Total
396984 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-84145 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-09-03 | N/A | 7.5 HIGH |
| Internally found bugs present in Thunderbird 154, Thunderbird ESR 153.1 and Thunderbird ESR 140.14. Some of these bugs showed evidence of memory corruption or another security-relevant defect and we presume that with enough effort some of these could have been exploited. This vulnerability was fixed in Firefox 155, Firefox ESR 115.40, Firefox ESR 140.15, Firefox ESR 153.2, Thunderbird 155, Thunderbird 140.15, and Thunderbird 153.2. | |||||
| CVE-2026-64083 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) reject short block-read responses in the GPIO accessors adm1266_gpio_get() and adm1266_gpio_get_multiple() both compose the pin-status word as pins_status = read_buf[0] + (read_buf[1] << 8); right after i2c_smbus_read_block_data(), guarding only against an error return. A well-behaved device returns 2 bytes for GPIO_STATUS/PDIO_STATUS, but the helper happily reports a 0- or 1-byte response too. If the device returns 0 bytes, both read_buf slots are uninitialized stack memory; if it returns 1 byte, read_buf[1] is. The composed value then flows through set_bit() into the caller's *bits in adm1266_gpio_get_multiple(), or into the return value of adm1266_gpio_get(), and ends up in userspace via gpiolib (sysfs and the char-dev ioctls). That leaks a few bits of kernel stack per request on any device whose firmware glitch, bus error, or hostile slave produces a short block-read response. Add the missing length check to both call sites and surface a short response as -EIO. | |||||
| CVE-2026-64084 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) cap PDIO scan in get_multiple at ADM1266_PDIO_NR adm1266_gpio_get_multiple() iterates the PDIO portion of the caller-supplied mask using for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_STATUS) { ... } where ADM1266_PDIO_STATUS is the PMBus command code (0xE9, i.e. 233), not the number of PDIO pins. The intended upper bound is ADM1266_GPIO_NR + ADM1266_PDIO_NR = 25. gpiolib hands in a mask sized for gc.ngpio (= 25 bits on this chip), so the iteration walks find_next_bit() up to 242, reading up to 217 extra bits (a handful of unsigned-long words: four on 64-bit, seven on 32-bit) of whatever lives past the end of the mask in the caller's stack. Any incidental set bit in that range then drives a set_bit(gpio_nr, bits) call that writes past the end of the caller-supplied bits array too -- both out-of-bounds. Substitute ADM1266_PDIO_NR for the constant so the scan stops at the last real PDIO bit. | |||||
| CVE-2026-64085 | 1 Linux | 1 Linux Kernel | 2026-09-03 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) bounce blackbox records through a protocol-sized buffer adm1266_pmbus_block_xfer() copies the device-supplied block payload into the caller-provided buffer using the device-supplied length: memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]); The helper does not know how large data_r is and trusts the device to return at most one record's worth of bytes. adm1266_nvmem_read_blackbox() violates that contract: it advances read_buff inside data->dev_mem in ADM1266_BLACKBOX_SIZE (64-byte) strides while the helper is willing to write up to ADM1266_PMBUS_BLOCK_MAX (255) bytes. A device that returns more than 64 bytes on the trailing record (read_buff offset 1984 in the 2048-byte dev_mem allocation) overflows dev_mem by up to 191 bytes before the post-call if (ret != ADM1266_BLACKBOX_SIZE) return -EIO; can reject the response. Contain the fix in the caller without changing the helper signature: read each record into a 255-byte local bounce buffer that matches the helper's maximum output, validate the returned length, and only then copy exactly ADM1266_BLACKBOX_SIZE bytes into the dev_mem slot. | |||||
| CVE-2026-80235 | 2026-09-03 | N/A | 9.8 CRITICAL | ||
| EFence developed by Thinking Software Technology has an Arbitrary File Upload vulnerability. Unauthenticated remote attackers can upload and execute web shell backdoors, thereby enabling arbitrary code execution on the server. | |||||
| CVE-2026-80234 | 2026-09-03 | N/A | 5.3 MEDIUM | ||
| CAYIN CMS-WS and CMS-SE developed by CAYIN Technology have a Missing Authentication vulnerability. Unauthenticated remote attackers can obtain media file lists via specific functionality, resulting in partial information disclosure. | |||||
| CVE-2026-80227 | 2026-09-03 | N/A | N/A | ||
| Incorrect Comparison vulnerability in ash-project ash_sql allows a user to pad a string field with tab, newline, carriage-return, or form-feed characters and pass a trimmed uniqueness or equality check in the database that the same expression would fail in memory (or the reverse). string_trim/1 compiles to REGEXP_REPLACE patterns built from an Elixir string in which \s is the escape for a single space (codepoint 32), not a regex whitespace class. The generated SQL therefore removes only literal spaces and leaves tabs, newlines, carriage returns, and form feeds in place, whereas String.trim/1 in Elixir removes them all. Any Ash filter, validation, or identity that relies on string_trim/1 then behaves differently depending on whether Ash pushes the expression down to SQL or evaluates it in memory, so padded input can register a near-duplicate value or slip past a trimmed comparison. This issue affects ash_sql: from 0.1.0 before 0.7.1. | |||||
| CVE-2026-80223 | 2026-09-03 | N/A | N/A | ||
| Incorrect Authorization vulnerability in ash-project ash_graphql allows an authenticated subscriber in one tenant to receive another tenant's records over GraphQL subscriptions. The subscription resolver in AshGraphql.Graphql.Resolver authorizes each notification payload in memory: its fast path calls Ash.can/3 with run_queries?: false, which evaluates the read policy filter against the in-memory record via Ash.Expr.eval/2 and never issues a query. Ash applies multitenancy at query-build and data-layer-prefix time, not inside query.filter, so the evaluated policy carries no tenant condition and a tenant-B notification routed to a tenant-A subscriber is emitted whenever the policy filter is true. The single-notification clause has no tenant guard at all, and the batched clause checks only the head of the notification list, so non-head entries authorize purely in memory. A tenant-scoped read is reached only when filter evaluation fails. This issue affects ash_graphql: from 1.4.0 before 1.11.0. | |||||
| CVE-2026-80205 | 1 Nltk | 1 Nltk | 2026-09-03 | N/A | 7.5 HIGH |
| NLTK versions before 3.10.0 contain a regular expression denial of service vulnerability in Text.findall() and TokenSearcher.findall() methods that accept user-supplied regular expressions without validation or timeout. Attackers can supply crafted regex patterns that cause catastrophic backtracking, resulting in indefinite CPU saturation and denial of service to all users of the Python process. | |||||
| CVE-2026-80204 | 2026-09-03 | N/A | 5.4 MEDIUM | ||
| The Grav API plugin (getgrav/grav-plugin-api) before 1.0.18 does not apply the API-key scope cap in the injectSecurityTab() function of BlueprintController when deciding whether a page's security/permissions blueprint section is editable. Because the function performs raw isSuperAdmin()/hasPermission() checks without a request parameter, it cannot enforce scopeAllows(). A caller holding a scoped API key may therefore see (and potentially edit) page permission fields beyond the scope granted to the key. The end-to-end write-time impact was not fully confirmed by the reporter. | |||||
| CVE-2026-80203 | 2026-09-03 | N/A | 9.8 CRITICAL | ||
| The getgrav/grav-plugin-api plugin before 1.0.18 does not enforce API-key scope in the requireNotSuperTarget() function in UsersController.php across seven sensitive user-management endpoints. The check uses isSuperAdmin() on the acting account rather than verifying whether the specific API key carries super authority (via isSuperWithinScope()). As a result, an API key scoped below full super authority but belonging to a super-admin account can act against other super-admin accounts—disabling their 2FA, deleting their avatar, minting new API keys under their identity, or deleting their existing API keys. | |||||
| CVE-2026-80202 | 2026-09-03 | N/A | 8.8 HIGH | ||
| Kimai before 2.56.0 does not enforce team-membership checks in TimesheetVoter::voteOnAttribute(), which maps permissions only to own_timesheet or other_timesheet. As a result, any authenticated user with ROLE_TEAMLEAD (or a role holding edit_other_timesheet/delete_other_timesheet) can read, modify, and permanently delete timesheets belonging to any user system-wide via the API, regardless of team membership. Timesheet IDs are sequential integers and trivially enumerable. ROLE_USER accounts are correctly restricted. (Note: the maintainers characterize this behavior as matching the documented permission model.) | |||||
| CVE-2026-80195 | 2026-09-03 | N/A | 5.4 MEDIUM | ||
| Kimai before 2.63.0 contains a business logic / improper authorization vulnerability in the team update API endpoint (PATCH /api/teams/{id}), which removes all existing team members before validating the submitted replacement member list. An authenticated teamlead (or other user) with permission to edit a team can submit a malformed members payload; although Kimai returns a validation error, the existing membership rows have already been deleted. This bypasses the dedicated member-removal endpoint's protection against removing teamleaders and can leave a team with no members or teamleaders, disrupting team-based access control. | |||||
| CVE-2026-80138 | 2026-09-03 | N/A | 9.8 CRITICAL | ||
| ClipBucket V5's web installer fails to properly validate or escape the php_cli_filepath parameter before passing it to shell execution. Unauthenticated attackers can submit a crafted POST request to the installer with a malicious php_cli_filepath value to execute arbitrary commands as the web server user. | |||||
| CVE-2026-78468 | 2026-09-03 | N/A | N/A | ||
| Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-78270. Reason: This candidate is a reservation duplicate of CVE-2026-78270. Notes: All CVE users should reference CVE-2026-78270 instead of this candidate. All references and descriptions in this candidate have been removed to prevent accidental usage. | |||||
| CVE-2026-78467 | 2026-09-03 | N/A | N/A | ||
| Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-78272. Reason: This candidate is a reservation duplicate of CVE-2026-78272. Notes: All CVE users should reference CVE-2026-78272 instead of this candidate. All references and descriptions in this candidate have been removed to prevent accidental usage. | |||||
| CVE-2026-78466 | 2026-09-03 | N/A | N/A | ||
| Rejected reason: ** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-78278. Reason: This candidate is a reservation duplicate of CVE-2026-78278. Notes: All CVE users should reference CVE-2026-78278 instead of this candidate. All references and descriptions in this candidate have been removed to prevent accidental usage. | |||||
| CVE-2026-78195 | 2026-09-03 | N/A | N/A | ||
| Rejected reason: Rejecting as a duplicate of CVE-2026-78047 | |||||
| CVE-2026-74234 | 2026-09-03 | N/A | N/A | ||
| Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | |||||
| CVE-2026-66049 | 2026-09-03 | N/A | N/A | ||
| Rejected reason: This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | |||||