Total
5652 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-46114 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Reject non-8-byte ATOMIC_WRITE payloads atomic_write_reply() at drivers/infiniband/sw/rxe/rxe_resp.c unconditionally dereferences 8 bytes at payload_addr(pkt): value = *(u64 *)payload_addr(pkt); check_rkey() previously accepted an ATOMIC_WRITE request with pktlen == resid == 0 because the length validation only compared pktlen against resid. A remote initiator that sets the RETH length to 0 therefore reaches atomic_write_reply() with a zero-byte logical payload, and the responder reads sizeof(u64) bytes from past the logical end of the packet into skb->head tailroom, then writes those 8 bytes into the attacker's MR via rxe_mr_do_atomic_write(). That is a remote disclosure of 4 bytes of kernel tailroom per probe (the other 4 bytes are the packet's own trailing ICRC). IBA oA19-28 defines ATOMIC_WRITE as exactly 8 bytes. Anything else is protocol-invalid. Hoist a strict length check into check_rkey() so the responder never reaches the unchecked dereference, and keep the existing WRITE-family length logic for the normal RDMA WRITE path. Reproduced on mainline with an unmodified rxe driver: a sustained zero-length ATOMIC_WRITE probe repeatedly leaks adjacent skb head-buffer bytes into the attacker's MR, including recognisable kernel strings and partial kernel-direct-map pointer words. With this patch applied the responder rejects the PDU and the MR stays all-zero. | |||||
| CVE-2026-46118 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pseries/papr-hvpipe: Fix null ptr deref in papr_hvpipe_dev_create_handle() commit 6d3789d347a7 ("papr-hvpipe: convert papr_hvpipe_dev_create_handle() to FD_PREPARE()"), changed the create handle to FD_PREPARE(), but it caused kernel null-ptr-deref because after call to retain_and_null_ptr(src_info), src_info is re-used for adding it to the global list. Getting the following kernel panic in papr_hvpipe_dev_create_handle() when trying to add src_info to the list. Kernel attempted to write user page (0) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on write at 0x00000000 Faulting instruction address: 0xc0000000001b44a0 Oops: Kernel access of bad area, sig: 11 [#1] ... Call Trace: papr_hvpipe_dev_ioctl+0x1f4/0x48c (unreliable) sys_ioctl+0x528/0x1064 system_call_exception+0x128/0x360 system_call_vectored_common+0x15c/0x2ec Now, the error handling with FD_PREPARE's file cleanup and __free(kfree) auto cleanup is getting too convoluted. This is mainly because we need to ensure only 1 user get the srcID handle. To simplify this, we allocate prepare the src_info in the beginning and add it to the global list under a spinlock after checking that no duplicates exist. This simplify the error handling where if the FD_ADD fails, we can simply remove the src_info from the list and consume any pending msg in hvpipe to be cleared, after src_info became visible in the global list. | |||||
| CVE-2026-46127 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/ocrdma: Don't NULL deref uctx on errors in ocrdma_copy_pd_uresp() Sashiko points out that pd->uctx isn't initialized until late in the function so all these error flow references are NULL and will crash. Use the uctx that isn't NULL. | |||||
| CVE-2026-45911 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: cdns3: fix role switching during resume If the role change while we are suspended, the cdns3 driver switches to the new mode during resume. However, switching to host mode in this context causes a NULL pointer dereference. The host role's start() operation registers a xhci-hcd device, but its probe is deferred while we are in the resume path. The host role's resume() operation assumes the xhci-hcd device is already probed, which is not the case, leading to the dereference. Since the start() operation of the new role is already called, the resume operation can be skipped. So skip the resume operation for the new role if a role switch occurs during resume. Once the resume sequence is complete, the xhci-hcd device can be probed in case of host mode. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000208 Mem abort info: ... Data abort info: ... [0000000000000208] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 0 UID: 0 PID: 146 Comm: sh Not tainted 6.19.0-rc7-00013-g6e64f4aabfae-dirty #135 PREEMPT Hardware name: Texas Instruments J7200 EVM (DT) pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usb_hcd_is_primary_hcd+0x0/0x1c lr : cdns_host_resume+0x24/0x5c ... Call trace: usb_hcd_is_primary_hcd+0x0/0x1c (P) cdns_resume+0x6c/0xbc cdns3_controller_resume.isra.0+0xe8/0x17c cdns3_plat_resume+0x18/0x24 platform_pm_resume+0x2c/0x68 dpm_run_callback+0x90/0x248 device_resume+0x100/0x24c dpm_resume+0x190/0x2ec dpm_resume_end+0x18/0x34 suspend_devices_and_enter+0x2b0/0xa44 pm_suspend+0x16c/0x5fc state_store+0x80/0xec kobj_attr_store+0x18/0x2c sysfs_kf_write+0x7c/0x94 kernfs_fop_write_iter+0x130/0x1dc vfs_write+0x240/0x370 ksys_write+0x70/0x108 __arm64_sys_write+0x1c/0x28 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0x108 el0t_64_sync_handler+0xa0/0xe4 el0t_64_sync+0x198/0x19c Code: 52800003 f9407ca5 d63f00a0 17ffffe4 (f9410401) ---[ end trace 0000000000000000 ]--- | |||||
| CVE-2023-2609 | 2 Fedoraproject, Vim | 2 Fedora, Vim | 2026-06-23 | N/A | 5.5 MEDIUM |
| NULL Pointer Dereference in GitHub repository vim/vim prior to 9.0.1531. | |||||
| CVE-2026-42409 | 1 F5 | 23 Big-ip Access Policy Manager, Big-ip Advanced Firewall Manager, Big-ip Advanced Web Application Firewall and 20 more | 2026-06-23 | N/A | 7.5 HIGH |
| When an HTTP/2 profile and an iRule containing the HTTP::redirect or HTTP::respond command are configured on a virtual server, undisclosed requests can cause the Traffic Management Microkernel (TMM) process to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | |||||
| CVE-2026-48985 | 2026-06-22 | N/A | 5.5 MEDIUM | ||
| pam_usb provides hardware authentication for Linux using ordinary removable media. In versions 0.9.1 and below, pusb_is_loginctl_local() can cause a NULL dereference crash when parsing loginctl output. The function calls popen() and reads the result; if the Remote field is only a newline, fgets() succeeds but strtok_r(buf, "\n", &saveptr) returns NULL. A subsequent strcmp(is_remote, "no") then dereferences NULL, causing undefined behavior (typically SIGSEGV) and crashing the PAM module. This can crash the authenticating process (e.g., sudo, login) and, depending on PAM stack configuration, deny access for all users of the affected service. This issue has been fixed in version 0.9.2. | |||||
| CVE-2026-24293 | 1 Microsoft | 9 Windows 10 21h2, Windows 10 22h2, Windows 11 23h2 and 6 more | 2026-06-19 | N/A | 7.8 HIGH |
| Null pointer dereference in Windows Ancillary Function Driver for WinSock allows an authorized attacker to elevate privileges locally. | |||||
| CVE-2026-43421 | 1 Linux | 1 Linux Kernel | 2026-06-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Fix net_device lifecycle with device_move The network device outlived its parent gadget device during disconnection, resulting in dangling sysfs links and null pointer dereference problems. A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1] was reverted due to power management ordering concerns and a NO-CARRIER regression. A subsequent attempt to defer net_device allocation to bind [2] broke 1:1 mapping between function instance and network device, making it impossible for configfs to report the resolved interface name. This results in a regression where the DHCP server fails on pmOS. Use device_move to reparent the net_device between the gadget device and /sys/devices/virtual/ across bind/unbind cycles. This preserves the network interface across USB reconnection, allowing the DHCP server to retain their binding. Introduce gether_attach_gadget()/gether_detach_gadget() helpers and use __free(detach_gadget) macro to undo attachment on bind failure. The bind_count ensures device_move executes only on the first bind. [1] https://lore.kernel.org/lkml/f2a4f9847617a0929d62025748384092e5f35cce.camel@crapouillou.net/ [2] https://lore.kernel.org/linux-usb/795ea759-7eaf-4f78-81f4-01ffbf2d7961@ixit.cz/ | |||||
| CVE-2026-31727 | 1 Linux | 1 Linux Kernel | 2026-06-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_ether: Fix NULL pointer deref in eth_get_drvinfo Commit ec35c1969650 ("usb: gadget: f_ncm: Fix net_device lifecycle with device_move") reparents the gadget device to /sys/devices/virtual during unbind, clearing the gadget pointer. If the userspace tool queries on the surviving interface during this detached window, this leads to a NULL pointer dereference. Unable to handle kernel NULL pointer dereference Call trace: eth_get_drvinfo+0x50/0x90 ethtool_get_drvinfo+0x5c/0x1f0 __dev_ethtool+0xaec/0x1fe0 dev_ethtool+0x134/0x2e0 dev_ioctl+0x338/0x560 Add a NULL check for dev->gadget in eth_get_drvinfo(). When detached, skip copying the fw_version and bus_info strings, which is natively handled by ethtool_get_drvinfo for empty strings. | |||||
| CVE-2021-47211 | 1 Linux | 1 Linux Kernel | 2026-06-19 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix null pointer dereference on pointer cs_desc The pointer cs_desc return from snd_usb_find_clock_source could be null, so there is a potential null pointer dereference issue. Fix this by adding a null check before dereference. | |||||
| CVE-2025-55663 | 1 Gpac | 1 Gpac | 2026-06-17 | N/A | 5.5 MEDIUM |
| A segmentation violation in the Track_SetStreamDescriptor function (isomedia/track.c) of GPAC MP4Box v2.4 allows attackers to cause a Denial of Service (DoS) via supplying a crafted MP4 file. | |||||
| CVE-2026-22998 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.5 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovec Commit efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length") added ttag bounds checking and data_offset validation in nvmet_tcp_handle_h2c_data_pdu(), but it did not validate whether the command's data structures (cmd->req.sg and cmd->iov) have been properly initialized before processing H2C_DATA PDUs. The nvmet_tcp_build_pdu_iovec() function dereferences these pointers without NULL checks. This can be triggered by sending H2C_DATA PDU immediately after the ICREQ/ICRESP handshake, before sending a CONNECT command or NVMe write command. Attack vectors that trigger NULL pointer dereferences: 1. H2C_DATA PDU sent before CONNECT → both pointers NULL 2. H2C_DATA PDU for READ command → cmd->req.sg allocated, cmd->iov NULL 3. H2C_DATA PDU for uninitialized command slot → both pointers NULL The fix validates both cmd->req.sg and cmd->iov before calling nvmet_tcp_build_pdu_iovec(). Both checks are required because: - Uninitialized commands: both NULL - READ commands: cmd->req.sg allocated, cmd->iov NULL - WRITE commands: both allocated | |||||
| CVE-2026-9759 | 1 Wireshark | 1 Wireshark | 2026-06-17 | N/A | 5.5 MEDIUM |
| ROHC protocol dissector crash in Wireshark 4.6.0 to 4.6.5 and 4.4.0 to 4.4.15 allows denial of service | |||||
| CVE-2026-8783 | 2026-06-17 | 4.0 MEDIUM | 4.3 MEDIUM | ||
| A security vulnerability has been detected in omec-project amf up to 2.1.3-dev. This impacts the function UERadioCapabilityCheckResponse of the file ngap/dispatcher.go. Such manipulation leads to null pointer dereference. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. Upgrading to version 2.2.0 will fix this issue. Upgrading the affected component is advised. The same pull request fixes multiple security issues. | |||||
| CVE-2026-8782 | 2026-06-17 | 4.0 MEDIUM | 4.3 MEDIUM | ||
| A weakness has been identified in omec-project amf up to 2.1.3-dev. This affects an unknown function of the file ngap/handler.go of the component NGAP Message Handler. This manipulation causes null pointer dereference. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. Upgrading to version 2.2.0 mitigates this issue. It is recommended to upgrade the affected component. The same pull request fixes multiple security issues. | |||||
| CVE-2026-8781 | 2026-06-17 | 4.0 MEDIUM | 4.3 MEDIUM | ||
| A security flaw has been discovered in omec-project amf up to 2.1.3-dev. The impacted element is the function RANConfiguration of the file ngap/handler.go. The manipulation results in null pointer dereference. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks. Upgrading to version 2.2.0 is sufficient to resolve this issue. Upgrading the affected component is recommended. The same pull request fixes multiple security issues. | |||||
| CVE-2026-8723 | 2026-06-17 | N/A | 5.3 MEDIUM | ||
| ### Summary `qs.stringify` throws `TypeError` when called with `arrayFormat: 'comma'` and `encodeValuesOnly: true` on an array containing `null` or `undefined`. The throw is synchronous and not handled by any of qs's null-related options (`skipNulls`, `strictNullHandling`). ### Details In the comma + `encodeValuesOnly` branch, `lib/stringify.js:145` mapped the array through the raw encoder before joining: ```js obj = utils.maybeMap(obj, encoder); ``` `utils.encode` (`lib/utils.js:195`) reads `str.length` with no null guard, so a `null` or `undefined` element throws `TypeError`. `skipNulls` and `strictNullHandling` are both checked in the per-element loop below this line and never get a chance to run. Same class of bug as the filter-array path fixed in 0c180a4. The vulnerable shape of the comma + `encodeValuesOnly` branch was introduced in 4c4b23d ("encode comma values more consistently", PR #463, 2023-01-19), first released in v6.11.1. #### PoC ```js const qs = require('qs'); qs.stringify({ a: [null, 'b'] }, { arrayFormat: 'comma', encodeValuesOnly: true }); qs.stringify({ a: [undefined, 'b'] }, { arrayFormat: 'comma', encodeValuesOnly: true }); qs.stringify({ a: [null] }, { arrayFormat: 'comma', encodeValuesOnly: true }); // TypeError: Cannot read properties of null (reading 'length') // at encode (lib/utils.js:195:13) // at Object.maybeMap (lib/utils.js:322:37) // at stringify (lib/stringify.js:145:25) ``` #### Fix `lib/stringify.js:145`, applied in 21f80b3 on `main` and released as v6.15.2: ```diff - obj = utils.maybeMap(obj, encoder); + obj = utils.maybeMap(obj, function (v) { + return v == null ? v : encoder(v); + }); ``` `null` and `undefined` now pass through `maybeMap` unchanged and reach the `join(',')` step as-is. For `{ a: [null, 'b'] }` this produces `a=,b`, matching the non-`encodeValuesOnly` comma path (which already joins before encoding and produces `a=%2Cb` for the same input). Single-element `[null]` arrays still collapse via the existing `obj.join(',') || null` and remain subject to `skipNulls` / `strictNullHandling` in the main loop. ### Affected versions `>=6.11.1 <6.15.2` — fixed in v6.15.2. The vulnerable code shape was introduced in 4c4b23d and first shipped in v6.11.1. Earlier versions — including all of 6.7.x, 6.8.x, 6.9.x, 6.10.x, and 6.11.0 — implemented the comma + `encodeValuesOnly` path differently (joining before encoding) and are not affected. Empirically verified across released versions. ### Impact Application code that calls `qs.stringify` with both `arrayFormat: 'comma'` and `encodeValuesOnly: true` (both non-default) on input that may contain a `null` or `undefined` array element will throw synchronously instead of producing a query string. In a typical Node.js HTTP framework (Express, Fastify, Koa, hapi) the sync throw is caught by the framework's error boundary and the affected request returns a 500; the worker process does not exit and subsequent requests are unaffected. The "kills the worker process" framing applies only to call sites outside a request-handler error boundary (background jobs, startup paths, stream pipelines) or to deployments with framework error handling explicitly disabled. The vulnerable input is a `null` or `undefined` entry inside an array; this is reachable from JSON request bodies or from application code constructing arrays from user input, but not from standard HTML form submissions (which produce strings or omitted fields, not literal `null`). | |||||
| CVE-2026-8360 | 2026-06-17 | N/A | 7.5 HIGH | ||
| Function calls to WOSCommonUtil.dll!WOSSysInfoGetDeviceInterface() in various DLLs (i.e., WOSProfileMgrModule.dll, WOSWebDavModule.dll) can return a NULL pointer (i.e., when no user is logged into the Triofox Server Agent Management Console). The returned NULL pointer is not checked before being dereferenced. | |||||
| CVE-2026-8359 | 2026-06-17 | N/A | 7.5 HIGH | ||
| When processing a request with a URL path starting with /status or /sysinfo, WOSHttpStatusModule.dll is to be loaded to handle such URL patterns. The WOSBin_LoadHttpModule function in the dll would be called to set up a "module" object for that module. However, WOSHttpStatusModule.dll is not present in the installation. As a result, a function pointer to WOSBin_LoadHttpModule (which would have been in the export table in WOSHttpStatusModule.dll) is set to NULL, resulting in calling a function at address 0. | |||||