Total
952 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-4744 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| A double-free flaw was found in the Linux kernel’s TUN/TAP device driver functionality in how a user registers the device when the register_netdevice function fails (NETDEV_REGISTER notifier). This flaw allows a local user to crash or potentially escalate their privileges on the system. | |||||
| CVE-2022-49900 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: i2c: piix4: Fix adapter not be removed in piix4_remove() In piix4_probe(), the piix4 adapter will be registered in: piix4_probe() piix4_add_adapters_sb800() / piix4_add_adapter() i2c_add_adapter() Based on the probed device type, piix4_add_adapters_sb800() or single piix4_add_adapter() will be called. For the former case, piix4_adapter_count is set as the number of adapters, while for antoher case it is not set and kept default *zero*. When piix4 is removed, piix4_remove() removes the adapters added in piix4_probe(), basing on the piix4_adapter_count value. Because the count is zero for the single adapter case, the adapter won't be removed and makes the sources allocated for adapter leaked, such as the i2c client and device. These sources can still be accessed by i2c or bus and cause problems. An easily reproduced case is that if a new adapter is registered, i2c will get the leaked adapter and try to call smbus_algorithm, which was already freed: Triggered by: rmmod i2c_piix4 && modprobe max31730 BUG: unable to handle page fault for address: ffffffffc053d860 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 3752 Comm: modprobe Tainted: G Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:i2c_default_probe (drivers/i2c/i2c-core-base.c:2259) i2c_core RSP: 0018:ffff888107477710 EFLAGS: 00000246 ... <TASK> i2c_detect (drivers/i2c/i2c-core-base.c:2302) i2c_core __process_new_driver (drivers/i2c/i2c-core-base.c:1336) i2c_core bus_for_each_dev (drivers/base/bus.c:301) i2c_for_each_dev (drivers/i2c/i2c-core-base.c:1823) i2c_core i2c_register_driver (drivers/i2c/i2c-core-base.c:1861) i2c_core do_one_initcall (init/main.c:1296) do_init_module (kernel/module/main.c:2455) ... </TASK> ---[ end trace 0000000000000000 ]--- Fix this problem by correctly set piix4_adapter_count as 1 for the single adapter so it can be normally removed. | |||||
| CVE-2022-49686 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: fix list double add in uvcg_video_pump A panic can occur if the endpoint becomes disabled and the uvcg_video_pump adds the request back to the req_free list after it has already been queued to the endpoint. The endpoint complete will add the request back to the req_free list. Invalidate the local request handle once it's been queued. <6>[ 246.796704][T13726] configfs-gadget gadget: uvc: uvc_function_set_alt(1, 0) <3>[ 246.797078][ T26] list_add double add: new=ffffff878bee5c40, prev=ffffff878bee5c40, next=ffffff878b0f0a90. <6>[ 246.797213][ T26] ------------[ cut here ]------------ <2>[ 246.797224][ T26] kernel BUG at lib/list_debug.c:31! <6>[ 246.807073][ T26] Call trace: <6>[ 246.807180][ T26] uvcg_video_pump+0x364/0x38c <6>[ 246.807366][ T26] process_one_work+0x2a4/0x544 <6>[ 246.807394][ T26] worker_thread+0x350/0x784 <6>[ 246.807442][ T26] kthread+0x2ac/0x320 | |||||
| CVE-2022-49541 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: cifs: fix potential double free during failed mount RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=2088799 | |||||
| CVE-2022-49530 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: fix double free in si_parse_power_table() In function si_parse_power_table(), array adev->pm.dpm.ps and its member is allocated. If the allocation of each member fails, the array itself is freed and returned with an error code. However, the array is later freed again in si_dpm_fini() function which is called when the function returns an error. This leads to potential double free of the array adev->pm.dpm.ps, as well as leak of its array members, since the members are not freed in the allocation function and the array is not nulled when freed. In addition adev->pm.dpm.num_ps, which keeps track of the allocated array member, is not updated until the member allocation is successfully finished, this could also lead to either use after free, or uninitialized variable access in si_dpm_fini(). Fix this by postponing the free of the array until si_dpm_fini() and increment adev->pm.dpm.num_ps everytime the array member is allocated. | |||||
| CVE-2022-49508 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: HID: elan: Fix potential double free in elan_input_configured 'input' is a managed resource allocated with devm_input_allocate_device(), so there is no need to call input_free_device() explicitly or there will be a double free. According to the doc of devm_input_allocate_device(): * Managed input devices do not need to be explicitly unregistered or * freed as it will be done automatically when owner device unbinds from * its driver (or binding fails). | |||||
| CVE-2022-49455 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: misc: ocxl: fix possible double free in ocxl_file_register_afu info_release() will be called in device_unregister() when info->dev's reference count is 0. So there is no need to call ocxl_afu_put() and kfree() again. Fix this by adding free_minor() and return to err_unregister error path. | |||||
| CVE-2022-49410 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix potential double free in create_var_ref() In create_var_ref(), init_var_ref() is called to initialize the fields of variable ref_field, which is allocated in the previous function call to create_hist_field(). Function init_var_ref() allocates the corresponding fields such as ref_field->system, but frees these fields when the function encounters an error. The caller later calls destroy_hist_field() to conduct error handling, which frees the fields and the variable itself. This results in double free of the fields which are already freed in the previous function. Fix this by storing NULL to the corresponding fields when they are freed in init_var_ref(). | |||||
| CVE-2022-49391 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: mtk_scp: Fix a potential double free 'scp->rproc' is allocated using devm_rproc_alloc(), so there is no need to free it explicitly in the remove function. | |||||
| CVE-2022-49384 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: md: fix double free of io_acct_set bioset Now io_acct_set is alloc and free in personality. Remove the codes that free io_acct_set in md_free and md_stop. | |||||
| CVE-2022-49290 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mac80211: fix potential double free on mesh join While commit 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh") fixed a memory leak on mesh leave / teardown it introduced a potential memory corruption caused by a double free when rejoining the mesh: ieee80211_leave_mesh() -> kfree(sdata->u.mesh.ie); ... ieee80211_join_mesh() -> copy_mesh_setup() -> old_ie = ifmsh->ie; -> kfree(old_ie); This double free / kernel panics can be reproduced by using wpa_supplicant with an encrypted mesh (if set up without encryption via "iw" then ifmsh->ie is always NULL, which avoids this issue). And then calling: $ iw dev mesh0 mesh leave $ iw dev mesh0 mesh join my-mesh Note that typically these commands are not used / working when using wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids the memory corruption, too. The issue was first observed in an application which was not using wpa_supplicant but "Senf" instead, which implements its own calls to nl80211. Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh join function and leaving it solely up to the mesh leave to free the mesh IE. | |||||
| CVE-2022-49205 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix double uncharge the mem of sk_msg If tcp_bpf_sendmsg is running during a tear down operation, psock may be freed. tcp_bpf_sendmsg() tcp_bpf_send_verdict() sk_msg_return() tcp_bpf_sendmsg_redir() unlikely(!psock)) sk_msg_free() The mem of msg has been uncharged in tcp_bpf_send_verdict() by sk_msg_return(), and would be uncharged by sk_msg_free() again. When psock is null, we can simply returning an error code, this would then trigger the sk_msg_free_nocharge in the error path of __SK_REDIRECT and would have the side effect of throwing an error up to user space. This would be a slight change in behavior from user side but would look the same as an error if the redirect on the socket threw an error. This issue can cause the following info: WARNING: CPU: 0 PID: 2136 at net/ipv4/af_inet.c:155 inet_sock_destruct+0x13c/0x260 Call Trace: <TASK> __sk_destruct+0x24/0x1f0 sk_psock_destroy+0x19b/0x1c0 process_one_work+0x1b3/0x3c0 worker_thread+0x30/0x350 ? process_one_work+0x3c0/0x3c0 kthread+0xe6/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 </TASK> | |||||
| CVE-2022-48740 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: selinux: fix double free of cond_list on error paths On error path from cond_read_list() and duplicate_policydb_cond_list() the cond_list_destroy() gets called a second time in caller functions, resulting in NULL pointer deref. Fix this by resetting the cond_list_len to 0 in cond_list_destroy(), making subsequent calls a noop. Also consistently reset the cond_list pointer to NULL after freeing. [PM: fix line lengths in the description] | |||||
| CVE-2022-48649 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: mm/slab_common: fix possible double free of kmem_cache When doing slub_debug test, kfence's 'test_memcache_typesafe_by_rcu' kunit test case cause a use-after-free error: BUG: KASAN: use-after-free in kobject_del+0x14/0x30 Read of size 8 at addr ffff888007679090 by task kunit_try_catch/261 CPU: 1 PID: 261 Comm: kunit_try_catch Tainted: G B N 6.0.0-rc5-next-20220916 #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x48 print_address_description.constprop.0+0x87/0x2a5 print_report+0x103/0x1ed kasan_report+0xb7/0x140 kobject_del+0x14/0x30 kmem_cache_destroy+0x130/0x170 test_exit+0x1a/0x30 kunit_try_run_case+0xad/0xc0 kunit_generic_run_threadfn_adapter+0x26/0x50 kthread+0x17b/0x1b0 </TASK> The cause is inside kmem_cache_destroy(): kmem_cache_destroy acquire lock/mutex shutdown_cache schedule_work(kmem_cache_release) (if RCU flag set) release lock/mutex kmem_cache_release (if RCU flag not set) In some certain timing, the scheduled work could be run before the next RCU flag checking, which can then get a wrong value and lead to double kmem_cache_release(). Fix it by caching the RCU flag inside protected area, just like 'refcnt' | |||||
| CVE-2022-47975 | 1 Huawei | 2 Emui, Harmonyos | 2026-06-17 | N/A | 7.5 HIGH |
| The DUBAI module has a double free vulnerability. Successful exploitation of this vulnerability may affect system availability. | |||||
| CVE-2022-44640 | 2 Heimdal Project, Samba | 2 Heimdal, Samba | 2026-06-17 | N/A | 9.8 CRITICAL |
| Heimdal before 7.7.1 allows remote attackers to execute arbitrary code because of an invalid free in the ASN.1 codec used by the Key Distribution Center (KDC). | |||||
| CVE-2022-43454 | 1 Apple | 5 Ipados, Iphone Os, Macos and 2 more | 2026-06-17 | N/A | 7.8 HIGH |
| A double free issue was addressed with improved memory management. This issue is fixed in macOS Ventura 13.1, watchOS 9.2, iOS 16.2 and iPadOS 16.2, tvOS 16.2. An app may be able to execute arbitrary code with kernel privileges. | |||||
| CVE-2022-40683 | 1 Fortinet | 1 Fortiweb | 2026-06-17 | N/A | 7.8 HIGH |
| A double free in Fortinet FortiWeb version 7.0.0 through 7.0.3 may allows attacker to execute unauthorized code or commands via specially crafted commands | |||||
| CVE-2022-40522 | 1 Qualcomm | 108 Csr8811, Csr8811 Firmware, Ipq6000 and 105 more | 2026-06-17 | N/A | 8.4 HIGH |
| Memory corruption in Linux Networking due to double free while handling a hyp-assign. | |||||
| CVE-2022-40515 | 1 Qualcomm | 318 Apq8009, Apq8009 Firmware, Apq8009w and 315 more | 2026-06-17 | N/A | 7.3 HIGH |
| Memory corruption in Video due to double free while playing 3gp clip with invalid metadata atoms. | |||||