Total
401033 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-52767 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tls: fix NULL deref on tls_sw_splice_eof() with empty record syzkaller discovered that if tls_sw_splice_eof() is executed as part of sendfile() when the plaintext/ciphertext sk_msg are empty, the send path gets confused because the empty ciphertext buffer does not have enough space for the encryption overhead. This causes tls_push_record() to go on the `split = true` path (which is only supposed to be used when interacting with an attached BPF program), and then get further confused and hit the tls_merge_open_record() path, which then assumes that there must be at least one populated buffer element, leading to a NULL deref. It is possible to have empty plaintext/ciphertext buffers if we previously bailed from tls_sw_sendmsg_locked() via the tls_trim_both_msgs() path. tls_sw_push_pending_record() already handles this case correctly; let's do the same check in tls_sw_splice_eof(). | |||||
| CVE-2023-52765 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 6.2 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mfd: qcom-spmi-pmic: Fix revid implementation The Qualcomm SPMI PMIC revid implementation is broken in multiple ways. First, it assumes that just because the sibling base device has been registered that means that it is also bound to a driver, which may not be the case (e.g. due to probe deferral or asynchronous probe). This could trigger a NULL-pointer dereference when attempting to access the driver data of the unbound device. Second, it accesses driver data of a sibling device directly and without any locking, which means that the driver data may be freed while it is being accessed (e.g. on driver unbind). Third, it leaks a struct device reference to the sibling device which is looked up using the spmi_device_from_of() every time a function (child) device is calling the revid function (e.g. on probe). Fix this mess by reimplementing the revid lookup so that it is done only at probe of the PMIC device; the base device fetches the revid info from the hardware, while any secondary SPMI device fetches the information from the base device and caches it so that it can be accessed safely from its children. If the base device has not been probed yet then probe of a secondary device is deferred. | |||||
| CVE-2023-52764 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: media: gspca: cpia1: shift-out-of-bounds in set_flicker Syzkaller reported the following issue: UBSAN: shift-out-of-bounds in drivers/media/usb/gspca/cpia1.c:1031:27 shift exponent 245 is too large for 32-bit type 'int' When the value of the variable "sd->params.exposure.gain" exceeds the number of bits in an integer, a shift-out-of-bounds error is reported. It is triggered because the variable "currentexp" cannot be left-shifted by more than the number of bits in an integer. In order to avoid invalid range during left-shift, the conditional expression is added. | |||||
| CVE-2023-52763 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: mipi-i3c-hci: Fix a kernel panic for accessing DAT_data. The `i3c_master_bus_init` function may attach the I2C devices before the I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails, the DAT `cleanup` will execute before the device is detached, which will execue DAT `free_entry` function. The above scenario can cause the driver to use DAT_data when it is NULL. | |||||
| CVE-2023-52762 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: virtio-blk: fix implicit overflow on virtio_max_dma_size The following codes have an implicit conversion from size_t to u32: (u32)max_size = (size_t)virtio_max_dma_size(vdev); This may lead overflow, Ex (size_t)4G -> (u32)0. Once virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX instead. | |||||
| CVE-2023-52757 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential deadlock when releasing mids All release_mid() callers seem to hold a reference of @mid so there is no need to call kref_put(&mid->refcount, __release_mid) under @server->mid_lock spinlock. If they don't, then an use-after-free bug would have occurred anyways. By getting rid of such spinlock also fixes a potential deadlock as shown below CPU 0 CPU 1 ------------------------------------------------------------------ cifs_demultiplex_thread() cifs_debug_data_proc_show() release_mid() spin_lock(&server->mid_lock); spin_lock(&cifs_tcp_ses_lock) spin_lock(&server->mid_lock) __release_mid() smb2_find_smb_tcon() spin_lock(&cifs_tcp_ses_lock) *deadlock* | |||||
| CVE-2023-52754 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: imon: fix access to invalid resource for the second interface imon driver probes two USB interfaces, and at the probe of the second interface, the driver assumes blindly that the first interface got bound with the same imon driver. It's usually true, but it's still possible that the first interface is bound with another driver via a malformed descriptor. Then it may lead to a memory corruption, as spotted by syzkaller; imon driver accesses the data from drvdata as struct imon_context object although it's a completely different one that was assigned by another driver. This patch adds a sanity check -- whether the first interface is really bound with the imon driver or not -- for avoiding the problem above at the probe time. | |||||
| CVE-2023-52753 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid NULL dereference of timing generator [Why & How] Check whether assigned timing generator is NULL or not before accessing its funcs to prevent NULL dereference. | |||||
| CVE-2023-52752 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-after-free bug in cifs_debug_data_proc_show() Skip SMB sessions that are being teared down (e.g. @ses->ses_status == SES_EXITING) in cifs_debug_data_proc_show() to avoid use-after-free in @ses. This fixes the following GPF when reading from /proc/fs/cifs/DebugData while mounting and umounting [ 816.251274] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6d81: 0000 [#1] PREEMPT SMP NOPTI ... [ 816.260138] Call Trace: [ 816.260329] <TASK> [ 816.260499] ? die_addr+0x36/0x90 [ 816.260762] ? exc_general_protection+0x1b3/0x410 [ 816.261126] ? asm_exc_general_protection+0x26/0x30 [ 816.261502] ? cifs_debug_tcon+0xbd/0x240 [cifs] [ 816.261878] ? cifs_debug_tcon+0xab/0x240 [cifs] [ 816.262249] cifs_debug_data_proc_show+0x516/0xdb0 [cifs] [ 816.262689] ? seq_read_iter+0x379/0x470 [ 816.262995] seq_read_iter+0x118/0x470 [ 816.263291] proc_reg_read_iter+0x53/0x90 [ 816.263596] ? srso_alias_return_thunk+0x5/0x7f [ 816.263945] vfs_read+0x201/0x350 [ 816.264211] ksys_read+0x75/0x100 [ 816.264472] do_syscall_64+0x3f/0x90 [ 816.264750] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 816.265135] RIP: 0033:0x7fd5e669d381 | |||||
| CVE-2023-52750 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer Prior to LLVM 15.0.0, LLVM's integrated assembler would incorrectly byte-swap NOP when compiling for big-endian, and the resulting series of bytes happened to match the encoding of FNMADD S21, S30, S0, S0. This went unnoticed until commit: 34f66c4c4d5518c1 ("arm64: Use a positive cpucap for FP/SIMD") Prior to that commit, the kernel would always enable the use of FPSIMD early in boot when __cpu_setup() initialized CPACR_EL1, and so usage of FNMADD within the kernel was not detected, but could result in the corruption of user or kernel FPSIMD state. After that commit, the instructions happen to trap during boot prior to FPSIMD being detected and enabled, e.g. | Unhandled 64-bit el1h sync exception on CPU0, ESR 0x000000001fe00000 -- ASIMD | CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1 | Hardware name: linux,dummy-virt (DT) | pstate: 400000c9 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : __pi_strcmp+0x1c/0x150 | lr : populate_properties+0xe4/0x254 | sp : ffffd014173d3ad0 | x29: ffffd014173d3af0 x28: fffffbfffddffcb8 x27: 0000000000000000 | x26: 0000000000000058 x25: fffffbfffddfe054 x24: 0000000000000008 | x23: fffffbfffddfe000 x22: fffffbfffddfe000 x21: fffffbfffddfe044 | x20: ffffd014173d3b70 x19: 0000000000000001 x18: 0000000000000005 | x17: 0000000000000010 x16: 0000000000000000 x15: 00000000413e7000 | x14: 0000000000000000 x13: 0000000000001bcc x12: 0000000000000000 | x11: 00000000d00dfeed x10: ffffd414193f2cd0 x9 : 0000000000000000 | x8 : 0101010101010101 x7 : ffffffffffffffc0 x6 : 0000000000000000 | x5 : 0000000000000000 x4 : 0101010101010101 x3 : 000000000000002a | x2 : 0000000000000001 x1 : ffffd014171f2988 x0 : fffffbfffddffcb8 | Kernel panic - not syncing: Unhandled exception | CPU: 0 PID: 0 Comm: swapper Not tainted 6.6.0-rc3-00013-g34f66c4c4d55 #1 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0xec/0x108 | show_stack+0x18/0x2c | dump_stack_lvl+0x50/0x68 | dump_stack+0x18/0x24 | panic+0x13c/0x340 | el1t_64_irq_handler+0x0/0x1c | el1_abort+0x0/0x5c | el1h_64_sync+0x64/0x68 | __pi_strcmp+0x1c/0x150 | unflatten_dt_nodes+0x1e8/0x2d8 | __unflatten_device_tree+0x5c/0x15c | unflatten_device_tree+0x38/0x50 | setup_arch+0x164/0x1e0 | start_kernel+0x64/0x38c | __primary_switched+0xbc/0xc4 Restrict CONFIG_CPU_BIG_ENDIAN to a known good assembler, which is either GNU as or LLVM's IAS 15.0.0 and newer, which contains the linked commit. | |||||
| CVE-2023-52749 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: spi: Fix null dereference on suspend A race condition exists where a synchronous (noqueue) transfer can be active during a system suspend. This can cause a null pointer dereference exception to occur when the system resumes. Example order of events leading to the exception: 1. spi_sync() calls __spi_transfer_message_noqueue() which sets ctlr->cur_msg 2. Spi transfer begins via spi_transfer_one_message() 3. System is suspended interrupting the transfer context 4. System is resumed 6. spi_controller_resume() calls spi_start_queue() which resets cur_msg to NULL 7. Spi transfer context resumes and spi_finalize_current_message() is called which dereferences cur_msg (which is now NULL) Wait for synchronous transfers to complete before suspending by acquiring the bus mutex and setting/checking a suspend flag. | |||||
| CVE-2023-52748 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: avoid format-overflow warning With gcc and W=1 option, there's a warning like this: fs/f2fs/compress.c: In function ‘f2fs_init_page_array_cache’: fs/f2fs/compress.c:1984:47: error: ‘%u’ directive writing between 1 and 7 bytes into a region of size between 5 and 8 [-Werror=format-overflow=] 1984 | sprintf(slab_name, "f2fs_page_array_entry-%u:%u", MAJOR(dev), MINOR(dev)); | ^~ String "f2fs_page_array_entry-%u:%u" can up to 35. The first "%u" can up to 4 and the second "%u" can up to 7, so total size is "24 + 4 + 7 = 35". slab_name's size should be 35 rather than 32. | |||||
| CVE-2023-52747 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Restore allocated resources on failed copyout Fix a resource leak if an error occurs. | |||||
| CVE-2023-52746 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 2.5 LOW |
| In the Linux kernel, the following vulnerability has been resolved: xfrm/compat: prevent potential spectre v1 gadget in xfrm_xlate32_attr() int type = nla_type(nla); if (type > XFRMA_MAX) { return -EOPNOTSUPP; } @type is then used as an array index and can be used as a Spectre v1 gadget. if (nla_len(nla) < compat_policy[type].len) { array_index_nospec() can be used to prevent leaking content of kernel memory to malicious users. | |||||
| CVE-2023-52744 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix potential NULL-ptr-dereference in_dev_get() can return NULL which will cause a failure once idev is dereferenced in in_dev_for_each_ifa_rtnl(). This patch adds a check for NULL value in idev beforehand. Found by Linux Verification Center (linuxtesting.org) with SVACE. | |||||
| CVE-2023-52743 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ice: Do not use WQ_MEM_RECLAIM flag for workqueue When both ice and the irdma driver are loaded, a warning in check_flush_dependency is being triggered. This is due to ice driver workqueue being allocated with the WQ_MEM_RECLAIM flag and the irdma one is not. According to kernel documentation, this flag should be set if the workqueue will be involved in the kernel's memory reclamation flow. Since it is not, there is no need for the ice driver's WQ to have this flag set so remove it. Example trace: [ +0.000004] workqueue: WQ_MEM_RECLAIM ice:ice_service_task [ice] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000139] WARNING: CPU: 0 PID: 728 at kernel/workqueue.c:2632 check_flush_dependency+0x178/0x1a0 [ +0.000011] Modules linked in: bonding tls xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_cha in_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rfkill vfat fat intel_rapl_msr intel _rapl_common isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct1 0dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_ core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_cm iw_cm iTCO_wdt iTCO_vendor_support ipmi_ssif irdma mei_me ib_uverbs ib_core intel_uncore joydev pcspkr i2c_i801 acpi_ipmi mei lpc_ich i2c_smbus intel_pch_thermal ioatdma ipmi_si acpi_power_meter acpi_pad xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ahci ixgbe libahci ice i40e igb crc32c_intel mdio i2c_algo_bit liba ta dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ +0.000161] [last unloaded: bonding] [ +0.000006] CPU: 0 PID: 728 Comm: kworker/0:2 Tainted: G S 6.2.0-rc2_next-queue-13jan-00458-gc20aabd57164 #1 [ +0.000006] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ +0.000003] Workqueue: ice ice_service_task [ice] [ +0.000127] RIP: 0010:check_flush_dependency+0x178/0x1a0 [ +0.000005] Code: 89 8e 02 01 e8 49 3d 40 00 49 8b 55 18 48 8d 8d d0 00 00 00 48 8d b3 d0 00 00 00 4d 89 e0 48 c7 c7 e0 3b 08 9f e8 bb d3 07 01 <0f> 0b e9 be fe ff ff 80 3d 24 89 8e 02 00 0f 85 6b ff ff ff e9 06 [ +0.000004] RSP: 0018:ffff88810a39f990 EFLAGS: 00010282 [ +0.000005] RAX: 0000000000000000 RBX: ffff888141bc2400 RCX: 0000000000000000 [ +0.000004] RDX: 0000000000000001 RSI: dffffc0000000000 RDI: ffffffffa1213a80 [ +0.000003] RBP: ffff888194bf3400 R08: ffffed117b306112 R09: ffffed117b306112 [ +0.000003] R10: ffff888bd983088b R11: ffffed117b306111 R12: 0000000000000000 [ +0.000003] R13: ffff888111f84d00 R14: ffff88810a3943ac R15: ffff888194bf3400 [ +0.000004] FS: 0000000000000000(0000) GS:ffff888bd9800000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000056035b208b60 CR3: 000000017795e005 CR4: 00000000007706f0 [ +0.000003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000003] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000002] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000002] <TASK> [ +0.000003] __flush_workqueue+0x203/0x840 [ +0.000006] ? mutex_unlock+0x84/0xd0 [ +0.000008] ? __pfx_mutex_unlock+0x10/0x10 [ +0.000004] ? __pfx___flush_workqueue+0x10/0x10 [ +0.000006] ? mutex_lock+0xa3/0xf0 [ +0.000005] ib_cache_cleanup_one+0x39/0x190 [ib_core] [ +0.000174] __ib_unregister_device+0x84/0xf0 [ib_core] [ +0.000094] ib_unregister_device+0x25/0x30 [ib_core] [ +0.000093] irdma_ib_unregister_device+0x97/0xc0 [irdma] [ +0.000064] ? __pfx_irdma_ib_unregister_device+0x10/0x10 [irdma] [ +0.000059] ? up_write+0x5c/0x90 [ +0.000005] irdma_remove+0x36/0x90 [irdma] [ +0.000062] auxiliary_bus_remove+0x32/0x50 [ +0.000007] device_r ---truncated--- | |||||
| CVE-2023-52742 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: USB: Fix wrong-direction WARNING in plusb.c The syzbot fuzzer detected a bug in the plusb network driver: A zero-length control-OUT transfer was treated as a read instead of a write. In modern kernels this error provokes a WARNING: usb 1-1: BOGUS control dir, pipe 80000280 doesn't match bRequestType c0 WARNING: CPU: 0 PID: 4645 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 Modules linked in: CPU: 1 PID: 4645 Comm: dhcpcd Not tainted 6.2.0-rc6-syzkaller-00050-g9f266ccaa2f5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 ... Call Trace: <TASK> usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153 __usbnet_read_cmd+0xb9/0x390 drivers/net/usb/usbnet.c:2010 usbnet_read_cmd+0x96/0xf0 drivers/net/usb/usbnet.c:2068 pl_vendor_req drivers/net/usb/plusb.c:60 [inline] pl_set_QuickLink_features drivers/net/usb/plusb.c:75 [inline] pl_reset+0x2f/0xf0 drivers/net/usb/plusb.c:85 usbnet_open+0xcc/0x5d0 drivers/net/usb/usbnet.c:889 __dev_open+0x297/0x4d0 net/core/dev.c:1417 __dev_change_flags+0x587/0x750 net/core/dev.c:8530 dev_change_flags+0x97/0x170 net/core/dev.c:8602 devinet_ioctl+0x15a2/0x1d70 net/ipv4/devinet.c:1147 inet_ioctl+0x33f/0x380 net/ipv4/af_inet.c:979 sock_do_ioctl+0xcc/0x230 net/socket.c:1169 sock_ioctl+0x1f8/0x680 net/socket.c:1286 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The fix is to call usbnet_write_cmd() instead of usbnet_read_cmd() and remove the USB_DIR_IN flag. | |||||
| CVE-2023-52740 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/64s/interrupt: Fix interrupt exit race with security mitigation switch The RFI and STF security mitigation options can flip the interrupt_exit_not_reentrant static branch condition concurrently with the interrupt exit code which tests that branch. Interrupt exit tests this condition to set MSR[EE|RI] for exit, then again in the case a soft-masked interrupt is found pending, to recover the MSR so the interrupt can be replayed before attempting to exit again. If the condition changes between these two tests, the MSR and irq soft-mask state will become corrupted, leading to warnings and possible crashes. For example, if the branch is initially true then false, MSR[EE] will be 0 but PACA_IRQ_HARD_DIS clear and EE may not get enabled, leading to warnings in irq_64.c. | |||||
| CVE-2023-52738 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.3 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/fence: Fix oops due to non-matching drm_sched init/fini Currently amdgpu calls drm_sched_fini() from the fence driver sw fini routine - such function is expected to be called only after the respective init function - drm_sched_init() - was executed successfully. Happens that we faced a driver probe failure in the Steam Deck recently, and the function drm_sched_fini() was called even without its counter-part had been previously called, causing the following oops: amdgpu: probe of 0000:04:00.0 failed with error -110 BUG: kernel NULL pointer dereference, address: 0000000000000090 PGD 0 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 609 Comm: systemd-udevd Not tainted 6.2.0-rc3-gpiccoli #338 Hardware name: Valve Jupiter/Jupiter, BIOS F7A0113 11/04/2022 RIP: 0010:drm_sched_fini+0x84/0xa0 [gpu_sched] [...] Call Trace: <TASK> amdgpu_fence_driver_sw_fini+0xc8/0xd0 [amdgpu] amdgpu_device_fini_sw+0x2b/0x3b0 [amdgpu] amdgpu_driver_release_kms+0x16/0x30 [amdgpu] devm_drm_dev_init_release+0x49/0x70 [...] To prevent that, check if the drm_sched was properly initialized for a given ring before calling its fini counter-part. Notice ideally we'd use sched.ready for that; such field is set as the latest thing on drm_sched_init(). But amdgpu seems to "override" the meaning of such field - in the above oops for example, it was a GFX ring causing the crash, and the sched.ready field was set to true in the ring init routine, regardless of the state of the DRM scheduler. Hence, we ended-up using sched.ops as per Christian's suggestion [0], and also removed the no_scheduler check [1]. [0] https://lore.kernel.org/amd-gfx/984ee981-2906-0eaf-ccec-9f80975cb136@amd.com/ [1] https://lore.kernel.org/amd-gfx/cd0e2994-f85f-d837-609f-7056d5fb7231@amd.com/ | |||||
| CVE-2023-52737 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: lock the inode in shared mode before starting fiemap Currently fiemap does not take the inode's lock (VFS lock), it only locks a file range in the inode's io tree. This however can lead to a deadlock if we have a concurrent fsync on the file and fiemap code triggers a fault when accessing the user space buffer with fiemap_fill_next_extent(). The deadlock happens on the inode's i_mmap_lock semaphore, which is taken both by fsync and btrfs_page_mkwrite(). This deadlock was recently reported by syzbot and triggers a trace like the following: task:syz-executor361 state:D stack:20264 pid:5668 ppid:5119 flags:0x00004004 Call Trace: <TASK> context_switch kernel/sched/core.c:5293 [inline] __schedule+0x995/0xe20 kernel/sched/core.c:6606 schedule+0xcb/0x190 kernel/sched/core.c:6682 wait_on_state fs/btrfs/extent-io-tree.c:707 [inline] wait_extent_bit+0x577/0x6f0 fs/btrfs/extent-io-tree.c:751 lock_extent+0x1c2/0x280 fs/btrfs/extent-io-tree.c:1742 find_lock_delalloc_range+0x4e6/0x9c0 fs/btrfs/extent_io.c:488 writepage_delalloc+0x1ef/0x540 fs/btrfs/extent_io.c:1863 __extent_writepage+0x736/0x14e0 fs/btrfs/extent_io.c:2174 extent_write_cache_pages+0x983/0x1220 fs/btrfs/extent_io.c:3091 extent_writepages+0x219/0x540 fs/btrfs/extent_io.c:3211 do_writepages+0x3c3/0x680 mm/page-writeback.c:2581 filemap_fdatawrite_wbc+0x11e/0x170 mm/filemap.c:388 __filemap_fdatawrite_range mm/filemap.c:421 [inline] filemap_fdatawrite_range+0x175/0x200 mm/filemap.c:439 btrfs_fdatawrite_range fs/btrfs/file.c:3850 [inline] start_ordered_ops fs/btrfs/file.c:1737 [inline] btrfs_sync_file+0x4ff/0x1190 fs/btrfs/file.c:1839 generic_write_sync include/linux/fs.h:2885 [inline] btrfs_do_write_iter+0xcd3/0x1280 fs/btrfs/file.c:1684 call_write_iter include/linux/fs.h:2189 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x7dc/0xc50 fs/read_write.c:584 ksys_write+0x177/0x2a0 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f7d4054e9b9 RSP: 002b:00007f7d404fa2f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f7d405d87a0 RCX: 00007f7d4054e9b9 RDX: 0000000000000090 RSI: 0000000020000000 RDI: 0000000000000006 RBP: 00007f7d405a51d0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 61635f65646f6e69 R13: 65646f7475616f6e R14: 7261637369646f6e R15: 00007f7d405d87a8 </TASK> INFO: task syz-executor361:5697 blocked for more than 145 seconds. Not tainted 6.2.0-rc3-syzkaller-00376-g7c6984405241 #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor361 state:D stack:21216 pid:5697 ppid:5119 flags:0x00004004 Call Trace: <TASK> context_switch kernel/sched/core.c:5293 [inline] __schedule+0x995/0xe20 kernel/sched/core.c:6606 schedule+0xcb/0x190 kernel/sched/core.c:6682 rwsem_down_read_slowpath+0x5f9/0x930 kernel/locking/rwsem.c:1095 __down_read_common+0x54/0x2a0 kernel/locking/rwsem.c:1260 btrfs_page_mkwrite+0x417/0xc80 fs/btrfs/inode.c:8526 do_page_mkwrite+0x19e/0x5e0 mm/memory.c:2947 wp_page_shared+0x15e/0x380 mm/memory.c:3295 handle_pte_fault mm/memory.c:4949 [inline] __handle_mm_fault mm/memory.c:5073 [inline] handle_mm_fault+0x1b79/0x26b0 mm/memory.c:5219 do_user_addr_fault+0x69b/0xcb0 arch/x86/mm/fault.c:1428 handle_page_fault arch/x86/mm/fault.c:1519 [inline] exc_page_fault+0x7a/0x110 arch/x86/mm/fault.c:1575 asm_exc_page_fault+0x22/0x30 arch/x86/include/asm/idtentry.h:570 RIP: 0010:copy_user_short_string+0xd/0x40 arch/x86/lib/copy_user_64.S:233 Code: 74 0a 89 (...) RSP: 0018:ffffc9000570f330 EFLAGS: 000502 ---truncated--- | |||||