Filtered by vendor Linux
Subscribe
Total
19344 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-43082 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: txgbe: leave space for null terminators on property_entry Lists of struct property_entry are supposed to be terminated with an empty property, this driver currently seems to be allocating exactly the amount of entry used. Change the struct definition to leave an extra element for all property_entry. | |||||
| CVE-2026-43081 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: ipa: fix GENERIC_CMD register field masks for IPA v5.0+ Fix the field masks to match the hardware layout documented in downstream GSI (GSI_V3_0_EE_n_GSI_EE_GENERIC_CMD_*). Notably this fixes a WARN I was seeing when I tried to send "stop" to the MPSS remoteproc while IPA was up. | |||||
| CVE-2026-43080 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: l2tp: Drop large packets with UDP encap syzbot reported a WARN on my patch series [1]. The actual issue is an overflow of 16-bit UDP length field, and it exists in the upstream code. My series added a debug WARN with an overflow check that exposed the issue, that's why syzbot tripped on my patches, rather than on upstream code. syzbot's repro: r0 = socket$pppl2tp(0x18, 0x1, 0x1) r1 = socket$inet6_udp(0xa, 0x2, 0x0) connect$inet6(r1, &(0x7f00000000c0)={0xa, 0x0, 0x0, @loopback, 0xfffffffc}, 0x1c) connect$pppl2tp(r0, &(0x7f0000000240)=@pppol2tpin6={0x18, 0x1, {0x0, r1, 0x4, 0x0, 0x0, 0x0, {0xa, 0x4e22, 0xffff, @ipv4={'\x00', '\xff\xff', @empty}}}}, 0x32) writev(r0, &(0x7f0000000080)=[{&(0x7f0000000000)="ee", 0x34000}], 0x1) It basically sends an oversized (0x34000 bytes) PPPoL2TP packet with UDP encapsulation, and l2tp_xmit_core doesn't check for overflows when it assigns the UDP length field. The value gets trimmed to 16 bites. Add an overflow check that drops oversized packets and avoids sending packets with trimmed UDP length to the wire. syzbot's stack trace (with my patch applied): len >= 65536u WARNING: ./include/linux/udp.h:38 at udp_set_len_short include/linux/udp.h:38 [inline], CPU#1: syz.0.17/5957 WARNING: ./include/linux/udp.h:38 at l2tp_xmit_core net/l2tp/l2tp_core.c:1293 [inline], CPU#1: syz.0.17/5957 WARNING: ./include/linux/udp.h:38 at l2tp_xmit_skb+0x1204/0x18d0 net/l2tp/l2tp_core.c:1327, CPU#1: syz.0.17/5957 Modules linked in: CPU: 1 UID: 0 PID: 5957 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 RIP: 0010:udp_set_len_short include/linux/udp.h:38 [inline] RIP: 0010:l2tp_xmit_core net/l2tp/l2tp_core.c:1293 [inline] RIP: 0010:l2tp_xmit_skb+0x1204/0x18d0 net/l2tp/l2tp_core.c:1327 Code: 0f 0b 90 e9 21 f9 ff ff e8 e9 05 ec f6 90 0f 0b 90 e9 8d f9 ff ff e8 db 05 ec f6 90 0f 0b 90 e9 cc f9 ff ff e8 cd 05 ec f6 90 <0f> 0b 90 e9 de fa ff ff 44 89 f1 80 e1 07 80 c1 03 38 c1 0f 8c 4f RSP: 0018:ffffc90003d67878 EFLAGS: 00010293 RAX: ffffffff8ad985e3 RBX: ffff8881a6400090 RCX: ffff8881697f0000 RDX: 0000000000000000 RSI: 0000000000034010 RDI: 000000000000ffff RBP: dffffc0000000000 R08: 0000000000000003 R09: 0000000000000004 R10: dffffc0000000000 R11: fffff520007acf00 R12: ffff8881baf20900 R13: 0000000000034010 R14: ffff8881a640008e R15: ffff8881760f7000 FS: 000055557e81f500(0000) GS:ffff8882a9467000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000200000033000 CR3: 00000001612f4000 CR4: 00000000000006f0 Call Trace: <TASK> pppol2tp_sendmsg+0x40a/0x5f0 net/l2tp/l2tp_ppp.c:302 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] sock_write_iter+0x503/0x550 net/socket.c:1195 do_iter_readv_writev+0x619/0x8c0 fs/read_write.c:-1 vfs_writev+0x33c/0x990 fs/read_write.c:1059 do_writev+0x154/0x2e0 fs/read_write.c:1105 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f636479c629 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffffd4241c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00007f6364a15fa0 RCX: 00007f636479c629 RDX: 0000000000000001 RSI: 0000200000000080 RDI: 0000000000000003 RBP: 00007f6364832b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f6364a15fac R14: 00007f6364a15fa0 R15: 00007f6364a15fa0 </TASK> [1]: https://lore.kernel.org/all/20260226201600.222044-1-alice.kernel@fastmail.im/ | |||||
| CVE-2026-43079 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/uncore: Skip discovery table for offline dies This warning can be triggered if NUMA is disabled and the system boots with fewer CPUs than the number of CPUs in die 0. WARNING: CPU: 9 PID: 7257 at uncore.c:1157 uncore_pci_pmu_register+0x136/0x160 [intel_uncore] Currently, the discovery table continues to be parsed even if all CPUs in the associated die are offline. This can lead to an array overflow at "pmu->boxes[die] = box" in uncore_pci_pmu_register(), which may trigger the warning above or cause other issues. | |||||
| CVE-2026-43078 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Fix page reassignment overflow in af_alg_pull_tsgl When page reassignment was added to af_alg_pull_tsgl the original loop wasn't updated so it may try to reassign one more page than necessary. Add the check to the reassignment so that this does not happen. Also update the comment which still refers to the obsolete offset argument. | |||||
| CVE-2026-43077 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: algif_aead - Fix minimum RX size check for decryption The check for the minimum receive buffer size did not take the tag size into account during decryption. Fix this by adding the required extra length. | |||||
| CVE-2026-43076 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline data i_size during inode read When reading an inode from disk, ocfs2_validate_inode_block() performs various sanity checks but does not validate the size of inline data. If the filesystem is corrupted, an inode's i_size can exceed the actual inline data capacity (id_count). This causes ocfs2_dir_foreach_blk_id() to iterate beyond the inline data buffer, triggering a use-after-free when accessing directory entries from freed memory. In the syzbot report: - i_size was 1099511627576 bytes (~1TB) - Actual inline data capacity (id_count) is typically <256 bytes - A garbage rec_len (54648) caused ctx->pos to jump out of bounds - This triggered a UAF in ocfs2_check_dir_entry() Fix by adding a validation check in ocfs2_validate_inode_block() to ensure inodes with inline data have i_size <= id_count. This catches the corruption early during inode read and prevents all downstream code from operating on invalid data. | |||||
| CVE-2026-43075 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix out-of-bounds write in ocfs2_write_end_inline KASAN reports a use-after-free write of 4086 bytes in ocfs2_write_end_inline, called from ocfs2_write_end_nolock during a copy_file_range splice fallback on a corrupted ocfs2 filesystem mounted on a loop device. The actual bug is an out-of-bounds write past the inode block buffer, not a true use-after-free. The write overflows into an adjacent freed page, which KASAN reports as UAF. The root cause is that ocfs2_try_to_write_inline_data trusts the on-disk id_count field to determine whether a write fits in inline data. On a corrupted filesystem, id_count can exceed the physical maximum inline data capacity, causing writes to overflow the inode block buffer. Call trace (crash path): vfs_copy_file_range (fs/read_write.c:1634) do_splice_direct splice_direct_to_actor iter_file_splice_write ocfs2_file_write_iter generic_perform_write ocfs2_write_end ocfs2_write_end_nolock (fs/ocfs2/aops.c:1949) ocfs2_write_end_inline (fs/ocfs2/aops.c:1915) memcpy_from_folio <-- KASAN: write OOB So add id_count upper bound check in ocfs2_validate_inode_block() to alongside the existing i_size check to fix it. | |||||
| CVE-2026-43074 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: eventpoll: defer struct eventpoll free to RCU grace period In certain situations, ep_free() in eventpoll.c will kfree the epi->ep eventpoll struct while it still being used by another concurrent thread. Defer the kfree() to an RCU callback to prevent UAF. | |||||
| CVE-2026-43073 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86-64: rename misleadingly named '__copy_user_nocache()' function This function was a masterclass in bad naming, for various historical reasons. It claimed to be a non-cached user copy. It is literally _neither_ of those things. It's a specialty memory copy routine that uses non-temporal stores for the destination (but not the source), and that does exception handling for both source and destination accesses. Also note that while it works for unaligned targets, any unaligned parts (whether at beginning or end) will not use non-temporal stores, since only words and quadwords can be non-temporal on x86. The exception handling means that it _can_ be used for user space accesses, but not on its own - it needs all the normal "start user space access" logic around it. But typically the user space access would be the source, not the non-temporal destination. That was the original intention of this, where the destination was some fragile persistent memory target that needed non-temporal stores in order to catch machine check exceptions synchronously and deal with them gracefully. Thus that non-descriptive name: one use case was to copy from user space into a non-cached kernel buffer. However, the existing users are a mix of that intended use-case, and a couple of random drivers that just did this as a performance tweak. Some of those random drivers then actively misused the user copying version (with STAC/CLAC and all) to do kernel copies without ever even caring about the exception handling, _just_ for the non-temporal destination. Rename it as a first small step to actually make it halfway sane, and change the prototype to be more normal: it doesn't take a user pointer unless the caller has done the proper conversion, and the argument size is the full size_t (it still won't actually copy more than 4GB in one go, but there's also no reason to silently truncate the size argument in the caller). Finally, use this now sanely named function in the NTB code, which mis-used a user copy version (with STAC/CLAC and all) of this interface despite it not actually being a user copy at all. | |||||
| CVE-2026-43072 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: platform_get_irq_byname() returns an int platform_get_irq_byname() will return a negative value if an error happens, so it should be checked and not just passed directly into devm_request_threaded_irq() hoping all will be ok. | |||||
| CVE-2026-43070 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reset register ID for BPF_END value tracking When a register undergoes a BPF_END (byte swap) operation, its scalar value is mutated in-place. If this register previously shared a scalar ID with another register (e.g., after an `r1 = r0` assignment), this tie must be broken. Currently, the verifier misses resetting `dst_reg->id` to 0 for BPF_END. Consequently, if a conditional jump checks the swapped register, the verifier incorrectly propagates the learned bounds to the linked register, leading to false confidence in the linked register's value and potentially allowing out-of-bounds memory accesses. Fix this by explicitly resetting `dst_reg->id` to 0 in the BPF_END case to break the scalar tie, similar to how BPF_NEG handles it via `__mark_reg_known`. | |||||
| CVE-2026-43069 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_ll: Fix firmware leak on error path Smatch reports: drivers/bluetooth/hci_ll.c:587 download_firmware() warn: 'fw' from request_firmware() not released on lines: 544. In download_firmware(), if request_firmware() succeeds but the returned firmware content is invalid (no data or zero size), the function returns without releasing the firmware, resulting in a resource leak. Fix this by calling release_firmware() before returning when request_firmware() succeeded but the firmware content is invalid. | |||||
| CVE-2026-43068 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal() There's issue as follows: ... EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2243 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 2239 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): error count since last fsck: 1 EXT4-fs (mmcblk0p1): initial error at time 1765597433: ext4_mb_generate_buddy:760 EXT4-fs (mmcblk0p1): last error at time 1765597433: ext4_mb_generate_buddy:760 ... According to the log analysis, blocks are always requested from the corrupted block group. This may happen as follows: ext4_mb_find_by_goal ext4_mb_load_buddy ext4_mb_load_buddy_gfp ext4_mb_init_cache ext4_read_block_bitmap_nowait ext4_wait_block_bitmap ext4_validate_block_bitmap if (!grp || EXT4_MB_GRP_BBITMAP_CORRUPT(grp)) return -EFSCORRUPTED; // There's no logs. if (err) return err; // Will return error ext4_lock_group(ac->ac_sb, group); if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) // Unreachable goto out; After commit 9008a58e5dce ("ext4: make the bitmap read routines return real error codes") merged, Commit 163a203ddb36 ("ext4: mark block group as corrupt on block bitmap error") is no real solution for allocating blocks from corrupted block groups. This is because if 'EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)' is true, then 'ext4_mb_load_buddy()' may return an error. This means that the block allocation will fail. Therefore, check block group if corrupted when ext4_mb_load_buddy() returns error. | |||||
| CVE-2026-43067 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: ext4: handle wraparound when searching for blocks for indirect mapped blocks Commit 4865c768b563 ("ext4: always allocate blocks only from groups inode can use") restricts what blocks will be allocated for indirect block based files to block numbers that fit within 32-bit block numbers. However, when using a review bot running on the latest Gemini LLM to check this commit when backporting into an LTS based kernel, it raised this concern: If ac->ac_g_ex.fe_group is >= ngroups (for instance, if the goal group was populated via stream allocation from s_mb_last_groups), then start will be >= ngroups. Does this allow allocating blocks beyond the 32-bit limit for indirect block mapped files? The commit message mentions that ext4_mb_scan_groups_linear() takes care to not select unsupported groups. However, its loop uses group = *start, and the very first iteration will call ext4_mb_scan_group() with this unsupported group because next_linear_group() is only called at the end of the iteration. After reviewing the code paths involved and considering the LLM review, I determined that this can happen when there is a file system where some files/directories are extent-mapped and others are indirect-block mapped. To address this, add a safety clamp in ext4_mb_scan_groups(). | |||||
| CVE-2026-43066 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths During code review, Joseph found that ext4_fc_replay_inode() calls ext4_get_fc_inode_loc() to get the inode location, which holds a reference to iloc.bh that must be released via brelse(). However, several error paths jump to the 'out' label without releasing iloc.bh: - ext4_handle_dirty_metadata() failure - sync_dirty_buffer() failure - ext4_mark_inode_used() failure - ext4_iget() failure Fix this by introducing an 'out_brelse' label placed just before the existing 'out' label to ensure iloc.bh is always released. Additionally, make ext4_fc_replay_inode() propagate errors properly instead of always returning 0. | |||||
| CVE-2026-43065 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: always drain queued discard work in ext4_mb_release() While reviewing recent ext4 patch[1], Sashiko raised the following concern[2]: > If the filesystem is initially mounted with the discard option, > deleting files will populate sbi->s_discard_list and queue > s_discard_work. If it is then remounted with nodiscard, the > EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is > neither cancelled nor flushed. [1] https://lore.kernel.org/r/20260319094545.19291-1-qiang.zhang@linux.dev/ [2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.dev The concern was valid, but it had nothing to do with the patch[1]. One of the problems with Sashiko in its current (early) form is that it will detect pre-existing issues and report it as a problem with the patch that it is reviewing. In practice, it would be hard to hit deliberately (unless you are a malicious syzkaller fuzzer), since it would involve mounting the file system with -o discard, and then deleting a large number of files, remounting the file system with -o nodiscard, and then immediately unmounting the file system before the queued discard work has a change to drain on its own. Fix it because it's a real bug, and to avoid Sashiko from raising this concern when analyzing future patches to mballoc.c. | |||||
| CVE-2026-43063 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't irele after failing to iget in xfs_attri_recover_work xlog_recovery_iget* never set @ip to a valid pointer if they return an error, so this irele will walk off a dangling pointer. Fix that. | |||||
| CVE-2026-43062 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix type confusion in l2cap_ecred_reconf_rsp() l2cap_ecred_reconf_rsp() casts the incoming data to struct l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes with result at offset 0). This causes two problems: - The sizeof(*rsp) length check requires 8 bytes instead of the correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected with -EPROTO. - rsp->result reads from offset 6 instead of offset 0, returning wrong data when the packet is large enough to pass the check. Fix by using the correct type. Also pass the already byte-swapped result variable to BT_DBG instead of the raw __le16 field. | |||||
| CVE-2026-43061 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix TX deadlock when using DMA `dmaengine_terminate_async` does not guarantee that the `__dma_tx_complete` callback will run. The callback is currently the only place where `dma->tx_running` gets cleared. If the transaction is canceled and the callback never runs, then `dma->tx_running` will never get cleared and we will never schedule new TX DMA transactions again. This change makes it so we clear `dma->tx_running` after we terminate the DMA transaction. This is "safe" because `serial8250_tx_dma_flush` is holding the UART port lock. The first thing the callback does is also grab the UART port lock, so access to `dma->tx_running` is serialized. | |||||