Total
2712 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-59303 | 1 Vmware | 1 Spring Cloud Stream | 2026-09-04 | N/A | 3.1 LOW |
| Dynamic destination cache size is not properly bound in Spring Cloud Stream. Spring Cloud Stream 5.0.0 - 5.0.2 Spring Cloud Stream 4.3.0 - 4.3.3 Spring Cloud Stream 4.2.0 - 4.2.6 | |||||
| CVE-2026-14514 | 1 Ibm | 1 Reliable Scalable Cluster Technology | 2026-09-04 | N/A | 6.5 MEDIUM |
| IBM Reliable Scalable Cluster Technology (RSCT) 3.0 could allow a remote attacker to cause a denial of service by sending a specially crafted request due improper input validation. | |||||
| CVE-2026-56855 | 1 Golang | 1 Crypto | 2026-09-04 | N/A | 7.5 HIGH |
| Previously, after a channel has been established, a malicious peer could send crafted messages that would deadlock the entire connection. Now, we handle all RFC 4254 channel messages; global requests are handled explicitly. Then, treat all other messages as a protocol error and tear the connection down instead of buffering and blocking. | |||||
| CVE-2026-78662 | 1 Golang | 1 Crypto | 2026-09-04 | N/A | 7.5 HIGH |
| Previously, a channel registered in the mux's chanList is not usable until it is established. A malicious peer was able flood the channel's incomingRequests, deadlocking the entire connection. Now, we add an atomic established state, set when a channel becomes usable. Until such a time, handlePacket drops every packet other than the open confirmation/failure, without blocking and without tearing down the connection. | |||||
| CVE-2026-84776 | 2026-09-04 | N/A | 7.5 HIGH | ||
| Unauthenticated Denial of Service Attack in MalCare Security <= 6.69 versions. | |||||
| CVE-2026-32141 | 1 Webreflection | 1 Flatted | 2026-09-04 | N/A | 7.5 HIGH |
| flatted is a circular JSON parser. Prior to 3.4.0, flatted's parse() function uses a recursive revive() phase to resolve circular references in deserialized JSON. When given a crafted payload with deeply nested or self-referential $ indices, the recursion depth is unbounded, causing a stack overflow that crashes the Node.js process. This vulnerability is fixed in 3.4.0. | |||||
| CVE-2026-1526 | 1 Nodejs | 1 Undici | 2026-09-04 | N/A | 7.5 HIGH |
| The undici WebSocket client is vulnerable to a denial-of-service attack via unbounded memory consumption during permessage-deflate decompression. When a WebSocket connection negotiates the permessage-deflate extension, the client decompresses incoming compressed frames without enforcing any limit on the decompressed data size. A malicious WebSocket server can send a small compressed frame (a "decompression bomb") that expands to an extremely large size in memory, causing the Node.js process to exhaust available memory and crash or become unresponsive. The vulnerability exists in the PerMessageDeflate.decompress() method, which accumulates all decompressed chunks in memory and concatenates them into a single Buffer without checking whether the total size exceeds a safe threshold. | |||||
| CVE-2026-84780 | 2026-09-04 | N/A | 5.3 MEDIUM | ||
| Unauthenticated Denial of Service Attack in WP Go Maps <= 10.1.08 versions. | |||||
| CVE-2026-78588 | 1 Elastic | 1 Filebeat | 2026-09-03 | N/A | 6.5 MEDIUM |
| Allocation of Resources Without Limits or Throttling (CWE-770) in Filebeat can lead to a denial of service via Excessive Allocation (CAPEC-130). An attacker able to reach the Filebeat HTTP ingestion endpoint could send specially crafted compressed requests that exhaust the memory resources of the Filebeat process. | |||||
| CVE-2026-82562 | 2026-09-03 | N/A | 3.7 LOW | ||
| ### Summary When `qs.parse` is called with `comma: true` and `throwOnLimitExceeded: true`, a comma-separated value under a bracket-push key (`a[]=1,2,3,4`) is split into an array without being compared against `arrayLimit`, while the same value under a flat key (`a=1,2,3,4`), an indexed key (`a[0]=`), a nested key (`a[b]=`), or a dotted key (`a.b=` with `allowDots`) throws the documented `RangeError`. A single parameter such as `a[]=1,2,2,...` therefore produces an inner array of arbitrary length even though the caller opted into the hard limit. This is the `[]=` key form that the fix for CVE-2026-2391 (qs 6.14.2) did not cover. ### Details In `lib/parse.js`, a comma-separated value under a `[]=` key is split and then wrapped as a single nested element (`val = [val]`, so that each `a[]=x,y` group counts as one element of the outer array). The `arrayLimit` check that 6.14.2 added for comma values runs after that wrap, so for `[]=` parts it only ever saw the wrapper of length 1. 6.15.3 added a pre-split comma count so that an oversized value throws before it is allocated, but gated it on an `isFlatArrayValue` flag that `parseValues` set to `false` for any part containing `[]=`, and did not pass it for object-valued input, so the gap remained. #### PoC ```js var qs = require('qs'); var options = { comma: true, arrayLimit: 3, throwOnLimitExceeded: true }; qs.parse('a=1,2,3,4', options); // RangeError: Array limit exceeded. Only 3 elements allowed in an array. qs.parse('a[]=1,2,3,4', options); // { a: [ [ '1', '2', '3', '4' ] ] } (no throw) qs.parse('a[]=' + '1,'.repeat(1000000) + '1', { comma: true, arrayLimit: 20, throwOnLimitExceeded: true }); // no throw; a 1,000,001-element inner array is allocated ``` #### Fix `lib/parse.js`, applied in 8859c37 on `main` and released as v6.16.0: the `isFlatArrayValue` gate is removed, so every comma-split value is counted against `arrayLimit` before splitting regardless of key form. An in-limit group under `a[]=` still counts as one element of the outer array, and the default (`throwOnLimitExceeded: false`) path is unchanged. ### Affected versions `>=6.14.2 <6.16.0`, fixed in v6.16.0. v6.14.2 introduced `arrayLimit` enforcement for comma values (the fix for CVE-2026-2391) but only for values not under a `[]=` key, and every release from v6.14.2 through v6.15.3 has the same gap. v6.14.0 and v6.14.1, where `throwOnLimitExceeded` exists but does not apply to any comma form, are covered by CVE-2026-2391 rather than this record. Earlier lines (6.7.x through 6.13.x) have `comma` but no `throwOnLimitExceeded`, so there is no hard cap on any comma path to bypass; releases before 6.7.0 have no `comma` option. ### Impact An unauthenticated attacker who can reach an application that parses untrusted query strings or urlencoded bodies with both `comma: true` and `throwOnLimitExceeded: true` (both non-default) can bypass the configured limit with a single `a[]=` parameter and force the parser to allocate an array proportional to the request size. The cost is strictly linear in the attacker-supplied bytes (about 0.1 microseconds and 6 to 7 retained bytes per input byte; the same out-of-memory threshold as the documented default `throwOnLimitExceeded: false` path), so a transport-layer request or body size limit bounds it completely (and node's default maximum HTTP header size of 16 KB already bounds the request line, so multi-megabyte payloads need a body parser). The impact is that an opt-in hard limit fails open on one key spelling, not unbounded allocation from a small input. | |||||
| CVE-2026-85107 | 2026-09-03 | 5.0 MEDIUM | 4.3 MEDIUM | ||
| A vulnerability was found in NousResearch hermes-agent 0.18.0. This vulnerability affects the function resourceBufferFromUrl of the file apps/desktop/electron/main.ts of the component Electron Main Process. Performing a manipulation results in allocation of resources. The attack may be initiated remotely. copyImageFromUrl() entry point no longer reachable on current main. That function did exist at v2026.8.3 but was removed by v2026.8.19. The modern copy-image path is Electron-native event.sender.copyImageAt(). | |||||
| CVE-2026-19873 | 2026-09-03 | N/A | 7.5 HIGH | ||
| HTML::FormFu versions through 2.08 for Perl allow resource exhaustion via an unbounded repeat count from the query string in Repeatable elements. When a Repeatable element has counter_name set, its process method reads the repeat count from the named query string parameter, checks only that it is a positive integer, and passes it to repeat, which deep-clones the element's child subtree once per iteration. Nothing caps the value, and no attribute lets an application impose a limit. The count is read on every request, before the form decides whether it was submitted, so a plain GET reaches the clone loop with no credentials, no session and no request body. Nesting multiplies: a Repeatable inside a Repeatable takes a counter at each level, so an outer and an inner value of 100 build 10,000 clones. Once the form is submitted, each cloned field's constraints scan the whole element tree in _find_field_value, so cost grows faster than linearly with the count. A single request exhausts memory and CPU. The latest release on CPAN is 2.07, from 2018. Version 2.08 exists only in the git repository. | |||||
| CVE-2026-56859 | 2026-09-03 | N/A | 7.5 HIGH | ||
| Previously, DecodeElement would reset the depth counter causing it to never fire; this could lead to stack exhaustion. | |||||
| CVE-2026-56853 | 2026-09-03 | N/A | 7.5 HIGH | ||
| When a server is configured to support unencrypted HTTP/2, it reads a few bytes from each new connection to see if they contain the HTTP/2 client preface. ReadHeaderTimeout is unexpectedly not being applied when doing this. | |||||
| CVE-2026-81699 | 1 Jahlives | 1 Openssl Encrypt | 2026-09-03 | N/A | 7.5 HIGH |
| openssl_encrypt versions before 1.4.9 fail to properly validate key derivation function costs in crafted files, allowing attackers to trigger unbounded memory and CPU exhaustion during pre-authentication processing. Attackers can supply malicious files with excessive KDF parameters to exhaust system resources and crash or wedge the process before password verification occurs. | |||||
| CVE-2026-78586 | 1 Elastic | 1 Kibana | 2026-09-03 | N/A | 6.5 MEDIUM |
| Allocation of Resources Without Limits or Throttling (CWE-770) in Kibana can lead to a denial of service via Excessive Allocation (CAPEC-130). An authenticated user with low-level privileges could submit a specially crafted request that causes Kibana to consume an unbounded amount of memory, rendering it unavailable to all users. | |||||
| CVE-2026-47891 | 1 Vmware | 1 Spring Framework | 2026-09-02 | N/A | 9.8 CRITICAL |
| A Spring WebFlux application that relies on the Aalto XML processor to parse XML input does not correctly enforce the maxInMemorySize limit. Spring Framework 7.0.0 - 7.0.8 Spring Framework 6.2.0 - 6.2.19 Spring Framework 6.1.0 - 6.1.28 Spring Framework 6.0.0 - 6.0.30 Spring Framework 5.3.0 - 5.3.49 Spring Framework 5.2.25.RELEASE and earlier | |||||
| CVE-2026-59289 | 1 Vmware | 1 Spring For Graphql | 2026-09-02 | N/A | 7.5 HIGH |
| Spring for GraphQL's Spring Data pagination support resolves arguments of a scrollable query and forwards the client-supplied values to the underlying repository. An attacker can forge a malicious query for a Connection field that can exhaust application memory or place significant, prolonged load on the underlying datastore, resulting in a Denial of Service. Spring for GraphQL 2.0.0 - 2.0.4 Spring for GraphQL 1.4.0 - 1.4.6 Spring for GraphQL 1.2.0 - 1.3.9 | |||||
| CVE-2026-59287 | 1 Vmware | 1 Spring For Graphql | 2026-09-02 | N/A | 5.9 MEDIUM |
| Spring for GraphQL is vulnerable to Denial of Service attacks when using the WebSocket client with keepAlive enabled. Spring for GraphQL 2.0.0 - 2.0.4 Spring for GraphQL 1.4.0 - 1.4.6 Spring for GraphQL 1.3.0 - 1.3.9 | |||||
| CVE-2026-47874 | 1 Pivotal | 1 Reactor Netty | 2026-09-02 | N/A | 5.3 MEDIUM |
| The vulnerability occurs when a client sends HTTP/1.1 pipelined requests over a single connection, causing the Reactor Netty HTTP server to consume an excessive amount of memory. Reactor Netty 1.3.0 - 1.3.6 Reactor Netty 1.1.0 - 1.2.18 Reactor Netty 1.0.52 and earlier | |||||