Total
19304 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-31729 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: validate connector number in ucsi_notify_common() The connector number extracted from CCI via UCSI_CCI_CONNECTOR() is a 7-bit field (0-127) that is used to index into the connector array in ucsi_connector_change(). However, the array is only allocated for the number of connectors reported by the device (typically 2-4 entries). A malicious or malfunctioning device could report an out-of-range connector number in the CCI, causing an out-of-bounds array access in ucsi_connector_change(). Add a bounds check in ucsi_notify_common(), the central point where CCI is parsed after arriving from hardware, so that bogus connector numbers are rejected before they propagate further. | |||||
| CVE-2026-31728 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_ether: Fix race between gether_disconnect and eth_stop A race condition between gether_disconnect() and eth_stop() leads to a NULL pointer dereference. Specifically, if eth_stop() is triggered concurrently while gether_disconnect() is tearing down the endpoints, eth_stop() attempts to access the cleared endpoint descriptor, causing the following NPE: Unable to handle kernel NULL pointer dereference Call trace: __dwc3_gadget_ep_enable+0x60/0x788 dwc3_gadget_ep_enable+0x70/0xe4 usb_ep_enable+0x60/0x15c eth_stop+0xb8/0x108 Because eth_stop() crashes while holding the dev->lock, the thread running gether_disconnect() fails to acquire the same lock and spins forever, resulting in a hardlockup: Core - Debugging Information for Hardlockup core(7) Call trace: queued_spin_lock_slowpath+0x94/0x488 _raw_spin_lock+0x64/0x6c gether_disconnect+0x19c/0x1e8 ncm_set_alt+0x68/0x1a0 composite_setup+0x6a0/0xc50 The root cause is that the clearing of dev->port_usb in gether_disconnect() is delayed until the end of the function. Move the clearing of dev->port_usb to the very beginning of gether_disconnect() while holding dev->lock. This cuts off the link immediately, ensuring eth_stop() will see dev->port_usb as NULL and safely bail out. | |||||
| CVE-2026-31726 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: fix NULL pointer dereference during unbind race Commit b81ac4395bbe ("usb: gadget: uvc: allow for application to cleanly shutdown") introduced two stages of synchronization waits totaling 1500ms in uvc_function_unbind() to prevent several types of kernel panics. However, this timing-based approach is insufficient during power management (PM) transitions. When the PM subsystem starts freezing user space processes, the wait_event_interruptible_timeout() is aborted early, which allows the unbind thread to proceed and nullify the gadget pointer (cdev->gadget = NULL): [ 814.123447][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind() [ 814.178583][ T3173] PM: suspend entry (deep) [ 814.192487][ T3173] Freezing user space processes [ 814.197668][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind no clean disconnect, wait for release When the PM subsystem resumes or aborts the suspend and tasks are restarted, the V4L2 release path is executed and attempts to access the already nullified gadget pointer, triggering a kernel panic: [ 814.292597][ C0] PM: pm_system_irq_wakeup: 479 triggered dhdpcie_host_wake [ 814.386727][ T3173] Restarting tasks ... [ 814.403522][ T4558] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 [ 814.404021][ T4558] pc : usb_gadget_deactivate+0x14/0xf4 [ 814.404031][ T4558] lr : usb_function_deactivate+0x54/0x94 [ 814.404078][ T4558] Call trace: [ 814.404080][ T4558] usb_gadget_deactivate+0x14/0xf4 [ 814.404083][ T4558] usb_function_deactivate+0x54/0x94 [ 814.404087][ T4558] uvc_function_disconnect+0x1c/0x5c [ 814.404092][ T4558] uvc_v4l2_release+0x44/0xac [ 814.404095][ T4558] v4l2_release+0xcc/0x130 Address the race condition and NULL pointer dereference by: 1. State Synchronization (flag + mutex) Introduce a 'func_unbound' flag in struct uvc_device. This allows uvc_function_disconnect() to safely skip accessing the nullified cdev->gadget pointer. As suggested by Alan Stern, this flag is protected by a new mutex (uvc->lock) to ensure proper memory ordering and prevent instruction reordering or speculative loads. This mutex is also used to protect 'func_connected' for consistent state management. 2. Explicit Synchronization (completion) Use a completion to synchronize uvc_function_unbind() with the uvc_vdev_release() callback. This prevents Use-After-Free (UAF) by ensuring struct uvc_device is freed after all video device resources are released. | |||||
| CVE-2026-31725 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ecm: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the bound flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | |||||
| CVE-2026-31724 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_eem: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the bound flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | |||||
| CVE-2026-31723 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_subset: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the bound flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | |||||
| CVE-2026-31722 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Fix net_device lifecycle with device_move The net_device is allocated during function instance creation and registered during the bind phase with the gadget device as its sysfs parent. When the function unbinds, the parent device is destroyed, but the net_device survives, resulting in dangling sysfs symlinks: console:/ # ls -l /sys/class/net/usb0 lrwxrwxrwx ... /sys/class/net/usb0 -> /sys/devices/platform/.../gadget.0/net/usb0 console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0 ls: .../gadget.0/net/usb0: No such file or directory Use device_move() to reparent the net_device between the gadget device tree and /sys/devices/virtual across bind and unbind cycles. During the final unbind, calling device_move(NULL) moves the net_device to the virtual device tree before the gadget device is destroyed. On rebinding, device_move() reparents the device back under the new gadget, ensuring proper sysfs topology and power management ordering. To maintain compatibility with legacy composite drivers (e.g., multi.c), the borrowed_net flag is used to indicate whether the network device is shared and pre-registered during the legacy driver's bind phase. | |||||
| CVE-2026-31721 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_hid: move list and spinlock inits from bind to alloc There was an issue when you did the following: - setup and bind an hid gadget - open /dev/hidg0 - use the resulting fd in EPOLL_CTL_ADD - unbind the UDC - bind the UDC - use the fd in EPOLL_CTL_DEL When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported within remove_wait_queue (via ep_remove_wait_queue). After some debugging I found out that the queues, which f_hid registers via poll_wait were the problem. These were initialized using init_waitqueue_head inside hidg_bind. So effectively, the bind function re-initialized the queues while there were still items in them. The solution is to move the initialization from hidg_bind to hidg_alloc to extend their lifetimes to the lifetime of the function instance. Additionally, I found many other possibly problematic init calls in the bind function, which I moved as well. | |||||
| CVE-2026-31720 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: validate control request size f_audio_complete() copies req->length bytes into a 4-byte stack variable: u32 data = 0; memcpy(&data, req->buf, req->length); req->length is derived from the host-controlled USB request path, which can lead to a stack out-of-bounds write. Validate req->actual against the expected payload size for the supported control selectors and decode only the expected amount of data. This avoids copying a host-influenced length into a fixed-size stack object. | |||||
| CVE-2026-31719 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: krb5enc - fix async decrypt skipping hash verification krb5enc_dispatch_decrypt() sets req->base.complete as the skcipher callback, which is the caller's own completion handler. When the skcipher completes asynchronously, this signals "done" to the caller without executing krb5enc_dispatch_decrypt_hash(), completely bypassing the integrity verification (hash check). Compare with the encrypt path which correctly uses krb5enc_encrypt_done as an intermediate callback to chain into the hash computation on async completion. Fix by adding krb5enc_decrypt_done as an intermediate callback that chains into krb5enc_dispatch_decrypt_hash() upon async skcipher completion, matching the encrypt path's callback pattern. Also fix EBUSY/EINPROGRESS handling throughout: remove krb5enc_request_complete() which incorrectly swallowed EINPROGRESS notifications that must be passed up to callers waiting on backlogged requests, and add missing EBUSY checks in krb5enc_encrypt_ahash_done for the dispatch_encrypt return value. Unset MAY_BACKLOG on the async completion path so the user won't see back-to-back EINPROGRESS notifications. | |||||
| CVE-2026-31718 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in __ksmbd_close_fd() via durable scavenger When a durable file handle survives session disconnect (TCP close without SMB2_LOGOFF), session_fd_check() sets fp->conn = NULL to preserve the handle for later reconnection. However, it did not clean up the byte-range locks on fp->lock_list. Later, when the durable scavenger thread times out and calls __ksmbd_close_fd(NULL, fp), the lock cleanup loop did: spin_lock(&fp->conn->llist_lock); This caused a slab use-after-free because fp->conn was NULL and the original connection object had already been freed by ksmbd_tcp_disconnect(). The root cause is asymmetric cleanup: lock entries (smb_lock->clist) were left dangling on the freed conn->lock_list while fp->conn was nulled out. To fix this issue properly, we need to handle the lifetime of smb_lock->clist across three paths: - Safely skip clist deletion when list is empty and fp->conn is NULL. - Remove the lock from the old connection's lock_list in session_fd_check() - Re-add the lock to the new connection's lock_list in ksmbd_reopen_durable_fd(). | |||||
| CVE-2026-31717 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate owner of durable handle on reconnect Currently, ksmbd does not verify if the user attempting to reconnect to a durable handle is the same user who originally opened the file. This allows any authenticated user to hijack an orphaned durable handle by predicting or brute-forcing the persistent ID. According to MS-SMB2, the server MUST verify that the SecurityContext of the reconnect request matches the SecurityContext associated with the existing open. Add a durable_owner structure to ksmbd_file to store the original opener's UID, GID, and account name. and catpure the owner information when a file handle becomes orphaned. and implementing ksmbd_vfs_compare_durable_owner() to validate the identity of the requester during SMB2_CREATE (DHnC). | |||||
| CVE-2026-31716 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: validate rec->used in journal-replay file record check check_file_record() validates rec->total against the record size but never validates rec->used. The do_action() journal-replay handlers read rec->used from disk and use it to compute memmove lengths: DeleteAttribute: memmove(attr, ..., used - asize - roff) CreateAttribute: memmove(..., attr, used - roff) change_attr_size: memmove(..., used - PtrOffset(rec, next)) When rec->used is smaller than the offset of a validated attribute, or larger than the record size, these subtractions can underflow allowing us to copy huge amounts of memory in to a 4kb buffer, generally considered a bad idea overall. This requires a corrupted filesystem, which isn't a threat model the kernel really needs to worry about, but checking for such an obvious out-of-bounds value is good to keep things robust, especially on journal replay Fix this up by bounding rec->used correctly. This is much like commit b2bc7c44ed17 ("fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot") which checked different values in this same switch statement. | |||||
| CVE-2026-31714 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid memory leak in f2fs_rename() syzbot reported a f2fs bug as below: BUG: memory leak unreferenced object 0xffff888127f70830 (size 16): comm "syz.0.23", pid 6144, jiffies 4294943712 hex dump (first 16 bytes): 3c af 57 72 5b e6 8f ad 6e 8e fd 33 42 39 03 ff <.Wr[...n..3B9.. backtrace (crc 925f8a80): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4520 [inline] slab_alloc_node mm/slub.c:4844 [inline] __do_kmalloc_node mm/slub.c:5237 [inline] __kmalloc_noprof+0x3bd/0x560 mm/slub.c:5250 kmalloc_noprof include/linux/slab.h:954 [inline] fscrypt_setup_filename+0x15e/0x3b0 fs/crypto/fname.c:364 f2fs_setup_filename+0x52/0xb0 fs/f2fs/dir.c:143 f2fs_rename+0x159/0xca0 fs/f2fs/namei.c:961 f2fs_rename2+0xd5/0xf20 fs/f2fs/namei.c:1308 vfs_rename+0x7ff/0x1250 fs/namei.c:6026 filename_renameat2+0x4f4/0x660 fs/namei.c:6144 __do_sys_renameat2 fs/namei.c:6173 [inline] __se_sys_renameat2 fs/namei.c:6168 [inline] __x64_sys_renameat2+0x59/0x80 fs/namei.c:6168 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is in commit 40b2d55e0452 ("f2fs: fix to create selinux label during whiteout initialization"), we added a call to f2fs_setup_filename() without a matching call to f2fs_free_filename(), fix it. | |||||
| CVE-2026-31713 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fuse: abort on fatal signal during sync init When sync init is used and the server exits for some reason (error, crash) while processing FUSE_INIT, the filesystem creation will hang. The reason is that while all other threads will exit, the mounting thread (or process) will keep the device fd open, which will prevent an abort from happening. This is a regression from the async mount case, where the mount was done first, and the FUSE_INIT processing afterwards, in which case there's no such recursive syscall keeping the fd open. | |||||
| CVE-2026-31707 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate response sizes in ipc_validate_msg() ipc_validate_msg() computes the expected message size for each response type by adding (or multiplying) attacker-controlled fields from the daemon response to a fixed struct size in unsigned int arithmetic. Three cases can overflow: KSMBD_EVENT_RPC_REQUEST: msg_sz = sizeof(struct ksmbd_rpc_command) + resp->payload_sz; KSMBD_EVENT_SHARE_CONFIG_REQUEST: msg_sz = sizeof(struct ksmbd_share_config_response) + resp->payload_sz; KSMBD_EVENT_LOGIN_REQUEST_EXT: msg_sz = sizeof(struct ksmbd_login_response_ext) + resp->ngroups * sizeof(gid_t); resp->payload_sz is __u32 and resp->ngroups is __s32. Each addition can wrap in unsigned int; the multiplication by sizeof(gid_t) mixes signed and size_t, so a negative ngroups is converted to SIZE_MAX before the multiply. A wrapped value of msg_sz that happens to equal entry->msg_sz bypasses the size check on the next line, and downstream consumers (smb2pdu.c:6742 memcpy using rpc_resp->payload_sz, kmemdup in ksmbd_alloc_user using resp_ext->ngroups) then trust the unverified length. Use check_add_overflow() on the RPC_REQUEST and SHARE_CONFIG_REQUEST paths to detect integer overflow without constraining functional payload size; userspace ksmbd-tools grows NDR responses in 4096-byte chunks for calls like NetShareEnumAll, so a hard transport cap is unworkable on the response side. For LOGIN_REQUEST_EXT, reject resp->ngroups outside the signed [0, NGROUPS_MAX] range up front and report the error from ipc_validate_msg() so it fires at the IPC boundary; with that bound the subsequent multiplication and addition stay well below UINT_MAX. The now-redundant ngroups check and pr_err in ksmbd_alloc_user() are removed. This is the response-side analogue of aab98e2dbd64 ("ksmbd: fix integer overflows on 32 bit systems"), which hardened the request side. | |||||
| CVE-2026-31706 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate num_aces and harden ACE walk in smb_inherit_dacl() smb_inherit_dacl() trusts the on-disk num_aces value from the parent directory's DACL xattr and uses it to size a heap allocation: aces_base = kmalloc(sizeof(struct smb_ace) * num_aces * 2, ...); num_aces is a u16 read from le16_to_cpu(parent_pdacl->num_aces) without checking that it is consistent with the declared pdacl_size. An authenticated client whose parent directory's security.NTACL is tampered (e.g. via offline xattr corruption or a concurrent path that bypasses parse_dacl()) can present num_aces = 65535 with minimal actual ACE data. This causes a ~8 MB allocation (not kzalloc, so uninitialized) that the subsequent loop only partially populates, and may also overflow the three-way size_t multiply on 32-bit kernels. Additionally, the ACE walk loop uses the weaker offsetof(struct smb_ace, access_req) minimum size check rather than the minimum valid on-wire ACE size, and does not reject ACEs whose declared size is below the minimum. Reproduced on UML + KASAN + LOCKDEP against the real ksmbd code path. A legitimate mount.cifs client creates a parent directory over SMB (ksmbd writes a valid security.NTACL xattr), then the NTACL blob on the backing filesystem is rewritten to set num_aces = 0xFFFF while keeping the posix_acl_hash bytes intact so ksmbd_vfs_get_sd_xattr()'s hash check still passes. A subsequent SMB2 CREATE of a child under that parent drives smb2_open() into smb_inherit_dacl() (share has "vfs objects = acl_xattr" set), which fails the page allocator: WARNING: mm/page_alloc.c:5226 at __alloc_frozen_pages_noprof+0x46c/0x9c0 Workqueue: ksmbd-io handle_ksmbd_work __alloc_frozen_pages_noprof+0x46c/0x9c0 ___kmalloc_large_node+0x68/0x130 __kmalloc_large_node_noprof+0x24/0x70 __kmalloc_noprof+0x4c9/0x690 smb_inherit_dacl+0x394/0x2430 smb2_open+0x595d/0xabe0 handle_ksmbd_work+0x3d3/0x1140 With the patch applied the added guard rejects the tampered value with -EINVAL before any large allocation runs, smb2_open() falls back to smb2_create_sd_buffer(), and the child is created with a default SD. No warning, no splat. Fix by: 1. Validating num_aces against pdacl_size using the same formula applied in parse_dacl(). 2. Replacing the raw kmalloc(sizeof * num_aces * 2) with kmalloc_array(num_aces * 2, sizeof(...)) for overflow-safe allocation. 3. Tightening the per-ACE loop guard to require the minimum valid ACE size (offsetof(smb_ace, sid) + CIFS_SID_BASE_SIZE) and rejecting under-sized ACEs, matching the hardening in smb_check_perm_dacl() and parse_dacl(). v1 -> v2: - Replace the synthetic test-module splat in the changelog with a real-path UML + KASAN reproduction driven through mount.cifs and SMB2 CREATE; Namjae flagged the kcifs3_test_inherit_dacl_old name in v1 since it does not exist in ksmbd. - Drop the commit-hash citation from the code comment per Namjae's review; keep the parse_dacl() pointer. | |||||
| CVE-2026-31705 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out-of-bounds write in smb2_get_ea() EA alignment smb2_get_ea() applies 4-byte alignment padding via memset() after writing each EA entry. The bounds check on buf_free_len is performed before the value memcpy, but the alignment memset fires unconditionally afterward with no check on remaining space. When the EA value exactly fills the remaining buffer (buf_free_len == 0 after value subtraction), the alignment memset writes 1-3 NUL bytes past the buf_free_len boundary. In compound requests where the response buffer is shared across commands, the first command (e.g., READ) can consume most of the buffer, leaving a tight remainder for the QUERY_INFO EA response. The alignment memset then overwrites past the physical kvmalloc allocation into adjacent kernel heap memory. Add a bounds check before the alignment memset to ensure buf_free_len can accommodate the padding bytes. This is the same bug pattern fixed by commit beef2634f81f ("ksmbd: fix potencial OOB in get_file_all_info() for compound requests") and commit fda9522ed6af ("ksmbd: fix OOB write in QUERY_INFO for compound requests"), both of which added bounds checks before unconditional writes in QUERY_INFO response handlers. | |||||
| CVE-2026-31704 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: use check_add_overflow() to prevent u16 DACL size overflow set_posix_acl_entries_dacl() and set_ntacl_dacl() accumulate ACE sizes in u16 variables. When a file has many POSIX ACL entries, the accumulated size can wrap past 65535, causing the pointer arithmetic (char *)pndace + *size to land within already-written ACEs. Subsequent writes then overwrite earlier entries, and pndacl->size gets a truncated value. Use check_add_overflow() at each accumulation point to detect the wrap before it corrupts the buffer, consistent with existing check_mul_overflow() usage elsewhere in smbacl.c. | |||||
| CVE-2026-31702 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix use-after-free of sbi in f2fs_compress_write_end_io() In f2fs_compress_write_end_io(), dec_page_count(sbi, type) can bring the F2FS_WB_CP_DATA counter to zero, unblocking f2fs_wait_on_all_pages() in f2fs_put_super() on a concurrent unmount CPU. The unmount path then proceeds to call f2fs_destroy_page_array_cache(sbi), which destroys sbi->page_array_slab via kmem_cache_destroy(), and eventually kfree(sbi). Meanwhile, the bio completion callback is still executing: when it reaches page_array_free(sbi, ...), it dereferences sbi->page_array_slab — a destroyed slab cache — to call kmem_cache_free(), causing a use-after-free. This is the same class of bug as CVE-2026-23234 (which fixed the equivalent race in f2fs_write_end_io() in data.c), but in the compressed writeback completion path that was not covered by that fix. Fix this by moving dec_page_count() to after page_array_free(), so that all sbi accesses complete before the counter decrement that can unblock unmount. For non-last folios (where atomic_dec_return on cic->pending_pages is nonzero), dec_page_count is called immediately before returning — page_array_free is not reached on this path, so there is no post-decrement sbi access. For the last folio, page_array_free runs while the F2FS_WB_CP_DATA counter is still nonzero (this folio has not yet decremented it), keeping sbi alive, and dec_page_count runs as the final operation. | |||||