Total
36333 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-23307 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: can: ems_usb: ems_usb_read_bulk_callback(): check the proper length of a message When looking at the data in a USB urb, the actual_length is the size of the buffer passed to the driver, not the transfer_buffer_length which is set by the driver as the max size of the buffer. When parsing the messages in ems_usb_read_bulk_callback() properly check the size both at the beginning of parsing the message to make sure it is big enough for the expected structure, and at the end of the message to make sure we don't overflow past the end of the buffer for the next message. | |||||
| CVE-2026-23303 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: Don't log plaintext credentials in cifs_set_cifscreds When debug logging is enabled, cifs_set_cifscreds() logs the key payload and exposes the plaintext username and password. Remove the debug log to avoid exposing credentials. | |||||
| CVE-2026-23289 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: IB/mthca: Add missed mthca_unmap_user_db() for mthca_create_srq() Fix a user triggerable leak on the system call failure path. | |||||
| CVE-2026-23280 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Prevent ubuf size overflow The ubuf size calculation may overflow, resulting in an undersized allocation and possible memory corruption. Use check_add_overflow() helpers to validate the size calculation before allocation. | |||||
| CVE-2026-23275 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: ensure ctx->rings is stable for task work flags manipulation If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while the ring is being resized, it's possible for the OR'ing of IORING_SQ_TASKRUN to happen in the small window of swapping into the new rings and the old rings being freed. Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is protected by RCU. The task work flags manipulation is inside RCU already, and if the resize ring freeing is done post an RCU synchronize, then there's no need to add locking to the fast path of task work additions. Note: this is only done for DEFER_TASKRUN, as that's the only setup mode that supports ring resizing. If this ever changes, then they too need to use the io_ctx_mark_taskrun() helper. | |||||
| CVE-2026-23268 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix unprivileged local user can do privileged policy management An unprivileged local user can load, replace, and remove profiles by opening the apparmorfs interfaces, via a confused deputy attack, by passing the opened fd to a privileged process, and getting the privileged process to write to the interface. This does require a privileged target that can be manipulated to do the write for the unprivileged process, but once such access is achieved full policy management is possible and all the possible implications that implies: removing confinement, DoS of system or target applications by denying all execution, by-passing the unprivileged user namespace restriction, to exploiting kernel bugs for a local privilege escalation. The policy management interface can not have its permissions simply changed from 0666 to 0600 because non-root processes need to be able to load policy to different policy namespaces. Instead ensure the task writing the interface has privileges that are a subset of the task that opened the interface. This is already done via policy for confined processes, but unconfined can delegate access to the opened fd, by-passing the usual policy check. | |||||
| CVE-2026-23267 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix IS_CHECKPOINTED flag inconsistency issue caused by concurrent atomic commit and checkpoint writes During SPO tests, when mounting F2FS, an -EINVAL error was returned from f2fs_recover_inode_page. The issue occurred under the following scenario Thread A Thread B f2fs_ioc_commit_atomic_write - f2fs_do_sync_file // atomic = true - f2fs_fsync_node_pages : last_folio = inode folio : schedule before folio_lock(last_folio) f2fs_write_checkpoint - block_operations// writeback last_folio - schedule before f2fs_flush_nat_entries : set_fsync_mark(last_folio, 1) : set_dentry_mark(last_folio, 1) : folio_mark_dirty(last_folio) - __write_node_folio(last_folio) : f2fs_down_read(&sbi->node_write)//block - f2fs_flush_nat_entries : {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED) - unblock_operations : f2fs_up_write(&sbi->node_write) f2fs_write_checkpoint//return : f2fs_do_write_node_page() f2fs_ioc_commit_atomic_write//return SPO Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has already been written once. However, the {struct nat_entry}->flag did not have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and write last_folio again after Thread B finishes f2fs_write_checkpoint. After SPO and reboot, it was detected that {struct node_info}->blk_addr was not NULL_ADDR because Thread B successfully write the checkpoint. This issue only occurs in atomic write scenarios. For regular file fsync operations, the folio must be dirty. If block_operations->f2fs_sync_node_pages successfully submit the folio write, this path will not be executed. Otherwise, the f2fs_write_checkpoint will need to wait for the folio write submission to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the situation where f2fs_need_dentry_mark checks that the {struct nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has already been submitted, will not occur. Therefore, for atomic file fsync, sbi->node_write should be acquired through __write_node_folio to ensure that the IS_CHECKPOINTED flag correctly indicates that the checkpoint write has been completed. | |||||
| CVE-2026-23265 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on node footer in {read,write}_end_io -----------[ cut here ]------------ kernel BUG at fs/f2fs/data.c:358! Call Trace: <IRQ> blk_update_request+0x5eb/0xe70 block/blk-mq.c:987 blk_mq_end_request+0x3e/0x70 block/blk-mq.c:1149 blk_complete_reqs block/blk-mq.c:1224 [inline] blk_done_softirq+0x107/0x160 block/blk-mq.c:1229 handle_softirqs+0x283/0x870 kernel/softirq.c:579 __do_softirq kernel/softirq.c:613 [inline] invoke_softirq kernel/softirq.c:453 [inline] __irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:680 irq_exit_rcu+0x9/0x30 kernel/softirq.c:696 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1050 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1050 </IRQ> In f2fs_write_end_io(), it detects there is inconsistency in between node page index (nid) and footer.nid of node page. If footer of node page is corrupted in fuzzed image, then we load corrupted node page w/ async method, e.g. f2fs_ra_node_pages() or f2fs_ra_node_page(), in where we won't do sanity check on node footer, once node page becomes dirty, we will encounter this bug after node page writeback. | |||||
| CVE-2026-23264 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Revert "drm/amd: Check if ASPM is enabled from PCIe subsystem" This reverts commit 7294863a6f01248d72b61d38478978d638641bee. This commit was erroneously applied again after commit 0ab5d711ec74 ("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device") removed it, leading to very hard to debug crashes, when used with a system with two AMD GPUs of which only one supports ASPM. (cherry picked from commit 97a9689300eb2b393ba5efc17c8e5db835917080) | |||||
| CVE-2026-23259 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/rw: free potentially allocated iovec on cache put failure If a read/write request goes through io_req_rw_cleanup() and has an allocated iovec attached and fails to put to the rw_cache, then it may end up with an unaccounted iovec pointer. Have io_rw_recycle() return whether it recycled the request or not, and use that to gauge whether to free a potential iovec or not. | |||||
| CVE-2026-23254 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: gro: fix outer network offset The udp GRO complete stage assumes that all the packets inserted the RX have the `encapsulation` flag zeroed. Such assumption is not true, as a few H/W NICs can set such flag when H/W offloading the checksum for an UDP encapsulated traffic, the tun driver can inject GSO packets with UDP encapsulation and the problematic layout can also be created via a veth based setup. Due to the above, in the problematic scenarios, udp4_gro_complete() uses the wrong network offset (inner instead of outer) to compute the outer UDP header pseudo checksum, leading to csum validation errors later on in packet processing. Address the issue always clearing the encapsulation flag at GRO completion time. Such flag will be set again as needed for encapsulated packets by udp_gro_complete(). | |||||
| CVE-2026-23253 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: media: dvb-core: fix wrong reinitialization of ringbuffer on reopen dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which reinitializes the waitqueue list head to empty. Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the same DVR device share it), this orphans any existing waitqueue entries from io_uring poll or epoll, leaving them with stale prev/next pointers while the list head is reset to {self, self}. The waitqueue and spinlock in dvr_buffer are already properly initialized once in dvb_dmxdev_init(). The open path only needs to reset the buffer data pointer, size, and read/write positions. Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct assignment of data/size and a call to dvb_ringbuffer_reset(), which properly resets pread, pwrite, and error with correct memory ordering without touching the waitqueue or spinlock. | |||||
| CVE-2026-23252 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: xfs: get rid of the xchk_xfile_*_descr calls The xchk_xfile_*_descr macros call kasprintf, which can fail to allocate memory if the formatted string is larger than 16 bytes (or whatever the nofail guarantees are nowadays). Some of them could easily exceed that, and Jiaming Zhang found a few places where that can happen with syzbot. The descriptions are debugging aids and aren't required to be unique, so let's just pass in static strings and eliminate this path to failure. Note this patch touches a number of commits, most of which were merged between 6.6 and 6.14. | |||||
| CVE-2026-23241 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: audit: add missing syscalls to read class The "at" variant of getxattr() and listxattr() are missing from the audit read class. Calling getxattrat() or listxattrat() on a file to read its extended attributes will bypass audit rules such as: -w /tmp/test -p rwa -k test_rwa The current patch adds missing syscalls to the audit read class. | |||||
| CVE-2026-23236 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.3 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: smscufx: properly copy ioctl memory to kernelspace The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from userspace to kernelspace, and instead directly references the memory, which can cause problems if invalid data is passed from userspace. Fix this all up by correctly copying the memory before accessing it within the kernel. | |||||
| CVE-2026-23230 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: split cached_fid bitfields to avoid shared-byte RMW races is_open, has_lease and on_list are stored in the same bitfield byte in struct cached_fid but are updated in different code paths that may run concurrently. Bitfield assignments generate byte read–modify–write operations (e.g. `orb $mask, addr` on x86_64), so updating one flag can restore stale values of the others. A possible interleaving is: CPU1: load old byte (has_lease=1, on_list=1) CPU2: clear both flags (store 0) CPU1: RMW store (old | IS_OPEN) -> reintroduces cleared bits To avoid this class of races, convert these flags to separate bool fields. | |||||
| CVE-2026-23229 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: virtio - Add spinlock protection with virtqueue notification When VM boots with one virtio-crypto PCI device and builtin backend, run openssl benchmark command with multiple processes, such as openssl speed -evp aes-128-cbc -engine afalg -seconds 10 -multi 32 openssl processes will hangup and there is error reported like this: virtio_crypto virtio0: dataq.0:id 3 is not a head! It seems that the data virtqueue need protection when it is handled for virtio done notification. If the spinlock protection is added in virtcrypto_done_task(), openssl benchmark with multiple processes works well. | |||||
| CVE-2026-23222 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: crypto: omap - Allocate OMAP_CRYPTO_FORCE_COPY scatterlists correctly The existing allocation of scatterlists in omap_crypto_copy_sg_lists() was allocating an array of scatterlist pointers, not scatterlist objects, resulting in a 4x too small allocation. Use sizeof(*new_sg) to get the correct object size. | |||||
| CVE-2026-23215 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86/vmware: Fix hypercall clobbers Fedora QA reported the following panic: BUG: unable to handle page fault for address: 0000000040003e54 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20251119-3.fc43 11/19/2025 RIP: 0010:vmware_hypercall4.constprop.0+0x52/0x90 .. Call Trace: vmmouse_report_events+0x13e/0x1b0 psmouse_handle_byte+0x15/0x60 ps2_interrupt+0x8a/0xd0 ... because the QEMU VMware mouse emulation is buggy, and clears the top 32 bits of %rdi that the kernel kept a pointer in. The QEMU vmmouse driver saves and restores the register state in a "uint32_t data[6];" and as a result restores the state with the high bits all cleared. RDI originally contained the value of a valid kernel stack address (0xff5eeb3240003e54). After the vmware hypercall it now contains 0x40003e54, and we get a page fault as a result when it is dereferenced. The proper fix would be in QEMU, but this works around the issue in the kernel to keep old setups working, when old kernels had not happened to keep any state in %rdi over the hypercall. In theory this same issue exists for all the hypercalls in the vmmouse driver; in practice it has only been seen with vmware_hypercall3() and vmware_hypercall4(). For now, just mark RDI/RSI as clobbered for those two calls. This should have a minimal effect on code generation overall as it should be rare for the compiler to want to make RDI/RSI live across hypercalls. | |||||
| CVE-2026-23214 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: reject new transactions if the fs is fully read-only [BUG] There is a bug report where a heavily fuzzed fs is mounted with all rescue mount options, which leads to the following warnings during unmount: BTRFS: Transaction aborted (error -22) Modules linked in: CPU: 0 UID: 0 PID: 9758 Comm: repro.out Not tainted 6.19.0-rc5-00002-gb71e635feefc #7 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:find_free_extent_update_loop fs/btrfs/extent-tree.c:4208 [inline] RIP: 0010:find_free_extent+0x52f0/0x5d20 fs/btrfs/extent-tree.c:4611 Call Trace: <TASK> btrfs_reserve_extent+0x2cd/0x790 fs/btrfs/extent-tree.c:4705 btrfs_alloc_tree_block+0x1e1/0x10e0 fs/btrfs/extent-tree.c:5157 btrfs_force_cow_block+0x578/0x2410 fs/btrfs/ctree.c:517 btrfs_cow_block+0x3c4/0xa80 fs/btrfs/ctree.c:708 btrfs_search_slot+0xcad/0x2b50 fs/btrfs/ctree.c:2130 btrfs_truncate_inode_items+0x45d/0x2350 fs/btrfs/inode-item.c:499 btrfs_evict_inode+0x923/0xe70 fs/btrfs/inode.c:5628 evict+0x5f4/0xae0 fs/inode.c:837 __dentry_kill+0x209/0x660 fs/dcache.c:670 finish_dput+0xc9/0x480 fs/dcache.c:879 shrink_dcache_for_umount+0xa0/0x170 fs/dcache.c:1661 generic_shutdown_super+0x67/0x2c0 fs/super.c:621 kill_anon_super+0x3b/0x70 fs/super.c:1289 btrfs_kill_super+0x41/0x50 fs/btrfs/super.c:2127 deactivate_locked_super+0xbc/0x130 fs/super.c:474 cleanup_mnt+0x425/0x4c0 fs/namespace.c:1318 task_work_run+0x1d4/0x260 kernel/task_work.c:233 exit_task_work include/linux/task_work.h:40 [inline] do_exit+0x694/0x22f0 kernel/exit.c:971 do_group_exit+0x21c/0x2d0 kernel/exit.c:1112 __do_sys_exit_group kernel/exit.c:1123 [inline] __se_sys_exit_group kernel/exit.c:1121 [inline] __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1121 x64_sys_call+0x2210/0x2210 arch/x86/include/generated/asm/syscalls_64.h:232 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xe8/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x44f639 Code: Unable to access opcode bytes at 0x44f60f. RSP: 002b:00007ffc15c4e088 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00000000004c32f0 RCX: 000000000044f639 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001 RBP: 0000000000000001 R08: ffffffffffffffc0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004c32f0 R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 </TASK> Since rescue mount options will mark the full fs read-only, there should be no new transaction triggered. But during unmount we will evict all inodes, which can trigger a new transaction, and triggers warnings on a heavily corrupted fs. [CAUSE] Btrfs allows new transaction even on a read-only fs, this is to allow log replay happen even on read-only mounts, just like what ext4/xfs do. However with rescue mount options, the fs is fully read-only and cannot be remounted read-write, thus in that case we should also reject any new transactions. [FIX] If we find the fs has rescue mount options, we should treat the fs as error, so that no new transaction can be started. | |||||