Total
90 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-53175 | 1 Linux | 1 Linux Kernel | 2026-08-14 | N/A | 9.8 CRITICAL |
| In the Linux kernel, the following vulnerability has been resolved: inet: frags: fix use-after-free caused by the fqdir_pre_exit() flush On netns teardown, fqdir_pre_exit() walks the fqdir rhashtable and flushes every fragment queue that is not yet complete using inet_frag_queue_flush(). That helper frees all the skbs queued on the fragment queue but does not set INET_FRAG_COMPLETE, and leaves q->fragments_tail and q->last_run_head pointing at the freed skbs. The queue itself stays in the rhashtable. fqdir_pre_exit() first lowers high_thresh to 0 to stop new queue lookups, but it cannot stop a fragment that already obtained the queue through inet_frag_find() earlier and stalled just before taking the queue lock. Once that fragment resumes after the flush and takes the queue lock, it passes the INET_FRAG_COMPLETE check and then dereferences the freed fragments_tail. inet_frag_queue_insert() reads FRAG_CB() and ->len of that pointer and, on the append path, writes ->next_frag, causing a slab use-after-free. IPv6, nf_conntrack_reasm6 and 6lowpan reassembly share the same flush path and are affected as well. Reset rb_fragments, fragments_tail and last_run_head in inet_frag_queue_flush() so a flushed queue no longer points at the freed skbs. A fragment that resumes after the flush and takes the queue lock then finds an empty queue and starts a new run instead of dereferencing the freed fragments_tail. ip_frag_reinit() already performed this reset after its own flush, so drop the now duplicate code there. | |||||
| CVE-2026-6100 | 2026-08-13 | N/A | 8.1 HIGH | ||
| Use-after-free (UAF) was possible in the `lzma.LZMADecompressor`, `bz2.BZ2Decompressor`, and `gzip.GzipFile` when a memory allocation fails with a `MemoryError` and the decompression instance is re-used. This scenario can be triggered if the process is under memory pressure. The fix cleans up the dangling pointer in this specific error condition. The vulnerability is only present if the program re-uses decompressor instances across multiple decompression calls even after a `MemoryError` is raised during decompression. Using the helper functions to one-shot decompress data such as `lzma.decompress()`, `bz2.decompress()`, `gzip.decompress()`, and `zlib.decompress()` are not affected as a new decompressor instance is used per call. If the decompressor instance is not re-used after an error condition, this usage is similarly not vulnerable. | |||||
| CVE-2026-52976 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl() Two error handling issues exist in xe_exec_queue_create_ioctl(): 1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in preempt fence mode, xe_vm_add_compute_exec_queue() has already added the queue to the VM's compute exec queue list. Skipping the kill leaves the queue on that list, leading to a dangling pointer after the queue is freed. 2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has succeeded, the error path does not call xe_hw_engine_group_del_exec_queue() to remove the queue from the hw engine group list. The queue is then freed while still linked into the hw engine group, causing a use-after-free. Fix both by: - Changing the xe_hw_engine_group_add_exec_queue() failure path to jump to kill_exec_queue so that xe_exec_queue_kill() properly removes the queue from the VM's compute list. - Adding a del_hw_engine_group label before kill_exec_queue for the xa_alloc() failure path, which removes the queue from the hw engine group before proceeding with the rest of the cleanup. (cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8) | |||||
| CVE-2026-46243 | 1 Linux | 1 Linux Kernel | 2026-08-07 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject userspace cifs.spnego descriptions cifs.spnego key descriptions contain authority-bearing fields such as pid, uid, creduid, and upcall_target that cifs.upcall treats as kernel-originating inputs. However, userspace can also create keys of this type through request_key(2) or add_key(2), allowing those fields to be supplied without CIFS origin. Only accept cifs.spnego descriptions while CIFS is using its private spnego_cred to request the key. | |||||
| CVE-2026-10671 | 1 Zephyrproject | 1 Zephyr | 2026-08-06 | N/A | 7.1 HIGH |
| In Zephyr's kernel pipe implementation, the userspace syscall verifier z_vrfy_k_pipe_init() in kernel/pipe.c used K_SYSCALL_OBJ() (which requires the kernel object to already be initialized) instead of K_SYSCALL_OBJ_NEVER_INIT() (which rejects an already-initialized object). As a result, on CONFIG_USERSPACE builds an unprivileged user thread that has been granted access to a k_pipe object can invoke the k_pipe_init syscall to re-initialize a pipe that is already in use. z_impl_k_pipe_init() unconditionally resets the ring buffer, sets pipe->waiting to 0, and re-initializes both wait queues (z_waitq_init on pipe->data and pipe->space) without waking or accounting for threads currently blocked on the pipe. Any thread already pended in k_pipe_read()/k_pipe_write() is left orphaned: still marked pending with pended_on pointing at the cleared wait queue and with stale qnode_dlist links into the (now re-initialized) embedded list head. When such an orphaned waiter is later timed out or woken, the scheduler calls sys_dlist_remove() on its stale node, writing through dangling prev/next pointers into kernel wait-queue/scheduler structures, causing list corruption (an attacker-driven invalid kernel write), lost wakeups, indefinitely blocked threads, and silent data loss. The flaw lets a deprivileged user thread corrupt the state of a kernel object shared with other threads/partitions. The fix switches the verifier to K_SYSCALL_OBJ_NEVER_INIT(), matching the existing k_msgq_init verifier, so a user thread can no longer re-initialize a live pipe. The vulnerable code shipped in v4.1.0 and remained through v4.4.0. | |||||
| CVE-2026-8090 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-07-28 | N/A | 7.3 HIGH |
| Use-after-free in the DOM: Networking component. This vulnerability was fixed in Firefox 150.0.2, Firefox ESR 140.10.2, Firefox ESR 115.35.2, Thunderbird 150.0.2, and Thunderbird 140.10.2. | |||||
| CVE-2026-52950 | 1 Linux | 1 Linux Kernel | 2026-07-27 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/dma-buf: fix UAF with retry loop Retry doesn't work here, since bo will be freed on error, leading to UAF. However, now that we do the alloc & init before the attach, we can now combine this as one unit and have the init do the alloc for us. This should make the retry safe. Reported by Sashiko. v2: Fix up the error unwind (CI) (cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7) | |||||
| CVE-2026-44422 | 1 Freerdp | 1 Freerdp | 2026-07-27 | N/A | 7.5 HIGH |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.26.0, FreeRDP's RDPEAR NDR parser accepts one non-null NDR pointer ref-id for multiple logical pointer fields without tracking the pointed object's expected NDR type or ownership. When the same ref-id is reused across two pointer fields, the parser assigns the same heap object to both output fields. The generic destructor later walks each field independently and destroys/frees both pointers. This causes a malicious-server-triggerable heap use-after-free / double-free in the FreeRDP client's RDPEAR authentication-redirection path. This vulnerability is fixed in 3.26.0. | |||||
| CVE-2026-34774 | 1 Electronjs | 1 Electron | 2026-07-24 | N/A | 8.1 HIGH |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to versions 39.8.1, 40.7.0, and 41.0.0, apps that use offscreen rendering and allow child windows via window.open() may be vulnerable to a use-after-free. If the parent offscreen WebContents is destroyed while a child window remains open, subsequent paint frames on the child dereference freed memory, which may lead to a crash or memory corruption. Apps are only affected if they use offscreen rendering (webPreferences.offscreen: true) and their setWindowOpenHandler permits child windows. Apps that do not use offscreen rendering, or that deny child windows, are not affected. This issue has been patched in versions 39.8.1, 40.7.0, and 41.0.0. | |||||
| CVE-2026-31703 | 1 Linux | 1 Linux Kernel | 2026-07-24 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: writeback: Fix use after free in inode_switch_wbs_work_fn() inode_switch_wbs_work_fn() has a loop like: wb_get(new_wb); while (1) { list = llist_del_all(&new_wb->switch_wbs_ctxs); /* Nothing to do? */ if (!list) break; ... process the items ... } Now adding of items to the list looks like: wb_queue_isw() if (llist_add(&isw->list, &wb->switch_wbs_ctxs)) queue_work(isw_wq, &wb->switch_work); Because inode_switch_wbs_work_fn() loops when processing isw items, it can happen that wb->switch_work is pending while wb->switch_wbs_ctxs is empty. This is a problem because in that case wb can get freed (no isw items -> no wb reference) while the work is still pending causing use-after-free issues. We cannot just fix this by cancelling work when freeing wb because that could still trigger problematic 0 -> 1 transitions on wb refcount due to wb_get() in inode_switch_wbs_work_fn(). It could be all handled with more careful code but that seems unnecessarily complex so let's avoid that until it is proven that the looping actually brings practical benefit. Just remove the loop from inode_switch_wbs_work_fn() instead. That way when wb_queue_isw() queues work, we are guaranteed we have added the first item to wb->switch_wbs_ctxs and nobody is going to remove it (and drop the wb reference it holds) until the queued work runs. | |||||
| CVE-2026-6722 | 1 Php | 1 Php | 2026-07-24 | N/A | 9.8 CRITICAL |
| In PHP versions 8.2.* before 8.2.31, 8.3.* before 8.3.31, 8.4.* before 8.4.21, and 8.5.* before 8.5.6, the SOAP extension's object deduplication mechanism stores pointers to PHP objects in a global map without incrementing their reference counts. When an apache:Map node contains duplicate keys, processing the second entry overwrites the first in the temporary result map, freeing the original PHP object while its stale pointer remains in the map. A subsequent href reference to the freed node can copy the dangling pointer into the result. As PHP string allocations can reclaim the freed memory region, an attacker with control over the SOAP request body can exploit this use-after-free to achieve remote code execution. | |||||
| CVE-2026-53085 | 1 Linux | 1 Linux Kernel | 2026-07-23 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix mm lifecycle in open-coded task_vma iterator The open-coded task_vma iterator reads task->mm locklessly and acquires mmap_read_trylock() but never calls mmget(). If the task exits concurrently, the mm_struct can be freed as it is not SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free. Safely read task->mm with a trylock on alloc_lock and acquire an mm reference. Drop the reference via bpf_iter_mmput_async() in _destroy() and error paths. bpf_iter_mmput_async() is a local wrapper around mmput_async() with a fallback to mmput() on !CONFIG_MMU. Reject irqs-disabled contexts (including NMI) up front. Operations used by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async) take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from NMI or from a tracepoint that fires with those locks held could deadlock. A trylock on alloc_lock is used instead of the blocking task_lock() (get_task_mm) to avoid a deadlock when a softirq BPF program iterates a task that already holds its alloc_lock on the same CPU. | |||||
| CVE-2026-6040 | 2026-07-23 | N/A | 7.3 HIGH | ||
| A heap use-after-free existed when importing the blank-width characters of an ODF number format. A position value read from the document was not checked against the length of the format-code string, so a malformed number format could be processed against memory outside that string. In fixed versions the position is bounds-checked before use. | |||||
| CVE-2026-8854 | 3 Ibm, Linux, Microsoft | 5 Aix, Http Server, Z\/os and 2 more | 2026-07-23 | N/A | 7.5 HIGH |
| IBM HTTP Server 8.5, and 9.0 is vulnerable to denial of service via the optional module mod_mem_cache. | |||||
| CVE-2026-46523 | 1 Imagemagick | 1 Imagemagick | 2026-07-23 | N/A | 6.2 MEDIUM |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2.23 and 6.9.13-48, a crafted MSL image can trigger a heap-use-after-free. Versions 7.1.2.23 and 6.9.13-48 fix the issue. | |||||
| CVE-2026-53033 | 1 Linux | 1 Linux Kernel | 2026-07-15 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Take state lock for af_unix iter When a BPF iterator program updates a sockmap, there is a race condition in unix_stream_bpf_update_proto() where the `peer` pointer can become stale[1] during a state transition TCP_ESTABLISHED -> TCP_CLOSE. CPU0 bpf CPU1 close -------- ---------- // unix_stream_bpf_update_proto() sk_pair = unix_peer(sk) if (unlikely(!sk_pair)) return -EINVAL; // unix_release_sock() skpair = unix_peer(sk); unix_peer(sk) = NULL; sock_put(skpair) sock_hold(sk_pair) // UaF More practically, this fix guarantees that the iterator program is consistently provided with a unix socket that remains stable during iterator execution. [1]: BUG: KASAN: slab-use-after-free in unix_stream_bpf_update_proto+0x155/0x490 Write of size 4 at addr ffff8881178c9a00 by task test_progs/2231 Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x170/0x4f3 kasan_report+0xe4/0x1c0 kasan_check_range+0x125/0x200 unix_stream_bpf_update_proto+0x155/0x490 sock_map_link+0x71c/0xec0 sock_map_update_common+0xbc/0x600 sock_map_update_elem+0x19a/0x1f0 bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217 bpf_iter_run_prog+0x21e/0xae0 bpf_iter_unix_seq_show+0x1e0/0x2a0 bpf_seq_read+0x42c/0x10d0 vfs_read+0x171/0xb20 ksys_read+0xff/0x200 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x63/0x80 kmem_cache_alloc_noprof+0x1d5/0x680 sk_prot_alloc+0x59/0x210 sk_alloc+0x34/0x470 unix_create1+0x86/0x8a0 unix_stream_connect+0x318/0x15b0 __sys_connect+0xfd/0x130 __x64_sys_connect+0x72/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x47/0x70 kmem_cache_free+0x11c/0x590 __sk_destruct+0x432/0x6e0 unix_release_sock+0x9b3/0xf60 unix_release+0x8a/0xf0 __sock_release+0xb0/0x270 sock_close+0x18/0x20 __fput+0x36e/0xac0 fput_close_sync+0xe5/0x1a0 __x64_sys_close+0x7d/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e | |||||
| CVE-2026-12328 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-07-15 | N/A | 8.1 HIGH |
| Memory safety bugs present in Firefox ESR 115.36, Firefox ESR 140.11, Thunderbird ESR 140.11, Firefox 151 and Thunderbird 151. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 152, Firefox ESR 140.12, Firefox ESR 115.37, Thunderbird 152, and Thunderbird 140.12. | |||||
| CVE-2026-12291 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-07-15 | N/A | 8.8 HIGH |
| Use-after-free in the Networking: HTTP component. This vulnerability was fixed in Firefox 152, Firefox ESR 140.12, Firefox ESR 115.37, Thunderbird 152, and Thunderbird 140.12. | |||||
| CVE-2026-4729 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-07-15 | N/A | 9.8 CRITICAL |
| Memory safety bugs present in Firefox 148 and Thunderbird 148. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 149 and Thunderbird 149. | |||||
| CVE-2026-4721 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-07-15 | N/A | 9.8 CRITICAL |
| Memory safety bugs present in Firefox ESR 115.33, Firefox ESR 140.8, Thunderbird ESR 140.8, Firefox 148 and Thunderbird 148. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 149, Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird 149, and Thunderbird 140.9. | |||||