Total
2676 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-45300 | 1 Alf | 1 Alf | 2026-06-17 | N/A | 7.5 HIGH |
| alf.io is an open source ticket reservation system for conferences, trade shows, workshops, and meetups. Prior to version 2.0-M5, a race condition allows the user to bypass the limit on the number of promo codes and use the discount coupon multiple times. In "alf.io", an event organizer can apply price discounts by using promo codes to your events. The organizer can limit the number of promo codes that will be used for this, but the time-gap between checking the number of codes and restricting the use of the codes allows a threat actor to bypass the promo code limit. Version 2.0-M5 fixes this issue. | |||||
| CVE-2024-43866 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Always drain health in shutdown callback There is no point in recovery during device shutdown. if health work started need to wait for it to avoid races and NULL pointer access. Hence, drain health WQ on shutdown callback. | |||||
| CVE-2024-43701 | 2026-06-17 | N/A | 7.8 HIGH | ||
| Software installed and run as a non-privileged user may conduct GPU system calls to read and write freed physical memory from the GPU. | |||||
| CVE-2024-42488 | 1 Cilium | 1 Cilium | 2026-06-17 | N/A | 6.8 MEDIUM |
| Cilium is a networking, observability, and security solution with an eBPF-based dataplane. Prior to versions 1.14.14 and 1.15.8, a race condition in the Cilium agent can cause the agent to ignore labels that should be applied to a node. This could in turn cause CiliumClusterwideNetworkPolicies intended for nodes with the ignored label to not apply, leading to policy bypass. This issue has been patched in Cilium v1.14.14 and v1.15.8 As the underlying issue depends on a race condition, users unable to upgrade can restart the Cilium agent on affected nodes until the affected policies are confirmed to be working as expected. | |||||
| CVE-2024-41005 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netpoll: Fix race condition in netpoll_owner_active KCSAN detected a race condition in netpoll: BUG: KCSAN: data-race in net_rx_action / netpoll_send_skb write (marked) to 0xffff8881164168b0 of 4 bytes by interrupt on cpu 10: net_rx_action (./include/linux/netpoll.h:90 net/core/dev.c:6712 net/core/dev.c:6822) <snip> read to 0xffff8881164168b0 of 4 bytes by task 1 on cpu 2: netpoll_send_skb (net/core/netpoll.c:319 net/core/netpoll.c:345 net/core/netpoll.c:393) netpoll_send_udp (net/core/netpoll.c:?) <snip> value changed: 0x0000000a -> 0xffffffff This happens because netpoll_owner_active() needs to check if the current CPU is the owner of the lock, touching napi->poll_owner non atomically. The ->poll_owner field contains the current CPU holding the lock. Use an atomic read to check if the poll owner is the current CPU. | |||||
| CVE-2024-40976 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/lima: mask irqs in timeout path before hard reset There is a race condition in which a rendering job might take just long enough to trigger the drm sched job timeout handler but also still complete before the hard reset is done by the timeout handler. This runs into race conditions not expected by the timeout handler. In some very specific cases it currently may result in a refcount imbalance on lima_pm_idle, with a stack dump such as: [10136.669170] WARNING: CPU: 0 PID: 0 at drivers/gpu/drm/lima/lima_devfreq.c:205 lima_devfreq_record_idle+0xa0/0xb0 ... [10136.669459] pc : lima_devfreq_record_idle+0xa0/0xb0 ... [10136.669628] Call trace: [10136.669634] lima_devfreq_record_idle+0xa0/0xb0 [10136.669646] lima_sched_pipe_task_done+0x5c/0xb0 [10136.669656] lima_gp_irq_handler+0xa8/0x120 [10136.669666] __handle_irq_event_percpu+0x48/0x160 [10136.669679] handle_irq_event+0x4c/0xc0 We can prevent that race condition entirely by masking the irqs at the beginning of the timeout handler, at which point we give up on waiting for that job entirely. The irqs will be enabled again at the next hard reset which is already done as a recovery by the timeout handler. | |||||
| CVE-2024-40887 | 2026-06-17 | N/A | 6.1 MEDIUM | ||
| Race condition in some Intel(R) PROSet/Wireless WiFi and Killerâ„¢ WiFi software for Windows before version 23.80 may allow an unauthenticated user to potentially enable denial of service via adjacent access. | |||||
| CVE-2024-40815 | 1 Apple | 5 Ipados, Iphone Os, Macos and 2 more | 2026-06-17 | N/A | 7.5 HIGH |
| A race condition was addressed with additional validation. This issue is fixed in iOS 17.6 and iPadOS 17.6, macOS Sonoma 14.6, macOS Ventura 13.6.8, tvOS 17.6, watchOS 10.6. A malicious attacker with arbitrary read and write capability may be able to bypass Pointer Authentication. | |||||
| CVE-2024-3979 | 2026-06-17 | 3.2 LOW | 4.4 MEDIUM | ||
| A vulnerability, which was classified as problematic, has been found in COVESA vsomeip up to 3.4.10. Affected by this issue is some unknown functionality. The manipulation leads to race condition. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-261596. | |||||
| CVE-2024-39554 | 1 Juniper | 2 Junos, Junos Os Evolved | 2026-06-17 | N/A | 5.9 MEDIUM |
| A Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to inject incremental routing updates when BGP multipath is enabled, causing rpd to crash and restart, resulting in a Denial of Service (DoS). Since this is a timing issue (race condition), the successful exploitation of this vulnerability is outside the attacker's control. However, continued receipt and processing of this packet may create a sustained Denial of Service (DoS) condition. On all Junos OS and Junos OS Evolved platforms with BGP multipath enabled, a specific multipath calculation removes the original next hop from the multipath lead routes nexthop-set. When this change happens, multipath relies on certain internal timing to record the update. Under certain circumstance and with specific timing, this could result in an rpd crash. This issue only affects systems with BGP multipath enabled. This issue affects: Junos OS: * All versions of 21.1 * from 21.2 before 21.2R3-S7, * from 21.4 before 21.4R3-S6, * from 22.1 before 22.1R3-S5, * from 22.2 before 22.2R3-S3, * from 22.3 before 22.3R3-S2, * from 22.4 before 22.4R3, * from 23.2 before 23.2R2. Junos OS Evolved: * All versions of 21.1-EVO, * All versions of 21.2-EVO, * from 21.4-EVO before 21.4R3-S6-EVO, * from 22.1-EVO before 22.1R3-S5-EVO, * from 22.2-EVO before 22.2R3-S3-EVO, * from 22.3-EVO before 22.3R3-S2-EVO, * from 22.4-EVO before 22.4R3-EVO, * from 23.2-EVO before 23.2R2-EVO. Versions of Junos OS before 21.1R1 are unaffected by this vulnerability. Versions of Junos OS Evolved before 21.1R1-EVO are unaffected by this vulnerability. | |||||
| CVE-2024-39296 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bonding: fix oops during rmmod "rmmod bonding" causes an oops ever since commit cc317ea3d927 ("bonding: remove redundant NULL check in debugfs function"). Here are the relevant functions being called: bonding_exit() bond_destroy_debugfs() debugfs_remove_recursive(bonding_debug_root); bonding_debug_root = NULL; <--------- SET TO NULL HERE bond_netlink_fini() rtnl_link_unregister() __rtnl_link_unregister() unregister_netdevice_many_notify() bond_uninit() bond_debug_unregister() (commit removed check for bonding_debug_root == NULL) debugfs_remove() simple_recursive_removal() down_write() -> OOPS However, reverting the bad commit does not solve the problem completely because the original code contains a race that could cause the same oops, although it was much less likely to be triggered unintentionally: CPU1 rmmod bonding bonding_exit() bond_destroy_debugfs() debugfs_remove_recursive(bonding_debug_root); CPU2 echo -bond0 > /sys/class/net/bonding_masters bond_uninit() bond_debug_unregister() if (!bonding_debug_root) CPU1 bonding_debug_root = NULL; So do NOT revert the bad commit (since the removed checks were racy anyway), and instead change the order of actions taken during module removal. The same oops can also happen if there is an error during module init, so apply the same fix there. | |||||
| CVE-2024-38613 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: m68k: Fix spinlock race in kernel thread creation Context switching does take care to retain the correct lock owner across the switch from 'prev' to 'next' tasks. This does rely on interrupts remaining disabled for the entire duration of the switch. This condition is guaranteed for normal process creation and context switching between already running processes, because both 'prev' and 'next' already have interrupts disabled in their saved copies of the status register. The situation is different for newly created kernel threads. The status register is set to PS_S in copy_thread(), which does leave the IPL at 0. Upon restoring the 'next' thread's status register in switch_to() aka resume(), interrupts then become enabled prematurely. resume() then returns via ret_from_kernel_thread() and schedule_tail() where run queue lock is released (see finish_task_switch() and finish_lock_switch()). A timer interrupt calling scheduler_tick() before the lock is released in finish_task_switch() will find the lock already taken, with the current task as lock owner. This causes a spinlock recursion warning as reported by Guenter Roeck. As far as I can ascertain, this race has been opened in commit 533e6903bea0 ("m68k: split ret_from_fork(), simplify kernel_thread()") but I haven't done a detailed study of kernel history so it may well predate that commit. Interrupts cannot be disabled in the saved status register copy for kernel threads (init will complain about interrupts disabled when finally starting user space). Disable interrupts temporarily when switching the tasks' register sets in resume(). Note that a simple oriw 0x700,%sr after restoring sr is not enough here - this leaves enough of a race for the 'spinlock recursion' warning to still be observed. Tested on ARAnyM and qemu (Quadra 800 emulation). | |||||
| CVE-2024-38601 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix a race between readers and resize checks The reader code in rb_get_reader_page() swaps a new reader page into the ring buffer by doing cmpxchg on old->list.prev->next to point it to the new page. Following that, if the operation is successful, old->list.next->prev gets updated too. This means the underlying doubly-linked list is temporarily inconsistent, page->prev->next or page->next->prev might not be equal back to page for some page in the ring buffer. The resize operation in ring_buffer_resize() can be invoked in parallel. It calls rb_check_pages() which can detect the described inconsistency and stop further tracing: [ 190.271762] ------------[ cut here ]------------ [ 190.271771] WARNING: CPU: 1 PID: 6186 at kernel/trace/ring_buffer.c:1467 rb_check_pages.isra.0+0x6a/0xa0 [ 190.271789] Modules linked in: [...] [ 190.271991] Unloaded tainted modules: intel_uncore_frequency(E):1 skx_edac(E):1 [ 190.272002] CPU: 1 PID: 6186 Comm: cmd.sh Kdump: loaded Tainted: G E 6.9.0-rc6-default #5 158d3e1e6d0b091c34c3b96bfd99a1c58306d79f [ 190.272011] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552c-rebuilt.opensuse.org 04/01/2014 [ 190.272015] RIP: 0010:rb_check_pages.isra.0+0x6a/0xa0 [ 190.272023] Code: [...] [ 190.272028] RSP: 0018:ffff9c37463abb70 EFLAGS: 00010206 [ 190.272034] RAX: ffff8eba04b6cb80 RBX: 0000000000000007 RCX: ffff8eba01f13d80 [ 190.272038] RDX: ffff8eba01f130c0 RSI: ffff8eba04b6cd00 RDI: ffff8eba0004c700 [ 190.272042] RBP: ffff8eba0004c700 R08: 0000000000010002 R09: 0000000000000000 [ 190.272045] R10: 00000000ffff7f52 R11: ffff8eba7f600000 R12: ffff8eba0004c720 [ 190.272049] R13: ffff8eba00223a00 R14: 0000000000000008 R15: ffff8eba067a8000 [ 190.272053] FS: 00007f1bd64752c0(0000) GS:ffff8eba7f680000(0000) knlGS:0000000000000000 [ 190.272057] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 190.272061] CR2: 00007f1bd6662590 CR3: 000000010291e001 CR4: 0000000000370ef0 [ 190.272070] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 190.272073] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 190.272077] Call Trace: [ 190.272098] <TASK> [ 190.272189] ring_buffer_resize+0x2ab/0x460 [ 190.272199] __tracing_resize_ring_buffer.part.0+0x23/0xa0 [ 190.272206] tracing_resize_ring_buffer+0x65/0x90 [ 190.272216] tracing_entries_write+0x74/0xc0 [ 190.272225] vfs_write+0xf5/0x420 [ 190.272248] ksys_write+0x67/0xe0 [ 190.272256] do_syscall_64+0x82/0x170 [ 190.272363] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 190.272373] RIP: 0033:0x7f1bd657d263 [ 190.272381] Code: [...] [ 190.272385] RSP: 002b:00007ffe72b643f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 190.272391] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f1bd657d263 [ 190.272395] RDX: 0000000000000002 RSI: 0000555a6eb538e0 RDI: 0000000000000001 [ 190.272398] RBP: 0000555a6eb538e0 R08: 000000000000000a R09: 0000000000000000 [ 190.272401] R10: 0000555a6eb55190 R11: 0000000000000246 R12: 00007f1bd6662500 [ 190.272404] R13: 0000000000000002 R14: 00007f1bd6667c00 R15: 0000000000000002 [ 190.272412] </TASK> [ 190.272414] ---[ end trace 0000000000000000 ]--- Note that ring_buffer_resize() calls rb_check_pages() only if the parent trace_buffer has recording disabled. Recent commit d78ab792705c ("tracing: Stop current tracer when resizing buffer") causes that it is now always the case which makes it more likely to experience this issue. The window to hit this race is nonetheless very small. To help reproducing it, one can add a delay loop in rb_get_reader_page(): ret = rb_head_page_replace(reader, cpu_buffer->reader_page); if (!ret) goto spin; for (unsigned i = 0; i < 1U << 26; i++) /* inserted delay loop */ __asm__ __volatile__ ("" : : : "memory"); rb_list_head(reader->list.next)->prev = &cpu_buffer->reader_page->list; .. ---truncated--- | |||||
| CVE-2024-38596 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix data races in unix_release_sock/unix_stream_sendmsg A data-race condition has been identified in af_unix. In one data path, the write function unix_release_sock() atomically writes to sk->sk_shutdown using WRITE_ONCE. However, on the reader side, unix_stream_sendmsg() does not read it atomically. Consequently, this issue is causing the following KCSAN splat to occur: BUG: KCSAN: data-race in unix_release_sock / unix_stream_sendmsg write (marked) to 0xffff88867256ddbb of 1 bytes by task 7270 on cpu 28: unix_release_sock (net/unix/af_unix.c:640) unix_release (net/unix/af_unix.c:1050) sock_close (net/socket.c:659 net/socket.c:1421) __fput (fs/file_table.c:422) __fput_sync (fs/file_table.c:508) __se_sys_close (fs/open.c:1559 fs/open.c:1541) __x64_sys_close (fs/open.c:1541) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) read to 0xffff88867256ddbb of 1 bytes by task 989 on cpu 14: unix_stream_sendmsg (net/unix/af_unix.c:2273) __sock_sendmsg (net/socket.c:730 net/socket.c:745) ____sys_sendmsg (net/socket.c:2584) __sys_sendmmsg (net/socket.c:2638 net/socket.c:2724) __x64_sys_sendmmsg (net/socket.c:2753 net/socket.c:2750 net/socket.c:2750) x64_sys_call (arch/x86/entry/syscall_64.c:33) do_syscall_64 (arch/x86/entry/common.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) value changed: 0x01 -> 0x03 The line numbers are related to commit dd5a440a31fa ("Linux 6.9-rc7"). Commit e1d09c2c2f57 ("af_unix: Fix data races around sk->sk_shutdown.") addressed a comparable issue in the past regarding sk->sk_shutdown. However, it overlooked resolving this particular data path. This patch only offending unix_stream_sendmsg() function, since the other reads seem to be protected by unix_state_lock() as discussed in | |||||
| CVE-2024-38191 | 1 Microsoft | 13 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 10 more | 2026-06-17 | N/A | 7.8 HIGH |
| Kernel Streaming Service Driver Elevation of Privilege Vulnerability | |||||
| CVE-2024-38137 | 1 Microsoft | 8 Windows 10 21h2, Windows 10 22h2, Windows 11 21h2 and 5 more | 2026-06-17 | N/A | 7.0 HIGH |
| Windows Resource Manager PSM Service Extension Elevation of Privilege Vulnerability | |||||
| CVE-2024-38136 | 1 Microsoft | 10 Windows 10 1809, Windows 10 21h2, Windows 10 22h2 and 7 more | 2026-06-17 | N/A | 7.0 HIGH |
| Windows Resource Manager PSM Service Extension Elevation of Privilege Vulnerability | |||||
| CVE-2024-36899 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: Fix use after free in lineinfo_changed_notify The use-after-free issue occurs as follows: when the GPIO chip device file is being closed by invoking gpio_chrdev_release(), watched_lines is freed by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier chain failed due to waiting write rwsem. Additionally, one of the GPIO chip's lines is also in the release process and holds the notifier chain's read rwsem. Consequently, a race condition leads to the use-after-free of watched_lines. Here is the typical stack when issue happened: [free] gpio_chrdev_release() --> bitmap_free(cdev->watched_lines) <-- freed --> blocking_notifier_chain_unregister() --> down_write(&nh->rwsem) <-- waiting rwsem --> __down_write_common() --> rwsem_down_write_slowpath() --> schedule_preempt_disabled() --> schedule() [use] st54spi_gpio_dev_release() --> gpio_free() --> gpiod_free() --> gpiod_free_commit() --> gpiod_line_state_notify() --> blocking_notifier_call_chain() --> down_read(&nh->rwsem); <-- held rwsem --> notifier_call_chain() --> lineinfo_changed_notify() --> test_bit(xxxx, cdev->watched_lines) <-- use after free The side effect of the use-after-free issue is that a GPIO line event is being generated for userspace where it shouldn't. However, since the chrdev is being closed, userspace won't have the chance to read that event anyway. To fix the issue, call the bitmap_free() function after the unregistration of lineinfo_changed_nb notifier chain. | |||||
| CVE-2024-36623 | 1 Mobyproject | 1 Moby | 2026-06-17 | N/A | 8.1 HIGH |
| moby through v25.0.3 has a Race Condition vulnerability in the streamformatter package which can be used to trigger multiple concurrent write operations resulting in data corruption or application crashes. | |||||
| CVE-2024-36621 | 1 Mobyproject | 1 Moby | 2026-06-17 | N/A | 6.5 MEDIUM |
| moby v25.0.5 is affected by a Race Condition in builder/builder-next/adapters/snapshot/layer.go. The vulnerability could be used to trigger concurrent builds that call the EnsureLayer function resulting in resource leaks/exhaustion. | |||||