherited, tcp_done() -> tcp_set_state() calls tcp_call_bpf(), which expects the lock and trips sock_owned_by_me(): WARNING: include/net/sock.h:1799 at tcp_set_state+0x433/0x550 RIP: 0010:tcp_set_state+0x433/0x550 include/net/sock.h:1799 Call Trace: <IRQ> tcp_done+0xba/0x250 net/ipv4/tcp.c:5095 tcp_v4_syn_recv_sock+0x850/0xa50 net/ipv4/tcp_ipv4.c:1787 tcp_check_req+0xf30/0x1360 net/ipv4/tcp_minisocks.c:926 tcp_v4_rcv+0x1047/0x1b50 net/ipv4/tcp_ipv4.c:2164 </IRQ> The child is freed before it is ever established, so it should run no sock_ops callback. Clear its cb flags in inet_csk_prepare_for_destroy_sock(), the common point for the IPv4, IPv6 and chtls forced-close paths and for the MPTCP ->syn_recv_sock() failure path (dispose_child), which reaches tcp_done() on a child that was never established too. | |||||
| CVE-2026-72991 | 1 Microsoft | 12 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 9 more | 2026-09-14 | N/A | 7.8 HIGH |
| Heap-based buffer overflow in Windows Biometric Service allows an authorized attacker to elevate privileges locally. | |||||
| CVE-2026-72255 | 2026-09-14 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst The br_netfilter fake rtable is embedded in struct net_bridge and is attached to bridged packets with skb_dst_set_noref(). If such a packet is queued to NFQUEUE, __nf_queue() upgrades that fake dst with skb_dst_force(). At that point the queued skb can hold a real dst reference after bridge teardown has started. The problem is not that every bridged packet needs its own dst reference. The problem is that NFQUEUE can keep the bridge private fake dst alive after unregister begins. Fix this by keeping the bridge fake dst model unchanged and pinning the bridge master device only while the packet sits in NFQUEUE. Record the bridge device in nf_queue_entry when the queued skb carries a bridge fake dst, take a device reference for the queue lifetime, and drop it when the queue entry is freed. Also make sure queued entries are reaped when that bridge device goes down, and drop the redundant nf_bridge_info_exists() test from the fake dst detection. This keeps netdev_priv(br->dev) alive until verdict completion, so the embedded fake rtable and its metrics backing storage cannot be freed out from under dst_release(). It also avoids the constant refcount bump and avoids using ipv4-specific dst helpers for IPv6 bridge traffic. | |||||
| CVE-2026-64336 | 1 Linux | 1 Linux Kernel | 2026-09-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan_pda: fix information leak The write() callback is supposed to return the number of characters accepted or a negative errno. Since the addition of write fifo support the keyspan_pda implementation will however return the number characters submitted to the device if the write urb is not already in use. If this number is larger than the number of characters passed to write(), the line discipline continues writing data from beyond the tty write buffer. Fix the information leak by making sure that keyspan_pda_write_start() returns zero on success as intended. | |||||
| CVE-2026-64321 | 1 Linux | 1 Linux Kernel | 2026-09-14 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nvme: target: rdma: fix ndev refcount leak on queue connect nvmet_rdma_queue_connect() calls nvmet_rdma_find_get_device() which acquires a reference on the returned ndev via kref_get(). On the path where the host queue backlog is exceeded and the function returns NVME_SC_CONNECT_CTRL_BUSY, reference of ndev is not released, leaking the kref. Fix this by adding a goto to the existing put_device label before the early return. | |||||