Total
400569 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-53523 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: can: gs_usb: fix time stamp counter initialization If the gs_usb device driver is unloaded (or unbound) before the interface is shut down, the USB stack first calls the struct usb_driver::disconnect and then the struct net_device_ops::ndo_stop callback. In gs_usb_disconnect() all pending bulk URBs are killed, i.e. no more RX'ed CAN frames are send from the USB device to the host. Later in gs_can_close() a reset control message is send to each CAN channel to remove the controller from the CAN bus. In this race window the USB device can still receive CAN frames from the bus and internally queue them to be send to the host. At least in the current version of the candlelight firmware, the queue of received CAN frames is not emptied during the reset command. After loading (or binding) the gs_usb driver, new URBs are submitted during the struct net_device_ops::ndo_open callback and the candlelight firmware starts sending its already queued CAN frames to the host. However, this scenario was not considered when implementing the hardware timestamp function. The cycle counter/time counter infrastructure is set up (gs_usb_timestamp_init()) after the USBs are submitted, resulting in a NULL pointer dereference if timecounter_cyc2time() (via the call chain: gs_usb_receive_bulk_callback() -> gs_usb_set_timestamp() -> gs_usb_skb_set_timestamp()) is called too early. Move the gs_usb_timestamp_init() function before the URBs are submitted to fix this problem. For a comprehensive solution, we need to consider gs_usb devices with more than 1 channel. The cycle counter/time counter infrastructure is setup per channel, but the RX URBs are per device. Once gs_can_open() of _a_ channel has been called, and URBs have been submitted, the gs_usb_receive_bulk_callback() can be called for _all_ available channels, even for channels that are not running, yet. As cycle counter/time counter has not set up, this will again lead to a NULL pointer dereference. Convert the cycle counter/time counter from a "per channel" to a "per device" functionality. Also set it up, before submitting any URBs to the device. Further in gs_usb_receive_bulk_callback(), don't process any URBs for not started CAN channels, only resubmit the URB. | |||||
| CVE-2023-53522 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex syzbot is reporting circular locking dependency between cpu_hotplug_lock and freezer_mutex, for commit f5d39b020809 ("freezer,sched: Rewrite core freezer logic") replaced atomic_inc() in freezer_apply_state() with static_branch_inc() which holds cpu_hotplug_lock. cpu_hotplug_lock => cgroup_threadgroup_rwsem => freezer_mutex cgroup_file_write() { cgroup_procs_write() { __cgroup_procs_write() { cgroup_procs_write_start() { cgroup_attach_lock() { cpus_read_lock() { percpu_down_read(&cpu_hotplug_lock); } percpu_down_write(&cgroup_threadgroup_rwsem); } } cgroup_attach_task() { cgroup_migrate() { cgroup_migrate_execute() { freezer_attach() { mutex_lock(&freezer_mutex); (...snipped...) } } } } (...snipped...) } } } freezer_mutex => cpu_hotplug_lock cgroup_file_write() { freezer_write() { freezer_change_state() { mutex_lock(&freezer_mutex); freezer_apply_state() { static_branch_inc(&freezer_active) { static_key_slow_inc() { cpus_read_lock(); static_key_slow_inc_cpuslocked(); cpus_read_unlock(); } } } mutex_unlock(&freezer_mutex); } } } Swap locking order by moving cpus_read_lock() in freezer_apply_state() to before mutex_lock(&freezer_mutex) in freezer_change_state(). | |||||
| CVE-2023-53521 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ses: Fix slab-out-of-bounds in ses_intf_remove() A fix for: BUG: KASAN: slab-out-of-bounds in ses_intf_remove+0x23f/0x270 [ses] Read of size 8 at addr ffff88a10d32e5d8 by task rmmod/12013 When edev->components is zero, accessing edev->component[0] members is wrong. | |||||
| CVE-2023-53519 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-mem2mem: add lock to protect parameter num_rdy Getting below error when using KCSAN to check the driver. Adding lock to protect parameter num_rdy when getting the value with function: v4l2_m2m_num_src_bufs_ready/v4l2_m2m_num_dst_bufs_ready. kworker/u16:3: [name:report&]BUG: KCSAN: data-race in v4l2_m2m_buf_queue kworker/u16:3: [name:report&] kworker/u16:3: [name:report&]read-write to 0xffffff8105f35b94 of 1 bytes by task 20865 on cpu 7: kworker/u16:3: v4l2_m2m_buf_queue+0xd8/0x10c | |||||
| CVE-2023-53516 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: macvlan: add forgotten nla_policy for IFLA_MACVLAN_BC_CUTOFF The previous commit 954d1fa1ac93 ("macvlan: Add netlink attribute for broadcast cutoff") added one additional attribute named IFLA_MACVLAN_BC_CUTOFF to allow broadcast cutfoff. However, it forgot to describe the nla_policy at macvlan_policy (drivers/net/macvlan.c). Hence, this suppose NLA_S32 (4 bytes) integer can be faked as empty (0 bytes) by a malicious user, which could leads to OOB in heap just like CVE-2023-3773. To fix it, this commit just completes the nla_policy description for IFLA_MACVLAN_BC_CUTOFF. This enforces the length check and avoids the potential OOB read. | |||||
| CVE-2023-53515 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: virtio-mmio: don't break lifecycle of vm_dev vm_dev has a separate lifecycle because it has a 'struct device' embedded. Thus, having a release callback for it is correct. Allocating the vm_dev struct with devres totally breaks this protection, though. Instead of waiting for the vm_dev release callback, the memory is freed when the platform_device is removed. Resulting in a use-after-free when finally the callback is to be called. To easily see the problem, compile the kernel with CONFIG_DEBUG_KOBJECT_RELEASE and unbind with sysfs. The fix is easy, don't use devres in this case. Found during my research about object lifetime problems. | |||||
| CVE-2023-53514 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix memory leak of device names The device names allocated by dev_set_name() need be freed before module unloading, but they can not be freed because the kobject's refcount which was set in device_initialize() has not be decreased to 0. As comment of device_add() says, if it fails, use only put_device() drop the refcount, then the name will be freed in kobejct_cleanup(). device_del() and put_device() can be replaced with device_unregister(), so call it to unregister the added successfully devices, and just call put_device() to the not added device. Add a release() function to device to avoid null release() function WARNING in device_release(), it's empty, because the context devices are freed together in host1x_memory_context_list_free(). | |||||
| CVE-2023-53513 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nbd: fix incomplete validation of ioctl arg We tested and found an alarm caused by nbd_ioctl arg without verification. The UBSAN warning calltrace like below: UBSAN: Undefined behaviour in fs/buffer.c:1709:35 signed integer overflow: -9223372036854775808 - 1 cannot be represented in type 'long long int' CPU: 3 PID: 2523 Comm: syz-executor.0 Not tainted 4.19.90 #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x3f0 arch/arm64/kernel/time.c:78 show_stack+0x28/0x38 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x170/0x1dc lib/dump_stack.c:118 ubsan_epilogue+0x18/0xb4 lib/ubsan.c:161 handle_overflow+0x188/0x1dc lib/ubsan.c:192 __ubsan_handle_sub_overflow+0x34/0x44 lib/ubsan.c:206 __block_write_full_page+0x94c/0xa20 fs/buffer.c:1709 block_write_full_page+0x1f0/0x280 fs/buffer.c:2934 blkdev_writepage+0x34/0x40 fs/block_dev.c:607 __writepage+0x68/0xe8 mm/page-writeback.c:2305 write_cache_pages+0x44c/0xc70 mm/page-writeback.c:2240 generic_writepages+0xdc/0x148 mm/page-writeback.c:2329 blkdev_writepages+0x2c/0x38 fs/block_dev.c:2114 do_writepages+0xd4/0x250 mm/page-writeback.c:2344 The reason for triggering this warning is __block_write_full_page() -> i_size_read(inode) - 1 overflow. inode->i_size is assigned in __nbd_ioctl() -> nbd_set_size() -> bytesize. We think it is necessary to limit the size of arg to prevent errors. Moreover, __nbd_ioctl() -> nbd_add_socket(), arg will be cast to int. Assuming the value of arg is 0x80000000000000001) (on a 64-bit machine), it will become 1 after the coercion, which will return unexpected results. Fix it by adding checks to prevent passing in too large numbers. | |||||
| CVE-2023-53512 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Fix a memory leak Add a forgotten kfree(). | |||||
| CVE-2023-53511 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix fget leak when fs don't support nowait buffered read Heming reported a BUG when using io_uring doing link-cp on ocfs2. [1] Do the following steps can reproduce this BUG: mount -t ocfs2 /dev/vdc /mnt/ocfs2 cp testfile /mnt/ocfs2/ ./link-cp /mnt/ocfs2/testfile /mnt/ocfs2/testfile.1 umount /mnt/ocfs2 Then umount will fail, and it outputs: umount: /mnt/ocfs2: target is busy. While tracing umount, it blames mnt_get_count() not return as expected. Do a deep investigation for fget()/fput() on related code flow, I've finally found that fget() leaks since ocfs2 doesn't support nowait buffered read. io_issue_sqe |-io_assign_file // do fget() first |-io_read |-io_iter_do_read |-ocfs2_file_read_iter // return -EOPNOTSUPP |-kiocb_done |-io_rw_done |-__io_complete_rw_common // set REQ_F_REISSUE |-io_resubmit_prep |-io_req_prep_async // override req->file, leak happens This was introduced by commit a196c78b5443 in v5.18. Fix it by don't re-assign req->file if it has already been assigned. [1] https://lore.kernel.org/ocfs2-devel/ab580a75-91c8-d68a-3455-40361be1bfa8@linux.alibaba.com/T/#t | |||||
| CVE-2023-53509 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: qed: allow sleep in qed_mcp_trace_dump() By default, qed_mcp_cmd_and_union() delays 10us at a time in a loop that can run 500K times, so calls to qed_mcp_nvm_rd_cmd() may block the current thread for over 5s. We observed thread scheduling delays over 700ms in production, with stacktraces pointing to this code as the culprit. qed_mcp_trace_dump() is called from ethtool, so sleeping is permitted. It already can sleep in qed_mcp_halt(), which calls qed_mcp_cmd(). Add a "can sleep" parameter to qed_find_nvram_image() and qed_nvram_read() so they can sleep during qed_mcp_trace_dump(). qed_mcp_trace_get_meta_info() and qed_mcp_trace_read_meta(), called only by qed_mcp_trace_dump(), allow these functions to sleep. I can't tell if the other caller (qed_grc_dump_mcp_hw_dump()) can sleep, so keep b_can_sleep set to false when it calls these functions. An example stacktrace from a custom warning we added to the kernel showing a thread that has not scheduled despite long needing resched: [ 2745.362925,17] ------------[ cut here ]------------ [ 2745.362941,17] WARNING: CPU: 23 PID: 5640 at arch/x86/kernel/irq.c:233 do_IRQ+0x15e/0x1a0() [ 2745.362946,17] Thread not rescheduled for 744 ms after irq 99 [ 2745.362956,17] Modules linked in: ... [ 2745.363339,17] CPU: 23 PID: 5640 Comm: lldpd Tainted: P O 4.4.182+ #202104120910+6d1da174272d.61x [ 2745.363343,17] Hardware name: FOXCONN MercuryB/Quicksilver Controller, BIOS H11P1N09 07/08/2020 [ 2745.363346,17] 0000000000000000 ffff885ec07c3ed8 ffffffff8131eb2f ffff885ec07c3f20 [ 2745.363358,17] ffffffff81d14f64 ffff885ec07c3f10 ffffffff81072ac2 ffff88be98ed0000 [ 2745.363369,17] 0000000000000063 0000000000000174 0000000000000074 0000000000000000 [ 2745.363379,17] Call Trace: [ 2745.363382,17] <IRQ> [<ffffffff8131eb2f>] dump_stack+0x8e/0xcf [ 2745.363393,17] [<ffffffff81072ac2>] warn_slowpath_common+0x82/0xc0 [ 2745.363398,17] [<ffffffff81072b4c>] warn_slowpath_fmt+0x4c/0x50 [ 2745.363404,17] [<ffffffff810d5a8e>] ? rcu_irq_exit+0xae/0xc0 [ 2745.363408,17] [<ffffffff817c99fe>] do_IRQ+0x15e/0x1a0 [ 2745.363413,17] [<ffffffff817c7ac9>] common_interrupt+0x89/0x89 [ 2745.363416,17] <EOI> [<ffffffff8132aa74>] ? delay_tsc+0x24/0x50 [ 2745.363425,17] [<ffffffff8132aa04>] __udelay+0x34/0x40 [ 2745.363457,17] [<ffffffffa04d45ff>] qed_mcp_cmd_and_union+0x36f/0x7d0 [qed] [ 2745.363473,17] [<ffffffffa04d5ced>] qed_mcp_nvm_rd_cmd+0x4d/0x90 [qed] [ 2745.363490,17] [<ffffffffa04e1dc7>] qed_mcp_trace_dump+0x4a7/0x630 [qed] [ 2745.363504,17] [<ffffffffa04e2556>] ? qed_fw_asserts_dump+0x1d6/0x1f0 [qed] [ 2745.363520,17] [<ffffffffa04e4ea7>] qed_dbg_mcp_trace_get_dump_buf_size+0x37/0x80 [qed] [ 2745.363536,17] [<ffffffffa04ea881>] qed_dbg_feature_size+0x61/0xa0 [qed] [ 2745.363551,17] [<ffffffffa04eb427>] qed_dbg_all_data_size+0x247/0x260 [qed] [ 2745.363560,17] [<ffffffffa0482c10>] qede_get_regs_len+0x30/0x40 [qede] [ 2745.363566,17] [<ffffffff816c9783>] ethtool_get_drvinfo+0xe3/0x190 [ 2745.363570,17] [<ffffffff816cc152>] dev_ethtool+0x1362/0x2140 [ 2745.363575,17] [<ffffffff8109bcc6>] ? finish_task_switch+0x76/0x260 [ 2745.363580,17] [<ffffffff817c2116>] ? __schedule+0x3c6/0x9d0 [ 2745.363585,17] [<ffffffff810dbd50>] ? hrtimer_start_range_ns+0x1d0/0x370 [ 2745.363589,17] [<ffffffff816c1e5b>] ? dev_get_by_name_rcu+0x6b/0x90 [ 2745.363594,17] [<ffffffff816de6a8>] dev_ioctl+0xe8/0x710 [ 2745.363599,17] [<ffffffff816a58a8>] sock_do_ioctl+0x48/0x60 [ 2745.363603,17] [<ffffffff816a5d87>] sock_ioctl+0x1c7/0x280 [ 2745.363608,17] [<ffffffff8111f393>] ? seccomp_phase1+0x83/0x220 [ 2745.363612,17] [<ffffffff811e3503>] do_vfs_ioctl+0x2b3/0x4e0 [ 2745.363616,17] [<ffffffff811e3771>] SyS_ioctl+0x41/0x70 [ 2745.363619,17] [<ffffffff817c6ffe>] entry_SYSCALL_64_fastpath+0x1e/0x79 [ 2745.363622,17] ---[ end trace f6954aa440266421 ]--- | |||||
| CVE-2023-53508 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ublk: fail to start device if queue setup is interrupted In ublk_ctrl_start_dev(), if wait_for_completion_interruptible() is interrupted by signal, queues aren't setup successfully yet, so we have to fail UBLK_CMD_START_DEV, otherwise kernel oops can be triggered. Reported by German when working on qemu-storage-deamon which requires single thread ublk daemon. | |||||
| CVE-2023-53507 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Unregister devlink params in case interface is down Currently, in case an interface is down, mlx5 driver doesn't unregister its devlink params, which leads to this WARN[1]. Fix it by unregistering devlink params in that case as well. [1] [ 295.244769 ] WARNING: CPU: 15 PID: 1 at net/core/devlink.c:9042 devlink_free+0x174/0x1fc [ 295.488379 ] CPU: 15 PID: 1 Comm: shutdown Tainted: G S OE 5.15.0-1017.19.3.g0677e61-bluefield #g0677e61 [ 295.509330 ] Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS 4.2.0.12761 Jun 6 2023 [ 295.543096 ] pc : devlink_free+0x174/0x1fc [ 295.551104 ] lr : mlx5_devlink_free+0x18/0x2c [mlx5_core] [ 295.561816 ] sp : ffff80000809b850 [ 295.711155 ] Call trace: [ 295.716030 ] devlink_free+0x174/0x1fc [ 295.723346 ] mlx5_devlink_free+0x18/0x2c [mlx5_core] [ 295.733351 ] mlx5_sf_dev_remove+0x98/0xb0 [mlx5_core] [ 295.743534 ] auxiliary_bus_remove+0x2c/0x50 [ 295.751893 ] __device_release_driver+0x19c/0x280 [ 295.761120 ] device_release_driver+0x34/0x50 [ 295.769649 ] bus_remove_device+0xdc/0x170 [ 295.777656 ] device_del+0x17c/0x3a4 [ 295.784620 ] mlx5_sf_dev_remove+0x28/0xf0 [mlx5_core] [ 295.794800 ] mlx5_sf_dev_table_destroy+0x98/0x110 [mlx5_core] [ 295.806375 ] mlx5_unload+0x34/0xd0 [mlx5_core] [ 295.815339 ] mlx5_unload_one+0x70/0xe4 [mlx5_core] [ 295.824998 ] shutdown+0xb0/0xd8 [mlx5_core] [ 295.833439 ] pci_device_shutdown+0x3c/0xa0 [ 295.841651 ] device_shutdown+0x170/0x340 [ 295.849486 ] __do_sys_reboot+0x1f4/0x2a0 [ 295.857322 ] __arm64_sys_reboot+0x2c/0x40 [ 295.865329 ] invoke_syscall+0x78/0x100 [ 295.872817 ] el0_svc_common.constprop.0+0x54/0x184 [ 295.882392 ] do_el0_svc+0x30/0xac [ 295.889008 ] el0_svc+0x48/0x160 [ 295.895278 ] el0t_64_sync_handler+0xa4/0x130 [ 295.903807 ] el0t_64_sync+0x1a4/0x1a8 [ 295.911120 ] ---[ end trace 4f1d2381d00d9dce ]--- | |||||
| CVE-2023-53505 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: clk: tegra: tegra124-emc: Fix potential memory leak The tegra and tegra needs to be freed in the error handling path, otherwise it will be leaked. | |||||
| CVE-2023-53503 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: allow ext4_get_group_info() to fail Previously, ext4_get_group_info() would treat an invalid group number as BUG(), since in theory it should never happen. However, if a malicious attaker (or fuzzer) modifies the superblock via the block device while it is the file system is mounted, it is possible for s_first_data_block to get set to a very large number. In that case, when calculating the block group of some block number (such as the starting block of a preallocation region), could result in an underflow and very large block group number. Then the BUG_ON check in ext4_get_group_info() would fire, resutling in a denial of service attack that can be triggered by root or someone with write access to the block device. For a quality of implementation perspective, it's best that even if the system administrator does something that they shouldn't, that it will not trigger a BUG. So instead of BUG'ing, ext4_get_group_info() will call ext4_error and return NULL. We also add fallback code in all of the callers of ext4_get_group_info() that it might NULL. Also, since ext4_get_group_info() was already borderline to be an inline function, un-inline it. The results in a next reduction of the compiled text size of ext4 by roughly 2k. | |||||
| CVE-2023-53501 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd/iommu_v2: Fix pasid_state refcount dec hit 0 warning on pasid unbind When unbinding pasid - a race condition exists vs outstanding page faults. To prevent this, the pasid_state object contains a refcount. * set to 1 on pasid bind * incremented on each ppr notification start * decremented on each ppr notification done * decremented on pasid unbind Since refcount_dec assumes that refcount will never reach 0: the current implementation causes the following to be invoked on pasid unbind: REFCOUNT_WARN("decrement hit 0; leaking memory") Fix this issue by changing refcount_dec to refcount_dec_and_test to explicitly handle refcount=1. | |||||
| CVE-2023-53498 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential null dereference The adev->dm.dc pointer can be NULL and dereferenced in amdgpu_dm_fini() without checking. Add a NULL pointer check before calling dc_dmub_srv_destroy(). Found by Linux Verification Center (linuxtesting.org) with SVACE. | |||||
| CVE-2023-53497 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: vsp1: Replace vb2_is_streaming() with vb2_start_streaming_called() The vsp1 driver uses the vb2_is_streaming() function in its .buf_queue() handler to check if the .start_streaming() operation has been called, and decide whether to just add the buffer to an internal queue, or also trigger a hardware run. vb2_is_streaming() relies on the vb2_queue structure's streaming field, which used to be set only after calling the .start_streaming() operation. Commit a10b21532574 ("media: vb2: add (un)prepare_streaming queue ops") changed this, setting the .streaming field in vb2_core_streamon() before enqueuing buffers to the driver and calling .start_streaming(). This broke the vsp1 driver which now believes that .start_streaming() has been called when it hasn't, leading to a crash: [ 881.058705] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 [ 881.067495] Mem abort info: [ 881.070290] ESR = 0x0000000096000006 [ 881.074042] EC = 0x25: DABT (current EL), IL = 32 bits [ 881.079358] SET = 0, FnV = 0 [ 881.082414] EA = 0, S1PTW = 0 [ 881.085558] FSC = 0x06: level 2 translation fault [ 881.090439] Data abort info: [ 881.093320] ISV = 0, ISS = 0x00000006 [ 881.097157] CM = 0, WnR = 0 [ 881.100126] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004fa51000 [ 881.106573] [0000000000000020] pgd=080000004f36e003, p4d=080000004f36e003, pud=080000004f7ec003, pmd=0000000000000000 [ 881.117217] Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP [ 881.123494] Modules linked in: rcar_fdp1 v4l2_mem2mem [ 881.128572] CPU: 0 PID: 1271 Comm: yavta Tainted: G B 6.2.0-rc1-00023-g6c94e2e99343 #556 [ 881.138061] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT) [ 881.145981] pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 881.152951] pc : vsp1_dl_list_add_body+0xa8/0xe0 [ 881.157580] lr : vsp1_dl_list_add_body+0x34/0xe0 [ 881.162206] sp : ffff80000c267710 [ 881.165522] x29: ffff80000c267710 x28: ffff000010938ae8 x27: ffff000013a8dd98 [ 881.172683] x26: ffff000010938098 x25: ffff000013a8dc00 x24: ffff000010ed6ba8 [ 881.179841] x23: ffff00000faa4000 x22: 0000000000000000 x21: 0000000000000020 [ 881.186998] x20: ffff00000faa4000 x19: 0000000000000000 x18: 0000000000000000 [ 881.194154] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 881.201309] x14: 0000000000000000 x13: 746e696174206c65 x12: ffff70000157043d [ 881.208465] x11: 1ffff0000157043c x10: ffff70000157043c x9 : dfff800000000000 [ 881.215622] x8 : ffff80000ab821e7 x7 : 00008ffffea8fbc4 x6 : 0000000000000001 [ 881.222779] x5 : ffff80000ab821e0 x4 : ffff70000157043d x3 : 0000000000000020 [ 881.229936] x2 : 0000000000000020 x1 : ffff00000e4f6400 x0 : 0000000000000000 [ 881.237092] Call trace: [ 881.239542] vsp1_dl_list_add_body+0xa8/0xe0 [ 881.243822] vsp1_video_pipeline_run+0x270/0x2a0 [ 881.248449] vsp1_video_buffer_queue+0x1c0/0x1d0 [ 881.253076] __enqueue_in_driver+0xbc/0x260 [ 881.257269] vb2_start_streaming+0x48/0x200 [ 881.261461] vb2_core_streamon+0x13c/0x280 [ 881.265565] vb2_streamon+0x3c/0x90 [ 881.269064] vsp1_video_streamon+0x2fc/0x3e0 [ 881.273344] v4l_streamon+0x50/0x70 [ 881.276844] __video_do_ioctl+0x2bc/0x5d0 [ 881.280861] video_usercopy+0x2a8/0xc80 [ 881.284704] video_ioctl2+0x20/0x40 [ 881.288201] v4l2_ioctl+0xa4/0xc0 [ 881.291525] __arm64_sys_ioctl+0xe8/0x110 [ 881.295543] invoke_syscall+0x68/0x190 [ 881.299303] el0_svc_common.constprop.0+0x88/0x170 [ 881.304105] do_el0_svc+0x4c/0xf0 [ 881.307430] el0_svc+0x4c/0xa0 [ 881.310494] el0t_64_sync_handler+0xbc/0x140 [ 881.314773] el0t_64_sync+0x190/0x194 [ 881.318450] Code: d50323bf d65f03c0 91008263 f9800071 (885f7c60) [ 881.324551] ---[ end trace 0000000000000000 ]--- [ 881.329173] note: yavta[1271] exited with preempt_count 1 A different r ---truncated--- | |||||
| CVE-2023-53496 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86/platform/uv: Use alternate source for socket to node data The UV code attempts to build a set of tables to allow it to do bidirectional socket<=>node lookups. But when nr_cpus is set to a smaller number than actually present, the cpu_to_node() mapping information for unused CPUs is not available to build_socket_tables(). This results in skipping some nodes or sockets when creating the tables and leaving some -1's for later code to trip. over, causing oopses. The problem is that the socket<=>node lookups are created by doing a loop over all CPUs, then looking up the CPU's APICID and socket. But if a CPU is not present, there is no way to start this lookup. Instead of looping over all CPUs, take CPUs out of the equation entirely. Loop over all APICIDs which are mapped to a valid NUMA node. Then just extract the socket-id from the APICID. This avoid tripping over disabled CPUs. | |||||
| CVE-2023-53489 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. syzkaller reported [0] memory leaks of an UDP socket and ZEROCOPY skbs. We can reproduce the problem with these sequences: sk = socket(AF_INET, SOCK_DGRAM, 0) sk.setsockopt(SOL_SOCKET, SO_TIMESTAMPING, SOF_TIMESTAMPING_TX_SOFTWARE) sk.setsockopt(SOL_SOCKET, SO_ZEROCOPY, 1) sk.sendto(b'', MSG_ZEROCOPY, ('127.0.0.1', 53)) sk.close() sendmsg() calls msg_zerocopy_alloc(), which allocates a skb, sets skb->cb->ubuf.refcnt to 1, and calls sock_hold(). Here, struct ubuf_info_msgzc indirectly holds a refcnt of the socket. When the skb is sent, __skb_tstamp_tx() clones it and puts the clone into the socket's error queue with the TX timestamp. When the original skb is received locally, skb_copy_ubufs() calls skb_unclone(), and pskb_expand_head() increments skb->cb->ubuf.refcnt. This additional count is decremented while freeing the skb, but struct ubuf_info_msgzc still has a refcnt, so __msg_zerocopy_callback() is not called. The last refcnt is not released unless we retrieve the TX timestamped skb by recvmsg(). Since we clear the error queue in inet_sock_destruct() after the socket's refcnt reaches 0, there is a circular dependency. If we close() the socket holding such skbs, we never call sock_put() and leak the count, sk, and skb. TCP has the same problem, and commit e0c8bccd40fc ("net: stream: purge sk_error_queue in sk_stream_kill_queues()") tried to fix it by calling skb_queue_purge() during close(). However, there is a small chance that skb queued in a qdisc or device could be put into the error queue after the skb_queue_purge() call. In __skb_tstamp_tx(), the cloned skb should not have a reference to the ubuf to remove the circular dependency, but skb_clone() does not call skb_copy_ubufs() for zerocopy skb. So, we need to call skb_orphan_frags_rx() for the cloned skb to call skb_copy_ubufs(). [0]: BUG: memory leak unreferenced object 0xffff88800c6d2d00 (size 1152): comm "syz-executor392", pid 264, jiffies 4294785440 (age 13.044s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 cd af e8 81 00 00 00 00 ................ 02 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<0000000055636812>] sk_prot_alloc+0x64/0x2a0 net/core/sock.c:2024 [<0000000054d77b7a>] sk_alloc+0x3b/0x800 net/core/sock.c:2083 [<0000000066f3c7e0>] inet_create net/ipv4/af_inet.c:319 [inline] [<0000000066f3c7e0>] inet_create+0x31e/0xe40 net/ipv4/af_inet.c:245 [<000000009b83af97>] __sock_create+0x2ab/0x550 net/socket.c:1515 [<00000000b9b11231>] sock_create net/socket.c:1566 [inline] [<00000000b9b11231>] __sys_socket_create net/socket.c:1603 [inline] [<00000000b9b11231>] __sys_socket_create net/socket.c:1588 [inline] [<00000000b9b11231>] __sys_socket+0x138/0x250 net/socket.c:1636 [<000000004fb45142>] __do_sys_socket net/socket.c:1649 [inline] [<000000004fb45142>] __se_sys_socket net/socket.c:1647 [inline] [<000000004fb45142>] __x64_sys_socket+0x73/0xb0 net/socket.c:1647 [<0000000066999e0e>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<0000000066999e0e>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 [<0000000017f238c1>] entry_SYSCALL_64_after_hwframe+0x63/0xcd BUG: memory leak unreferenced object 0xffff888017633a00 (size 240): comm "syz-executor392", pid 264, jiffies 4294785440 (age 13.044s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 2d 6d 0c 80 88 ff ff .........-m..... backtrace: [<000000002b1c4368>] __alloc_skb+0x229/0x320 net/core/skbuff.c:497 [<00000000143579a6>] alloc_skb include/linux/skbuff.h:1265 [inline] [<00000000143579a6>] sock_omalloc+0xaa/0x190 net/core/sock.c:2596 [<00000000be626478>] msg_zerocopy_alloc net/core/skbuff.c:1294 [inline] [<00000000be626478>] ---truncated--- | |||||