Filtered by vendor Linux
Subscribe
Total
19806 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-43006 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/rsrc: reject zero-length fixed buffer import validate_fixed_range() admits buf_addr at the exact end of the registered region when len is zero, because the check uses strict greater-than (buf_end > imu->ubuf + imu->len). io_import_fixed() then computes offset == imu->len, which causes the bvec skip logic to advance past the last bio_vec entry and read bv_offset from out-of-bounds slab memory. Return early from io_import_fixed() when len is zero. A zero-length import has no data to transfer and should not walk the bvec array at all. BUG: KASAN: slab-out-of-bounds in io_import_reg_buf+0x697/0x7f0 Read of size 4 at addr ffff888002bcc254 by task poc/103 Call Trace: io_import_reg_buf+0x697/0x7f0 io_write_fixed+0xd9/0x250 __io_issue_sqe+0xad/0x710 io_issue_sqe+0x7d/0x1100 io_submit_sqes+0x86a/0x23c0 __do_sys_io_uring_enter+0xa98/0x1590 Allocated by task 103: The buggy address is located 12 bytes to the right of allocated 584-byte region [ffff888002bcc000, ffff888002bcc248) | |||||
| CVE-2026-31479 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: always keep track of remap prev/next During 3D workload, user is reporting hitting: [ 413.361679] WARNING: drivers/gpu/drm/xe/xe_vm.c:1217 at vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe], CPU#7: vkd3d_queue/9925 [ 413.361944] CPU: 7 UID: 1000 PID: 9925 Comm: vkd3d_queue Kdump: loaded Not tainted 7.0.0-070000rc3-generic #202603090038 PREEMPT(lazy) [ 413.361949] RIP: 0010:vm_bind_ioctl_ops_unwind+0x1e2/0x2e0 [xe] [ 413.362074] RSP: 0018:ffffd4c25c3df930 EFLAGS: 00010282 [ 413.362077] RAX: 0000000000000000 RBX: ffff8f3ee817ed10 RCX: 0000000000000000 [ 413.362078] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 413.362079] RBP: ffffd4c25c3df980 R08: 0000000000000000 R09: 0000000000000000 [ 413.362081] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8f41fbf99380 [ 413.362082] R13: ffff8f3ee817e968 R14: 00000000ffffffef R15: ffff8f43d00bd380 [ 413.362083] FS: 00000001040ff6c0(0000) GS:ffff8f4696d89000(0000) knlGS:00000000330b0000 [ 413.362085] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 413.362086] CR2: 00007ddfc4747000 CR3: 00000002e6262005 CR4: 0000000000f72ef0 [ 413.362088] PKRU: 55555554 [ 413.362089] Call Trace: [ 413.362092] <TASK> [ 413.362096] xe_vm_bind_ioctl+0xa9a/0xc60 [xe] Which seems to hint that the vma we are re-inserting for the ops unwind is either invalid or overlapping with something already inserted in the vm. It shouldn't be invalid since this is a re-insertion, so must have worked before. Leaving the likely culprit as something already placed where we want to insert the vma. Following from that, for the case where we do something like a rebind in the middle of a vma, and one or both mapped ends are already compatible, we skip doing the rebind of those vma and set next/prev to NULL. As well as then adjust the original unmap va range, to avoid unmapping the ends. However, if we trigger the unwind path, we end up with three va, with the two ends never being removed and the original va range in the middle still being the shrunken size. If this occurs, one failure mode is when another unwind op needs to interact with that range, which can happen with a vector of binds. For example, if we need to re-insert something in place of the original va. In this case the va is still the shrunken version, so when removing it and then doing a re-insert it can overlap with the ends, which were never removed, triggering a warning like above, plus leaving the vm in a bad state. With that, we need two things here: 1) Stop nuking the prev/next tracking for the skip cases. Instead relying on checking for skip prev/next, where needed. That way on the unwind path, we now correctly remove both ends. 2) Undo the unmap va shrinkage, on the unwind path. With the two ends now removed the unmap va should expand back to the original size again, before re-insertion. v2: - Update the explanation in the commit message, based on an actual IGT of triggering this issue, rather than conjecture. - Also undo the unmap shrinkage, for the skip case. With the two ends now removed, the original unmap va range should expand back to the original range. v3: - Track the old start/range separately. vma_size/start() uses the va info directly. (cherry picked from commit aec6969f75afbf4e01fd5fb5850ed3e9c27043ac) | |||||
| CVE-2026-31647 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix PREEMPT_RT raw/bh spinlock nesting for async VC handling Switch from using the completion's raw spinlock to a local lock in the idpf_vc_xn struct. The conversion is safe because complete/_all() are called outside the lock and there is no reason to share the completion lock in the current logic. This avoids invalid wait context reported by the kernel due to the async handler taking BH spinlock: [ 805.726977] ============================= [ 805.726991] [ BUG: Invalid wait context ] [ 805.727006] 7.0.0-rc2-net-devq-031026+ #28 Tainted: G S OE [ 805.727026] ----------------------------- [ 805.727038] kworker/u261:0/572 is trying to lock: [ 805.727051] ff190da6a8dbb6a0 (&vport_config->mac_filter_list_lock){+...}-{3:3}, at: idpf_mac_filter_async_handler+0xe9/0x260 [idpf] [ 805.727099] other info that might help us debug this: [ 805.727111] context-{5:5} [ 805.727119] 3 locks held by kworker/u261:0/572: [ 805.727132] #0: ff190da6db3e6148 ((wq_completion)idpf-0000:83:00.0-mbx){+.+.}-{0:0}, at: process_one_work+0x4b5/0x730 [ 805.727163] #1: ff3c6f0a6131fe50 ((work_completion)(&(&adapter->mbx_task)->work)){+.+.}-{0:0}, at: process_one_work+0x1e5/0x730 [ 805.727191] #2: ff190da765190020 (&x->wait#34){+.+.}-{2:2}, at: idpf_recv_mb_msg+0xc8/0x710 [idpf] [ 805.727218] stack backtrace: ... [ 805.727238] Workqueue: idpf-0000:83:00.0-mbx idpf_mbx_task [idpf] [ 805.727247] Call Trace: [ 805.727249] <TASK> [ 805.727251] dump_stack_lvl+0x77/0xb0 [ 805.727259] __lock_acquire+0xb3b/0x2290 [ 805.727268] ? __irq_work_queue_local+0x59/0x130 [ 805.727275] lock_acquire+0xc6/0x2f0 [ 805.727277] ? idpf_mac_filter_async_handler+0xe9/0x260 [idpf] [ 805.727284] ? _printk+0x5b/0x80 [ 805.727290] _raw_spin_lock_bh+0x38/0x50 [ 805.727298] ? idpf_mac_filter_async_handler+0xe9/0x260 [idpf] [ 805.727303] idpf_mac_filter_async_handler+0xe9/0x260 [idpf] [ 805.727310] idpf_recv_mb_msg+0x1c8/0x710 [idpf] [ 805.727317] process_one_work+0x226/0x730 [ 805.727322] worker_thread+0x19e/0x340 [ 805.727325] ? __pfx_worker_thread+0x10/0x10 [ 805.727328] kthread+0xf4/0x130 [ 805.727333] ? __pfx_kthread+0x10/0x10 [ 805.727336] ret_from_fork+0x32c/0x410 [ 805.727345] ? __pfx_kthread+0x10/0x10 [ 805.727347] ret_from_fork_asm+0x1a/0x30 [ 805.727354] </TASK> | |||||
| CVE-2026-31585 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: vidtv: fix nfeeds state corruption on start_streaming failure syzbot reported a memory leak in vidtv_psi_service_desc_init [1]. When vidtv_start_streaming() fails inside vidtv_start_feed(), the nfeeds counter is left incremented even though no feed was actually started. This corrupts the driver state: subsequent start_feed calls see nfeeds > 1 and skip starting the mux, while stop_feed calls eventually try to stop a non-existent stream. This state corruption can also lead to memory leaks, since the mux and channel resources may be partially allocated during a failed start_streaming but never cleaned up, as the stop path finds dvb->streaming == false and returns early. Fix by decrementing nfeeds back when start_streaming fails, keeping the counter in sync with the actual number of active feeds. [1] BUG: memory leak unreferenced object 0xffff888145b50820 (size 32): comm "syz.0.17", pid 6068, jiffies 4294944486 backtrace (crc 90a0c7d4): vidtv_psi_service_desc_init+0x74/0x1b0 drivers/media/test-drivers/vidtv/vidtv_psi.c:288 vidtv_channel_s302m_init+0xb1/0x2a0 drivers/media/test-drivers/vidtv/vidtv_channel.c:83 vidtv_channels_init+0x1b/0x40 drivers/media/test-drivers/vidtv/vidtv_channel.c:524 vidtv_mux_init+0x516/0xbe0 drivers/media/test-drivers/vidtv/vidtv_mux.c:518 vidtv_start_streaming drivers/media/test-drivers/vidtv/vidtv_bridge.c:194 [inline] vidtv_start_feed+0x33e/0x4d0 drivers/media/test-drivers/vidtv/vidtv_bridge.c:239 | |||||
| CVE-2026-31587 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6apm: move component registration to unmanaged version q6apm component registers dais dynamically from ASoC toplology, which are allocated using device managed version apis. Allocating both component and dynamic dais using managed version could lead to incorrect free ordering, dai will be freed while component still holding references to it. Fix this issue by moving component to unmanged version so that the dai pointers are only freeded after the component is removed. ================================================================== BUG: KASAN: slab-use-after-free in snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core] Read of size 8 at addr ffff00084493a6e8 by task kworker/u48:0/3426 Tainted: [W]=WARN Hardware name: LENOVO 21N2ZC5PUS/21N2ZC5PUS, BIOS N42ET57W (1.31 ) 08/08/2024 Workqueue: pdr_notifier_wq pdr_notifier_work [pdr_interface] Call trace: show_stack+0x28/0x7c (C) dump_stack_lvl+0x60/0x80 print_report+0x160/0x4b4 kasan_report+0xac/0xfc __asan_report_load8_noabort+0x20/0x34 snd_soc_del_component_unlocked+0x3d4/0x400 [snd_soc_core] snd_soc_unregister_component_by_driver+0x50/0x88 [snd_soc_core] devm_component_release+0x30/0x5c [snd_soc_core] devres_release_all+0x13c/0x210 device_unbind_cleanup+0x20/0x190 device_release_driver_internal+0x350/0x468 device_release_driver+0x18/0x30 bus_remove_device+0x1a0/0x35c device_del+0x314/0x7f0 device_unregister+0x20/0xbc apr_remove_device+0x5c/0x7c [apr] device_for_each_child+0xd8/0x160 apr_pd_status+0x7c/0xa8 [apr] pdr_notifier_work+0x114/0x240 [pdr_interface] process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20 Allocated by task 77: kasan_save_stack+0x40/0x68 kasan_save_track+0x20/0x40 kasan_save_alloc_info+0x44/0x58 __kasan_kmalloc+0xbc/0xdc __kmalloc_node_track_caller_noprof+0x1f4/0x620 devm_kmalloc+0x7c/0x1c8 snd_soc_register_dai+0x50/0x4f0 [snd_soc_core] soc_tplg_pcm_elems_load+0x55c/0x1eb8 [snd_soc_core] snd_soc_tplg_component_load+0x4f8/0xb60 [snd_soc_core] audioreach_tplg_init+0x124/0x1fc [snd_q6apm] q6apm_audio_probe+0x10/0x1c [snd_q6apm] snd_soc_component_probe+0x5c/0x118 [snd_soc_core] soc_probe_component+0x44c/0xaf0 [snd_soc_core] snd_soc_bind_card+0xad0/0x2370 [snd_soc_core] snd_soc_register_card+0x3b0/0x4c0 [snd_soc_core] devm_snd_soc_register_card+0x50/0xc8 [snd_soc_core] x1e80100_platform_probe+0x208/0x368 [snd_soc_x1e80100] platform_probe+0xc0/0x188 really_probe+0x188/0x804 __driver_probe_device+0x158/0x358 driver_probe_device+0x60/0x190 __device_attach_driver+0x16c/0x2a8 bus_for_each_drv+0x100/0x194 __device_attach+0x174/0x380 device_initial_probe+0x14/0x20 bus_probe_device+0x124/0x154 deferred_probe_work_func+0x140/0x220 process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20 Freed by task 3426: kasan_save_stack+0x40/0x68 kasan_save_track+0x20/0x40 __kasan_save_free_info+0x4c/0x80 __kasan_slab_free+0x78/0xa0 kfree+0x100/0x4a4 devres_release_all+0x144/0x210 device_unbind_cleanup+0x20/0x190 device_release_driver_internal+0x350/0x468 device_release_driver+0x18/0x30 bus_remove_device+0x1a0/0x35c device_del+0x314/0x7f0 device_unregister+0x20/0xbc apr_remove_device+0x5c/0x7c [apr] device_for_each_child+0xd8/0x160 apr_pd_status+0x7c/0xa8 [apr] pdr_notifier_work+0x114/0x240 [pdr_interface] process_one_work+0x500/0xb70 worker_thread+0x630/0xfb0 kthread+0x370/0x6c0 ret_from_fork+0x10/0x20 | |||||
| CVE-2026-31523 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nvme-pci: ensure we're polling a polled queue A user can change the polled queue count at run time. There's a brief window during a reset where a hipri task may try to poll that queue before the block layer has updated the queue maps, which would race with the now interrupt driven queue and may cause double completions. | |||||
| CVE-2026-31560 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-dw-dma: fix print error log when wait finish transaction If an error occurs, the device may not have a current message. In this case, the system will crash. In this case, it's better to use dev from the struct ctlr (struct spi_controller*). | |||||
| CVE-2026-31674 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_rt: reject oversized addrnr in rt_mt6_check() Reject rt match rules whose addrnr exceeds IP6T_RT_HOPS. rt_mt6() expects addrnr to stay within the bounds of rtinfo->addrs[]. Validate addrnr during rule installation so malformed rules are rejected before the match logic can use an out-of-range value. | |||||
| CVE-2026-31492 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Initialize free_qp completion before using it In irdma_create_qp, if ib_copy_to_udata fails, it will call irdma_destroy_qp to clean up which will attempt to wait on the free_qp completion, which is not initialized yet. Fix this by initializing the completion before the ib_copy_to_udata call. | |||||
| CVE-2026-43274 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 8.4 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: mchp-ipc-sbi: fix out-of-bounds access in mchp_ipc_get_cluster_aggr_irq() The cluster_cfg array is dynamically allocated to hold per-CPU configuration structures, with its size based on the number of online CPUs. Previously, this array was indexed using hartid, which may be non-contiguous or exceed the bounds of the array, leading to out-of-bounds access. Switch to using cpuid as the index, as it is guaranteed to be within the valid range provided by for_each_online_cpu(). | |||||
| CVE-2026-43005 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (tps53679) Fix array access with zero-length block read i2c_smbus_read_block_data() can return 0, indicating a zero-length read. When this happens, tps53679_identify_chip() accesses buf[ret - 1] which is buf[-1], reading one byte before the buffer on the stack. Fix by changing the check from "ret < 0" to "ret <= 0", treating a zero-length read as an error (-EIO), which prevents the out-of-bounds array access. Also fix a typo in the adjacent comment: "if present" instead of duplicate "if". | |||||
| CVE-2026-31671 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: xfrm_user: fix info leak in build_report() struct xfrm_user_report is a __u8 proto field followed by a struct xfrm_selector which means there is three "empty" bytes of padding, but the padding is never zeroed before copying to userspace. Fix that up by zeroing the structure before setting individual member variables. | |||||
| CVE-2026-31477 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix memory leaks and NULL deref in smb2_lock() smb2_lock() has three error handling issues after list_del() detaches smb_lock from lock_list at no_check_cl: 1) If vfs_lock_file() returns an unexpected error in the non-UNLOCK path, goto out leaks smb_lock and its flock because the out: handler only iterates lock_list and rollback_list, neither of which contains the detached smb_lock. 2) If vfs_lock_file() returns -ENOENT in the UNLOCK path, goto out leaks smb_lock and flock for the same reason. The error code returned to the dispatcher is also stale. 3) In the rollback path, smb_flock_init() can return NULL on allocation failure. The result is dereferenced unconditionally, causing a kernel NULL pointer dereference. Add a NULL check to prevent the crash and clean up the bookkeeping; the VFS lock itself cannot be rolled back without the allocation and will be released at file or connection teardown. Fix cases 1 and 2 by hoisting the locks_free_lock()/kfree() to before the if(!rc) check in the UNLOCK branch so all exit paths share one free site, and by freeing smb_lock and flock before goto out in the non-UNLOCK branch. Propagate the correct error code in both cases. Fix case 3 by wrapping the VFS unlock in an if(rlock) guard and adding a NULL check for locks_free_lock(rlock) in the shared cleanup. Found via call-graph analysis using sqry. | |||||
| CVE-2026-31592 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Protect *all* of sev_mem_enc_register_region() with kvm->lock Take and hold kvm->lock for before checking sev_guest() in sev_mem_enc_register_region(), as sev_guest() isn't stable unless kvm->lock is held (or KVM can guarantee KVM_SEV_INIT{2} has completed and can't rollack state). If KVM_SEV_INIT{2} fails, KVM can end up trying to add to a not-yet-initialized sev->regions_list, e.g. triggering a #GP Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 110 UID: 0 PID: 72717 Comm: syz.15.11462 Tainted: G U W O 6.16.0-smp-DEV #1 NONE Tainted: [U]=USER, [W]=WARN, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024 RIP: 0010:sev_mem_enc_register_region+0x3f0/0x4f0 ../include/linux/list.h:83 Code: <41> 80 3c 04 00 74 08 4c 89 ff e8 f1 c7 a2 00 49 39 ed 0f 84 c6 00 RSP: 0018:ffff88838647fbb8 EFLAGS: 00010256 RAX: dffffc0000000000 RBX: 1ffff92015cf1e0b RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000001000 RDI: ffff888367870000 RBP: ffffc900ae78f050 R08: ffffea000d9e0007 R09: 1ffffd4001b3c000 R10: dffffc0000000000 R11: fffff94001b3c001 R12: 0000000000000000 R13: ffff8982ab0bde00 R14: ffffc900ae78f058 R15: 0000000000000000 FS: 00007f34e9dc66c0(0000) GS:ffff89ee64d33000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe180adef98 CR3: 000000047210e000 CR4: 0000000000350ef0 Call Trace: <TASK> kvm_arch_vm_ioctl+0xa72/0x1240 ../arch/x86/kvm/x86.c:7371 kvm_vm_ioctl+0x649/0x990 ../virt/kvm/kvm_main.c:5363 __se_sys_ioctl+0x101/0x170 ../fs/ioctl.c:51 do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x6f/0x1f0 ../arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f34e9f7e9a9 Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f34e9dc6038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f34ea1a6080 RCX: 00007f34e9f7e9a9 RDX: 0000200000000280 RSI: 000000008010aebb RDI: 0000000000000007 RBP: 00007f34ea000d69 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f34ea1a6080 R15: 00007ffce77197a8 </TASK> with a syzlang reproducer that looks like: syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000040)={0x0, &(0x7f0000000180)=ANY=[], 0x70}) (async) syz_kvm_add_vcpu$x86(0x0, &(0x7f0000000080)={0x0, &(0x7f0000000180)=ANY=[@ANYBLOB="..."], 0x4f}) (async) r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000200), 0x0, 0x0) r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0) r2 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000240), 0x0, 0x0) r3 = ioctl$KVM_CREATE_VM(r2, 0xae01, 0x0) ioctl$KVM_SET_CLOCK(r3, 0xc008aeba, &(0x7f0000000040)={0x1, 0x8, 0x0, 0x5625e9b0}) (async) ioctl$KVM_SET_PIT2(r3, 0x8010aebb, &(0x7f0000000280)={[...], 0x5}) (async) ioctl$KVM_SET_PIT2(r1, 0x4070aea0, 0x0) (async) r4 = ioctl$KVM_CREATE_VM(0xffffffffffffffff, 0xae01, 0x0) openat$kvm(0xffffffffffffff9c, 0x0, 0x0, 0x0) (async) ioctl$KVM_SET_USER_MEMORY_REGION(r4, 0x4020ae46, &(0x7f0000000400)={0x0, 0x0, 0x0, 0x2000, &(0x7f0000001000/0x2000)=nil}) (async) r5 = ioctl$KVM_CREATE_VCPU(r4, 0xae41, 0x2) close(r0) (async) openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x8000, 0x0) (async) ioctl$KVM_SET_GUEST_DEBUG(r5, 0x4048ae9b, &(0x7f0000000300)={0x4376ea830d46549b, 0x0, [0x46, 0x0, 0x0, 0x0, 0x0, 0x1000]}) (async) ioctl$KVM_RUN(r5, 0xae80, 0x0) Opportunistically use guard() to avoid having to define a new error label and goto usage. | |||||
| CVE-2026-31597 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY filemap_fault() may drop the mmap_lock before returning VM_FAULT_RETRY, as documented in mm/filemap.c: "If our return value has VM_FAULT_RETRY set, it's because the mmap_lock may be dropped before doing I/O or by lock_folio_maybe_drop_mmap()." When this happens, a concurrent munmap() can call remove_vma() and free the vm_area_struct via RCU. The saved 'vma' pointer in ocfs2_fault() then becomes a dangling pointer, and the subsequent trace_ocfs2_fault() call dereferences it -- a use-after-free. Fix this by saving ip_blkno as a plain integer before calling filemap_fault(), and removing vma from the trace event. Since ip_blkno is copied by value before the lock can be dropped, it remains valid regardless of what happens to the vma or inode afterward. | |||||
| CVE-2026-31431 | 10 Amazon, Arista, Canonical and 7 more | 60 Amazon Linux, Cloudvision Agni, Cloudvision Portal and 57 more | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: algif_aead - Revert to operating out-of-place This mostly reverts commit 72548b093ee3 except for the copying of the associated data. There is no benefit in operating in-place in algif_aead since the source and destination come from different mappings. Get rid of all the complexity added for in-place operation and just copy the AD directly. | |||||
| CVE-2026-31473 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: media: mc, v4l2: serialize REINIT and REQBUFS with req_queue_mutex MEDIA_REQUEST_IOC_REINIT can run concurrently with VIDIOC_REQBUFS(0) queue teardown paths. This can race request object cleanup against vb2 queue cancellation and lead to use-after-free reports. We already serialize request queueing against STREAMON/OFF with req_queue_mutex. Extend that serialization to REQBUFS, and also take the same mutex in media_request_ioctl_reinit() so REINIT is in the same exclusion domain. This keeps request cleanup and queue cancellation from running in parallel for request-capable devices. | |||||
| CVE-2026-43262 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: fiemap page fault fix In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode glock. This can lead to recursive glock taking if the fiemap buffer is memory mapped to the same inode and accessing it triggers a page fault. Fix by disabling page faults for iomap_fiemap() and faulting in the buffer by hand if necessary. Fixes xfstest generic/742. | |||||
| CVE-2026-43029 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix soft lockup in mptcp_recvmsg() syzbot reported a soft lockup in mptcp_recvmsg() [0]. When receiving data with MSG_PEEK | MSG_WAITALL flags, the skb is not removed from the sk_receive_queue. This causes sk_wait_data() to always find available data and never perform actual waiting, leading to a soft lockup. Fix this by adding a 'last' parameter to track the last peeked skb. This allows sk_wait_data() to make informed waiting decisions and prevent infinite loops when MSG_PEEK is used. [0]: watchdog: BUG: soft lockup - CPU#2 stuck for 156s! [server:1963] Modules linked in: CPU: 2 UID: 0 PID: 1963 Comm: server Not tainted 6.19.0-rc8 #61 PREEMPT(none) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:sk_wait_data+0x15/0x190 Code: 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 41 56 41 55 41 54 49 89 f4 55 48 89 d5 53 48 89 fb <48> 83 ec 30 65 48 8b 05 17 a4 6b 01 48 89 44 24 28 31 c0 65 48 8b RSP: 0018:ffffc90000603ca0 EFLAGS: 00000246 RAX: 0000000000000000 RBX: ffff888102bf0800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffc90000603d18 RDI: ffff888102bf0800 RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000101 R10: 0000000000000000 R11: 0000000000000075 R12: ffffc90000603d18 R13: ffff888102bf0800 R14: ffff888102bf0800 R15: 0000000000000000 FS: 00007f6e38b8c4c0(0000) GS:ffff8881b877e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055aa7bff1680 CR3: 0000000105cbe000 CR4: 00000000000006f0 Call Trace: <TASK> mptcp_recvmsg+0x547/0x8c0 net/mptcp/protocol.c:2329 inet_recvmsg+0x11f/0x130 net/ipv4/af_inet.c:891 sock_recvmsg+0x94/0xc0 net/socket.c:1100 __sys_recvfrom+0xb2/0x130 net/socket.c:2256 __x64_sys_recvfrom+0x1f/0x30 net/socket.c:2267 do_syscall_64+0x59/0x2d0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:131 RIP: 0033:0x7f6e386a4a1d Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8d 05 f1 de 2c 00 41 89 ca 8b 00 85 c0 75 20 45 31 c9 45 31 c0 b8 2d 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 6b f3 c3 66 0f 1f 84 00 00 00 00 00 41 56 41 RSP: 002b:00007ffc3c4bb078 EFLAGS: 00000246 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 000000000000861e RCX: 00007f6e386a4a1d RDX: 00000000000003ff RSI: 00007ffc3c4bb150 RDI: 0000000000000004 RBP: 00007ffc3c4bb570 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000103 R11: 0000000000000246 R12: 00005605dbc00be0 R13: 00007ffc3c4bb650 R14: 0000000000000000 R15: 0000000000000000 </TASK> | |||||
| CVE-2026-31650 | 1 Linux | 1 Linux Kernel | 2026-11-11 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix use-after-free on disconnect The vub300 driver maintains an explicit reference count for the controller and its driver data and the last reference can in theory be dropped after the driver has been unbound. This specifically means that the controller allocation must not be device managed as that can lead to use-after-free. Note that the lifetime is currently also incorrectly tied the parent USB device rather than interface, which can lead to memory leaks if the driver is unbound without its device being physically disconnected (e.g. on probe deferral). Fix both issues by reverting to non-managed allocation of the controller. | |||||