Total
19639 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-38317 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix buffer overflow in debugfs If the user tries to write more than 32 bytes then it results in memory corruption. Fortunately, this is debugfs so it's limited to root users. | |||||
| CVE-2025-38293 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix node corruption in ar->arvifs list In current WLAN recovery code flow, ath11k_core_halt() only reinitializes the "arvifs" list head. This will cause the list node immediately following the list head to become an invalid list node. Because the prev of that node still points to the list head "arvifs", but the next of the list head "arvifs" no longer points to that list node. When a WLAN recovery occurs during the execution of a vif removal, and it happens before the spin_lock_bh(&ar->data_lock) in ath11k_mac_op_remove_interface(), list_del() will detect the previously mentioned situation, thereby triggering a kernel panic. The fix is to remove and reinitialize all vif list nodes from the list head "arvifs" during WLAN halt. The reinitialization is to make the list nodes valid, ensuring that the list_del() in ath11k_mac_op_remove_interface() can execute normally. Call trace: __list_del_entry_valid_or_report+0xb8/0xd0 ath11k_mac_op_remove_interface+0xb0/0x27c [ath11k] drv_remove_interface+0x48/0x194 [mac80211] ieee80211_do_stop+0x6e0/0x844 [mac80211] ieee80211_stop+0x44/0x17c [mac80211] __dev_close_many+0xac/0x150 __dev_change_flags+0x194/0x234 dev_change_flags+0x24/0x6c devinet_ioctl+0x3a0/0x670 inet_ioctl+0x200/0x248 sock_do_ioctl+0x60/0x118 sock_ioctl+0x274/0x35c __arm64_sys_ioctl+0xac/0xf0 invoke_syscall+0x48/0x114 ... Tested-on: QCA6698AQ hw2.1 PCI WLAN.HSP.1.1-04591-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 | |||||
| CVE-2025-38291 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Prevent sending WMI commands to firmware during firmware crash Currently, we encounter the following kernel call trace when a firmware crash occurs. This happens because the host sends WMI commands to the firmware while it is in recovery, causing the commands to fail and resulting in the kernel call trace. Set the ATH12K_FLAG_CRASH_FLUSH and ATH12K_FLAG_RECOVERY flags when the host driver receives the firmware crash notification from MHI. This prevents sending WMI commands to the firmware during recovery. Call Trace: <TASK> dump_stack_lvl+0x75/0xc0 register_lock_class+0x6be/0x7a0 ? __lock_acquire+0x644/0x19a0 __lock_acquire+0x95/0x19a0 lock_acquire+0x265/0x310 ? ath12k_ce_send+0xa2/0x210 [ath12k] ? find_held_lock+0x34/0xa0 ? ath12k_ce_send+0x56/0x210 [ath12k] _raw_spin_lock_bh+0x33/0x70 ? ath12k_ce_send+0xa2/0x210 [ath12k] ath12k_ce_send+0xa2/0x210 [ath12k] ath12k_htc_send+0x178/0x390 [ath12k] ath12k_wmi_cmd_send_nowait+0x76/0xa0 [ath12k] ath12k_wmi_cmd_send+0x62/0x190 [ath12k] ath12k_wmi_pdev_bss_chan_info_request+0x62/0xc0 [ath1 ath12k_mac_op_get_survey+0x2be/0x310 [ath12k] ieee80211_dump_survey+0x99/0x240 [mac80211] nl80211_dump_survey+0xe7/0x470 [cfg80211] ? kmalloc_reserve+0x59/0xf0 genl_dumpit+0x24/0x70 netlink_dump+0x177/0x360 __netlink_dump_start+0x206/0x280 genl_family_rcv_msg_dumpit.isra.22+0x8a/0xe0 ? genl_family_rcv_msg_attrs_parse.isra.23+0xe0/0xe0 ? genl_op_lock.part.12+0x10/0x10 ? genl_dumpit+0x70/0x70 genl_rcv_msg+0x1d0/0x290 ? nl80211_del_station+0x330/0x330 [cfg80211] ? genl_get_cmd_both+0x50/0x50 netlink_rcv_skb+0x4f/0x100 genl_rcv+0x1f/0x30 netlink_unicast+0x1b6/0x260 netlink_sendmsg+0x31a/0x450 __sock_sendmsg+0xa8/0xb0 ____sys_sendmsg+0x1e4/0x260 ___sys_sendmsg+0x89/0xe0 ? local_clock_noinstr+0xb/0xc0 ? rcu_is_watching+0xd/0x40 ? kfree+0x1de/0x370 ? __sys_sendmsg+0x7a/0xc0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 | |||||
| CVE-2025-38290 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix node corruption in ar->arvifs list In current WLAN recovery code flow, ath12k_core_halt() only reinitializes the "arvifs" list head. This will cause the list node immediately following the list head to become an invalid list node. Because the prev of that node still points to the list head "arvifs", but the next of the list head "arvifs" no longer points to that list node. When a WLAN recovery occurs during the execution of a vif removal, and it happens before the spin_lock_bh(&ar->data_lock) in ath12k_mac_vdev_delete(), list_del() will detect the previously mentioned situation, thereby triggering a kernel panic. The fix is to remove and reinitialize all vif list nodes from the list head "arvifs" during WLAN halt. The reinitialization is to make the list nodes valid, ensuring that the list_del() in ath12k_mac_vdev_delete() can execute normally. Call trace: __list_del_entry_valid_or_report+0xd4/0x100 (P) ath12k_mac_remove_link_interface.isra.0+0xf8/0x2e4 [ath12k] ath12k_scan_vdev_clean_work+0x40/0x164 [ath12k] cfg80211_wiphy_work+0xfc/0x100 process_one_work+0x164/0x2d0 worker_thread+0x254/0x380 kthread+0xfc/0x100 ret_from_fork+0x10/0x20 The change is mostly copied from the ath11k patch: https://lore.kernel.org/all/20250320053145.3445187-1-quic_stonez@quicinc.com/ Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 | |||||
| CVE-2025-38278 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback This patch addresses below issues, 1. Active traffic on the leaf node must be stopped before its send queue is reassigned to the parent. This patch resolves the issue by marking the node as 'Inner'. 2. During a system reboot, the interface receives TC_HTB_LEAF_DEL and TC_HTB_LEAF_DEL_LAST callbacks to delete its HTB queues. In the case of TC_HTB_LEAF_DEL_LAST, although the same send queue is reassigned to the parent, the current logic still attempts to update the real number of queues, leadning to below warnings New queues can't be registered after device unregistration. WARNING: CPU: 0 PID: 6475 at net/core/net-sysfs.c:1714 netdev_queue_update_kobjects+0x1e4/0x200 | |||||
| CVE-2025-38270 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: drv: netdevsim: don't napi_complete() from netpoll netdevsim supports netpoll. Make sure we don't call napi_complete() from it, since it may not be scheduled. Breno reports hitting a warning in napi_complete_done(): WARNING: CPU: 14 PID: 104 at net/core/dev.c:6592 napi_complete_done+0x2cc/0x560 __napi_poll+0x2d8/0x3a0 handle_softirqs+0x1fe/0x710 This is presumably after netpoll stole the SCHED bit prematurely. | |||||
| CVE-2025-38262 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: uartlite: register uart driver in init When two instances of uart devices are probing, a concurrency race can occur. If one thread calls uart_register_driver function, which first allocates and assigns memory to 'uart_state' member of uart_driver structure, the other instance can bypass uart driver registration and call ulite_assign. This calls uart_add_one_port, which expects the uart driver to be fully initialized. This leads to a kernel panic due to a null pointer dereference: [ 8.143581] BUG: kernel NULL pointer dereference, address: 00000000000002b8 [ 8.156982] #PF: supervisor write access in kernel mode [ 8.156984] #PF: error_code(0x0002) - not-present page [ 8.156986] PGD 0 P4D 0 ... [ 8.180668] RIP: 0010:mutex_lock+0x19/0x30 [ 8.188624] Call Trace: [ 8.188629] ? __die_body.cold+0x1a/0x1f [ 8.195260] ? page_fault_oops+0x15c/0x290 [ 8.209183] ? __irq_resolve_mapping+0x47/0x80 [ 8.209187] ? exc_page_fault+0x64/0x140 [ 8.209190] ? asm_exc_page_fault+0x22/0x30 [ 8.209196] ? mutex_lock+0x19/0x30 [ 8.223116] uart_add_one_port+0x60/0x440 [ 8.223122] ? proc_tty_register_driver+0x43/0x50 [ 8.223126] ? tty_register_driver+0x1ca/0x1e0 [ 8.246250] ulite_probe+0x357/0x4b0 [uartlite] To prevent it, move uart driver registration in to init function. This will ensure that uart_driver is always registered when probe function is called. | |||||
| CVE-2025-38257 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 7.3 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Prevent overflow in size calculation for memdup_user() Number of apqn target list entries contained in 'nr_apqns' variable is determined by userspace via an ioctl call so the result of the product in calculation of size passed to memdup_user() may overflow. In this case the actual size of the allocated area and the value describing it won't be in sync leading to various types of unpredictable behaviour later. Use a proper memdup_array_user() helper which returns an error if an overflow is detected. Note that it is different from when nr_apqns is initially zero - that case is considered valid and should be handled in subsequent pkey_handler implementations. Found by Linux Verification Center (linuxtesting.org). | |||||
| CVE-2025-38253 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix crash in wacom_aes_battery_handler() Commit fd2a9b29dc9c ("HID: wacom: Remove AES power_supply after extended inactivity") introduced wacom_aes_battery_handler() which is scheduled as a delayed work (aes_battery_work). In wacom_remove(), aes_battery_work is not canceled. Consequently, if the device is removed while aes_battery_work is still pending, then hard crashes or "Oops: general protection fault..." are experienced when wacom_aes_battery_handler() is finally called. E.g., this happens with built-in USB devices after resume from hibernate when aes_battery_work was still pending at the time of hibernation. So, take care to cancel aes_battery_work in wacom_remove(). | |||||
| CVE-2025-38250 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_core: Fix use-after-free in vhci_flush() syzbot reported use-after-free in vhci_flush() without repro. [0] From the splat, a thread close()d a vhci file descriptor while its device was being used by iotcl() on another thread. Once the last fd refcnt is released, vhci_release() calls hci_unregister_dev(), hci_free_dev(), and kfree() for struct vhci_data, which is set to hci_dev->dev->driver_data. The problem is that there is no synchronisation after unlinking hdev from hci_dev_list in hci_unregister_dev(). There might be another thread still accessing the hdev which was fetched before the unlink operation. We can use SRCU for such synchronisation. Let's run hci_dev_reset() under SRCU and wait for its completion in hci_unregister_dev(). Another option would be to restore hci_dev->destruct(), which was removed in commit 587ae086f6e4 ("Bluetooth: Remove unused hci-destruct cb"). However, this would not be a good solution, as we should not run hci_unregister_dev() while there are in-flight ioctl() requests, which could lead to another data-race KCSAN splat. Note that other drivers seem to have the same problem, for exmaple, virtbt_remove(). [0]: BUG: KASAN: slab-use-after-free in skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline] BUG: KASAN: slab-use-after-free in skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937 Read of size 8 at addr ffff88807cb8d858 by task syz.1.219/6718 CPU: 1 UID: 0 PID: 6718 Comm: syz.1.219 Not tainted 6.16.0-rc1-syzkaller-00196-g08207f42d3ff #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025 Call Trace: <TASK> dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xd2/0x2b0 mm/kasan/report.c:521 kasan_report+0x118/0x150 mm/kasan/report.c:634 skb_queue_empty_lockless include/linux/skbuff.h:1891 [inline] skb_queue_purge_reason+0x99/0x360 net/core/skbuff.c:3937 skb_queue_purge include/linux/skbuff.h:3368 [inline] vhci_flush+0x44/0x50 drivers/bluetooth/hci_vhci.c:69 hci_dev_do_reset net/bluetooth/hci_core.c:552 [inline] hci_dev_reset+0x420/0x5c0 net/bluetooth/hci_core.c:592 sock_do_ioctl+0xd9/0x300 net/socket.c:1190 sock_ioctl+0x576/0x790 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fcf5b98e929 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fcf5c7b9038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fcf5bbb6160 RCX: 00007fcf5b98e929 RDX: 0000000000000000 RSI: 00000000400448cb RDI: 0000000000000009 RBP: 00007fcf5ba10b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007fcf5bbb6160 R15: 00007ffd6353d528 </TASK> Allocated by task 6535: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x230/0x3d0 mm/slub.c:4359 kmalloc_noprof include/linux/slab.h:905 [inline] kzalloc_noprof include/linux/slab.h:1039 [inline] vhci_open+0x57/0x360 drivers/bluetooth/hci_vhci.c:635 misc_open+0x2bc/0x330 drivers/char/misc.c:161 chrdev_open+0x4c9/0x5e0 fs/char_dev.c:414 do_dentry_open+0xdf0/0x1970 fs/open.c:964 vfs_open+0x3b/0x340 fs/open.c:1094 do_open fs/namei.c:3887 [inline] path_openat+0x2ee5/0x3830 fs/name ---truncated--- | |||||
| CVE-2025-38239 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 7.3 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: scsi: megaraid_sas: Fix invalid node index On a system with DRAM interleave enabled, out-of-bound access is detected: megaraid_sas 0000:3f:00.0: requested/available msix 128/128 poll_queue 0 ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x2b __ubsan_handle_out_of_bounds.cold+0x46/0x4b megasas_alloc_irq_vectors+0x149/0x190 [megaraid_sas] megasas_probe_one.cold+0xa4d/0x189c [megaraid_sas] local_pci_probe+0x42/0x90 pci_device_probe+0xdc/0x290 really_probe+0xdb/0x340 __driver_probe_device+0x78/0x110 driver_probe_device+0x1f/0xa0 __driver_attach+0xba/0x1c0 bus_for_each_dev+0x8b/0xe0 bus_add_driver+0x142/0x220 driver_register+0x72/0xd0 megasas_init+0xdf/0xff0 [megaraid_sas] do_one_initcall+0x57/0x310 do_init_module+0x90/0x250 init_module_from_file+0x85/0xc0 idempotent_init_module+0x114/0x310 __x64_sys_finit_module+0x65/0xc0 do_syscall_64+0x82/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix it accordingly. | |||||
| CVE-2025-38238 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: scsi: fnic: Fix crash in fnic_wq_cmpl_handler when FDMI times out When both the RHBA and RPA FDMI requests time out, fnic reuses a frame to send ABTS for each of them. On send completion, this causes an attempt to free the same frame twice that leads to a crash. Fix crash by allocating separate frames for RHBA and RPA, and modify ABTS logic accordingly. Tested by checking MDS for FDMI information. Tested by using instrumented driver to: - Drop PLOGI response - Drop RHBA response - Drop RPA response - Drop RHBA and RPA response - Drop PLOGI response + ABTS response - Drop RHBA response + ABTS response - Drop RPA response + ABTS response - Drop RHBA and RPA response + ABTS response for both of them | |||||
| CVE-2025-38216 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Restore context entry setup order for aliased devices Commit 2031c469f816 ("iommu/vt-d: Add support for static identity domain") changed the context entry setup during domain attachment from a set-and-check policy to a clear-and-reset approach. This inadvertently introduced a regression affecting PCI aliased devices behind PCIe-to-PCI bridges. Specifically, keyboard and touchpad stopped working on several Apple Macbooks with below messages: kernel: platform pxa2xx-spi.3: Adding to iommu group 20 kernel: input: Apple SPI Keyboard as /devices/pci0000:00/0000:00:1e.3/pxa2xx-spi.3/spi_master/spi2/spi-APP000D:00/input/input0 kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00 kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read NO_PASID] Request device [00:1e.3] fault addr 0xffffa000 [fault reason 0x06] PTE Read access is not set kernel: DMAR: DRHD: handling fault status reg 3 kernel: applespi spi-APP000D:00: Error writing to device: 01 0e 00 00 Fix this by restoring the previous context setup order. | |||||
| CVE-2025-38212 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ipc: fix to protect IPCS lookups using RCU syzbot reported that it discovered a use-after-free vulnerability, [0] [0]: https://lore.kernel.org/all/67af13f8.050a0220.21dd3.0038.GAE@google.com/ idr_for_each() is protected by rwsem, but this is not enough. If it is not protected by RCU read-critical region, when idr_for_each() calls radix_tree_node_free() through call_rcu() to free the radix_tree_node structure, the node will be freed immediately, and when reading the next node in radix_tree_for_each_slot(), the already freed memory may be read. Therefore, we need to add code to make sure that idr_for_each() is protected within the RCU read-critical region when we call it in shm_destroy_orphaned(). | |||||
| CVE-2025-38209 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: remove tag set when second admin queue config fails Commit 104d0e2f6222 ("nvme-fabrics: reset admin connection for secure concatenation") modified nvme_tcp_setup_ctrl() to call nvme_tcp_configure_admin_queue() twice. The first call prepares for DH-CHAP negotitation, and the second call is required for secure concatenation. However, this change triggered BUG KASAN slab-use-after- free in blk_mq_queue_tag_busy_iter(). This BUG can be recreated by repeating the blktests test case nvme/063 a few times [1]. When the BUG happens, nvme_tcp_create_ctrl() fails in the call chain below: nvme_tcp_create_ctrl() nvme_tcp_alloc_ctrl() new=true ... Alloc nvme_tcp_ctrl and admin_tag_set nvme_tcp_setup_ctrl() new=true nvme_tcp_configure_admin_queue() new=true ... Succeed nvme_alloc_admin_tag_set() ... Alloc the tag set for admin_tag_set nvme_stop_keep_alive() nvme_tcp_teardown_admin_queue() remove=false nvme_tcp_configure_admin_queue() new=false nvme_tcp_alloc_admin_queue() ... Fail, but do not call nvme_remove_admin_tag_set() nvme_uninit_ctrl() nvme_put_ctrl() ... Free up the nvme_tcp_ctrl and admin_tag_set The first call of nvme_tcp_configure_admin_queue() succeeds with new=true argument. The second call fails with new=false argument. This second call does not call nvme_remove_admin_tag_set() on failure, due to the new=false argument. Then the admin tag set is not removed. However, nvme_tcp_create_ctrl() assumes that nvme_tcp_setup_ctrl() would call nvme_remove_admin_tag_set(). Then it frees up struct nvme_tcp_ctrl which has admin_tag_set field. Later on, the timeout handler accesses the admin_tag_set field and causes the BUG KASAN slab-use-after-free. To not leave the admin tag set, call nvme_remove_admin_tag_set() when the second nvme_tcp_configure_admin_queue() call fails. Do not return from nvme_tcp_setup_ctrl() on failure. Instead, jump to "destroy_admin" go-to label to call nvme_tcp_teardown_admin_queue() which calls nvme_remove_admin_tag_set(). | |||||
| CVE-2025-38197 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 7.3 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell_rbu: Fix list usage Pass the correct list head to list_for_each_entry*() when looping through the packet list. Without this patch, reading the packet data via sysfs will show the data incorrectly (because it starts at the wrong packet), and clearing the packet list will result in a NULL pointer dereference. | |||||
| CVE-2025-38193 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net_sched: sch_sfq: reject invalid perturb period Gerrard Tai reported that SFQ perturb_period has no range check yet, and this can be used to trigger a race condition fixed in a separate patch. We want to make sure ctl->perturb_period * HZ will not overflow and is positive. tc qd add dev lo root sfq perturb -10 # negative value : error Error: sch_sfq: invalid perturb period. tc qd add dev lo root sfq perturb 1000000000 # too big : error Error: sch_sfq: invalid perturb period. tc qd add dev lo root sfq perturb 2000000 # acceptable value tc -s -d qd sh dev lo qdisc sfq 8005: root refcnt 2 limit 127p quantum 64Kb depth 127 flows 128 divisor 1024 perturb 2000000sec Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 | |||||
| CVE-2025-38192 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net: clear the dst when changing skb protocol A not-so-careful NAT46 BPF program can crash the kernel if it indiscriminately flips ingress packets from v4 to v6: BUG: kernel NULL pointer dereference, address: 0000000000000000 ip6_rcv_core (net/ipv6/ip6_input.c:190:20) ipv6_rcv (net/ipv6/ip6_input.c:306:8) process_backlog (net/core/dev.c:6186:4) napi_poll (net/core/dev.c:6906:9) net_rx_action (net/core/dev.c:7028:13) do_softirq (kernel/softirq.c:462:3) netif_rx (net/core/dev.c:5326:3) dev_loopback_xmit (net/core/dev.c:4015:2) ip_mc_finish_output (net/ipv4/ip_output.c:363:8) NF_HOOK (./include/linux/netfilter.h:314:9) ip_mc_output (net/ipv4/ip_output.c:400:5) dst_output (./include/net/dst.h:459:9) ip_local_out (net/ipv4/ip_output.c:130:9) ip_send_skb (net/ipv4/ip_output.c:1496:8) udp_send_skb (net/ipv4/udp.c:1040:8) udp_sendmsg (net/ipv4/udp.c:1328:10) The output interface has a 4->6 program attached at ingress. We try to loop the multicast skb back to the sending socket. Ingress BPF runs as part of netif_rx(), pushes a valid v6 hdr and changes skb->protocol to v6. We enter ip6_rcv_core which tries to use skb_dst(). But the dst is still an IPv4 one left after IPv4 mcast output. Clear the dst in all BPF helpers which change the protocol. Try to preserve metadata dsts, those may carry non-routing metadata. | |||||
| CVE-2025-38184 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearer The reproduction steps: 1. create a tun interface 2. enable l2 bearer 3. TIPC_NL_UDP_GET_REMOTEIP with media name set to tun tipc: Started in network mode tipc: Node identity 8af312d38a21, cluster identity 4711 tipc: Enabled bearer <eth:syz_tun>, priority 1 Oops: general protection fault KASAN: null-ptr-deref in range CPU: 1 UID: 1000 PID: 559 Comm: poc Not tainted 6.16.0-rc1+ #117 PREEMPT Hardware name: QEMU Ubuntu 24.04 PC RIP: 0010:tipc_udp_nl_dump_remoteip+0x4a4/0x8f0 the ub was in fact a struct dev. when bid != 0 && skip_cnt != 0, bearer_list[bid] may be NULL or other media when other thread changes it. fix this by checking media_id. | |||||
| CVE-2025-38181 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: calipso: Fix null-ptr-deref in calipso_req_{set,del}attr(). syzkaller reported a null-ptr-deref in sock_omalloc() while allocating a CALIPSO option. [0] The NULL is of struct sock, which was fetched by sk_to_full_sk() in calipso_req_setattr(). Since commit a1a5344ddbe8 ("tcp: avoid two atomic ops for syncookies"), reqsk->rsk_listener could be NULL when SYN Cookie is returned to its client, as hinted by the leading SYN Cookie log. Here are 3 options to fix the bug: 1) Return 0 in calipso_req_setattr() 2) Return an error in calipso_req_setattr() 3) Alaways set rsk_listener 1) is no go as it bypasses LSM, but 2) effectively disables SYN Cookie for CALIPSO. 3) is also no go as there have been many efforts to reduce atomic ops and make TCP robust against DDoS. See also commit 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood"). As of the blamed commit, SYN Cookie already did not need refcounting, and no one has stumbled on the bug for 9 years, so no CALIPSO user will care about SYN Cookie. Let's return an error in calipso_req_setattr() and calipso_req_delattr() in the SYN Cookie case. This can be reproduced by [1] on Fedora and now connect() of nc times out. [0]: TCP: request_sock_TCPv6: Possible SYN flooding on port [::]:20002. Sending cookies. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 3 UID: 0 PID: 12262 Comm: syz.1.2611 Not tainted 6.14.0 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:406 [inline] RIP: 0010:sock_net include/net/sock.h:655 [inline] RIP: 0010:sock_kmalloc+0x35/0x170 net/core/sock.c:2806 Code: 89 d5 41 54 55 89 f5 53 48 89 fb e8 25 e3 c6 fd e8 f0 91 e3 00 48 8d 7b 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 26 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b RSP: 0018:ffff88811af89038 EFLAGS: 00010216 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffff888105266400 RDX: 0000000000000006 RSI: ffff88800c890000 RDI: 0000000000000030 RBP: 0000000000000050 R08: 0000000000000000 R09: ffff88810526640e R10: ffffed1020a4cc81 R11: ffff88810526640f R12: 0000000000000000 R13: 0000000000000820 R14: ffff888105266400 R15: 0000000000000050 FS: 00007f0653a07640(0000) GS:ffff88811af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f863ba096f4 CR3: 00000000163c0005 CR4: 0000000000770ef0 PKRU: 80000000 Call Trace: <IRQ> ipv6_renew_options+0x279/0x950 net/ipv6/exthdrs.c:1288 calipso_req_setattr+0x181/0x340 net/ipv6/calipso.c:1204 calipso_req_setattr+0x56/0x80 net/netlabel/netlabel_calipso.c:597 netlbl_req_setattr+0x18a/0x440 net/netlabel/netlabel_kapi.c:1249 selinux_netlbl_inet_conn_request+0x1fb/0x320 security/selinux/netlabel.c:342 selinux_inet_conn_request+0x1eb/0x2c0 security/selinux/hooks.c:5551 security_inet_conn_request+0x50/0xa0 security/security.c:4945 tcp_v6_route_req+0x22c/0x550 net/ipv6/tcp_ipv6.c:825 tcp_conn_request+0xec8/0x2b70 net/ipv4/tcp_input.c:7275 tcp_v6_conn_request+0x1e3/0x440 net/ipv6/tcp_ipv6.c:1328 tcp_rcv_state_process+0xafa/0x52b0 net/ipv4/tcp_input.c:6781 tcp_v6_do_rcv+0x8a6/0x1a40 net/ipv6/tcp_ipv6.c:1667 tcp_v6_rcv+0x505e/0x5b50 net/ipv6/tcp_ipv6.c:1904 ip6_protocol_deliver_rcu+0x17c/0x1da0 net/ipv6/ip6_input.c:436 ip6_input_finish+0x103/0x180 net/ipv6/ip6_input.c:480 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netfilter.h:308 [inline] ip6_input+0x13c/0x6b0 net/ipv6/ip6_input.c:491 dst_input include/net/dst.h:469 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] ip6_rcv_finish+0xb6/0x490 net/ipv6/ip6_input.c:69 NF_HOOK include/linux/netfilter.h:314 [inline] NF_HOOK include/linux/netf ---truncated--- | |||||