Total
398612 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-72232 | 2026-08-17 | N/A | 7.8 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: ensure minimal ethernet header on TX As documented in commit 8bd67ebb50c0 ("net: bridge: xmit: make sure we have at least eth header len bytes"), it is possible by for a local user with eBPF TC hook access to attach a tc filter which truncates the packet and redirects to an batadv interface. But the code assumes that at least ETH_HLEN bytes are available and thus might read outside of the available buffer. The batadv_interface_tx() must therefore always check itself if enough data is available for the ethernet header and don't rely on min_header_len. | |||||
| CVE-2026-72231 | 2026-08-17 | N/A | 7.5 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: avoid request storms during pending request batadv_send_tt_request() allocates a tt_req_node when none exists for the destination originator node. This should prevent that a multiple TT requests are send at the same time to an originator. But if allocation of the send buffer failed, this request must be cleaned up again. But indicator for such a failure is "ret == false". But the actual implementation is checking for "ret == true". The check must be inverted to not loose the information about the TT request directly after it was attempted to be sent out. This should avoid potential request storms. | |||||
| CVE-2026-72230 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: frag: free unfragmentable packet The caller of batadv_frag_send_packet() assume that the skb provided to the function are always consumed. But the pre-check for an empty payload or the zero fragment size returned an error without any further actions. A failed pre-check must use the same error handling code as the rest of the function. | |||||
| CVE-2026-72229 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: clean untagged VLAN on netdev registration failure When an mesh interface is registered, it creates an untagged struct batadv_meshif_vlan on top of it via the NETDEV_REGISTER notifier. But in this process, another receiver of this notification can veto the registration. The netdev registration will be aborted because of this veto. The register_netdevice() call will try to clean up the net_device using unregister_netdevice_queue() - which only uses the .priv_destructor to free private resources. In this situation, .dellink will not be called. The cleanup of the untagged batadv_meshif_vlan must thefore be done in the destructor to avoid a leak of this object. | |||||
| CVE-2026-72228 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: frag: fix primary_if leak on failed linearization If the skb has a frag_list, it must be linearized before it can be split using skb_split(). But when this step failed, it must not only free the skb but also take care of the reference to the already found primary_if. | |||||
| CVE-2026-72227 | 2026-08-17 | N/A | 8.1 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: mcast: avoid OOB read of num_dests header Before the access to struct batadv_tvlv_mcast_tracker's num_dests, it is attempted to check whether enough space is actually in the network header. But instead of using offsetofend() to check for the whole size (2) which must be accessible, offsetof() of is called. The latter is always returning 0. The comparison with the network header length will always return that enough data is available - even when only 1 or 0 bytes are accessible. Instead of using offsetofend(), use the more common check for the whole header. | |||||
| CVE-2026-72226 | 2026-08-17 | N/A | 9.8 CRITICAL | ||
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: tt: prevent TVLV OOB check overflow A TT unicast TVLV contains the number of VLANs stored in it. This number is an u16 and gets multiplied by the size of the struct batadv_tvlv_tt_vlan_data (8 bytes). The size can therefore overflow the u16 used to store the tt_vlan_len. All additional safety checks to prevent out-of-bounds access of the TVLV buffer are invalid due to this overflow. Using size_t prevents this overflow and ensures that the safety checks compare against the actual buffer requirements. | |||||
| CVE-2026-72224 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: Free arenas on btt_init() error paths The arenas allocated by discover_arenas() or create_arenas() are not freed on some error paths in btt_init(). This leaks memory when BTT initialization fails. Call free_arenas() from the affected error paths to release the allocations. [ as: commit message and log edits ] | |||||
| CVE-2026-72223 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: Free arena sub-allocations on discover_arenas() error path Memory allocated by btt_freelist_init(), btt_rtt_init(), and btt_maplocks_init() is not freed on some discover_arenas() error paths. This leaks memory when arena discovery fails. Add the missing kfree() calls to release the allocations before returning an error. [ as: commit message and log edits ] | |||||
| CVE-2026-72222 | 2026-08-17 | N/A | 9.8 CRITICAL | ||
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: pin svc_xprt across the asynchronous TLS handshake callback svc_tcp_handshake() stores the raw svc_xprt pointer in tls_handshake_args.ta_data and submits the request through tls_server_hello_x509(). The handshake core takes only sock_hold(req->hr_sk); nothing references the embedding struct svc_sock that svc_tcp_handshake_done() reaches via container_of(). Two close races leave the in-flight callback writing through a freed svc_sock. svc_sock_free() calls tls_handshake_cancel() and discards its return value: a false return means handshake_complete() has already set HANDSHAKE_F_REQ_COMPLETED but hp_done() may not have finished, yet svc_sock_free() proceeds to kfree(svsk). The cancel-loser fall-through inside svc_tcp_handshake() itself produces the same window: when wait_for_completion_interruptible_timeout() returns <= 0 (timeout or signal) and tls_handshake_cancel() returns false, the function does not drain, returns, and svc_handle_xprt() calls svc_xprt_received(), which clears XPT_BUSY and can drop the last reference. A concurrent close then runs svc_sock_free() while svc_tcp_handshake_done() is still updating xpt_flags and walking svsk->sk_handshake_done. The corruption surfaces as set_bit/clear_bit RMW into the freed xpt_flags slab slot and as complete_all() walking and writing the freed wait_queue_head_t list embedded in sk_handshake_done -- a slab-corruption primitive, not a benign read. The path is reachable on any TLS-enabled NFS server whenever a connection close overlaps the tlshd downcall delivery window; the interruptible wait means signal delivery suffices, not just SVC_HANDSHAKE_TO expiry. Take svc_xprt_get(xprt) immediately before tls_server_hello_x509() so the in-flight callback owns its own reference. Release it on the two edges where the callback is guaranteed not to fire -- submission failure from tls_server_hello_x509() and a successful tls_handshake_cancel() -- and at the tail of svc_tcp_handshake_done() after complete_all(). [cel: rewrote commit message to describe the actual change] | |||||
| CVE-2026-72221 | 2026-08-17 | N/A | 9.8 CRITICAL | ||
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: wait for in-flight TLS handshake callback when cancel loses race When wait_for_completion_interruptible_timeout() in svc_tcp_handshake() returns 0 (timeout) or -ERESTARTSYS (signal) and tls_handshake_cancel() then returns false, handshake_complete() has won the cancellation race: it has set HANDSHAKE_F_REQ_COMPLETED and is about to invoke svc_tcp_handshake_done(), but the callback's side effects on xpt_flags and on svsk->sk_handshake_done have not yet committed. The current code reads xpt_flags immediately to decide whether the session succeeded. Two races result. If the callback has executed set_bit(XPT_TLS_SESSION) but not yet clear_bit(XPT_HANDSHAKE), svc_tcp_handshake() sees a session, enqueues the transport, and returns. svc_xprt_received() then clears XPT_BUSY, a worker thread picks the transport up, the dispatcher in svc_handle_xprt() observes XPT_HANDSHAKE still set, and xpo_handshake is invoked a second time. That svc_tcp_handshake() calls init_completion(&svsk->sk_handshake_done) while the original callback concurrently calls complete_all() on it, corrupting the embedded swait_queue. If the callback has set HANDSHAKE_F_REQ_COMPLETED but not yet entered svc_tcp_handshake_done(), svc_tcp_handshake() reads XPT_TLS_SESSION as clear and tears the connection down even though the handshake is about to succeed. Wait for the callback to commit before inspecting xpt_flags. The completion is guaranteed to fire because handshake_complete() invokes svc_tcp_handshake_done() unconditionally once it has set HANDSHAKE_F_REQ_COMPLETED. | |||||
| CVE-2026-72220 | 2026-08-17 | N/A | 9.8 CRITICAL | ||
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: harden rq_procinfo lifecycle to prevent double-free The svc_release_rqst() function executes the callback inside rqstp->rq_procinfo->pc_release. However, if a worker thread begins processing a new request and encounters an early error path (e.g., unsupported protocol, short frame, or bad auth) before a valid rq_procinfo is installed, a stale release hook can be re-triggered against reused state from the previous RPC, resulting in a double-free or use-after-free vulnerability. Harden the lifecycle of rq_procinfo by: 1. Ensuring svc_release_rqst() always clears rq_procinfo after the optional pc_release() call, regardless of whether the hook exists. 2. Explicitly clearing rq_procinfo at request entry in svc_process() before any early decode or drop paths. 3. Ensuring svc_process_bc() does the same at backchannel entry. This guarantees that error flows will not encounter a non-NULL stale rq_procinfo pointer when there is nothing to release. | |||||
| CVE-2026-72219 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: lockd: Plug nlm_file leak when nlm_do_fopen() fails A client can repeatedly drive nlm_do_fopen() failures by presenting file handles that the underlying export rejects. After kzalloc_obj() succeeds in nlm_lookup_file(), the freshly allocated nlm_file is not yet inserted into nlm_files[]. The nlm_do_fopen() failure path jumps to out_unlock, which releases nlm_file_mutex and returns without freeing the allocation, so each failure leaks one nlm_file. Route the failure through out_free so kfree() runs before the function returns. | |||||
| CVE-2026-72218 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: lockd: Plug nlm_file refcount leak on cached nlm_do_fopen() failure The cached-file path in nlm_lookup_file() reaches the found: label unconditionally, even when nlm_do_fopen() fails. At that label *result and file->f_count are updated before the error is returned. The wrappers nlm3svc_lookup_file() and nlm4svc_lookup_file() then bail out of their switch without copying *result back to their caller, so the proc handler's local nlm_file pointer remains NULL and the cleanup path skips nlm_release_file(). The f_count increment is never released, and nlm_traverse_files() can no longer reap the file because its refcount never returns to zero between requests. Short-circuit the cached path so neither *result nor f_count is touched when nlm_do_fopen() fails on a hashed nlm_file. | |||||
| CVE-2026-72217 | 2026-08-17 | N/A | 9.8 CRITICAL | ||
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Bound-check xdr_buf_to_bvec() stores before writing xdr_buf_to_bvec() writes a bio_vec into the caller's array before testing whether that slot is in range, and the head branch performs the store with no check at all. When the caller's budget is exactly used up, the next store lands one element past the end of the array. The overflow label returns count - 1, which masks the surplus store but cannot undo it. rq_bvec, the array passed by nfsd_vfs_write(), is allocated to exactly rq_maxpages entries with no slack. The OOB store can land in adjacent slab memory; the bv_len and bv_offset fields written there are derived from client-supplied RPC payload sizes. Move the in-range check ahead of the store in the head, page-loop, and tail branches. With the check at the top of each sequence, count is incremented only after a successful store, so the overflow label can return count directly. | |||||
| CVE-2026-72215 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: MIPS: DEC: Ensure 32-bit stack location for o32 prom_printf() In 64-bit configurations calling any firmware entry points from a kernel thread other than the initial one will result in a situation where the stack has been placed in the XKPHYS 64-bit memory segment. Consequently the stack pointer is no longer a 32-bit value and when the 32-bit firmware code called uses 32-bit ALU operations to manipulate the stack pointer, the calculated result is incorrect (in fact in the 64-bit MIPS ISA almost all 32-bit ALU operations will produce an unpredictable result when executed on 64-bit data) and control goes astray. This may happen when no final console driver has been enabled in the configuration and consequently the initial console continues being used late into bootstrap, or with an upcoming change that will switch the zs driver to use a platform device, which in turn will make the console handover happen only after other kernel threads have already been started, and the kernel will hang at: pid_max: default: 32768 minimum: 301 or somewhat later, but always before: cblist_init_generic: Setting adjustable number of callback queues. has been printed. It seems that only the prom_printf() entry point is affected. Of all the other entry points wired only rex_slot_address() and rex_gettcinfo() are called from a kernel thread other than the initial one, specifically kernel_init(), and they are leaf functions that do no business with the stack, having worked with no issue ever since 64-bit support was added for the platform back in 2002. To address this issue then, arrange for the stack to be switched in the o32 wrapper as required for prom_printf() only, by supplying call_o32() with a pointer to a chunk of initdata space, which is placed in the CKSEG0 32-bit compatibility segment, observing that prom_printf() is only called from console output handler and therefore with the console lock held, implying no need for this code to be reentrant. Other firmware entry points may be called with interrupts enabled and no lock held, and may therefore require that call_o32() be reentrant. They trigger no issue at this point and "if it ain't broke, don't fix it," so just leave them alone. | |||||
| CVE-2026-72214 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: power: supply: cpcap-battery: Fix missing nvmem_device_put() causing reference leak In cpcap_battery_detect_battery_type(), the reference to an nvmem device obtained via nvmem_device_find() is not released with nvmem_device_put() on the success or read-failure paths, causing a permanent reference leak. The driver’s retry logic on subsequent battery property reads can compound this leak, preventing the nvmem device from ever being freed. Found by code review. | |||||
| CVE-2026-72213 | 2026-08-17 | N/A | 7.1 HIGH | ||
| In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix hugetlb cgroup rsvd charge/uncharge mismatch In alloc_hugetlb_folio(), a single h_cg pointer is used for both the rsvd and non-rsvd hugetlb cgroup charges. When map_chg is set, hugetlb_cgroup_charge_cgroup_rsvd() stores the charged cgroup in h_cg, but the immediately following hugetlb_cgroup_charge_cgroup() overwrites h_cg with the non-rsvd cgroup pointer. As a result, hugetlb_cgroup_commit_charge_rsvd() stores the wrong (non-rsvd) cgroup pointer into the folio's rsvd slot. When the folio is later freed, free_huge_folio() unconditionally calls both hugetlb_cgroup_uncharge_folio() and hugetlb_cgroup_uncharge_folio_rsvd(). The rsvd uncharge reads back the wrong cgroup from the folio and decrements a counter that was never charged for that cgroup, causing a page_counter underflow: page_counter underflow: -512 nr_pages=512 WARNING: mm/page_counter.c:61 at page_counter_cancel Fix this by introducing a separate h_cg_rsvd pointer exclusively for the rsvd charge path, keeping the rsvd and non-rsvd charges fully independent through their charge, commit, and error uncharge paths. | |||||
| CVE-2026-72212 | 2026-08-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: mm/memory_hotplug: fix incorrect altmap passing in error path In create_altmaps_and_memory_blocks(), when arch_add_memory() succeeds with memmap_on_memory enabled, the vmemmap pages are allocated from params.altmap. If create_memory_block_devices() subsequently fails, the error path calls arch_remove_memory() with a NULL altmap instead of params.altmap. This is a bug that could lead to memory corruption. Since altmap is NULL, vmemmap_free() falls back to freeing the vmemmap pages into the system buddy allocator via free_pages() instead of the altmap. arch_remove_memory() then immediately destroys the physical linear mapping for this memory. This injects unowned pages into the buddy allocator, causing machine checks or memory corruption if the system later attempts to allocate and use those freed pages. Fix this by passing params.altmap to arch_remove_memory() in the error path. | |||||
| CVE-2026-72209 | 2026-08-17 | N/A | 9.8 CRITICAL | ||
| In the Linux kernel, the following vulnerability has been resolved: ntfs: validate attribute values on lookup ntfs_attr_find() and ntfs_external_attr_find() check that generic resident attribute values fit in their attribute records and that fixed-size resident values are large enough. For variable-length resident formats, however, the fixed part is not enough: embedded length fields can still point callers past the resident value. A crafted image can set a small resident $FILE_NAME value_length while leaving file_name_length large. Callers then trust file_name_length and read past the resident value when converting or comparing the name. This was reproduced with a crafted image under KASAN as a slab-out-of-bounds read from the kmalloc-1k MFT record copy. The stack included ntfs_lookup(), ntfs_iget(), ntfs_read_locked_inode(), ntfs_attr_name_get(), ntfs_ucstonls(), and utf16s_to_utf8s(). Add a shared attribute value validator and use it before a lookup path can return an attribute, including the AT_UNUSED enumeration case where callers inspect returned attributes directly. The helper validates resident value bounds, minimum resident value sizes, variable-length $FILE_NAME fields, and non-resident mapping-pairs metadata that was previously checked separately in both lookup paths. This also preserves the intended resident @val matching semantics in the external attribute lookup path. The old duplicated validation block overwrote the actual resident value length with the type-specific minimum length before comparing @val, so variable-length resident values could fail to match even when the bytes were identical. Keep the comparison on the actual value length, and make ntfs_attrlist_entry_add() compare resident attributes with lowest_vcn zero instead of reading the non-resident union member after a successful resident match. Reject non-resident $FILE_NAME records too: the format requires $FILE_NAME to be resident and callers treat returned records as resident. | |||||