Filtered by vendor Linux
Subscribe
Total
19806 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-39774 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: rzg2l_adc: Set driver data before enabling runtime PM When stress-testing the system by repeatedly unbinding and binding the ADC device in a loop, and the ADC is a supplier for another device (e.g., a thermal hardware block that reads temperature through the ADC), it may happen that the ADC device is runtime-resumed immediately after runtime PM is enabled, triggered by its consumer. At this point, since drvdata is not yet set and the driver's runtime PM callbacks rely on it, a crash can occur. To avoid this, set drvdata just after it was allocated. | |||||
| CVE-2025-39946 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: tls: make sure to abort the stream if headers are bogus Normally we wait for the socket to buffer up the whole record before we service it. If the socket has a tiny buffer, however, we read out the data sooner, to prevent connection stalls. Make sure that we abort the connection when we find out late that the record is actually invalid. Retrying the parsing is fine in itself but since we copy some more data each time before we parse we can overflow the allocated skb space. Constructing a scenario in which we're under pressure without enough data in the socket to parse the length upfront is quite hard. syzbot figured out a way to do this by serving us the header in small OOB sends, and then filling in the recvbuf with a large normal send. Make sure that tls_rx_msg_size() aborts strp, if we reach an invalid record there's really no way to recover. | |||||
| CVE-2025-38713 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix slab-out-of-bounds read in hfsplus_uni2asc() The hfsplus_readdir() method is capable to crash by calling hfsplus_uni2asc(): [ 667.121659][ T9805] ================================================================== [ 667.122651][ T9805] BUG: KASAN: slab-out-of-bounds in hfsplus_uni2asc+0x902/0xa10 [ 667.123627][ T9805] Read of size 2 at addr ffff88802592f40c by task repro/9805 [ 667.124578][ T9805] [ 667.124876][ T9805] CPU: 3 UID: 0 PID: 9805 Comm: repro Not tainted 6.16.0-rc3 #1 PREEMPT(full) [ 667.124886][ T9805] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 667.124890][ T9805] Call Trace: [ 667.124893][ T9805] <TASK> [ 667.124896][ T9805] dump_stack_lvl+0x10e/0x1f0 [ 667.124911][ T9805] print_report+0xd0/0x660 [ 667.124920][ T9805] ? __virt_addr_valid+0x81/0x610 [ 667.124928][ T9805] ? __phys_addr+0xe8/0x180 [ 667.124934][ T9805] ? hfsplus_uni2asc+0x902/0xa10 [ 667.124942][ T9805] kasan_report+0xc6/0x100 [ 667.124950][ T9805] ? hfsplus_uni2asc+0x902/0xa10 [ 667.124959][ T9805] hfsplus_uni2asc+0x902/0xa10 [ 667.124966][ T9805] ? hfsplus_bnode_read+0x14b/0x360 [ 667.124974][ T9805] hfsplus_readdir+0x845/0xfc0 [ 667.124984][ T9805] ? __pfx_hfsplus_readdir+0x10/0x10 [ 667.124994][ T9805] ? stack_trace_save+0x8e/0xc0 [ 667.125008][ T9805] ? iterate_dir+0x18b/0xb20 [ 667.125015][ T9805] ? trace_lock_acquire+0x85/0xd0 [ 667.125022][ T9805] ? lock_acquire+0x30/0x80 [ 667.125029][ T9805] ? iterate_dir+0x18b/0xb20 [ 667.125037][ T9805] ? down_read_killable+0x1ed/0x4c0 [ 667.125044][ T9805] ? putname+0x154/0x1a0 [ 667.125051][ T9805] ? __pfx_down_read_killable+0x10/0x10 [ 667.125058][ T9805] ? apparmor_file_permission+0x239/0x3e0 [ 667.125069][ T9805] iterate_dir+0x296/0xb20 [ 667.125076][ T9805] __x64_sys_getdents64+0x13c/0x2c0 [ 667.125084][ T9805] ? __pfx___x64_sys_getdents64+0x10/0x10 [ 667.125091][ T9805] ? __x64_sys_openat+0x141/0x200 [ 667.125126][ T9805] ? __pfx_filldir64+0x10/0x10 [ 667.125134][ T9805] ? do_user_addr_fault+0x7fe/0x12f0 [ 667.125143][ T9805] do_syscall_64+0xc9/0x480 [ 667.125151][ T9805] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 667.125158][ T9805] RIP: 0033:0x7fa8753b2fc9 [ 667.125164][ T9805] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 48 [ 667.125172][ T9805] RSP: 002b:00007ffe96f8e0f8 EFLAGS: 00000217 ORIG_RAX: 00000000000000d9 [ 667.125181][ T9805] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa8753b2fc9 [ 667.125185][ T9805] RDX: 0000000000000400 RSI: 00002000000063c0 RDI: 0000000000000004 [ 667.125190][ T9805] RBP: 00007ffe96f8e110 R08: 00007ffe96f8e110 R09: 00007ffe96f8e110 [ 667.125195][ T9805] R10: 0000000000000000 R11: 0000000000000217 R12: 0000556b1e3b4260 [ 667.125199][ T9805] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 667.125207][ T9805] </TASK> [ 667.125210][ T9805] [ 667.145632][ T9805] Allocated by task 9805: [ 667.145991][ T9805] kasan_save_stack+0x20/0x40 [ 667.146352][ T9805] kasan_save_track+0x14/0x30 [ 667.146717][ T9805] __kasan_kmalloc+0xaa/0xb0 [ 667.147065][ T9805] __kmalloc_noprof+0x205/0x550 [ 667.147448][ T9805] hfsplus_find_init+0x95/0x1f0 [ 667.147813][ T9805] hfsplus_readdir+0x220/0xfc0 [ 667.148174][ T9805] iterate_dir+0x296/0xb20 [ 667.148549][ T9805] __x64_sys_getdents64+0x13c/0x2c0 [ 667.148937][ T9805] do_syscall_64+0xc9/0x480 [ 667.149291][ T9805] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 667.149809][ T9805] [ 667.150030][ T9805] The buggy address belongs to the object at ffff88802592f000 [ 667.150030][ T9805] which belongs to the cache kmalloc-2k of size 2048 [ 667.151282][ T9805] The buggy address is located 0 bytes to the right of [ 667.151282][ T9805] allocated 1036-byte region [ffff88802592f000, ffff88802592f40c) [ 667.1 ---truncated--- | |||||
| CVE-2025-38702 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: fix potential buffer overflow in do_register_framebuffer() The current implementation may lead to buffer overflow when: 1. Unregistration creates NULL gaps in registered_fb[] 2. All array slots become occupied despite num_registered_fb < FB_MAX 3. The registration loop exceeds array bounds Add boundary check to prevent registered_fb[FB_MAX] access. | |||||
| CVE-2025-39856 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: am65-cpsw-nuss: Fix null pointer dereference for ndev In the TX completion packet stage of TI SoCs with CPSW2G instance, which has single external ethernet port, ndev is accessed without being initialized if no TX packets have been processed. It results into null pointer dereference, causing kernel to crash. Fix this by having a check on the number of TX packets which have been processed. | |||||
| CVE-2025-39739 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-qcom: Add SM6115 MDSS compatible Add the SM6115 MDSS compatible to clients compatible list, as it also needs that workaround. Without this workaround, for example, QRB4210 RB2 which is based on SM4250/SM6115 generates a lot of smmu unhandled context faults during boot: arm_smmu_context_fault: 116854 callbacks suppressed arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402, iova=0x5c0ec600, fsynr=0x320021, cbfrsynra=0x420, cb=5 arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420 arm-smmu c600000.iommu: FSYNR0 = 00320021 [S1CBNDX=50 PNU PLVL=1] arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402, iova=0x5c0d7800, fsynr=0x320021, cbfrsynra=0x420, cb=5 arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420 and also failed initialisation of lontium lt9611uxc, gpu and dpu is observed: (binding MDSS components triggered by lt9611uxc have failed) ------------[ cut here ]------------ !aspace WARNING: CPU: 6 PID: 324 at drivers/gpu/drm/msm/msm_gem_vma.c:130 msm_gem_vma_init+0x150/0x18c [msm] Modules linked in: ... (long list of modules) CPU: 6 UID: 0 PID: 324 Comm: (udev-worker) Not tainted 6.15.0-03037-gaacc73ceeb8b #4 PREEMPT Hardware name: Qualcomm Technologies, Inc. QRB4210 RB2 (DT) pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : msm_gem_vma_init+0x150/0x18c [msm] lr : msm_gem_vma_init+0x150/0x18c [msm] sp : ffff80008144b280 ... Call trace: msm_gem_vma_init+0x150/0x18c [msm] (P) get_vma_locked+0xc0/0x194 [msm] msm_gem_get_and_pin_iova_range+0x4c/0xdc [msm] msm_gem_kernel_new+0x48/0x160 [msm] msm_gpu_init+0x34c/0x53c [msm] adreno_gpu_init+0x1b0/0x2d8 [msm] a6xx_gpu_init+0x1e8/0x9e0 [msm] adreno_bind+0x2b8/0x348 [msm] component_bind_all+0x100/0x230 msm_drm_bind+0x13c/0x3d0 [msm] try_to_bring_up_aggregate_device+0x164/0x1d0 __component_add+0xa4/0x174 component_add+0x14/0x20 dsi_dev_attach+0x20/0x34 [msm] dsi_host_attach+0x58/0x98 [msm] devm_mipi_dsi_attach+0x34/0x90 lt9611uxc_attach_dsi.isra.0+0x94/0x124 [lontium_lt9611uxc] lt9611uxc_probe+0x540/0x5fc [lontium_lt9611uxc] i2c_device_probe+0x148/0x2a8 really_probe+0xbc/0x2c0 __driver_probe_device+0x78/0x120 driver_probe_device+0x3c/0x154 __driver_attach+0x90/0x1a0 bus_for_each_dev+0x68/0xb8 driver_attach+0x24/0x30 bus_add_driver+0xe4/0x208 driver_register+0x68/0x124 i2c_register_driver+0x48/0xcc lt9611uxc_driver_init+0x20/0x1000 [lontium_lt9611uxc] do_one_initcall+0x60/0x1d4 do_init_module+0x54/0x1fc load_module+0x1748/0x1c8c init_module_from_file+0x74/0xa0 __arm64_sys_finit_module+0x130/0x2f8 invoke_syscall+0x48/0x104 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x2c/0x80 el0t_64_sync_handler+0x10c/0x138 el0t_64_sync+0x198/0x19c ---[ end trace 0000000000000000 ]--- msm_dpu 5e01000.display-controller: [drm:msm_gpu_init [msm]] *ERROR* could not allocate memptrs: -22 msm_dpu 5e01000.display-controller: failed to load adreno gpu platform a400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 19 msm_dpu 5e01000.display-controller: failed to bind 5900000.gpu (ops a3xx_ops [msm]): -22 msm_dpu 5e01000.display-controller: adev bind failed: -22 lt9611uxc 0-002b: failed to attach dsi to host lt9611uxc 0-002b: probe with driver lt9611uxc failed with error -22 | |||||
| CVE-2025-39679 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/nvif: Fix potential memory leak in nvif_vmm_ctor(). When the nvif_vmm_type is invalid, we will return error directly without freeing the args in nvif_vmm_ctor(), which leading a memory leak. Fix it by setting the ret -EINVAL and goto done. | |||||
| CVE-2025-38696 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: MIPS: Don't crash in stack_top() for tasks without ABI or vDSO Not all tasks have an ABI associated or vDSO mapped, for example kthreads never do. If such a task ever ends up calling stack_top(), it will derefence the NULL ABI pointer and crash. This can for example happen when using kunit: mips_stack_top+0x28/0xc0 arch_pick_mmap_layout+0x190/0x220 kunit_vm_mmap_init+0xf8/0x138 __kunit_add_resource+0x40/0xa8 kunit_vm_mmap+0x88/0xd8 usercopy_test_init+0xb8/0x240 kunit_try_run_case+0x5c/0x1a8 kunit_generic_run_threadfn_adapter+0x28/0x50 kthread+0x118/0x240 ret_from_kernel_thread+0x14/0x1c Only dereference the ABI point if it is set. The GIC page is also included as it is specific to the vDSO. Also move the randomization adjustment into the same conditional. | |||||
| CVE-2025-39729 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix dereferencing uninitialized error pointer Fix below smatch warnings: drivers/crypto/ccp/sev-dev.c:1312 __sev_platform_init_locked() error: we previously assumed 'error' could be null | |||||
| CVE-2025-39783 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Fix configfs group list head handling Doing a list_del() on the epf_group field of struct pci_epf_driver in pci_epf_remove_cfs() is not correct as this field is a list head, not a list entry. This list_del() call triggers a KASAN warning when an endpoint function driver which has a configfs attribute group is torn down: ================================================================== BUG: KASAN: slab-use-after-free in pci_epf_remove_cfs+0x17c/0x198 Write of size 8 at addr ffff00010f4a0d80 by task rmmod/319 CPU: 3 UID: 0 PID: 319 Comm: rmmod Not tainted 6.16.0-rc2 #1 NONE Hardware name: Radxa ROCK 5B (DT) Call trace: show_stack+0x2c/0x84 (C) dump_stack_lvl+0x70/0x98 print_report+0x17c/0x538 kasan_report+0xb8/0x190 __asan_report_store8_noabort+0x20/0x2c pci_epf_remove_cfs+0x17c/0x198 pci_epf_unregister_driver+0x18/0x30 nvmet_pci_epf_cleanup_module+0x24/0x30 [nvmet_pci_epf] __arm64_sys_delete_module+0x264/0x424 invoke_syscall+0x70/0x260 el0_svc_common.constprop.0+0xac/0x230 do_el0_svc+0x40/0x58 el0_svc+0x48/0xdc el0t_64_sync_handler+0x10c/0x138 el0t_64_sync+0x198/0x19c ... Remove this incorrect list_del() call from pci_epf_remove_cfs(). | |||||
| CVE-2025-39712 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: mt9m114: Fix deadlock in get_frame_interval/set_frame_interval Getting / Setting the frame interval using the V4L2 subdev pad ops get_frame_interval/set_frame_interval causes a deadlock, as the subdev state is locked in the [1] but also in the driver itself. In [2] it's described that the caller is responsible to acquire and release the lock in this case. Therefore, acquiring the lock in the driver is wrong. Remove the lock acquisitions/releases from mt9m114_ifp_get_frame_interval() and mt9m114_ifp_set_frame_interval(). [1] drivers/media/v4l2-core/v4l2-subdev.c - line 1129 [2] Documentation/driver-api/media/v4l2-subdev.rst | |||||
| CVE-2025-39741 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/migrate: don't overflow max copy size With non-page aligned copy, we need to use 4 byte aligned pitch, however the size itself might still be close to our maximum of ~8M, and so the dimensions of the copy can easily exceed the S16_MAX limit of the copy command leading to the following assert: xe 0000:03:00.0: [drm] Assertion `size / pitch <= ((s16)(((u16)~0U) >> 1))` failed! platform: BATTLEMAGE subplatform: 1 graphics: Xe2_HPG 20.01 step A0 media: Xe2_HPM 13.01 step A1 tile: 0 VRAM 10.0 GiB GT: 0 type 1 WARNING: CPU: 23 PID: 10605 at drivers/gpu/drm/xe/xe_migrate.c:673 emit_copy+0x4b5/0x4e0 [xe] To fix this account for the pitch when calculating the number of current bytes to copy. (cherry picked from commit 8c2d61e0e916e077fda7e7b8e67f25ffe0f361fc) | |||||
| CVE-2025-39695 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Flush delayed SKBs while releasing RXE resources When skb packets are sent out, these skb packets still depends on the rxe resources, for example, QP, sk, when these packets are destroyed. If these rxe resources are released when the skb packets are destroyed, the call traces will appear. To avoid skb packets hang too long time in some network devices, a timestamp is added when these skb packets are created. If these skb packets hang too long time in network devices, these network devices can free these skb packets to release rxe resources. | |||||
| CVE-2025-39922 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ixgbe: fix incorrect map used in eee linkmode incorrectly used ixgbe_lp_map in loops intended to populate the supported and advertised EEE linkmode bitmaps based on ixgbe_ls_map. This results in incorrect bit setting and potential out-of-bounds access, since ixgbe_lp_map and ixgbe_ls_map have different sizes and purposes. ixgbe_lp_map[i] -> ixgbe_ls_map[i] Use ixgbe_ls_map for supported and advertised linkmodes, and keep ixgbe_lp_map usage only for link partner (lp_advertised) mapping. | |||||
| CVE-2025-39956 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: igc: don't fail igc_probe() on LED setup error When igc_led_setup() fails, igc_probe() fails and triggers kernel panic in free_netdev() since unregister_netdev() is not called. [1] This behavior can be tested using fault-injection framework, especially the failslab feature. [2] Since LED support is not mandatory, treat LED setup failures as non-fatal and continue probe with a warning message, consequently avoiding the kernel panic. [1] kernel BUG at net/core/dev.c:12047! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 937 Comm: repro-igc-led-e Not tainted 6.17.0-rc4-enjuk-tnguy-00865-gc4940196ab02 #64 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:free_netdev+0x278/0x2b0 [...] Call Trace: <TASK> igc_probe+0x370/0x910 local_pci_probe+0x3a/0x80 pci_device_probe+0xd1/0x200 [...] [2] #!/bin/bash -ex FAILSLAB_PATH=/sys/kernel/debug/failslab/ DEVICE=0000:00:05.0 START_ADDR=$(grep " igc_led_setup" /proc/kallsyms \ | awk '{printf("0x%s", $1)}') END_ADDR=$(printf "0x%x" $((START_ADDR + 0x100))) echo $START_ADDR > $FAILSLAB_PATH/require-start echo $END_ADDR > $FAILSLAB_PATH/require-end echo 1 > $FAILSLAB_PATH/times echo 100 > $FAILSLAB_PATH/probability echo N > $FAILSLAB_PATH/ignore-gfp-wait echo $DEVICE > /sys/bus/pci/drivers/igc/bind | |||||
| CVE-2025-38731 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix vm_bind_ioctl double free bug If the argument check during an array bind fails, the bind_ops are freed twice as seen below. Fix this by setting bind_ops to NULL after freeing. ================================================================== BUG: KASAN: double-free in xe_vm_bind_ioctl+0x1b2/0x21f0 [xe] Free of addr ffff88813bb9b800 by task xe_vm/14198 CPU: 5 UID: 0 PID: 14198 Comm: xe_vm Not tainted 6.16.0-xe-eudebug-cmanszew+ #520 PREEMPT(full) Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.2411.A02.2110081023 10/08/2021 Call Trace: <TASK> dump_stack_lvl+0x82/0xd0 print_report+0xcb/0x610 ? __virt_addr_valid+0x19a/0x300 ? xe_vm_bind_ioctl+0x1b2/0x21f0 [xe] kasan_report_invalid_free+0xc8/0xf0 ? xe_vm_bind_ioctl+0x1b2/0x21f0 [xe] ? xe_vm_bind_ioctl+0x1b2/0x21f0 [xe] check_slab_allocation+0x102/0x130 kfree+0x10d/0x440 ? should_fail_ex+0x57/0x2f0 ? xe_vm_bind_ioctl+0x1b2/0x21f0 [xe] xe_vm_bind_ioctl+0x1b2/0x21f0 [xe] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe] ? __lock_acquire+0xab9/0x27f0 ? lock_acquire+0x165/0x300 ? drm_dev_enter+0x53/0xe0 [drm] ? find_held_lock+0x2b/0x80 ? drm_dev_exit+0x30/0x50 [drm] ? drm_ioctl_kernel+0x128/0x1c0 [drm] drm_ioctl_kernel+0x128/0x1c0 [drm] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe] ? find_held_lock+0x2b/0x80 ? __pfx_drm_ioctl_kernel+0x10/0x10 [drm] ? should_fail_ex+0x57/0x2f0 ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe] drm_ioctl+0x352/0x620 [drm] ? __pfx_drm_ioctl+0x10/0x10 [drm] ? __pfx_rpm_resume+0x10/0x10 ? do_raw_spin_lock+0x11a/0x1b0 ? find_held_lock+0x2b/0x80 ? __pm_runtime_resume+0x61/0xc0 ? rcu_is_watching+0x20/0x50 ? trace_irq_enable.constprop.0+0xac/0xe0 xe_drm_ioctl+0x91/0xc0 [xe] __x64_sys_ioctl+0xb2/0x100 ? rcu_is_watching+0x20/0x50 do_syscall_64+0x68/0x2e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fa9acb24ded (cherry picked from commit a01b704527c28a2fd43a17a85f8996b75ec8492a) | |||||
| CVE-2025-39717 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: open_tree_attr: do not allow id-mapping changes without OPEN_TREE_CLONE As described in commit 7a54947e727b ('Merge patch series "fs: allow changing idmappings"'), open_tree_attr(2) was necessary in order to allow for a detached mount to be created and have its idmappings changed without the risk of any racing threads operating on it. For this reason, mount_setattr(2) still does not allow for id-mappings to be changed. However, there was a bug in commit 2462651ffa76 ("fs: allow changing idmappings") which allowed users to bypass this restriction by calling open_tree_attr(2) *without* OPEN_TREE_CLONE. can_idmap_mount() prevented this bug from allowing an attached mountpoint's id-mapping from being modified (thanks to an is_anon_ns() check), but this still allows for detached (but visible) mounts to have their be id-mapping changed. This risks the same UAF and locking issues as described in the merge commit, and was likely unintentional. | |||||
| CVE-2025-39904 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: arm64: kexec: initialize kexec_buf struct in load_other_segments() Patch series "kexec: Fix invalid field access". The kexec_buf structure was previously declared without initialization. commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly") added a field that is always read but not consistently populated by all architectures. This un-initialized field will contain garbage. This is also triggering a UBSAN warning when the uninitialized data was accessed: ------------[ cut here ]------------ UBSAN: invalid-load in ./include/linux/kexec.h:210:10 load of value 252 is not a valid value for type '_Bool' Zero-initializing kexec_buf at declaration ensures all fields are cleanly set, preventing future instances of uninitialized memory being used. An initial fix was already landed for arm64[0], and this patchset fixes the problem on the remaining arm64 code and on riscv, as raised by Mark. Discussions about this problem could be found at[1][2]. This patch (of 3): The kexec_buf structure was previously declared without initialization. commit bf454ec31add ("kexec_file: allow to place kexec_buf randomly") added a field that is always read but not consistently populated by all architectures. This un-initialized field will contain garbage. This is also triggering a UBSAN warning when the uninitialized data was accessed: ------------[ cut here ]------------ UBSAN: invalid-load in ./include/linux/kexec.h:210:10 load of value 252 is not a valid value for type '_Bool' Zero-initializing kexec_buf at declaration ensures all fields are cleanly set, preventing future instances of uninitialized memory being used. | |||||
| CVE-2025-39809 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 8.4 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: HID: intel-thc-hid: intel-quicki2c: Fix ACPI dsd ICRS/ISUB length The QuickI2C ACPI _DSD methods return ICRS and ISUB data with a trailing byte, making the actual length is one more byte than the structs defined. It caused stack-out-of-bounds and kernel crash: kernel: BUG: KASAN: stack-out-of-bounds in quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c] kernel: Write of size 12 at addr ffff888106d1f900 by task kworker/u33:2/75 kernel: kernel: CPU: 3 UID: 0 PID: 75 Comm: kworker/u33:2 Not tainted 6.16.0+ #3 PREEMPT(voluntary) kernel: Workqueue: async async_run_entry_fn kernel: Call Trace: kernel: <TASK> kernel: dump_stack_lvl+0x76/0xa0 kernel: print_report+0xd1/0x660 kernel: ? __pfx__raw_spin_lock_irqsave+0x10/0x10 kernel: ? __kasan_slab_free+0x5d/0x80 kernel: ? kasan_addr_to_slab+0xd/0xb0 kernel: kasan_report+0xe1/0x120 kernel: ? quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c] kernel: ? quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c] kernel: kasan_check_range+0x11c/0x200 kernel: __asan_memcpy+0x3b/0x80 kernel: quicki2c_acpi_get_dsd_property.constprop.0+0x111/0x1b0 [intel_quicki2c] kernel: ? __pfx_quicki2c_acpi_get_dsd_property.constprop.0+0x10/0x10 [intel_quicki2c] kernel: quicki2c_get_acpi_resources+0x237/0x730 [intel_quicki2c] [...] kernel: </TASK> kernel: kernel: The buggy address belongs to stack of task kworker/u33:2/75 kernel: and is located at offset 48 in frame: kernel: quicki2c_get_acpi_resources+0x0/0x730 [intel_quicki2c] kernel: kernel: This frame has 3 objects: kernel: [32, 36) 'hid_desc_addr' kernel: [48, 59) 'i2c_param' kernel: [80, 224) 'i2c_config' ACPI DSD methods return: \_SB.PC00.THC0.ICRS Buffer 000000003fdc947b 001 Len 0C = 0A 00 80 1A 06 00 00 00 00 00 00 00 \_SB.PC00.THC0.ISUB Buffer 00000000f2fcbdc4 001 Len 91 = 00 00 00 00 00 00 00 00 00 00 00 00 Adding reserved padding to quicki2c_subip_acpi_parameter/config. | |||||
| CVE-2025-39884 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix subvolume deletion lockup caused by inodes xarray race There is a race condition between inode eviction and inode caching that can cause a live struct btrfs_inode to be missing from the root->inodes xarray. Specifically, there is a window during evict() between the inode being unhashed and deleted from the xarray. If btrfs_iget() is called for the same inode in that window, it will be recreated and inserted into the xarray, but then eviction will delete the new entry, leaving nothing in the xarray: Thread 1 Thread 2 --------------------------------------------------------------- evict() remove_inode_hash() btrfs_iget_path() btrfs_iget_locked() btrfs_read_locked_inode() btrfs_add_inode_to_root() destroy_inode() btrfs_destroy_inode() btrfs_del_inode_from_root() __xa_erase In turn, this can cause issues for subvolume deletion. Specifically, if an inode is in this lost state, and all other inodes are evicted, then btrfs_del_inode_from_root() will call btrfs_add_dead_root() prematurely. If the lost inode has a delayed_node attached to it, then when btrfs_clean_one_deleted_snapshot() calls btrfs_kill_all_delayed_nodes(), it will loop forever because the delayed_nodes xarray will never become empty (unless memory pressure forces the inode out). We saw this manifest as soft lockups in production. Fix it by only deleting the xarray entry if it matches the given inode (using __xa_cmpxchg()). | |||||