Total
7818 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2020-7531 | 1 Schneider-electric | 1 Scadapack 7x Remote Connect | 2026-06-17 | 6.8 MEDIUM | 7.8 HIGH |
| A CWE-284 Improper Access Control vulnerability exists in SCADAPack 7x Remote Connect (V3.6.3.574 and prior) which allows an attacker to place executables in a specific folder and run code whenever RemoteConnect is executed by the user. | |||||
| CVE-2020-7278 | 1 Mcafee | 1 Endpoint Security | 2026-06-17 | 4.0 MEDIUM | 7.4 HIGH |
| Exploiting incorrectly configured access control security levels vulnerability in ENS Firewall in McAfee Endpoint Security (ENS) for Windows prior to 10.7.0 April 2020 and 10.6.1 April 2020 updates allows remote attackers and local users to allow or block unauthorized traffic via pre-existing rules not being handled correctly when updating to the February 2020 updates. | |||||
| CVE-2020-7253 | 1 Mcafee | 1 Agent | 2026-06-17 | 2.1 LOW | 5.7 MEDIUM |
| Improper access control vulnerability in masvc.exe in McAfee Agent (MA) prior to 5.6.4 allows local users with administrator privileges to disable self-protection via a McAfee supplied command-line utility. | |||||
| CVE-2020-7038 | 1 Avaya | 1 Equinox Conferencing | 2026-06-17 | 5.0 MEDIUM | 7.5 HIGH |
| A vulnerability was discovered in Management component of Avaya Equinox Conferencing that could potentially allow an unauthenticated, remote attacker to gain access to screen sharing and whiteboard sessions. The affected versions of Management component of Avaya Equinox Conferencing include all 3.x versions before 3.17. Avaya Equinox Conferencing is now offered as Avaya Meetings Server. | |||||
| CVE-2020-6971 | 1 Emerson | 1 Valvelink | 2026-06-17 | 4.6 MEDIUM | 7.8 HIGH |
| In Emerson ValveLink v12.0.264 to v13.4.118, a vulnerability in the ValveLink software may allow a local, unprivileged, trusted insider to escalate privileges due to insecure configuration parameters. | |||||
| CVE-2020-6774 | 1 Bosch | 2 Recording Station, Recording Station Firmware | 2026-06-17 | 7.2 HIGH | 9.3 CRITICAL |
| Improper Access Control in the Kiosk Mode functionality of Bosch Recording Station allows a local unauthenticated attacker to escape from the Kiosk Mode and access the underlying operating system. | |||||
| CVE-2020-5396 | 1 Vmware | 2 Gemfire, Tanzu Gemfire For Virtual Machines | 2026-06-17 | 6.5 MEDIUM | 8.8 HIGH |
| VMware GemFire versions prior to 9.10.0, 9.9.2, 9.8.7, and 9.7.6, and VMware Tanzu GemFire for VMs versions prior to 1.11.1 and 1.10.2, when deployed without a SecurityManager, contain a JMX service available which contains an insecure default configuration. This allows a malicious user to create an MLet mbean leading to remote code execution. | |||||
| CVE-2020-5302 | 1 Mh-wikibot Project | 1 Mh-wikibot | 2026-06-17 | 6.4 MEDIUM | 8.2 HIGH |
| MH-WikiBot (an IRC Bot for interacting with the Miraheze API), had a bug that allowed any unprivileged user to access the steward commands on the IRC interface by impersonating the Nickname used by a privileged user as no check was made to see if they were logged in. The issue has been fixed in commit 23d9d5b0a59667a5d6816fdabb960b537a5f9ed1. | |||||
| CVE-2020-5293 | 1 Prestashop | 1 Prestashop | 2026-06-17 | 6.4 MEDIUM | 6.5 MEDIUM |
| In PrestaShop between versions 1.7.0.0 and 1.7.6.5, there are improper access controls on product page with combinations, attachments and specific prices. The problem is fixed in 1.7.6.5. | |||||
| CVE-2020-5288 | 1 Prestashop | 1 Prestashop | 2026-06-17 | 6.4 MEDIUM | 4.1 MEDIUM |
| "In PrestaShop between versions 1.7.0.0 and 1.7.6.5, there is improper access controls on product attributes page. The problem is fixed in 1.7.6.5. | |||||
| CVE-2020-5287 | 1 Prestashop | 1 Prestashop | 2026-06-17 | 6.4 MEDIUM | 4.1 MEDIUM |
| In PrestaShop between versions 1.5.5.0 and 1.7.6.5, there is improper access control on customers search. The problem is fixed in 1.7.6.5. | |||||
| CVE-2020-5279 | 1 Prestashop | 1 Prestashop | 2026-06-17 | 6.4 MEDIUM | 4.1 MEDIUM |
| In PrestaShop between versions 1.5.0.0 and 1.7.6.5, there are improper access control since the the version 1.5.0.0 for legacy controllers. - admin-dev/index.php/configure/shop/customer-preferences/ - admin-dev/index.php/improve/international/translations/ - admin-dev/index.php/improve/international/geolocation/ - admin-dev/index.php/improve/international/localization - admin-dev/index.php/configure/advanced/performance - admin-dev/index.php/sell/orders/delivery-slips/ - admin-dev/index.php?controller=AdminStatuses The problem is fixed in 1.7.6.5 | |||||
| CVE-2020-5244 | 1 Buddypress | 1 Buddypress | 2026-06-17 | 5.0 MEDIUM | 8.0 HIGH |
| In BuddyPress before 5.1.2, requests to a certain REST API endpoint can result in private user data getting exposed. Authentication is not needed. This has been patched in version 5.1.2. | |||||
| CVE-2020-5242 | 1 Openhab | 1 Openhab | 2026-06-17 | 9.3 HIGH | 7.7 HIGH |
| openHAB before 2.5.2 allow a remote attacker to use REST calls to install the EXEC binding or EXEC transformation service and execute arbitrary commands on the system with the privileges of the user running openHAB. Starting with version 2.5.2 all commands need to be whitelisted in a local file which cannot be changed via REST calls. | |||||
| CVE-2020-4107 | 1 Hcltech | 1 Domino | 2026-06-17 | 4.6 MEDIUM | 8.8 HIGH |
| HCL Domino is affected by an Insufficient Access Control vulnerability. An authenticated attacker with local access to the system could exploit this vulnerability to attain escalation of privileges, denial of service, or information disclosure. | |||||
| CVE-2020-4062 | 1 Cyberark | 1 Conjur Oss Helm Chart | 2026-06-17 | 7.7 HIGH | 8.7 HIGH |
| In Conjur OSS Helm Chart before 2.0.0, a recently identified critical vulnerability resulted in the installation of the Conjur Postgres database with an open port. This allows an attacker to gain full read & write access to the Conjur Postgres database, including escalating the attacker's privileges to assume full control. A malicious actor who knows the IP address and port number of the Postgres database and has access into the Kubernetes cluster where Conjur runs can gain full read & write access to the Postgres database. This enables the attacker to write a policy that allows full access to retrieve any secret. This Helm chart is a method to install Conjur OSS into a Kubernetes environment. Hence, the systems impacted are only Conjur OSS systems that were deployed using this chart. Other deployments including Docker and the CyberArk Dynamic Access Provider (DAP) are not affected. To remediate this vulnerability, clone the latest Helm Chart and follow the upgrade instructions. If you are not able to fully remediate this vulnerability immediately, you can mitigate some of the risk by making sure Conjur OSS is deployed on an isolated Kubernetes cluster or namespace. The term "isolated" refers to: - No other workloads besides Conjur OSS and its backend database are running in that Kubernetes cluster/namespace. - Kubernetes and helm access to the cluster/namespace is limited to security administrators via Role-Based Access Control (RBAC). | |||||
| CVE-2020-3592 | 1 Cisco | 2 Catalyst Sd-wan Manager, Sd-wan Vmanage | 2026-06-17 | 4.0 MEDIUM | 6.5 MEDIUM |
| A vulnerability in the web-based management interface of Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to bypass authorization and modify the configuration of an affected system. The vulnerability is due to insufficient authorization checking on an affected system. An attacker could exploit this vulnerability by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to gain privileges beyond what would normally be authorized for their configured user authorization level. This could allow the attacker to modify the configuration of an affected system. | |||||
| CVE-2020-3524 | 1 Cisco | 26 4221 Integrated Services Router, 4331 Integrated Services Router, 4431 Integrated Services Router and 23 more | 2026-06-17 | 6.9 MEDIUM | 6.8 MEDIUM |
| A vulnerability in the Cisco IOS XE ROM Monitor (ROMMON) Software for Cisco 4000 Series Integrated Services Routers, Cisco ASR 920 Series Aggregation Services Routers, Cisco ASR 1000 Series Aggregation Services Routers, and Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, physical attacker to break the chain of trust and load a compromised software image on an affected device. The vulnerability is due to the presence of a debugging configuration option in the affected software. An attacker could exploit this vulnerability by connecting to an affected device through the console, forcing the device into ROMMON mode, and writing a malicious pattern using that specific option on the device. A successful exploit could allow the attacker to break the chain of trust and load a compromised software image on the affected device. A compromised software image is any software image that has not been digitally signed by Cisco. | |||||
| CVE-2020-3522 | 1 Cisco | 1 Data Center Network Manager | 2026-06-17 | 6.5 MEDIUM | 6.3 MEDIUM |
| A vulnerability in the web-based management interface of Cisco Data Center Network Manager (DCNM) Software could allow an authenticated, remote attacker to bypass authorization on an affected device and access sensitive information that is related to the device. The vulnerability exists because the affected software allows users to access resources that are intended for administrators only. An attacker could exploit this vulnerability by submitting a crafted URL to an affected device. A successful exploit could allow the attacker to add, delete, and edit certain network configurations in the same manner as a user with administrative privileges. | |||||
| CVE-2020-3503 | 1 Cisco | 128 1100-4g Integrated Services Router, 1100-4gltegb Integrated Services Router, 1100-4gltena Integrated Services Router and 125 more | 2026-06-17 | 3.6 LOW | 6.0 MEDIUM |
| A vulnerability in the file system permissions of Cisco IOS XE Software could allow an authenticated, local attacker to obtain read and write access to critical configuration or system files. The vulnerability is due to insufficient file system permissions on an affected device. An attacker could exploit this vulnerability by connecting to an affected device's guest shell, and accessing or modifying restricted files. A successful exploit could allow the attacker to view or modify restricted information or configurations that are normally not accessible to system administrators. | |||||