Total
742 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2020-3315 | 1 Cisco | 19 1100-4g Integrated Services Router, 1100-6g Integrated Services Router, 1100-lte Integrated Services Router and 16 more | 2026-08-11 | 5.0 MEDIUM | 5.3 MEDIUM |
| Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass the configured file policies on an affected system. The vulnerability is due to errors in how the Snort detection engine handles specific HTTP responses. An attacker could exploit this vulnerability by sending crafted HTTP packets that would flow through an affected system. A successful exploit could allow the attacker to bypass the configured file policies and deliver a malicious payload to the protected network. | |||||
| CVE-2021-34761 | 1 Cisco | 3 Firepower Management Center Virtual Appliance, Secure Firewall Threat Defense, Sourcefire Defense Center | 2026-08-11 | 6.6 MEDIUM | 4.4 MEDIUM |
| A vulnerability in Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to overwrite or append arbitrary data to system files using root-level privileges. The attacker must have administrative credentials on the device. This vulnerability is due to incomplete validation of user input for a specific CLI command. An attacker could exploit this vulnerability by authenticating to the device with administrative privileges and issuing a CLI command with crafted user parameters. A successful exploit could allow the attacker to overwrite or append arbitrary data to system files using root-level privileges. | |||||
| CVE-2026-44008 | 1 Vm2 Project | 1 Vm2 | 2026-08-06 | N/A | 9.8 CRITICAL |
| vm2 is an open source vm/sandbox for Node.js. Prior to 3.11.2, the new method neutralizeArraySpeciesBatch works with objects from the other side but can call into this side via getter on the array prototype exposing objects of the wrong side into the sandbox. This can be used to get host objects and get the host Function object. This allows attackers to write code which can escape from the VM2 sandbox and execute arbitrary commands on the host system. This vulnerability is fixed in 3.11.2. | |||||
| CVE-2024-43881 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 8.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: change DMA direction while mapping reinjected packets For fragmented packets, ath12k reassembles each fragment as a normal packet and then reinjects it into HW ring. In this case, the DMA direction should be DMA_TO_DEVICE, not DMA_FROM_DEVICE. Otherwise, an invalid payload may be reinjected into the HW and subsequently delivered to the host. Given that arbitrary memory can be allocated to the skb buffer, knowledge about the data contained in the reinjected buffer is lacking. Consequently, there’s a risk of private information being leaked. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 | |||||
| CVE-2024-36032 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 8.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix info leak when fetching fw build id Add the missing sanity checks and move the 255-byte build-id buffer off the stack to avoid leaking stack data through debugfs in case the build-info reply is malformed. | |||||
| CVE-2021-47401 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ipack: ipoctal: fix stack information leak The tty driver name is used also after registering the driver and must specifically not be allocated on the stack to avoid leaking information to user space (or triggering an oops). Drivers should not try to encode topology information in the tty device name but this one snuck in through staging without anyone noticing and another driver has since copied this malpractice. Fixing the ABI is a separate issue, but this at least plugs the security hole. | |||||
| CVE-2021-46921 | 1 Linux | 1 Linux Kernel | 2026-08-04 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: locking/qrwlock: Fix ordering in queued_write_lock_slowpath() While this code is executed with the wait_lock held, a reader can acquire the lock without holding wait_lock. The writer side loops checking the value with the atomic_cond_read_acquire(), but only truly acquires the lock when the compare-and-exchange is completed successfully which isn’t ordered. This exposes the window between the acquire and the cmpxchg to an A-B-A problem which allows reads following the lock acquisition to observe values speculatively before the write lock is truly acquired. We've seen a problem in epoll where the reader does a xchg while holding the read lock, but the writer can see a value change out from under it. Writer | Reader -------------------------------------------------------------------------------- ep_scan_ready_list() | |- write_lock_irq() | |- queued_write_lock_slowpath() | |- atomic_cond_read_acquire() | | read_lock_irqsave(&ep->lock, flags); --> (observes value before unlock) | chain_epi_lockless() | | epi->next = xchg(&ep->ovflist, epi); | | read_unlock_irqrestore(&ep->lock, flags); | | | atomic_cmpxchg_relaxed() | |-- READ_ONCE(ep->ovflist); | A core can order the read of the ovflist ahead of the atomic_cmpxchg_relaxed(). Switching the cmpxchg to use acquire semantics addresses this issue at which point the atomic_cond_read can be switched to use relaxed semantics. [peterz: use try_cmpxchg()] | |||||
| CVE-2026-48499 | 2026-07-30 | N/A | N/A | ||
| Activepieces is an open source AI workflow automation platform. Prior to 0.84.0, an unsanitized path segment in the Code piece sandbox can let an authenticated flow author reach read-write cached flow and code files belonging to other tenants on the same worker, exposing embedded data and allowing modified code to execute on a victim tenant's next flow run. This issue is fixed in version 0.84.0. | |||||
| CVE-2026-54727 | 2026-07-30 | N/A | 8.2 HIGH | ||
| proot-distro is a utility for managing proot containers. Prior to version 5.1.6, proot-distro restore accepted hardlink entries whose linkname referenced another installed container and did not verify that the hardlink source container matched the destination container being restored, allowing a crafted restore archive to copy files between otherwise isolated containers. This issue is fixed in version 5.1.6. | |||||
| CVE-2026-67427 | 2026-07-30 | N/A | 8.6 HIGH | ||
| Flyto2 Core is an execution kernel for automation and AI-agent workflows. Prior to 2.26.6, the workflow engine variable resolver expands ${env.VAR} for any host environment variable without an allowlist or capability policy check, allowing a workflow parameter to bypass the default capability policy denylist for env.get and env.load_dotenv and exfiltrate secrets through allowed modules. This issue is fixed in version 2.26.6. | |||||
| CVE-2025-38670 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: arm64/entry: Mask DAIF in cpu_switch_to(), call_on_irq_stack() `cpu_switch_to()` and `call_on_irq_stack()` manipulate SP to change to different stacks along with the Shadow Call Stack if it is enabled. Those two stack changes cannot be done atomically and both functions can be interrupted by SErrors or Debug Exceptions which, though unlikely, is very much broken : if interrupted, we can end up with mismatched stacks and Shadow Call Stack leading to clobbered stacks. In `cpu_switch_to()`, it can happen when SP_EL0 points to the new task, but x18 stills points to the old task's SCS. When the interrupt handler tries to save the task's SCS pointer, it will save the old task SCS pointer (x18) into the new task struct (pointed to by SP_EL0), clobbering it. In `call_on_irq_stack()`, it can happen when switching from the task stack to the IRQ stack and when switching back. In both cases, we can be interrupted when the SCS pointer points to the IRQ SCS, but SP points to the task stack. The nested interrupt handler pushes its return addresses on the IRQ SCS. It then detects that SP points to the task stack, calls `call_on_irq_stack()` and clobbers the task SCS pointer with the IRQ SCS pointer, which it will also use ! This leads to tasks returning to addresses on the wrong SCS, or even on the IRQ SCS, triggering kernel panics via CONFIG_VMAP_STACK or FPAC if enabled. This is possible on a default config, but unlikely. However, when enabling CONFIG_ARM64_PSEUDO_NMI, DAIF is unmasked and instead the GIC is responsible for filtering what interrupts the CPU should receive based on priority. Given the goal of emulating NMIs, pseudo-NMIs can be received by the CPU even in `cpu_switch_to()` and `call_on_irq_stack()`, possibly *very* frequently depending on the system configuration and workload, leading to unpredictable kernel panics. Completely mask DAIF in `cpu_switch_to()` and restore it when returning. Do the same in `call_on_irq_stack()`, but restore and mask around the branch. Mask DAIF even if CONFIG_SHADOW_CALL_STACK is not enabled for consistency of behaviour between all configurations. Introduce and use an assembly macro for saving and masking DAIF, as the existing one saves but only masks IF. | |||||
| CVE-2025-22069 | 1 Linux | 1 Linux Kernel | 2026-07-30 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: riscv: fgraph: Fix stack layout to match __arch_ftrace_regs argument of ftrace_return_to_handler Naresh Kamboju reported a "Bad frame pointer" kernel warning while running LTP trace ftrace_stress_test.sh in riscv. We can reproduce the same issue with the following command: ``` $ cd /sys/kernel/debug/tracing $ echo 'f:myprobe do_nanosleep%return args1=$retval' > dynamic_events $ echo 1 > events/fprobes/enable $ echo 1 > tracing_on $ sleep 1 ``` And we can get the following kernel warning: [ 127.692888] ------------[ cut here ]------------ [ 127.693755] Bad frame pointer: expected ff2000000065be50, received ba34c141e9594000 [ 127.693755] from func do_nanosleep return to ffffffff800ccb16 [ 127.698699] WARNING: CPU: 1 PID: 129 at kernel/trace/fgraph.c:755 ftrace_return_to_handler+0x1b2/0x1be [ 127.699894] Modules linked in: [ 127.700908] CPU: 1 UID: 0 PID: 129 Comm: sleep Not tainted 6.14.0-rc3-g0ab191c74642 #32 [ 127.701453] Hardware name: riscv-virtio,qemu (DT) [ 127.701859] epc : ftrace_return_to_handler+0x1b2/0x1be [ 127.702032] ra : ftrace_return_to_handler+0x1b2/0x1be [ 127.702151] epc : ffffffff8013b5e0 ra : ffffffff8013b5e0 sp : ff2000000065bd10 [ 127.702221] gp : ffffffff819c12f8 tp : ff60000080853100 t0 : 6e00000000000000 [ 127.702284] t1 : 0000000000000020 t2 : 6e7566206d6f7266 s0 : ff2000000065bd80 [ 127.702346] s1 : ff60000081262000 a0 : 000000000000007b a1 : ffffffff81894f20 [ 127.702408] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000 [ 127.702470] a5 : 0000000000000000 a6 : 0000000000000008 a7 : 0000000000000038 [ 127.702530] s2 : ba34c141e9594000 s3 : 0000000000000000 s4 : ff2000000065bdd0 [ 127.702591] s5 : 00007fff8adcf400 s6 : 000055556dc1d8c0 s7 : 0000000000000068 [ 127.702651] s8 : 00007fff8adf5d10 s9 : 000000000000006d s10: 0000000000000001 [ 127.702710] s11: 00005555737377c8 t3 : ffffffff819d899e t4 : ffffffff819d899e [ 127.702769] t5 : ffffffff819d89a0 t6 : ff2000000065bb18 [ 127.702826] status: 0000000200000120 badaddr: 0000000000000000 cause: 0000000000000003 [ 127.703292] [<ffffffff8013b5e0>] ftrace_return_to_handler+0x1b2/0x1be [ 127.703760] [<ffffffff80017bce>] return_to_handler+0x16/0x26 [ 127.704009] [<ffffffff80017bb8>] return_to_handler+0x0/0x26 [ 127.704057] [<ffffffff800d3352>] common_nsleep+0x42/0x54 [ 127.704117] [<ffffffff800d44a2>] __riscv_sys_clock_nanosleep+0xba/0x10a [ 127.704176] [<ffffffff80901c56>] do_trap_ecall_u+0x188/0x218 [ 127.704295] [<ffffffff8090cc3e>] handle_exception+0x14a/0x156 [ 127.705436] ---[ end trace 0000000000000000 ]--- The reason is that the stack layout for constructing argument for the ftrace_return_to_handler in the return_to_handler does not match the __arch_ftrace_regs structure of riscv, leading to unexpected results. | |||||
| CVE-2026-54497 | 1 Viewcomponent | 1 View Component | 2026-07-29 | N/A | 6.8 MEDIUM |
| view_component is a framework for building reusable, testable, and encapsulated view components in Ruby on Rails. From 4.0.0 until 4.12.0, ViewComponent::Base instances retain render-scoped objects across calls to render_in; if the same component, collection, or spacer component instance is reused across requests, users, tenants, or threads, later renders can use stale helpers, controller, request, view_flow, format/variant details, and slot child context from an earlier render. This can cause authorization-aware components to render privileged UI for a lower-privileged user, generate links using a stale Host header, leak slot/helper state, and mix request context under concurrent rendering. This issue is fixed in version 4.12.0. | |||||
| CVE-2026-34765 | 1 Electronjs | 1 Electron | 2026-07-24 | N/A | 6.0 MEDIUM |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 39.8.5, 40.8.5, 41.1.0, and 42.0.0-alpha.5, when a renderer calls window.open() with a target name, Electron did not correctly scope the named-window lookup to the opener's browsing context group. A renderer could navigate an existing child window that was opened by a different, unrelated renderer if both used the same target name. If that existing child was created with more permissive webPreferences (via setWindowOpenHandler's overrideBrowserWindowOptions), content loaded by the second renderer inherits those permissions. Apps are only affected if they open multiple top-level windows with differing trust levels and use setWindowOpenHandler to grant child windows elevated webPreferences such as a privileged preload script. Apps that do not elevate child window privileges, or that use a single top-level window, are not affected. Apps that additionally grant nodeIntegration: true or sandbox: false to child windows (contrary to the security recommendations) may be exposed to arbitrary code execution. This vulnerability is fixed in 39.8.5, 40.8.5, 41.1.0, and 42.0.0-alpha.5. | |||||
| CVE-2026-34780 | 1 Electronjs | 1 Electron | 2026-07-24 | N/A | 8.3 HIGH |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. From versions 39.0.0-alpha.1 to before 39.8.0, 40.0.0-alpha.1 to before 40.7.0, and 41.0.0-alpha.1 to before 41.0.0-beta.8, apps that pass VideoFrame objects (from the WebCodecs API) across the contextBridge are vulnerable to a context isolation bypass. An attacker who can execute JavaScript in the main world (for example, via XSS) can use a bridged VideoFrame to gain access to the isolated world, including any Node.js APIs exposed to the preload script. Apps are only affected if a preload script returns, resolves, or passes a VideoFrame object to the main world via contextBridge.exposeInMainWorld(). Apps that do not bridge VideoFrame objects are not affected. This issue has been patched in versions 39.8.0, 40.7.0, and 41.0.0-beta.8. | |||||
| CVE-2026-41362 | 1 Openclaw | 1 Openclaw | 2026-07-24 | N/A | 4.3 MEDIUM |
| OpenClaw versions 2026.2.19 before 2026.3.31 contain an improper cache isolation vulnerability in the Zalo webhook replay-dedupe mechanism that is shared across authenticated webhook targets. Attackers controlling one authenticated Zalo webhook path in multi-account deployments can suppress legitimate events on different accounts by matching event_name and message_id parameters. | |||||
| CVE-2026-41368 | 1 Openclaw | 1 Openclaw | 2026-07-24 | N/A | 6.5 MEDIUM |
| OpenClaw before 2026.3.28 contains an environment variable disclosure vulnerability in the jq safe-bin policy that fails to block the $ENV filter. Attackers can bypass safe-bin restrictions by using $ENV in jq programs to access sensitive environment variables that should be restricted. | |||||
| CVE-2026-41369 | 1 Openclaw | 1 Openclaw | 2026-07-24 | N/A | 6.5 MEDIUM |
| OpenClaw before 2026.3.31 contains insufficient environment variable sanitization in host exec operations, failing to filter package, registry, Docker, compiler, and TLS override variables. Attackers can exploit this by injecting malicious environment variables to override critical system configurations and compromise host execution integrity. | |||||
| CVE-2026-46430 | 2026-07-24 | N/A | 4.3 MEDIUM | ||
| Algernon is a small self-contained pure-Go web server. Prior to 1.17.7, the SSE event server bound to 0.0.0.0:5553 on Linux/macOS by default because the platform-dependent host default in engine/flags.go:39-46 set host = "" for non-Windows, and utils.JoinHostPort("", ":5553") resolves to ":5553". This vulnerability is fixed in 1.17.7. | |||||
| CVE-2026-53826 | 1 Openclaw | 1 Openclaw | 2026-07-23 | N/A | 4.3 MEDIUM |
| OpenClaw before 2026.4.26 contains an information disclosure vulnerability in sandboxed session spawning that exposes the real workspace path to child prompts. Attackers can exploit this by spawning child sessions from sandboxed parents to reveal host workspace location or related memory context to child models. | |||||