Total
184 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-63452 | 1 Oisf | 1 Suricata | 2026-09-28 | N/A | 7.5 HIGH |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. From 8.0.0 until 8.0.6, the HTTP/1 parser limits decompression work per transaction but does not limit how many small brotli compression bombs a single flow can submit. With response-body-decompress-layer-limit enabled, repeated compressed responses make the decompression paths in rust/htp perform expensive work for every transaction, degrading packet processing and potentially causing loss of monitoring visibility or denial of service. This issue is fixed in version 8.0.6. | |||||
| CVE-2025-66471 | 1 Python | 1 Urllib3 | 2026-09-25 | N/A | 7.5 HIGH |
| urllib3 is a user-friendly HTTP client library for Python. Starting in version 1.0 and prior to 2.6.0, the Streaming API improperly handles highly compressed data. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. When streaming a compressed response, urllib3 can perform decoding or decompression based on the HTTP Content-Encoding header (e.g., gzip, deflate, br, or zstd). The library must read compressed data from the network and decompress it until the requested chunk size is met. Any resulting decompressed data that exceeds the requested amount is held in an internal buffer for the next read operation. The decompression logic could cause urllib3 to fully decode a small amount of highly compressed data in a single operation. This can result in excessive resource consumption (high CPU usage and massive memory allocation for the decompressed data. | |||||
| CVE-2026-77528 | 2026-09-24 | N/A | 5.3 MEDIUM | ||
| Autobahn Python is a WebSocket and WAMP implementation for Python that supports Twisted and asyncio. Prior to 26.7.1, WebSocket endpoints that accept permessage-deflate and rely on maxMessagePayloadSize enforce that limit against the compressed frame length before inflation but do not recheck the decompressed message size before delivery. A remote unauthenticated client can send a valid compressed frame below the configured wire-size limit that expands beyond the application message limit, causing oversized data to be allocated, joined, validated, and passed to application callbacks. This can create resource-exhaustion pressure, but the advisory does not establish confidentiality or integrity impact. This issue is fixed in version 26.7.1. | |||||
| CVE-2026-77620 | 2026-09-24 | N/A | N/A | ||
| Vector is a high-performance observability data pipeline. From 0.15.0 until 0.57.0, the logstash source feeds each decompressed frame back into its decoder without limiting nested compression depth. An unauthenticated remote peer that can reach the default 0.0.0.0:5044 listener can send many nested compressed frames, causing recursive decoding that exhausts the worker thread stack and aborts the process. The same nested construction amplifies decompressed input, and process termination can halt log ingestion for every tenant on a shared pipeline. This issue is fixed in version 0.57.0. | |||||
| CVE-2026-48594 | 1 Elixir-tesla | 1 Tesla | 2026-09-24 | N/A | 7.5 HIGH |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in elixir-tesla tesla allows a denial of service via decompression bomb in HTTP response bodies. When Tesla.Middleware.DecompressResponse or Tesla.Middleware.Compression is included in a Tesla middleware pipeline, HTTP response bodies are decompressed eagerly with no size limit. The decompress_body/2 function in lib/tesla/middleware/compression.ex passes the entire response body to :zlib.gunzip/1 or :zlib.unzip/1 without any cap on the output size. Additionally, compression_algorithms/1 splits the content-encoding header on commas and decompress_body/2 recurses once per token, applying a decompression pass on each iteration. A server advertising content-encoding: gzip, gzip, gzip, gzip causes four recursive decompression passes, yielding exponential amplification: each gzip layer can expand its input roughly 1000x, so a payload of a few hundred bytes on the wire inflates to gigabytes of BEAM heap, exhausting memory and crashing or freezing the calling process. This issue affects tesla: from 0.6.0 before 1.18.3. | |||||
| CVE-2026-92000 | 2026-09-24 | N/A | 7.5 HIGH | ||
| adm-zip versions 0.5.14 through 0.6.0 fail to apply zlib decompression output limits when ZIP entries declare zero uncompressed size. Attackers can craft malicious ZIP archives with highly compressible entries declaring zero size to exhaust memory and cause denial of service. | |||||
| CVE-2026-80189 | 2026-09-24 | N/A | 6.5 MEDIUM | ||
| LeafWiki extracts an uploaded ZIP archive without limiting how much data it will write. ZipExtractor.ExtractToDir in internal/importer/zip_extractor.go opens each entry and copies it to the destination with io.Copy, which runs to the end of the decompressed stream, so only the size of the uploaded archive is bounded and the size it expands to is not. The import route that reaches this code requires the Editor or Admin role, and the upload itself is capped at 500 MiB compressed. Because a ZIP entry can compress at a very high ratio, an archive well inside that cap can expand to hundreds of gigabytes as it is written out. The extraction directory defaults to a location under the operating system temporary directory, so the written data consumes the disk backing that path, which on a tmpfs-backed temporary directory is memory. A user holding the Editor role can therefore exhaust the storage the service depends on and keep it from serving, using far more resource than the upload limit alone would permit. | |||||
| CVE-2026-82520 | 2026-09-24 | N/A | 7.5 HIGH | ||
| parsedmarc before 11.0.1 decompresses gzip and ZIP attachments in a single unbounded read with no limit on decompressed output size. Because parsedmarc automatically processes incoming DMARC report emails without user interaction, an unauthenticated remote attacker can send a crafted email with a highly compressed attachment to the monitored mailbox, causing the parsedmarc process to allocate memory proportional to the uncompressed size and exhaust available RAM. | |||||
| CVE-2026-65827 | 2026-09-24 | N/A | 6.5 MEDIUM | ||
| Docmost is open-source collaborative wiki and documentation software. From 0.21.0 until 0.95.0, any authenticated workspace member with edit rights to a space can upload an archive to the page-import feature whose ZIP extraction routine does not limit total uncompressed size, per-entry size, or entry count. The extractor writes entries to the server temp directory and automatically extracts one nested ZIP, allowing an outer upload within the default 200 MB limit to expand by multiple GB. The resulting disk exhaustion can crash the import worker and degrade or take down the instance for all tenants. This issue is fixed in version 0.95.0. | |||||
| CVE-2026-15709 | 2026-09-24 | N/A | 7.5 HIGH | ||
| A flaw was found in libsoup's WebSocket implementation when using the permessage-deflate extension. The extension's decompression loop (inflate()) processes data in chunks without enforcing an upper boundary limit on the output buffer size. While libsoup limits the incoming compressed frame size via max_incoming_payload_size, it fails to track or limit memory allocation during decompression. A separate check for decompressed size (max_total_message_size) exists but executes only after inflation is complete, and it is entirely disabled by default for client connections. A remote, unauthenticated attacker can exploit this by sending a small, highly compressed payload (a decompression bomb), causing unbounded memory allocation that triggers an Out-of-Memory (OOM) crash and a Denial of Service (DoS). | |||||
| CVE-2026-83599 | 2026-09-23 | N/A | 7.5 HIGH | ||
| Netdata is an open source observability tool. Prior to 2.11.0, Netdata's unauthenticated WebSocket server negotiates permessage-deflate before authentication, and src/web/websocket/websocket-compression.c allows websocket_client_decompress_message() to grow decompressed output toward WS_MAX_DECOMPRESSED_SIZE without enforcing a compressed-to-decompressed ratio. Small highly compressed frames can therefore cause large server-side allocations, and repeated concurrent connections can exhaust memory and terminate monitoring. This vulnerability is fixed in 2.11.0. | |||||
| CVE-2026-77021 | 2026-09-21 | N/A | N/A | ||
| Improper handling of highly compressed data (data amplification) in Checkmk <2.5.0p14, <2.4.0p37, <2.3.0p51 and 2.2.0 (EOL) allows an attacker who controls a host registered for push mode to exhaust the memory of the agent receiver by sending a small zlib compressed payload that decompresses to an arbitrary size. | |||||
| CVE-2026-47321 | 2026-09-21 | N/A | 7.5 HIGH | ||
| The CompressionFilter class uses ZLib to deflate and inflate data sent and received. When we inflate incoming data, the filter does not control the resulting size, and create a buffer no matter what. Some compressed data may have a compression ration greater than 1 thousand, leading to an exhaustion of the application memory, as we don't control the deflated size. The fix adds such a control by allowing the application developer to provide a fixed size limit, which when reached throws an exception. It also allows the user to provide a compression ratio that should not be exceeded, protected the application from small inflated files that inflate in gigantic files, but with a grace limit for the resulting size (1Mb) to avoid false positive (like a very small file inflating with a high ratio, but resulting with a acceptable size, like a few thousands bytes) For application using this feature, it is highly recommended to create the CompressionFilter and to pass the maximum limit as a forth constructor parameter, maxDecompressedSize: public CompressionFilter(final boolean compressInbound, final boolean compressOutbound, final int compressionLevel, final int maxDecompressedSize)Optionally one can also provide a maxDecompressRatio fifth parameter, and a decompressRatioMinSize sixth parameter to allow small inflated files with a high compression ratio to still be accepted. Here are the additional constructor: public CompressionFilter(final boolean compressInbound, final boolean compressOutbound, final int compressionLevel, final int maxDecompressedSize, final long maxDecompressRatio, final long decompressRatioMinSize) Also note that a fluent API has been added to spare the users the pain to call a constructor with that many parameters: CompressionFilter compressionFilter = new CompressionFilter() .setCompressionLevel(Zlib.COMPRESSION_MAX) .setMaxDecompressedSize(1_000_000) .setMaxDecompressRatio(100). .setDecompressRatioMinSize(100_000); Applications using Apache MINA are advised to upgrade and configure their CompressionFilter instance. | |||||
| CVE-2026-70469 | 1 Apache | 1 Nifi | 2026-09-21 | N/A | 7.5 HIGH |
| Apache NiFi 2.11.0 disabled support for gzip-encoded HTTP requests for the application REST API and rejected requests that included the standard Content-Encoding header indicating gzip encoding. The framework enforcement filter did not check multiple instances of the Content-Encoding header and did not reject non-standard identifiers for gzip encoding, allowing a malicious client to send crafted requests that could consume excessive amounts of memory. Upgrading to Apache NiFi 2.12.0 is the recommended mitigation, which disables decompression of gzip-encoded HTTP requests regardless of header number or encoding identifiers. | |||||
| CVE-2026-73232 | 2026-09-18 | N/A | 7.5 HIGH | ||
| ffuf is a fast web fuzzer written in Go. Prior to 2.2.0, ffuf allows a malicious target server to cause an out-of-memory denial of service because the response size guard in pkg/runner/simple.go checks only the compressed Content-Length while io.ReadAll reads gzip, brotli, deflate, transparently decompressed, or chunked response bodies without a decompressed-size bound. This issue is fixed in version 2.2.0. | |||||
| CVE-2026-84384 | 2026-09-18 | N/A | 7.5 HIGH | ||
| libheif is a HEIF and AVIF file format decoder and encoder. From 1.19.0 until 1.23.2, crafted HEIF or AVIF mime metadata and unci image data can cause decompress_brotli() and do_inflate() to grow accumulated output without an effective size limit or MemoryHandle accounting. The brotli path has no output bound, while the zlib path checks only a small temporary buffer in a branch that valid streams do not reach, and overlapping icef units can decompress the same payload repeatedly. HeifContext::interpret_heif_file_images() processes multiple compressed metadata items during file opening, allowing a small file to consume unbounded memory and terminate the process. This issue is fixed in version 1.23.2. | |||||
| CVE-2026-89321 | 2026-09-16 | N/A | 4.3 MEDIUM | ||
| Publishing limits the compressed size of a VSIX (ovsx.publishing.max-content-size, 512 MB by default) but nothing limited how large an entry becomes when opened. On the first request to /vscode/unpkg/{namespace}/{extension}/{version}/{path}, WebResourceService opened the entry with ZipFile.getInputStream() and passed the decompressed stream to Files.copy(), which ran to the end of the stream without counting bytes written. The result was cached under java.io.tmpdir, and that cache evicted by entry count (150), not by size, so it placed no bound on disk usage. A publisher with access only to their own namespace could therefore upload a small, highly compressible VSIX and cause the server to write far larger files to the temp filesystem — repeating with different files or versions, since a repeat request is served from the cache. Impact observed: the temp filesystem filled; requests for files not already cached returned 500 with No space left on device; a failed extraction left a partial cache file that blocked later attempts at that path; publishing failed with Failed to read extension file. Metadata and already-cached files kept working, and the server did not stop. Triggering the extraction needs no authentication — only the upload does. | |||||
| CVE-2026-90555 | 1 Vllm | 1 Vllm | 2026-09-16 | N/A | 6.5 MEDIUM |
| vLLM versions before 0.28.0 fail to validate audio sample rate headers in the transcription endpoint, allowing authenticated clients to bypass duration checks. Attackers can submit forged FLAC headers with inflated sample rates to trigger excessive memory allocation and crash the API server process affecting all tenants. | |||||
| CVE-2026-75047 | 1 Jetbrains | 1 Youtrack | 2026-09-15 | N/A | 6.5 MEDIUM |
| In JetBrains YouTrack before 2026.2.18177 doS attack was possible via a decompression bomb in the import endpoint | |||||
| CVE-2026-21441 | 1 Python | 1 Urllib3 | 2026-09-15 | N/A | 7.5 HIGH |
| urllib3 is an HTTP client library for Python. urllib3's streaming API is designed for the efficient handling of large HTTP responses by reading the content in chunks, rather than loading the entire response body into memory at once. urllib3 can perform decoding or decompression based on the HTTP `Content-Encoding` header (e.g., `gzip`, `deflate`, `br`, or `zstd`). When using the streaming API, the library decompresses only the necessary bytes, enabling partial content consumption. Starting in version 1.22 and prior to version 2.6.3, for HTTP redirect responses, the library would read the entire response body to drain the connection and decompress the content unnecessarily. This decompression occurred even before any read methods were called, and configured read limits did not restrict the amount of decompressed data. As a result, there was no safeguard against decompression bombs. A malicious server could exploit this to trigger excessive resource consumption on the client. Applications and libraries are affected when they stream content from untrusted sources by setting `preload_content=False` when they do not disable redirects. Users should upgrade to at least urllib3 v2.6.3, in which the library does not decode content of redirect responses when `preload_content=False`. If upgrading is not immediately possible, disable redirects by setting `redirect=False` for requests to untrusted source. | |||||