Total
19639 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-38601 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: clear initialized flag for deinit-ed srng lists In a number of cases we see kernel panics on resume due to ath11k kernel page fault, which happens under the following circumstances: 1) First ath11k_hal_dump_srng_stats() call Last interrupt received for each group: ath11k_pci 0000:01:00.0: group_id 0 22511ms before ath11k_pci 0000:01:00.0: group_id 1 14440788ms before [..] ath11k_pci 0000:01:00.0: failed to receive control response completion, polling.. ath11k_pci 0000:01:00.0: Service connect timeout ath11k_pci 0000:01:00.0: failed to connect to HTT: -110 ath11k_pci 0000:01:00.0: failed to start core: -110 ath11k_pci 0000:01:00.0: firmware crashed: MHI_CB_EE_RDDM ath11k_pci 0000:01:00.0: already resetting count 2 ath11k_pci 0000:01:00.0: failed to wait wlan mode request (mode 4): -110 ath11k_pci 0000:01:00.0: qmi failed to send wlan mode off: -110 ath11k_pci 0000:01:00.0: failed to reconfigure driver on crash recovery [..] 2) At this point reconfiguration fails (we have 2 resets) and ath11k_core_reconfigure_on_crash() calls ath11k_hal_srng_deinit() which destroys srng lists. However, it does not reset per-list ->initialized flag. 3) Second ath11k_hal_dump_srng_stats() call sees stale ->initialized flag and attempts to dump srng stats: Last interrupt received for each group: ath11k_pci 0000:01:00.0: group_id 0 66785ms before ath11k_pci 0000:01:00.0: group_id 1 14485062ms before ath11k_pci 0000:01:00.0: group_id 2 14485062ms before ath11k_pci 0000:01:00.0: group_id 3 14485062ms before ath11k_pci 0000:01:00.0: group_id 4 14780845ms before ath11k_pci 0000:01:00.0: group_id 5 14780845ms before ath11k_pci 0000:01:00.0: group_id 6 14485062ms before ath11k_pci 0000:01:00.0: group_id 7 66814ms before ath11k_pci 0000:01:00.0: group_id 8 68997ms before ath11k_pci 0000:01:00.0: group_id 9 67588ms before ath11k_pci 0000:01:00.0: group_id 10 69511ms before BUG: unable to handle page fault for address: ffffa007404eb010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 100000067 P4D 100000067 PUD 10022d067 PMD 100b01067 PTE 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k] Call Trace: <TASK> ? __die_body+0xae/0xb0 ? page_fault_oops+0x381/0x3e0 ? exc_page_fault+0x69/0xa0 ? asm_exc_page_fault+0x22/0x30 ? ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k (HASH:6cea 4)] ath11k_qmi_driver_event_work+0xbd/0x1050 [ath11k (HASH:6cea 4)] worker_thread+0x389/0x930 kthread+0x149/0x170 Clear per-list ->initialized flag in ath11k_hal_srng_deinit(). | |||||
| CVE-2025-38593 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: fix double free in 'hci_discovery_filter_clear()' Function 'hci_discovery_filter_clear()' frees 'uuids' array and then sets it to NULL. There is a tiny chance of the following race: 'hci_cmd_sync_work()' 'update_passive_scan_sync()' 'hci_update_passive_scan_sync()' 'hci_discovery_filter_clear()' kfree(uuids); <-------------------------preempted--------------------------------> 'start_service_discovery()' 'hci_discovery_filter_clear()' kfree(uuids); // DOUBLE FREE <-------------------------preempted--------------------------------> uuids = NULL; To fix it let's add locking around 'kfree()' call and NULL pointer assignment. Otherwise the following backtrace fires: [ ] ------------[ cut here ]------------ [ ] kernel BUG at mm/slub.c:547! [ ] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP [ ] CPU: 3 UID: 0 PID: 246 Comm: bluetoothd Tainted: G O 6.12.19-kernel #1 [ ] Tainted: [O]=OOT_MODULE [ ] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ ] pc : __slab_free+0xf8/0x348 [ ] lr : __slab_free+0x48/0x348 ... [ ] Call trace: [ ] __slab_free+0xf8/0x348 [ ] kfree+0x164/0x27c [ ] start_service_discovery+0x1d0/0x2c0 [ ] hci_sock_sendmsg+0x518/0x924 [ ] __sock_sendmsg+0x54/0x60 [ ] sock_write_iter+0x98/0xf8 [ ] do_iter_readv_writev+0xe4/0x1c8 [ ] vfs_writev+0x128/0x2b0 [ ] do_writev+0xfc/0x118 [ ] __arm64_sys_writev+0x20/0x2c [ ] invoke_syscall+0x68/0xf0 [ ] el0_svc_common.constprop.0+0x40/0xe0 [ ] do_el0_svc+0x1c/0x28 [ ] el0_svc+0x30/0xd0 [ ] el0t_64_sync_handler+0x100/0x12c [ ] el0t_64_sync+0x194/0x198 [ ] Code: 8b0002e6 eb17031f 54fffbe1 d503201f (d4210000) [ ] ---[ end trace 0000000000000000 ]--- | |||||
| CVE-2025-38586 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Fix fp initialization for exception boundary In the ARM64 BPF JIT when prog->aux->exception_boundary is set for a BPF program, find_used_callee_regs() is not called because for a program acting as exception boundary, all callee saved registers are saved. find_used_callee_regs() sets `ctx->fp_used = true;` when it sees FP being used in any of the instructions. For programs acting as exception boundary, ctx->fp_used remains false even if frame pointer is used by the program and therefore, FP is not set-up for such programs in the prologue. This can cause the kernel to crash due to a pagefault. Fix it by setting ctx->fp_used = true for exception boundary programs as fp is always saved in such programs. | |||||
| CVE-2025-38584 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: padata: Fix pd UAF once and for all There is a race condition/UAF in padata_reorder that goes back to the initial commit. A reference count is taken at the start of the process in padata_do_parallel, and released at the end in padata_serial_worker. This reference count is (and only is) required for padata_replace to function correctly. If padata_replace is never called then there is no issue. In the function padata_reorder which serves as the core of padata, as soon as padata is added to queue->serial.list, and the associated spin lock released, that padata may be processed and the reference count on pd would go away. Fix this by getting the next padata before the squeue->serial lock is released. In order to make this possible, simplify padata_reorder by only calling it once the next padata arrives. | |||||
| CVE-2025-38574 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 8.6 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: pptp: ensure minimal skb length in pptp_xmit() Commit aabc6596ffb3 ("net: ppp: Add bound checking for skb data on ppp_sync_txmung") fixed ppp_sync_txmunge() We need a similar fix in pptp_xmit(), otherwise we might read uninit data as reported by syzbot. BUG: KMSAN: uninit-value in pptp_xmit+0xc34/0x2720 drivers/net/ppp/pptp.c:193 pptp_xmit+0xc34/0x2720 drivers/net/ppp/pptp.c:193 ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2290 [inline] ppp_input+0x1d6/0xe60 drivers/net/ppp/ppp_generic.c:2314 pppoe_rcv_core+0x1e8/0x760 drivers/net/ppp/pppoe.c:379 sk_backlog_rcv+0x142/0x420 include/net/sock.h:1148 __release_sock+0x1d3/0x330 net/core/sock.c:3213 release_sock+0x6b/0x270 net/core/sock.c:3767 pppoe_sendmsg+0x15d/0xcb0 drivers/net/ppp/pppoe.c:904 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x330/0x3d0 net/socket.c:727 ____sys_sendmsg+0x893/0xd80 net/socket.c:2566 ___sys_sendmsg+0x271/0x3b0 net/socket.c:2620 __sys_sendmmsg+0x2d9/0x7c0 net/socket.c:2709 | |||||
| CVE-2025-38571 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 8.2 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix client side handling of tls alerts A security exploit was discovered in NFS over TLS in tls_alert_recv due to its assumption that there is valid data in the msghdr's iterator's kvec. Instead, this patch proposes the rework how control messages are setup and used by sock_recvmsg(). If no control message structure is setup, kTLS layer will read and process TLS data record types. As soon as it encounters a TLS control message, it would return an error. At that point, NFS can setup a kvec backed control buffer and read in the control message such as a TLS alert. Scott found that a msg iterator can advance the kvec pointer as a part of the copy process thus we need to revert the iterator before calling into the tls_alert_recv. | |||||
| CVE-2025-38566 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix handling of server side tls alerts Scott Mayhew discovered a security exploit in NFS over TLS in tls_alert_recv() due to its assumption it can read data from the msg iterator's kvec.. kTLS implementation splits TLS non-data record payload between the control message buffer (which includes the type such as TLS aler or TLS cipher change) and the rest of the payload (say TLS alert's level/description) which goes into the msg payload buffer. This patch proposes to rework how control messages are setup and used by sock_recvmsg(). If no control message structure is setup, kTLS layer will read and process TLS data record types. As soon as it encounters a TLS control message, it would return an error. At that point, NFS can setup a kvec backed msg buffer and read in the control message such as a TLS alert. Msg iterator can advance the kvec pointer as a part of the copy process thus we need to revert the iterator before calling into the tls_alert_recv. | |||||
| CVE-2025-38560 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 9.3 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: x86/sev: Evict cache lines during SNP memory validation An SNP cache coherency vulnerability requires a cache line eviction mitigation when validating memory after a page state change to private. The specific mitigation is to touch the first and last byte of each 4K page that is being validated. There is no need to perform the mitigation when performing a page state change to shared and rescinding validation. CPUID bit Fn8000001F_EBX[31] defines the COHERENCY_SFW_NO CPUID bit that, when set, indicates that the software mitigation for this vulnerability is not needed. Implement the mitigation and invoke it when validating memory (making it private) and the COHERENCY_SFW_NO bit is not set, indicating the SNP guest is vulnerable. | |||||
| CVE-2025-38552 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 9.4 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: plug races between subflow fail and subflow creation We have races similar to the one addressed by the previous patch between subflow failing and additional subflow creation. They are just harder to trigger. The solution is similar. Use a separate flag to track the condition 'socket state prevent any additional subflow creation' protected by the fallback lock. The socket fallback makes such flag true, and also receiving or sending an MP_FAIL option. The field 'allow_infinite_fallback' is now always touched under the relevant lock, we can drop the ONCE annotation on write. | |||||
| CVE-2025-38539 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Add down_write(trace_event_sem) when adding trace event When a module is loaded, it adds trace events defined by the module. It may also need to modify the modules trace printk formats to replace enum names with their values. If two modules are loaded at the same time, the adding of the event to the ftrace_events list can corrupt the walking of the list in the code that is modifying the printk format strings and crash the kernel. The addition of the event should take the trace_event_sem for write while it adds the new event. Also add a lockdep_assert_held() on that semaphore in __trace_add_event_dirs() as it iterates the list. | |||||
| CVE-2025-38528 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject %p% format string in bprintf-like helpers static const char fmt[] = "%p%"; bpf_trace_printk(fmt, sizeof(fmt)); The above BPF program isn't rejected and causes a kernel warning at runtime: Please remove unsupported %\x00 in format string WARNING: CPU: 1 PID: 7244 at lib/vsprintf.c:2680 format_decode+0x49c/0x5d0 This happens because bpf_bprintf_prepare skips over the second %, detected as punctuation, while processing %p. This patch fixes it by not skipping over punctuation. %\x00 is then processed in the next iteration and rejected. | |||||
| CVE-2025-38527 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free in cifs_oplock_break A race condition can occur in cifs_oplock_break() leading to a use-after-free of the cinode structure when unmounting: cifs_oplock_break() _cifsFileInfo_put(cfile) cifsFileInfo_put_final() cifs_sb_deactive() [last ref, start releasing sb] kill_sb() kill_anon_super() generic_shutdown_super() evict_inodes() dispose_list() evict() destroy_inode() call_rcu(&inode->i_rcu, i_callback) spin_lock(&cinode->open_file_lock) <- OK [later] i_callback() cifs_free_inode() kmem_cache_free(cinode) spin_unlock(&cinode->open_file_lock) <- UAF cifs_done_oplock_break(cinode) <- UAF The issue occurs when umount has already released its reference to the superblock. When _cifsFileInfo_put() calls cifs_sb_deactive(), this releases the last reference, triggering the immediate cleanup of all inodes under RCU. However, cifs_oplock_break() continues to access the cinode after this point, resulting in use-after-free. Fix this by holding an extra reference to the superblock during the entire oplock break operation. This ensures that the superblock and its inodes remain valid until the oplock break completes. | |||||
| CVE-2025-38526 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ice: add NULL check in eswitch lag check The function ice_lag_is_switchdev_running() is being called from outside of the LAG event handler code. This results in the lag->upper_netdev being NULL sometimes. To avoid a NULL-pointer dereference, there needs to be a check before it is dereferenced. | |||||
| CVE-2025-38514 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix oops due to non-existence of prealloc backlog struct If an AF_RXRPC service socket is opened and bound, but calls are preallocated, then rxrpc_alloc_incoming_call() will oops because the rxrpc_backlog struct doesn't get allocated until the first preallocation is made. Fix this by returning NULL from rxrpc_alloc_incoming_call() if there is no backlog struct. This will cause the incoming call to be aborted. | |||||
| CVE-2025-38512 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: prevent A-MSDU attacks in mesh networks This patch is a mitigation to prevent the A-MSDU spoofing vulnerability for mesh networks. The initial update to the IEEE 802.11 standard, in response to the FragAttacks, missed this case (CVE-2025-27558). It can be considered a variant of CVE-2020-24588 but for mesh networks. This patch tries to detect if a standard MSDU was turned into an A-MSDU by an adversary. This is done by parsing a received A-MSDU as a standard MSDU, calculating the length of the Mesh Control header, and seeing if the 6 bytes after this header equal the start of an rfc1042 header. If equal, this is a strong indication of an ongoing attack attempt. This defense was tested with mac80211_hwsim against a mesh network that uses an empty Mesh Address Extension field, i.e., when four addresses are used, and when using a 12-byte Mesh Address Extension field, i.e., when six addresses are used. Functionality of normal MSDUs and A-MSDUs was also tested, and confirmed working, when using both an empty and 12-byte Mesh Address Extension field. It was also tested with mac80211_hwsim that A-MSDU attacks in non-mesh networks keep being detected and prevented. Note that the vulnerability being patched, and the defense being implemented, was also discussed in the following paper and in the following IEEE 802.11 presentation: https://papers.mathyvanhoef.com/wisec2025.pdf https://mentor.ieee.org/802.11/dcn/25/11-25-0949-00-000m-a-msdu-mesh-spoof-protection.docx | |||||
| CVE-2025-38511 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Clear all LMTT pages on alloc Our LMEM buffer objects are not cleared by default on alloc and during VF provisioning we only setup LMTT PTEs for the actually provisioned LMEM range. But beyond that valid range we might leave some stale data that could either point to some other VFs allocations or even to the PF pages. Explicitly clear all new LMTT page to avoid the risk that a malicious VF would try to exploit that gap. While around add asserts to catch any undesired PTE overwrites and low-level debug traces to track LMTT PT life-cycle. (cherry picked from commit 3fae6918a3e27cce20ded2551f863fb05d4bef8d) | |||||
| CVE-2025-38505 | 1 Linux | 1 Linux Kernel | 2026-10-15 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: discard erroneous disassoc frames on STA interface When operating in concurrent STA/AP mode with host MLME enabled, the firmware incorrectly sends disassociation frames to the STA interface when clients disconnect from the AP interface. This causes kernel warnings as the STA interface processes disconnect events that don't apply to it: [ 1303.240540] WARNING: CPU: 0 PID: 513 at net/wireless/mlme.c:141 cfg80211_process_disassoc+0x78/0xec [cfg80211] [ 1303.250861] Modules linked in: 8021q garp stp mrp llc rfcomm bnep btnxpuart nls_iso8859_1 nls_cp437 onboard_us [ 1303.327651] CPU: 0 UID: 0 PID: 513 Comm: kworker/u9:2 Not tainted 6.16.0-rc1+ #3 PREEMPT [ 1303.335937] Hardware name: Toradex Verdin AM62 WB on Verdin Development Board (DT) [ 1303.343588] Workqueue: MWIFIEX_RX_WORK_QUEUE mwifiex_rx_work_queue [mwifiex] [ 1303.350856] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1303.357904] pc : cfg80211_process_disassoc+0x78/0xec [cfg80211] [ 1303.364065] lr : cfg80211_process_disassoc+0x70/0xec [cfg80211] [ 1303.370221] sp : ffff800083053be0 [ 1303.373590] x29: ffff800083053be0 x28: 0000000000000000 x27: 0000000000000000 [ 1303.380855] x26: 0000000000000000 x25: 00000000ffffffff x24: ffff000002c5b8ae [ 1303.388120] x23: ffff000002c5b884 x22: 0000000000000001 x21: 0000000000000008 [ 1303.395382] x20: ffff000002c5b8ae x19: ffff0000064dd408 x18: 0000000000000006 [ 1303.402646] x17: 3a36333a61623a30 x16: 32206d6f72662063 x15: ffff800080bfe048 [ 1303.409910] x14: ffff000003625300 x13: 0000000000000001 x12: 0000000000000000 [ 1303.417173] x11: 0000000000000002 x10: ffff000003958600 x9 : ffff000003625300 [ 1303.424434] x8 : ffff00003fd9ef40 x7 : ffff0000039fc280 x6 : 0000000000000002 [ 1303.431695] x5 : ffff0000038976d4 x4 : 0000000000000000 x3 : 0000000000003186 [ 1303.438956] x2 : 000000004836ba20 x1 : 0000000000006986 x0 : 00000000d00479de [ 1303.446221] Call trace: [ 1303.448722] cfg80211_process_disassoc+0x78/0xec [cfg80211] (P) [ 1303.454894] cfg80211_rx_mlme_mgmt+0x64/0xf8 [cfg80211] [ 1303.460362] mwifiex_process_mgmt_packet+0x1ec/0x460 [mwifiex] [ 1303.466380] mwifiex_process_sta_rx_packet+0x1bc/0x2a0 [mwifiex] [ 1303.472573] mwifiex_handle_rx_packet+0xb4/0x13c [mwifiex] [ 1303.478243] mwifiex_rx_work_queue+0x158/0x198 [mwifiex] [ 1303.483734] process_one_work+0x14c/0x28c [ 1303.487845] worker_thread+0x2cc/0x3d4 [ 1303.491680] kthread+0x12c/0x208 [ 1303.495014] ret_from_fork+0x10/0x20 Add validation in the STA receive path to verify that disassoc/deauth frames originate from the connected AP. Frames that fail this check are discarded early, preventing them from reaching the MLME layer and triggering WARN_ON(). This filtering logic is similar with that used in the ieee80211_rx_mgmt_disassoc() function in mac80211, which drops disassoc frames that don't match the current BSSID (!ether_addr_equal(mgmt->bssid, sdata->vif.cfg.ap_addr)), ensuring only relevant frames are processed. Tested on: - 8997 with FW 16.68.1.p197 | |||||
| CVE-2025-38502 | 3 Debian, Linux, Siemens | 4 Debian Linux, Linux Kernel, Simatic Cn 4100 and 1 more | 2026-10-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix oob access in cgroup local storage Lonial reported that an out-of-bounds access in cgroup local storage can be crafted via tail calls. Given two programs each utilizing a cgroup local storage with a different value size, and one program doing a tail call into the other. The verifier will validate each of the indivial programs just fine. However, in the runtime context the bpf_cg_run_ctx holds an bpf_prog_array_item which contains the BPF program as well as any cgroup local storage flavor the program uses. Helpers such as bpf_get_local_storage() pick this up from the runtime context: ctx = container_of(current->bpf_ctx, struct bpf_cg_run_ctx, run_ctx); storage = ctx->prog_item->cgroup_storage[stype]; if (stype == BPF_CGROUP_STORAGE_SHARED) ptr = &READ_ONCE(storage->buf)->data[0]; else ptr = this_cpu_ptr(storage->percpu_buf); For the second program which was called from the originally attached one, this means bpf_get_local_storage() will pick up the former program's map, not its own. With mismatching sizes, this can result in an unintended out-of-bounds access. To fix this issue, we need to extend bpf_map_owner with an array of storage_cookie[] to match on i) the exact maps from the original program if the second program was using bpf_get_local_storage(), or ii) allow the tail call combination if the second program was not using any of the cgroup local storage maps. | |||||
| CVE-2025-38499 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns What we want is to verify there is that clone won't expose something hidden by a mount we wouldn't be able to undo. "Wouldn't be able to undo" may be a result of MNT_LOCKED on a child, but it may also come from lacking admin rights in the userns of the namespace mount belongs to. clone_private_mnt() checks the former, but not the latter. There's a number of rather confusing CAP_SYS_ADMIN checks in various userns during the mount, especially with the new mount API; they serve different purposes and in case of clone_private_mnt() they usually, but not always end up covering the missing check mentioned above. | |||||
| CVE-2025-38491 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | N/A | 8.2 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: make fallback action and fallback decision atomic Syzkaller reported the following splat: WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 __mptcp_do_fallback net/mptcp/protocol.h:1223 [inline] WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_do_fallback net/mptcp/protocol.h:1244 [inline] WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 check_fully_established net/mptcp/options.c:982 [inline] WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153 Modules linked in: CPU: 1 UID: 0 PID: 7704 Comm: syz.3.1419 Not tainted 6.16.0-rc3-gbd5ce2324dba #20 PREEMPT(voluntary) Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:__mptcp_do_fallback net/mptcp/protocol.h:1223 [inline] RIP: 0010:mptcp_do_fallback net/mptcp/protocol.h:1244 [inline] RIP: 0010:check_fully_established net/mptcp/options.c:982 [inline] RIP: 0010:mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153 Code: 24 18 e8 bb 2a 00 fd e9 1b df ff ff e8 b1 21 0f 00 e8 ec 5f c4 fc 44 0f b7 ac 24 b0 00 00 00 e9 54 f1 ff ff e8 d9 5f c4 fc 90 <0f> 0b 90 e9 b8 f4 ff ff e8 8b 2a 00 fd e9 8d e6 ff ff e8 81 2a 00 RSP: 0018:ffff8880a3f08448 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880180a8000 RCX: ffffffff84afcf45 RDX: ffff888090223700 RSI: ffffffff84afdaa7 RDI: 0000000000000001 RBP: ffff888017955780 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8880180a8910 R14: ffff8880a3e9d058 R15: 0000000000000000 FS: 00005555791b8500(0000) GS:ffff88811c495000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000110c2800b7 CR3: 0000000058e44000 CR4: 0000000000350ef0 Call Trace: <IRQ> tcp_reset+0x26f/0x2b0 net/ipv4/tcp_input.c:4432 tcp_validate_incoming+0x1057/0x1b60 net/ipv4/tcp_input.c:5975 tcp_rcv_established+0x5b5/0x21f0 net/ipv4/tcp_input.c:6166 tcp_v4_do_rcv+0x5dc/0xa70 net/ipv4/tcp_ipv4.c:1925 tcp_v4_rcv+0x3473/0x44a0 net/ipv4/tcp_ipv4.c:2363 ip_protocol_deliver_rcu+0xba/0x480 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2f1/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:317 [inline] NF_HOOK include/linux/netfilter.h:311 [inline] ip_local_deliver+0x1be/0x560 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:469 [inline] ip_rcv_finish net/ipv4/ip_input.c:447 [inline] NF_HOOK include/linux/netfilter.h:317 [inline] NF_HOOK include/linux/netfilter.h:311 [inline] ip_rcv+0x514/0x810 net/ipv4/ip_input.c:567 __netif_receive_skb_one_core+0x197/0x1e0 net/core/dev.c:5975 __netif_receive_skb+0x1f/0x120 net/core/dev.c:6088 process_backlog+0x301/0x1360 net/core/dev.c:6440 __napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7453 napi_poll net/core/dev.c:7517 [inline] net_rx_action+0xb44/0x1010 net/core/dev.c:7644 handle_softirqs+0x1d0/0x770 kernel/softirq.c:579 do_softirq+0x3f/0x90 kernel/softirq.c:480 </IRQ> <TASK> __local_bh_enable_ip+0xed/0x110 kernel/softirq.c:407 local_bh_enable include/linux/bottom_half.h:33 [inline] inet_csk_listen_stop+0x2c5/0x1070 net/ipv4/inet_connection_sock.c:1524 mptcp_check_listen_stop.part.0+0x1cc/0x220 net/mptcp/protocol.c:2985 mptcp_check_listen_stop net/mptcp/mib.h:118 [inline] __mptcp_close+0x9b9/0xbd0 net/mptcp/protocol.c:3000 mptcp_close+0x2f/0x140 net/mptcp/protocol.c:3066 inet_release+0xed/0x200 net/ipv4/af_inet.c:435 inet6_release+0x4f/0x70 net/ipv6/af_inet6.c:487 __sock_release+0xb3/0x270 net/socket.c:649 sock_close+0x1c/0x30 net/socket.c:1439 __fput+0x402/0xb70 fs/file_table.c:465 task_work_run+0x150/0x240 kernel/task_work.c:227 resume_user_mode_work include/linux/resume_user_mode.h:50 [inline] exit_to_user_mode_loop+0xd4 ---truncated--- | |||||