Total
697 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-58400 | 2026-10-27 | N/A | 8.2 HIGH | ||
| llama.cpp before b3701 contains an out-of-bounds read vulnerability in llama_decode_internal and llama_encode_internal that allows remote unauthenticated attackers to read memory by supplying unvalidated token IDs. Attackers can send integer-array prompts to the llama-server /completion endpoint with IDs outside 0 to n_vocab to read embedding memory out of bounds or crash the process. | |||||
| CVE-2026-107325 | 1 Mongodb | 1 Go Driver | 2026-10-27 | N/A | 5.9 MEDIUM |
| Improper validation of a BSON array length in the MongoDB Go Driver can cause an out-of-bounds index and runtime panic when an application calls bson.RawArray.Validate or bsoncore.Array.Validate on a malformed four-byte array. An unauthenticated actor who can supply raw BSON array data to an affected application may terminate an unprotected application process, causing a denial of service. No confidentiality or integrity impact has been identified. | |||||
| CVE-2026-116731 | 2026-10-27 | N/A | 6.1 MEDIUM | ||
| Furnace through 0.6.8.3 contains an out-of-bounds write vulnerability in DivEngine::loadFTM() that allows attackers to corrupt heap memory via an unchecked subsong index in the GROOVES block. Attackers can craft a FamiTracker module with a subsong count of 2 or more to write a groove pattern past the subsong vector, crashing Furnace when opened. | |||||
| CVE-2026-40886 | 1 Argoproj | 1 Argo Workflows | 2026-10-26 | N/A | 7.7 HIGH |
| Argo Workflows is an open source container-native workflow engine for orchestrating parallel jobs on Kubernetes. From 3.6.5 to 4.0.4, an unchecked array index in the pod informer's podGCFromPod() function causes a controller-wide panic when a workflow pod carries a malformed workflows.argoproj.io/pod-gc-strategy annotation. Because the panic occurs inside an informer goroutine (outside the controller's recover() scope), it crashes the entire controller process. The poisoned pod persists across restarts, causing a crash loop that halts all workflow processing until the pod is manually deleted. This vulnerability is fixed in 4.0.5 and 3.7.14. | |||||
| CVE-2026-40097 | 1 Smallstep | 1 Step-ca | 2026-10-26 | N/A | 3.7 LOW |
| Step CA is an online certificate authority for secure, automated certificate management for DevOps. From 0.24.0 to before 0.30.0-rc3, an attacker can trigger an index out-of-bounds panic in Step CA by sending a crafted attestation key (AK) certificate with an empty Extended Key Usage (EKU) extension during TPM device attestation. When processing a device-attest-01 ACME challenge using TPM attestation, Step CA validates that the AK certificate contains the tcg-kp-AIKCertificate Extended Key Usage OID. During this validation, the EKU extension value is decoded from its ASN.1 representation and the first element is checked. A crafted certificate could include an EKU extension that decodes to an empty sequence, causing the code to panic when accessing the first element of the empty slice. This vulnerability is only reachable when a device-attest-01 ACME challenge with TPM attestation is configured. Deployments not using TPM device attestation are not affected. This vulnerability is fixed in 0.30.0-rc3. | |||||
| CVE-2026-41643 | 1 Osrg | 1 Gobgp | 2026-10-26 | N/A | 7.5 HIGH |
| GoBGP is an open source Border Gateway Protocol (BGP) implementation in the Go Programming Language. Prior to version 4.3.0, a remote Denial of Service (DoS) vulnerability exists in GoBGP where a malformed BGP UPDATE message can trigger a runtime error: index out of range panic. This occurs during the processing of 4-byte AS attributes when the message structure causes an internal slice index shift that is not properly handled. This issue has been patched in version 4.3.0. | |||||
| CVE-2026-34942 | 1 Bytecodealliance | 1 Wasmtime | 2026-10-26 | N/A | 6.5 MEDIUM |
| Wasmtime is a runtime for WebAssembly. Prior to 24.0.7, 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of transcoding strings into the Component Model's utf16 or latin1+utf16 encodings improperly verified the alignment of reallocated strings. This meant that unaligned pointers could be passed to the host for transcoding which would trigger a host panic. This panic is possible to trigger from malicious guests which transfer very specific strings across components with specific addresses. Host panics are considered a DoS vector in Wasmtime as the panic conditions are controlled by the guest in this situation. This vulnerability is fixed in 24.0.7, 36.0.7, 42.0.2, and 43.0.1. | |||||
| CVE-2026-6840 | 1 Samsung | 1 One | 2026-10-26 | N/A | 5.5 MEDIUM |
| Missing bounds validation for operator could allow out of range operator-code lookup during model loading Affected version is prior to commit 1.30.0. | |||||
| CVE-2026-40251 | 1 Linuxcontainers | 1 Incus | 2026-10-26 | N/A | 6.5 MEDIUM |
| Incus is a system container and virtual machine manager. In versions before 7.0.0, missing validation logic in the storage volume import logic allows an authenticated user with access to the storage volume feature to cause the Incus daemon to crash. The backup restore subsystem contains an out-of-bounds panic vulnerability caused by an invalid bounds check when indexing snapshot metadata arrays, and the same flawed pattern also appears in the migration path. When iterating through physical snapshots provided in a backup archive, the loop uses the index to look up corresponding metadata in the parsed `Config.Snapshots` and `Config.VolumeSnapshots` slices. The guard condition `len(slice) >= i-1` is incorrect because it can still evaluate to true when the subsequent slice[i] access is out of bounds. An attacker can submit a backup archive that contains physical snapshot directories while supplying a tampered `index.yaml` with an empty or truncated snapshot metadata array, causing the daemon to index beyond the end of the metadata slice and crash. Repeated use of this issue can be used to keep Incus offline, causing a denial of service. This issue is fixed in version 7.0.0. | |||||
| CVE-2026-82945 | 2026-10-26 | N/A | 6.5 MEDIUM | ||
| SOEM version 2.0.0 and earlier contains a vulnerability during device configuration where a malicious device can cause memory corruption. The software writes configuration data to a fixed-size array without checking if the array index exceeds its maximum size of EC_MAXFMMU entries. A device presenting more than EC_MAXFMMU configuration blocks can force writes beyond the array boundary, corrupting adjacent memory structures and potentially disrupting subsequent operations. | |||||
| CVE-2026-44310 | 2026-10-26 | N/A | 5.4 MEDIUM | ||
| Gitsign is a keyless Sigstore to signing tool for Git commits with your a GitHub / OIDC identity. From 0.4.0 to before 0.15.0, CertVerifier.Verify() in pkg/git/verifier.go unconditionally dereferences certs[0] after sd.GetCertificates() without checking the slice length. A CMS/PKCS7 signed message with an empty certificate set is a structurally valid DER payload; GetCertificates() returns an empty slice with no error, causing an immediate index-out-of-range panic. On the gitsign --verify code path (the GPG-compatible mode invoked by git verify-commit), the panic is silently recovered by internal/io/streams.go's Wrap() function, which returns nil instead of an error. main.go then exits with code 0, causing exit-code-only verification callers to interpret the failed verification as success. This vulnerability is fixed in 0.15.0. | |||||
| CVE-2026-82947 | 2026-10-26 | N/A | 7.1 HIGH | ||
| SOEM version 2.0.0 and earlier contains multiple vulnerabilities in frame processing where a malicious device can cause the master to read data outside allocated buffers. The software uses length and offset values from device messages without validating them against buffer sizes. This can cause the master to access invalid memory locations, potentially disclosing sensitive information or causing crashes. | |||||
| CVE-2026-32682 | 1 F5 | 1 Nginx Gateway Fabric | 2026-10-26 | N/A | 6.5 MEDIUM |
| When NGINX Gateway Fabric is configured using GRPCRoutes, an authenticated, remote attacker with permission to create or modify GRPCRoute resources can cause the NGINX Gateway Fabric control plane to terminate by sending undisclosed GRPCRoute configurations containing backendRef filters. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | |||||
| CVE-2026-16849 | 1 Ibm | 2 Aix, Vios | 2026-10-26 | N/A | 4.3 MEDIUM |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to cause a denial of service due to an improper check for an array index boundary. | |||||
| CVE-2026-56111 | 2026-10-25 | N/A | 9.1 CRITICAL | ||
| Marlin Firmware through 2.1.2.7, fixed in commit 1f255d1, when built with MESH_BED_LEVELING enabled, contains an out-of-bounds write vulnerability in the M421 G-code handler that allows attackers to corrupt firmware memory by supplying out-of-range X and Y grid indices. Attackers can send a single crafted G-code command via USB serial, network interface, or malicious gcode file to write an attacker-controlled 32-bit float value past the z_values array bounds, corrupting adjacent firmware variables and causing denial of service or firmware state corruption. | |||||
| CVE-2026-56770 | 2026-10-25 | N/A | 7.5 HIGH | ||
| libais through 0.15 VdmStream::AddLine uses an unchecked sentinel value as a vector index when processing AIS sentences with empty or out-of-range sequential message IDs. Remote attackers can crash services or vessel systems by sending crafted AIVDM sentences over VHF marine radio or IP feeds, causing out-of-bounds memory access and potential corruption. | |||||
| CVE-2026-57269 | 2026-10-25 | N/A | 8.3 HIGH | ||
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### disconnect command index-out-of-bound | |||||
| CVE-2026-57266 | 2026-10-25 | N/A | 8.3 HIGH | ||
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### 2wayAudio command index-out-of-bound | |||||
| CVE-2026-13132 | 2026-10-25 | N/A | 8.3 HIGH | ||
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### setStream command index-out-of-bound | |||||
| CVE-2026-57267 | 2026-10-25 | N/A | 8.3 HIGH | ||
| GeoWebPlayer (also called "Web Plugin" in the GV-VMS documentation and "WS Player" for VMS-Cloud) is an addon that can be installed with various GeoVision software (GV-VMS, GV-Cloud, ...). It creates a websocket server that expands the capabilities of the various web-interfaces provided by the GeoVision software and may be necessary for them to function properly. The Websocket server can accept various commands coming from localhost. Many of the commands will take an `index` value that is then used to access various arrays to enter critical sections, perform various actions via function calls, etc. However the `index` value is usually not checked for valid range, and as such it can be used to access multiple arrays out-of-bound. #### snapshot command index-out-of-bound | |||||