Total
408970 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-53180 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Avoid NULL pointer access during management transmit cleanup Currently 'ar' reference is not added in skb_cb. Though this is generally not used during transmit completion callbacks, on interface removal the remaining idr cleanup callback uses the ar pointer from skb_cb from management txmgmt_idr. Hence fill them during transmit call for proper usage to avoid NULL pointer dereference. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 | |||||
| CVE-2023-53177 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: hi846: fix usage of pm_runtime_get_if_in_use() pm_runtime_get_if_in_use() does not only return nonzero values when the device is in use, it can return a negative errno too. And especially during resuming from system suspend, when runtime pm is not yet up again, -EAGAIN is being returned, so the subsequent pm_runtime_put() call results in a refcount underflow. Fix system-resume by handling -EAGAIN of pm_runtime_get_if_in_use(). | |||||
| CVE-2023-53175 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: PCI: hv: Fix a crash in hv_pci_restore_msi_msg() during hibernation When a Linux VM with an assigned PCI device runs on Hyper-V, if the PCI device driver is not loaded yet (i.e. MSI-X/MSI is not enabled on the device yet), doing a VM hibernation triggers a panic in hv_pci_restore_msi_msg() -> msi_lock_descs(&pdev->dev), because pdev->dev.msi.data is still NULL. Avoid the panic by checking if MSI-X/MSI is enabled. | |||||
| CVE-2023-53174 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix possible memory leak if device_add() fails If device_add() returns error, the name allocated by dev_set_name() needs be freed. As the comment of device_add() says, put_device() should be used to decrease the reference count in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanp(). | |||||
| CVE-2023-53173 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tty: pcn_uart: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. | |||||
| CVE-2023-53172 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fsverity: reject FS_IOC_ENABLE_VERITY on mode 3 fds Commit 56124d6c87fd ("fsverity: support enabling with tree block size < PAGE_SIZE") changed FS_IOC_ENABLE_VERITY to use __kernel_read() to read the file's data, instead of direct pagecache accesses. An unintended consequence of this is that the 'WARN_ON_ONCE(!(file->f_mode & FMODE_READ))' in __kernel_read() became reachable by fuzz tests. This happens if FS_IOC_ENABLE_VERITY is called on a fd opened with access mode 3, which means "ioctl access only". Arguably, FS_IOC_ENABLE_VERITY should work on ioctl-only fds. But ioctl-only fds are a weird Linux extension that is rarely used and that few people even know about. (The documentation for FS_IOC_ENABLE_VERITY even specifically says it requires O_RDONLY.) It's probably not worthwhile to make the ioctl internally open a new fd just to handle this case. Thus, just reject the ioctl on such fds for now. | |||||
| CVE-2023-53171 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: vfio/type1: prevent underflow of locked_vm via exec() When a vfio container is preserved across exec, the task does not change, but it gets a new mm with locked_vm=0, and loses the count from existing dma mappings. If the user later unmaps a dma mapping, locked_vm underflows to a large unsigned value, and a subsequent dma map request fails with ENOMEM in __account_locked_vm. To avoid underflow, grab and save the mm at the time a dma is mapped. Use that mm when adjusting locked_vm, rather than re-acquiring the saved task's mm, which may have changed. If the saved mm is dead, do nothing. locked_vm is incremented for existing mappings in a subsequent patch. | |||||
| CVE-2023-53169 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86/resctrl: Clear staged_config[] before and after it is used As a temporary storage, staged_config[] in rdt_domain should be cleared before and after it is used. The stale value in staged_config[] could cause an MSR access error. Here is a reproducer on a system with 16 usable CLOSIDs for a 15-way L3 Cache (MBA should be disabled if the number of CLOSIDs for MB is less than 16.) : mount -t resctrl resctrl -o cdp /sys/fs/resctrl mkdir /sys/fs/resctrl/p{1..7} umount /sys/fs/resctrl/ mount -t resctrl resctrl /sys/fs/resctrl mkdir /sys/fs/resctrl/p{1..8} An error occurs when creating resource group named p8: unchecked MSR access error: WRMSR to 0xca0 (tried to write 0x00000000000007ff) at rIP: 0xffffffff82249142 (cat_wrmsr+0x32/0x60) Call Trace: <IRQ> __flush_smp_call_function_queue+0x11d/0x170 __sysvec_call_function+0x24/0xd0 sysvec_call_function+0x89/0xc0 </IRQ> <TASK> asm_sysvec_call_function+0x16/0x20 When creating a new resource control group, hardware will be configured by the following process: rdtgroup_mkdir() rdtgroup_mkdir_ctrl_mon() rdtgroup_init_alloc() resctrl_arch_update_domains() resctrl_arch_update_domains() iterates and updates all resctrl_conf_type whose have_new_ctrl is true. Since staged_config[] holds the same values as when CDP was enabled, it will continue to update the CDP_CODE and CDP_DATA configurations. When group p8 is created, get_config_index() called in resctrl_arch_update_domains() will return 16 and 17 as the CLOSIDs for CDP_CODE and CDP_DATA, which will be translated to an invalid register - 0xca0 in this scenario. Fix it by clearing staged_config[] before and after it is used. [reinette: re-order commit tags] | |||||
| CVE-2023-53168 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: usb: ucsi_acpi: Increase the command completion timeout Commit 130a96d698d7 ("usb: typec: ucsi: acpi: Increase command completion timeout value") increased the timeout from 5 seconds to 60 seconds due to issues related to alternate mode discovery. After the alternate mode discovery switch to polled mode the timeout was reduced, but instead of being set back to 5 seconds it was reduced to 1 second. This is causing problems when using a Lenovo ThinkPad X1 yoga gen7 connected over Type-C to a LG 27UL850-W (charging DP over Type-C). When the monitor is already connected at boot the following error is logged: "PPM init failed (-110)", /sys/class/typec is empty and on unplugging the NULL pointer deref fixed earlier in this series happens. When the monitor is connected after boot the following error is logged instead: "GET_CONNECTOR_STATUS failed (-110)". Setting the timeout back to 5 seconds fixes both cases. | |||||
| CVE-2023-53167 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix null pointer dereference in tracing_err_log_open() Fix an issue in function 'tracing_err_log_open'. The function doesn't call 'seq_open' if the file is opened only with write permissions, which results in 'file->private_data' being left as null. If we then use 'lseek' on that opened file, 'seq_lseek' dereferences 'file->private_data' in 'mutex_lock(&m->lock)', resulting in a kernel panic. Writing to this node requires root privileges, therefore this bug has very little security impact. Tracefs node: /sys/kernel/tracing/error_log Example Kernel panic: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 Call trace: mutex_lock+0x30/0x110 seq_lseek+0x34/0xb8 __arm64_sys_lseek+0x6c/0xb8 invoke_syscall+0x58/0x13c el0_svc_common+0xc4/0x10c do_el0_svc+0x24/0x98 el0_svc+0x24/0x88 el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x1b4/0x1b8 Code: d503201f aa0803e0 aa1f03e1 aa0103e9 (c8e97d02) ---[ end trace 561d1b49c12cf8a5 ]--- Kernel panic - not syncing: Oops: Fatal exception | |||||
| CVE-2023-53166 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: bq25890: Fix external_power_changed race bq25890_charger_external_power_changed() dereferences bq->charger, which gets sets in bq25890_power_supply_init() like this: bq->charger = devm_power_supply_register(bq->dev, &bq->desc, &psy_cfg); As soon as devm_power_supply_register() has called device_add() the external_power_changed callback can get called. So there is a window where bq25890_charger_external_power_changed() may get called while bq->charger has not been set yet leading to a NULL pointer dereference. This race hits during boot sometimes on a Lenovo Yoga Book 1 yb1-x90f when the cht_wcove_pwrsrc (extcon) power_supply is done with detecting the connected charger-type which happens to exactly hit the small window: BUG: kernel NULL pointer dereference, address: 0000000000000018 <snip> RIP: 0010:__power_supply_is_supplied_by+0xb/0xb0 <snip> Call Trace: <TASK> __power_supply_get_supplier_property+0x19/0x50 class_for_each_device+0xb1/0xe0 power_supply_get_property_from_supplier+0x2e/0x50 bq25890_charger_external_power_changed+0x38/0x1b0 [bq25890_charger] __power_supply_changed_work+0x30/0x40 class_for_each_device+0xb1/0xe0 power_supply_changed_work+0x5f/0xe0 <snip> Fixing this is easy. The external_power_changed callback gets passed the power_supply which will eventually get stored in bq->charger, so bq25890_charger_external_power_changed() can simply directly use the passed in psy argument which is always valid. | |||||
| CVE-2023-53165 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: udf: Fix uninitialized array access for some pathnames For filenames that begin with . and are between 2 and 5 characters long, UDF charset conversion code would read uninitialized memory in the output buffer. The only practical impact is that the name may be prepended a "unification hash" when it is not actually needed but still it is good to fix this. | |||||
| CVE-2023-53164 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/ti-sci: Fix refcount leak in ti_sci_intr_irq_domain_probe of_irq_find_parent() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak. | |||||
| CVE-2023-53163 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: don't hold ni_lock when calling truncate_setsize() syzbot is reporting hung task at do_user_addr_fault() [1], for there is a silent deadlock between PG_locked bit and ni_lock lock. Since filemap_update_page() calls filemap_read_folio() after calling folio_trylock() which will set PG_locked bit, ntfs_truncate() must not call truncate_setsize() which will wait for PG_locked bit to be cleared when holding ni_lock lock. | |||||
| CVE-2023-53161 | 1 Sequoia-pgp | 1 Buffered-reader | 2026-06-17 | N/A | 2.9 LOW |
| The buffered-reader crate before 1.1.5 for Rust allows out-of-bounds array access and a panic. | |||||
| CVE-2023-53160 | 1 Sequoia-pgp | 1 Sequoia-openpgp | 2026-06-17 | N/A | 2.9 LOW |
| The sequoia-openpgp crate before 1.16.0 for Rust allows out-of-bounds array access and a panic. | |||||
| CVE-2023-53158 | 2026-06-17 | N/A | 4.1 MEDIUM | ||
| The gix-transport crate before 0.36.1 for Rust allows command execution via the "gix clone 'ssh://-oProxyCommand=open$IFS" substring. NOTE: this was discovered before CVE-2024-32884, a similar vulnerability (involving a username field) that is more difficult to exploit. | |||||
| CVE-2023-53157 | 1 Rosenpass | 1 Rosenpass | 2026-06-17 | N/A | 5.3 MEDIUM |
| The rosenpass crate before 0.2.1 for Rust allows remote attackers to cause a denial of service (panic) via a one-byte UDP packet. | |||||
| CVE-2023-53156 | 1 Ejmahler | 1 Transpose | 2026-06-17 | N/A | 4.5 MEDIUM |
| The transpose crate before 0.2.3 for Rust allows an integer overflow via input_width and input_height arguments. | |||||
| CVE-2023-53155 | 2026-06-17 | N/A | 7.2 HIGH | ||
| goform/formTest in EmbedThis GoAhead 2.5 allows HTML injection via the name parameter. | |||||