Total
794 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-33802 | 1 Juniper | 6 Ex2300, Ex4000, Ex4100 and 3 more | 2026-10-25 | N/A | 5.5 MEDIUM |
| A Missing Authorization vulnerability in the CLI of Juniper Networks Junos OS on EX Series allows a local, authenticated attacker to cause a Denial-of-Service (DoS). On EX2300, EX4000, EX4100, EX4300-MP (Multigigabit) and EX4400 switches, an authenticated, local attacker with no specific permissions or class can execute a specific, privileged CLI 'request' command which will cause complete traffic impact until the system automatically recovers. This issue affects Junos OS on EX2300, EX4000, EX4100, EX4300-MP (Multigigabit) and EX4400: * 23.2R2 versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S3, * 25.2 versions before 25.2R2, * 25.4 versions before 25.4R1-S1. | |||||
| CVE-2026-33800 | 1 Juniper | 25 Junos, Lc2101, Lc2103 and 22 more | 2026-10-25 | N/A | 6.5 MEDIUM |
| An Unchecked Input for Loop Condition vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS).Micro-BFD session flaps generate respective up/down events which are queued by PFEMAN for processing. Especially in a Virtual-Chassis (VC) scenario with locality‑bias configured, processing takes a significant amount of time for each event. If these sessions keep flapping, new events are constantly added, and in turn PFEMAN never completes processing these events. This results in the PFEMAN watchdog timer expiring, which causes the FPC to crash and restart, representing a complete service outage. This issue only affects MX series FPCs up to and including MPC9, and LC2101/2103 and LC480. It does not affect MPC10/11, LC4800/9600, and MX304. This issue affects Junos OS on MX Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S3, * 25.2 versions before 25.2R2. | |||||
| CVE-2026-57027 | 1 Juniper | 6 Ex4100, Ex4100-f, Ex4100-h and 3 more | 2026-10-25 | N/A | 6.5 MEDIUM |
| A Missing Release of Memory after Effective Lifetime vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on specific EX Series devices allows an unauthenticated adjacent attacker to cause a Denial-of-Service (DoS).When sFlow is configured in a Virtual Chassis (VC) scenario with EX4100 Series or EX4400 Series devices, multicast traffic which is received on one VC member and sent out on another member leads to a memory leak and ultimately an FPC crash and restart. The leak can be monitored by watching the continuous increase of the buffer values in the output of: user@host> show chassis fpc This issue affects Junos OS on EX4100 Series and EX4400: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2. | |||||
| CVE-2026-57032 | 1 Juniper | 10 Ex2300, Ex2300-c, Ex3400 and 7 more | 2026-10-25 | N/A | 6.5 MEDIUM |
| An Improper Handling of Undefined Parameters vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on EX Series devices allows an authenticated attacker with low privileges to cause a Denial-of-Service (DoS). If an attempt is made to subscribe to an unsupported telemetry sensor path on EX2300, EX3400, EX4000, EX4100 and EX4400 via gRPC, this causes the FPC to crash. This leads to a complete service outage until the module has automatically restarted. The following log message can be seen when this issue happens: agentd[<PID>]: AGENTD_RESOURCE_NOT_FOUND: No resource name found for <sensor> This issue affects Junos OS on EX2300, EX3400, EX4000, EX4100 and EX4400 devices: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S5, * 24.4 versions before 24.4R2. | |||||
| CVE-2026-57021 | 1 Juniper | 20 Junos, Srx1500, Srx1600 and 17 more | 2026-10-25 | N/A | 5.3 MEDIUM |
| An Out-of-bounds Write vulnerability in the http-gatekeeper (http-gk) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). If an SRX Series device is configured for remote-access VPN with pre-logon compliance check, a network-based attacker sending specifically formatted requests can trigger an out of bounds write leading to an http-gk process crash. This crash leads to unavailability of all services depending on the [ system services web-management ] configuration (like J-Web, remote access VPN and firewall authentication) until the process automatically restarts. This issue affects Junos OS on SRX Series: * 23.2 versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S4, * 25.2 versions before 25.2R2, * 25.4 versions before 25.4R1-S1, 25.4R2. | |||||
| CVE-2026-57020 | 1 Juniper | 3 Junos, Qfx10008, Qfx10016 | 2026-10-25 | N/A | 6.5 MEDIUM |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on QFX10000 Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS). On all QFX10000 platforms in an EVPN-VxLAN scenario, if an attacker sends IPv6 multicast traffic and these packets reach the non-IRB interface of a spine switch it floods the packet to other spines and all Ethernet Segment Identifier (ESI) leaf switches. This flooding causes the packet to be forwarded in a endless loop, which can lead to saturation of the involved links and in turn impact to legitimate traffic. This issue affects Junos OS on QFX10000 Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S4. This issue does not affect Junos version after 24.4 as the QFX10000 Series devices are not supported on newer versions anymore. | |||||
| CVE-2026-57031 | 1 Juniper | 8 Junos, Lc4800, Lc4802 and 5 more | 2026-10-25 | N/A | 4.7 MEDIUM |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on MX Series allows adjacent subscribers to bypass configured firewall filters. On MX Series devices with MPC10/11, LC4800/9600, and MX304 with subscribers configured on static interfaces, ingress firewall filters are not enforced, so that neither protocol level nor upstream bandwidth limitation are in effect. This issue affects Junos OS on MX with MPC10/11, LC4800/9600/4802, and MX304: * 23.2 versions from 23.2R2-S1 before 23.2R2-S7, * 23.4 versions from 23.4R2 before 23.4R2-S7, * 24.2 versions before 24.2R2-S3, * 24.4 versions before 24.4R2-S2, * 25.2 versions before 25.2R2. | |||||
| CVE-2026-57026 | 1 Juniper | 24 Junos, Mx-spc3, Mx240 and 21 more | 2026-10-25 | N/A | 7.5 HIGH |
| An Improper Validation of Syntactic Correctness of Input vulnerability in the SIP plugin of Juniper Networks Junos OS on MX Series with SPC3 and SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).If the SIP ALG is enabled on an affected device, the processing of a malformed SIP invite packet will cause a flow processing daemon (flowd) crash and restart. This leads to a complete service outage until the system has automatically recovered. This issue affects Junos OS on MX Series with SPC3 and SRX Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S5, * 24.4 versions before 24.4R2-S4, * 25.2 versions before 25.2R2, * 25.4 versions before 25.4R1-S2. | |||||
| CVE-2026-57054 | 1 Juniper | 12 Junos, Mx10004, Mx10008 and 9 more | 2026-10-25 | N/A | 5.8 MEDIUM |
| A Use of Incorrectly-Resolved Name or Reference vulnerability in the URL filtering plugin of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass web filtering and access downstream resources that should be unreachable. If an MX Series device is configured with web filtering, and an attacker sends a request with a specifically formatted URL, this request will get forwarded despite the system being configured to block it. In turn, an attacker can access downstream resources that are expected to be unreachable. This issue affects Junos OS on MX Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S8, * 24.2 versions before 24.2R2-S5, * 24.4 versions before 24.4R2-S4, * 25.2 versions before 25.2R2-S1, * 25.4 versions before 25.4R1-S2, 25.4R2. | |||||
| CVE-2026-57019 | 1 Juniper | 12 Junos, Mx10004, Mx10008 and 9 more | 2026-10-25 | N/A | 6.5 MEDIUM |
| An Improper Validation of Specified Quantity in Input vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, adjacent attacker to cause a Denial-of-Service (DoS). When a specific packet is received from device in the same broadcast domain, an affected system calculates the packet size incorrectly. This causes further packet processing to fail, which triggers an FPC major error, resulting in a FPC reset impacting traffic until the FPC has automatically recovered. Affected scenarios are: MAP-T, or non-IP traffic encapsulated in IP (e.g. MPLS over GRE). When this issue happens the following logs can be observed: fpc<#> CMError: /fpc/0/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_LI_INT_REG_UNROLL_TAIL_LENGTH_OVF (0x2205eb), scope: pfe, category: functional, severity: major, module: MQSS(0), type: LI: Unroll TAIL length overflow, oc_category: default fpc<#> Performing action reset-fru for error /fpc/0/pfe/0/cm/0/MQSS(0)/0/MQSS_CMERROR_LI_INT_REG_UNROLL_TAIL_LENGTH_OVF (0x2205eb) in module: MQSS(0) with scope: pfe category: functional level: major, oc_category: default This issue affects Junos OS on MX Series: * all versions before 23.2R2-S6, * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S4, * 25.2 versions before 25.2R2. | |||||
| CVE-2026-57024 | 1 Juniper | 24 Junos, Mx-spc3, Mx240 and 21 more | 2026-10-25 | N/A | 5.3 MEDIUM |
| A Use of Multiple Resources with Duplicate Identifier vulnerability in the IKE daemon (iked) of Juniper Networks Junos OS on MX with SPC3 and SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). On an MX with SPC3 and SRX devices configured for VPN service, when a large number of VPN negotiations fail a peer index rollover will eventually occur. As a result, new peers are assigned index values that are already in use and the iked process starts to crash repeatedly. This results in failure to establish new VPN connections and rekeying existing ones. To restore service the system must be rebooted. Please note that the index value can't be monitored, so customers should monitor tunnel up and down events and if a lot of events occur over an extended period of time it becomes likely that this issue occurs. To be exposed to this issue the system needs to run iked (vs. kmd which is not affected), which can be verified with: user@host> show system processes extensive | match "KMD|IKED" This issue affects Junos OS on MX with SPC3, SRX Series: * all versions before 23.2R2-S7, * 23.4 versions before 23.4R2-S6, * 24.2 versions before 24.2R2-S3, * 24.4 versions before 24.4R2-S4, * 25.2 versions before 25.2R1-S1. | |||||
| CVE-2026-57030 | 1 Juniper | 20 Junos, Srx1500, Srx1600 and 17 more | 2026-10-25 | N/A | 5.9 MEDIUM |
| A Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). As part of the stateful traffic processing on SRX Series devices flows are being established, and removed when not needed anymore. During the removal process the timeout of a flow should be set to 3 seconds and consequentially the flow should be removed shortly after. Due to a race condition occurring when setting the timeout there is a chance (the exact conditions are outside the attackers control) that the timeout is instead set to a very high value of larger than 10,000 seconds: user@host> show security flow session | match timeout Session ID: 98784248524, Policy name: PROD-FLOW/4, HA State: Active, Timeout: 85250, Session State: Valid This will lead to an accumulation of flows which can be observed by an ever-increasing value of invalidated sessions in the output of 'show security flow session summary': user@host> show security flow session summary | match invalid Invalidated sessions: 216931These sessions can't be cleared manually with the 'clear security flow session' command, which will either lead to forwarding to stop (and the system needs to be manually recovered with a reboot) or to a flowd core and automatic reboot. This issue affects Junos OS on SRX Series: * 24.2 versions before 24.2R2-S3, * 24.4 versions before 24.4R2-S1, 24.4R2-S2, * 25.2 versions before 25.2R1-S2, 25.2R2. This issue does not affect releases earlier than 24.2R1; | |||||
| CVE-2026-57022 | 1 Juniper | 18 Junos, Mx-spc3, Mx240 and 15 more | 2026-10-25 | N/A | 5.9 MEDIUM |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on MX with SPC3 and SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). When an affected device initiates a TCP connection to an attacker-controlled system that responds with a specific packet, this causes a PFE crash and restart, which affects all services until the system has automatically recovered. This issue can happen among others in the following scenarios: ALG, SSL proxy, UTM, RTLOG, AppQoE probing, AAMW, ICAP, URL filtering. This issue affects Junos OS on MX Series with SPC3, SRX5k Series with SPC3, SRX1600 Series, SRX2300 Series, SRX4000 Series, and vSRX Series: * all versions before 23.2R2-S4, * 23.4 versions before 23.4R2-S5, * 24.2 versions before 24.2R2. | |||||
| CVE-2026-57023 | 1 Juniper | 24 Junos, Mx-spc3, Mx240 and 21 more | 2026-10-25 | N/A | 7.5 HIGH |
| An Improper Validation of Specified Quantity in Input vulnerability in the TCP proxy plugin of Juniper Networks Junos OS on MX Series with SPC3, and SRX Series allows an unauthenticated, network-based attacker to cause a complete Denial of Service (DoS). When TCP proxy is engaged in a flow session, to support ALGs, Advanced Anti-Malware, ICAP or UTM, a TCP packet with specifically malformed TCP header will cause flow processing daemon (flowd) to crash and restart. This causes a complete service outage until the system has automatically recovered. This issue affects Junos OS on MX with SPC3, and SRX Series: * 23.4 versions before 23.4R2-S7, * 24.2 versions before 24.2R2-S4, * 24.4 versions before 24.4R2-S3, * 25.2 versions before 25.2R2. This issue does not affect releases before 23.4R1. | |||||
| CVE-2025-60010 | 1 Juniper | 2 Junos, Junos Os Evolved | 2026-10-18 | N/A | 5.4 MEDIUM |
| A password aging vulnerability in the RADIUS client of Juniper Networks Junos OS and Junos OS Evolved allows an authenticated, network-based attacker to access the device without enforcing the required password change. Affected devices allow logins by users for whom the RADIUS server has responded with a reject and required the user to change the password as their password was expired. Therefore the policy mandating the password change is not enforced. This does not allow users to login with a wrong password, but only with the correct but expired one. This issue affects: Junos OS: * all versions before 22.4R3-S8, * 23.2 versions before 23.2R2-S4, * 23.4 versions before 23.4R2-S5, * 24.2 versions before 24.2R2-S1, * 24.4 versions before 24.4R1-S3, 24.4R2; Junos OS Evolved: * all versions before 22.4R3-S8-EVO, * 23.2 versions before 23.2R2-S4-EVO, * 23.4 versions before 23.4R2-S5-EVO, * 24.2 versions before 24.2R2-S1-EVO, * 24.4 versions before 24.4R1-S3-EVO, 24.4R2-EVO. | |||||
| CVE-2025-60004 | 1 Juniper | 2 Junos, Junos Os Evolved | 2026-10-18 | N/A | 7.5 HIGH |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial-Of-Service (DoS). When an affected system receives a specific BGP EVPN update message over an established BGP session, this causes an rpd crash and restart. A BGP EVPN configuration is not necessary to be vulnerable. If peers are not configured to send BGP EVPN updates to a vulnerable device, then this issue can't occur. This issue affects iBGP and eBGP, over IPv4 and IPv6. This issue affects: Junos OS: * 23.4 versions from 23.4R2-S3 before 23.4R2-S5, * 24.2 versions from 24.2R2 before 24.2R2-S1, * 24.4 versions before 24.4R1-S3, 24.4R2; Junos OS Evolved: * 23.4-EVO versions from 23.4R2-S2-EVO before 23.4R2-S5-EVO, * 24.2-EVO versions from 24.2R2-EVO before 24.2R2-S1-EVO, * 24.4-EVO versions before 24.4R1-S3-EVO, 24.4R2-EVO. | |||||
| CVE-2025-59962 | 1 Juniper | 2 Junos, Junos Os Evolved | 2026-10-18 | N/A | 5.3 MEDIUM |
| An Access of Uninitialized Pointer vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved with BGP sharding configured allows an attacker triggering indirect next-hop updates, along with timing outside the attacker's control, to cause rpd to crash and restart, leading to a Denial of Service (DoS). With BGP sharding enabled, triggering route resolution of an indirect next-hop (e.g., an IGP route change over which a BGP route gets resolved), may cause rpd to crash and restart. An attacker causing continuous IGP route churn, resulting in repeated route re-resolution, will increase the likelihood of triggering this issue, leading to a potentially extended DoS condition. This issue affects: Junos OS: * all versions before 21.4R3-S6, * from 22.1 before 22.1R3-S6, * from 22.2 before 22.2R3-S3, * from 22.3 before 22.3R3-S3, * from 22.4 before 22.4R3, * from 23.2 before 23.2R2; Junos OS Evolved: * all versions before 22.3R3-S3-EVO, * from 22.4 before 22.4R3-EVO, * from 23.2 before 23.2R2-EVO. Versions before Junos OS 21.3R1 and Junos OS Evolved 21.3R1-EVO are unaffected by this issue. | |||||
| CVE-2004-0230 | 7 Juniper, Mcafee, Microsoft and 4 more | 12 Junos, Network Data Loss Prevention, Windows 2000 and 9 more | 2026-10-09 | 5.0 MEDIUM | N/A |
| TCP, when using a large Window Size, makes it easier for remote attackers to guess sequence numbers and cause a denial of service (connection loss) to persistent TCP connections by repeatedly injecting a TCP RST packet, especially in protocols that use long-lived connections, such as BGP. | |||||
| CVE-2015-5477 | 13 Apple, Canonical, Debian and 10 more | 77 Os X Server, Ubuntu Linux, Debian Linux and 74 more | 2026-10-09 | 7.8 HIGH | 7.5 HIGH |
| named in ISC BIND 9.x before 9.9.7-P2 and 9.10.x before 9.10.2-P3 allows remote attackers to cause a denial of service (REQUIRE assertion failure and daemon exit) via TKEY queries. | |||||
| CVE-2025-59957 | 1 Juniper | 13 Ex4600, Ex4650, Junos and 10 more | 2026-10-08 | N/A | 6.8 MEDIUM |
| An Origin Validation Error vulnerability in an insufficient protected file of Juniper Networks Junos OS on EX4600 Series and QFX5000 Series allows an unauthenticated attacker with physical access to the device to create a backdoor which allows complete control of the system. When a device isn't configured with a root password, an attacker can modify a specific file. It's contents will be added to the Junos configuration of the device without being visible. This allows for the addition of any configuration unknown to the actual operator, which includes users, IP addresses and other configuration which could allow unauthorized access to the device. This exploit is persistent across reboots and even zeroization. The indicator of compromise is a modified /etc/config/<platform>-defaults[-flex].conf file. Review that file for unexpected configuration statements, or compare it to an unmodified version which can be extracted from the original Juniper software image file. For details on the extraction procedure please contact Juniper Technical Assistance Center (JTAC). To restore the device to a trusted initial configuration the system needs to be reinstalled from physical media. This issue affects Junos OS on EX4600 Series and QFX5000 Series: * All versions before 21.4R3, * 22.2 versions before 22.2R3-S3. | |||||