Total
400526 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-53724 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: mfd: pcf50633-adc: Fix potential memleak in pcf50633_adc_async_read() `req` is allocated in pcf50633_adc_async_read(), but adc_enqueue_request() could fail to insert the `req` into queue. We need to check the return value and free it in the case of failure. | |||||
| CVE-2023-53723 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: disable sdma ecc irq only when sdma RAS is enabled in suspend sdma_v4_0_ip is shared on a few asics, but in sdma_v4_0_hw_fini, driver unconditionally disables ecc_irq which is only enabled on those asics enabling sdma ecc. This will introduce a warning in suspend cycle on those chips with sdma ip v4.0, while without sdma ecc. So this patch correct this. [ 7283.166354] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu] [ 7283.167001] RSP: 0018:ffff9a5fc3967d08 EFLAGS: 00010246 [ 7283.167019] RAX: ffff98d88afd3770 RBX: 0000000000000001 RCX: 0000000000000000 [ 7283.167023] RDX: 0000000000000000 RSI: ffff98d89da30390 RDI: ffff98d89da20000 [ 7283.167025] RBP: ffff98d89da20000 R08: 0000000000036838 R09: 0000000000000006 [ 7283.167028] R10: ffffd5764243c008 R11: 0000000000000000 R12: ffff98d89da30390 [ 7283.167030] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105 [ 7283.167032] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000 [ 7283.167036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7283.167039] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0 [ 7283.167041] Call Trace: [ 7283.167046] <TASK> [ 7283.167048] sdma_v4_0_hw_fini+0x38/0xa0 [amdgpu] [ 7283.167704] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu] [ 7283.168296] amdgpu_device_suspend+0x103/0x180 [amdgpu] [ 7283.168875] amdgpu_pmops_freeze+0x21/0x60 [amdgpu] [ 7283.169464] pci_pm_freeze+0x54/0xc0 | |||||
| CVE-2023-53722 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: md: raid1: fix potential OOB in raid1_remove_disk() If rddev->raid_disk is greater than mddev->raid_disks, there will be an out-of-bounds in raid1_remove_disk(). We have already found similar reports as follows: 1) commit d17f744e883b ("md-raid10: fix KASAN warning") 2) commit 1ebc2cec0b7d ("dm raid: fix KASAN warning in raid5_remove_disk") Fix this bug by checking whether the "number" variable is valid. | |||||
| CVE-2023-53721 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: Fix a NULL pointer dereference in ath12k_mac_op_hw_scan() In ath12k_mac_op_hw_scan(), the return value of kzalloc() is directly used in memcpy(), which may lead to a NULL pointer dereference on failure of kzalloc(). Fix this bug by adding a check of arg.extraie.ptr. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 | |||||
| CVE-2023-53720 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Release the label when replacing existing ct entry Cited commit doesn't release the label mapping when replacing existing ct entry which leads to following memleak report: unreferenced object 0xffff8881854cf280 (size 96): comm "kworker/u48:74", pid 23093, jiffies 4296664564 (age 175.944s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000002722d368>] __kmalloc+0x4b/0x1c0 [<00000000cc44e18f>] mapping_add+0x6e8/0xc90 [mlx5_core] [<000000003ad942a7>] mlx5_get_label_mapping+0x66/0xe0 [mlx5_core] [<00000000266308ac>] mlx5_tc_ct_entry_create_mod_hdr+0x1c4/0xf50 [mlx5_core] [<000000009a768b4f>] mlx5_tc_ct_entry_add_rule+0x16f/0xaf0 [mlx5_core] [<00000000a178f3e5>] mlx5_tc_ct_block_flow_offload_add+0x10cb/0x1f90 [mlx5_core] [<000000007b46c496>] mlx5_tc_ct_block_flow_offload+0x14a/0x630 [mlx5_core] [<00000000a9a18ac5>] nf_flow_offload_tuple+0x1a3/0x390 [nf_flow_table] [<00000000d0881951>] flow_offload_work_handler+0x257/0xd30 [nf_flow_table] [<000000009e4935a4>] process_one_work+0x7c2/0x13e0 [<00000000f5cd36a7>] worker_thread+0x59d/0xec0 [<00000000baed1daf>] kthread+0x28f/0x330 [<0000000063d282a4>] ret_from_fork+0x1f/0x30 Fix the issue by correctly releasing the label mapping. | |||||
| CVE-2023-53719 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: serial: arc_uart: fix of_iomap leak in `arc_serial_probe` Smatch reports: drivers/tty/serial/arc_uart.c:631 arc_serial_probe() warn: 'port->membase' from of_iomap() not released on lines: 631. In arc_serial_probe(), if uart_add_one_port() fails, port->membase is not released, which would cause a resource leak. To fix this, I replace of_iomap with devm_platform_ioremap_resource. | |||||
| CVE-2023-53717 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback() Fix a stack-out-of-bounds write that occurs in a WMI response callback function that is called after a timeout occurs in ath9k_wmi_cmd(). The callback writes to wmi->cmd_rsp_buf, a stack-allocated buffer that could no longer be valid when a timeout occurs. Set wmi->last_seq_id to 0 when a timeout occurred. Found by a modified version of syzkaller. BUG: KASAN: stack-out-of-bounds in ath9k_wmi_ctrl_rx Write of size 4 Call Trace: memcpy ath9k_wmi_ctrl_rx ath9k_htc_rx_msg ath9k_hif_usb_reg_in_cb __usb_hcd_giveback_urb usb_hcd_giveback_urb dummy_timer call_timer_fn run_timer_softirq __do_softirq irq_exit_rcu sysvec_apic_timer_interrupt | |||||
| CVE-2023-53716 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net: fix skb leak in __skb_tstamp_tx() Commit 50749f2dd685 ("tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp.") added a call to skb_orphan_frags_rx() to fix leaks with zerocopy skbs. But it ended up adding a leak of its own. When skb_orphan_frags_rx() fails, the function just returns, leaking the skb it just cloned. Free it before returning. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. | |||||
| CVE-2023-53715 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cfg80211: Pass the PMK in binary instead of hex Apparently the hex passphrase mechanism does not work on newer chips/firmware (e.g. BCM4387). It seems there was a simple way of passing it in binary all along, so use that and avoid the hexification. OpenBSD has been doing it like this from the beginning, so this should work on all chips. Also clear the structure before setting the PMK. This was leaking uninitialized stack contents to the device. | |||||
| CVE-2023-53714 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/stm: ltdc: fix late dereference check In ltdc_crtc_set_crc_source(), struct drm_crtc was dereferenced in a container_of() before the pointer check. This could cause a kernel panic. Fix this smatch warning: drivers/gpu/drm/stm/ltdc.c:1124 ltdc_crtc_set_crc_source() warn: variable dereferenced before check 'crtc' (see line 1119) | |||||
| CVE-2023-53712 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9317/1: kexec: Make smp stop calls asynchronous If a panic is triggered by a hrtimer interrupt all online cpus will be notified and set offline. But as highlighted by commit 19dbdcb8039c ("smp: Warn on function calls from softirq context") this call should not be made synchronous with disabled interrupts: softdog: Initiating panic Kernel panic - not syncing: Software Watchdog Timer expired WARNING: CPU: 1 PID: 0 at kernel/smp.c:753 smp_call_function_many_cond unwind_backtrace: show_stack dump_stack_lvl __warn warn_slowpath_fmt smp_call_function_many_cond smp_call_function crash_smp_send_stop.part.0 machine_crash_shutdown __crash_kexec panic softdog_fire __hrtimer_run_queues hrtimer_interrupt Make the smp call for machine_crash_nonpanic_core() asynchronous. | |||||
| CVE-2023-53710 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read Kernel NULL pointer dereference when ACPI SAR table isn't implemented well. Fix the error code of return to mark the ACPI SAR table as invalid. [ 5.077128] mt7921e 0000:06:00.0: sar cnt = 0 [ 5.077381] BUG: kernel NULL pointer dereference, address: 0000000000000004 [ 5.077630] #PF: supervisor read access in kernel mode [ 5.077883] #PF: error_code(0x0000) - not-present page [ 5.078138] PGD 0 P4D 0 [ 5.078398] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 5.079202] RIP: 0010:mt7921_init_acpi_sar+0x106/0x220 [mt7921_common] ... [ 5.080786] Call Trace: [ 5.080786] <TASK> [ 5.080786] mt7921_register_device+0x37d/0x490 [mt7921_common] [ 5.080786] mt7921_pci_probe.part.0+0x2ee/0x310 [mt7921e] [ 5.080786] mt7921_pci_probe+0x52/0x70 [mt7921e] [ 5.080786] local_pci_probe+0x47/0x90 [ 5.080786] pci_call_probe+0x55/0x190 [ 5.080786] pci_device_probe+0x84/0x120 | |||||
| CVE-2023-53709 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Handle race between rb_move_tail and rb_check_pages It seems a data race between ring_buffer writing and integrity check. That is, RB_FLAG of head_page is been updating, while at same time RB_FLAG was cleared when doing integrity check rb_check_pages(): rb_check_pages() rb_handle_head_page(): -------- -------- rb_head_page_deactivate() rb_head_page_set_normal() rb_head_page_activate() We do intergrity test of the list to check if the list is corrupted and it is still worth doing it. So, let's refactor rb_check_pages() such that we no longer clear and set flag during the list sanity checking. [1] and [2] are the test to reproduce and the crash report respectively. 1: ``` read_trace.sh while true; do # the "trace" file is closed after read head -1 /sys/kernel/tracing/trace > /dev/null done ``` ``` repro.sh sysctl -w kernel.panic_on_warn=1 # function tracer will writing enough data into ring_buffer echo function > /sys/kernel/tracing/current_tracer ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ./read_trace.sh & ``` 2: ------------[ cut here ]------------ WARNING: CPU: 9 PID: 62 at kernel/trace/ring_buffer.c:2653 rb_move_tail+0x450/0x470 Modules linked in: CPU: 9 PID: 62 Comm: ksoftirqd/9 Tainted: G W 6.2.0-rc6+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 RIP: 0010:rb_move_tail+0x450/0x470 Code: ff ff 4c 89 c8 f0 4d 0f b1 02 48 89 c2 48 83 e2 fc 49 39 d0 75 24 83 e0 03 83 f8 02 0f 84 e1 fb ff ff 48 8b 57 10 f0 ff 42 08 <0f> 0b 83 f8 02 0f 84 ce fb ff ff e9 db RSP: 0018:ffffb5564089bd00 EFLAGS: 00000203 RAX: 0000000000000000 RBX: ffff9db385a2bf81 RCX: ffffb5564089bd18 RDX: ffff9db281110100 RSI: 0000000000000fe4 RDI: ffff9db380145400 RBP: ffff9db385a2bf80 R08: ffff9db385a2bfc0 R09: ffff9db385a2bfc2 R10: ffff9db385a6c000 R11: ffff9db385a2bf80 R12: 0000000000000000 R13: 00000000000003e8 R14: ffff9db281110100 R15: ffffffffbb006108 FS: 0000000000000000(0000) GS:ffff9db3bdcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005602323024c8 CR3: 0000000022e0c000 CR4: 00000000000006e0 Call Trace: <TASK> ring_buffer_lock_reserve+0x136/0x360 ? __do_softirq+0x287/0x2df ? __pfx_rcu_softirq_qs+0x10/0x10 trace_function+0x21/0x110 ? __pfx_rcu_softirq_qs+0x10/0x10 ? __do_softirq+0x287/0x2df function_trace_call+0xf6/0x120 0xffffffffc038f097 ? rcu_softirq_qs+0x5/0x140 rcu_softirq_qs+0x5/0x140 __do_softirq+0x287/0x2df run_ksoftirqd+0x2a/0x30 smpboot_thread_fn+0x188/0x220 ? __pfx_smpboot_thread_fn+0x10/0x10 kthread+0xe7/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> ---[ end trace 0000000000000000 ]--- [ crash report and test reproducer credit goes to Zheng Yejian] | |||||
| CVE-2023-53708 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects If a badly constructed firmware includes multiple `ACPI_TYPE_PACKAGE` objects while evaluating the AMD LPS0 _DSM, there will be a memory leak. Explicitly guard against this. | |||||
| CVE-2023-53704 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: clk: imx: clk-imx8mp: improve error handling in imx8mp_clocks_probe() Replace of_iomap() and kzalloc() with devm_of_iomap() and devm_kzalloc() which can automatically release the related memory when the device or driver is removed or unloaded to avoid potential memory leak. In this case, iounmap(anatop_base) in line 427,433 are removed as manual release is not required. Besides, referring to clk-imx8mq.c, check the return code of of_clk_add_hw_provider, if it returns negtive, print error info and unregister hws, which makes the program more robust. | |||||
| CVE-2023-53703 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: HID: amd_sfh: Fix for shift-out-of-bounds Shift operation of 'exp' and 'shift' variables exceeds the maximum number of shift values in the u32 range leading to UBSAN shift-out-of-bounds. ... [ 6.120512] UBSAN: shift-out-of-bounds in drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c:149:50 [ 6.120598] shift exponent 104 is too large for 64-bit type 'long unsigned int' [ 6.120659] CPU: 4 PID: 96 Comm: kworker/4:1 Not tainted 6.4.0amd_1-next-20230519-dirty #10 [ 6.120665] Hardware name: AMD Birman-PHX/Birman-PHX, BIOS SFH_with_HPD_SEN.FD 04/05/2023 [ 6.120667] Workqueue: events amd_sfh_work_buffer [amd_sfh] [ 6.120687] Call Trace: [ 6.120690] <TASK> [ 6.120694] dump_stack_lvl+0x48/0x70 [ 6.120704] dump_stack+0x10/0x20 [ 6.120707] ubsan_epilogue+0x9/0x40 [ 6.120716] __ubsan_handle_shift_out_of_bounds+0x10f/0x170 [ 6.120720] ? psi_group_change+0x25f/0x4b0 [ 6.120729] float_to_int.cold+0x18/0xba [amd_sfh] [ 6.120739] get_input_rep+0x57/0x340 [amd_sfh] [ 6.120748] ? __schedule+0xba7/0x1b60 [ 6.120756] ? __pfx_get_input_rep+0x10/0x10 [amd_sfh] [ 6.120764] amd_sfh_work_buffer+0x91/0x180 [amd_sfh] [ 6.120772] process_one_work+0x229/0x430 [ 6.120780] worker_thread+0x4a/0x3c0 [ 6.120784] ? __pfx_worker_thread+0x10/0x10 [ 6.120788] kthread+0xf7/0x130 [ 6.120792] ? __pfx_kthread+0x10/0x10 [ 6.120795] ret_from_fork+0x29/0x50 [ 6.120804] </TASK> ... Fix this by adding the condition to validate shift ranges. | |||||
| CVE-2023-53702 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: s390/crypto: use vector instructions only if available for ChaCha20 Commit 349d03ffd5f6 ("crypto: s390 - add crypto library interface for ChaCha20") added a library interface to the s390 specific ChaCha20 implementation. However no check was added to verify if the required facilities are installed before branching into the assembler code. If compiled into the kernel, this will lead to the following crash, if vector instructions are not available: data exception: 0007 ilc:3 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7+ #11 Hardware name: IBM 3931 A01 704 (KVM/Linux) Krnl PSW : 0704e00180000000 000000001857277a (chacha20_vx+0x32/0x818) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000037f0000000a ffffffffffffff60 000000008184b000 0000000019f5c8e6 0000000000000109 0000037fffb13c58 0000037fffb13c78 0000000019bb1780 0000037fffb13c58 0000000019f5c8e6 000000008184b000 0000000000000109 00000000802d8000 0000000000000109 0000000018571ebc 0000037fffb13718 Krnl Code: 000000001857276a: c07000b1f80b larl %r7,0000000019bb1780 0000000018572770: a708000a lhi %r0,10 #0000000018572774: e78950000c36 vlm %v24,%v25,0(%r5),0 >000000001857277a: e7a060000806 vl %v26,0(%r6),0 0000000018572780: e7bf70004c36 vlm %v27,%v31,0(%r7),4 0000000018572786: e70b00000456 vlr %v0,%v27 000000001857278c: e71800000456 vlr %v1,%v24 0000000018572792: e74b00000456 vlr %v4,%v27 Call Trace: [<000000001857277a>] chacha20_vx+0x32/0x818 Last Breaking-Event-Address: [<0000000018571eb6>] chacha20_crypt_s390.constprop.0+0x6e/0xd8 ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Fix this by adding a missing MACHINE_HAS_VX check. [agordeev@linux.ibm.com: remove duplicates in commit message] | |||||
| CVE-2023-53700 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: media: max9286: Fix memleak in max9286_v4l2_register() There is a kmemleak when testing the media/i2c/max9286.c with bpf mock device: kmemleak: 5 new suspected memory leaks (see /sys/kernel/debug/kmemleak) unreferenced object 0xffff88810defc400 (size 256): comm "python3", pid 278, jiffies 4294737563 (age 31.978s) hex dump (first 32 bytes): 28 06 a7 0a 81 88 ff ff 00 fe 22 12 81 88 ff ff (........."..... 10 c4 ef 0d 81 88 ff ff 10 c4 ef 0d 81 88 ff ff ................ backtrace: [<00000000191de6a7>] __kmalloc_node+0x44/0x1b0 [<000000002f4912b7>] kvmalloc_node+0x34/0x180 [<0000000057dc4cae>] v4l2_ctrl_new+0x325/0x10f0 [videodev] [<0000000026030272>] v4l2_ctrl_new_std+0x16f/0x210 [videodev] [<00000000f0d9ea2f>] max9286_probe+0x76e/0xbff [max9286] [<00000000ea8f6455>] i2c_device_probe+0x28d/0x680 [<0000000087529af3>] really_probe+0x17c/0x3f0 [<00000000b08be526>] __driver_probe_device+0xe3/0x170 [<000000004382edea>] driver_probe_device+0x49/0x120 [<000000007bde528a>] __device_attach_driver+0xf7/0x150 [<000000009f9c6ab4>] bus_for_each_drv+0x114/0x180 [<00000000c8aaf588>] __device_attach+0x1e5/0x2d0 [<0000000041cc06b9>] bus_probe_device+0x126/0x140 [<000000002309860d>] device_add+0x810/0x1130 [<000000002827bf98>] i2c_new_client_device+0x359/0x4f0 [<00000000593bdc85>] of_i2c_register_device+0xf1/0x110 max9286_v4l2_register() calls v4l2_ctrl_new_std(), but won't free the created v412_ctrl when fwnode_graph_get_endpoint_by_id() failed, which causes the memleak. Call v4l2_ctrl_handler_free() to free the v412_ctrl. | |||||
| CVE-2023-53699 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: riscv: move memblock_allow_resize() after linear mapping is ready The initial memblock metadata is accessed from kernel image mapping. The regions arrays need to "reallocated" from memblock and accessed through linear mapping to cover more memblock regions. So the resizing should not be allowed until linear mapping is ready. Note that there are memblock allocations when building linear mapping. This patch is similar to 24cc61d8cb5a ("arm64: memblock: don't permit memblock resizing until linear mapping is up"). In following log, many memblock regions are reserved before create_linear_mapping_page_table(). And then it triggered reallocation of memblock.reserved.regions and memcpy the old array in kernel image mapping to the new array in linear mapping which caused a page fault. [ 0.000000] memblock_reserve: [0x00000000bf01f000-0x00000000bf01ffff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf021000-0x00000000bf021fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf023000-0x00000000bf023fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf025000-0x00000000bf025fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf027000-0x00000000bf027fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf029000-0x00000000bf029fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf02b000-0x00000000bf02bfff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf02d000-0x00000000bf02dfff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf02f000-0x00000000bf02ffff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] memblock_reserve: [0x00000000bf030000-0x00000000bf030fff] early_init_fdt_scan_reserved_mem+0x28c/0x2c6 [ 0.000000] OF: reserved mem: 0x0000000080000000..0x000000008007ffff (512 KiB) map non-reusable mmode_resv0@80000000 [ 0.000000] memblock_reserve: [0x00000000bf000000-0x00000000bf001fed] paging_init+0x19a/0x5ae [ 0.000000] memblock_phys_alloc_range: 4096 bytes align=0x1000 from=0x0000000000000000 max_addr=0x0000000000000000 alloc_pmd_fixmap+0x14/0x1c [ 0.000000] memblock_reserve: [0x000000017ffff000-0x000000017fffffff] memblock_alloc_range_nid+0xb8/0x128 [ 0.000000] memblock: reserved is doubled to 256 at [0x000000017fffd000-0x000000017fffe7ff] [ 0.000000] Unable to handle kernel paging request at virtual address ff600000ffffd000 [ 0.000000] Oops [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.4.0-rc1-00011-g99a670b2069c #66 [ 0.000000] Hardware name: riscv-virtio,qemu (DT) [ 0.000000] epc : __memcpy+0x60/0xf8 [ 0.000000] ra : memblock_double_array+0x192/0x248 [ 0.000000] epc : ffffffff8081d214 ra : ffffffff80a3dfc0 sp : ffffffff81403bd0 [ 0.000000] gp : ffffffff814fbb38 tp : ffffffff8140dac0 t0 : 0000000001600000 [ 0.000000] t1 : 0000000000000000 t2 : 000000008f001000 s0 : ffffffff81403c60 [ 0.000000] s1 : ffffffff80c0bc98 a0 : ff600000ffffd000 a1 : ffffffff80c0bcd8 [ 0.000000] a2 : 0000000000000c00 a3 : ffffffff80c0c8d8 a4 : 0000000080000000 [ 0.000000] a5 : 0000000000080000 a6 : 0000000000000000 a7 : 0000000080200000 [ 0.000000] s2 : ff600000ffffd000 s3 : 0000000000002000 s4 : 0000000000000c00 [ 0.000000] s5 : ffffffff80c0bc60 s6 : ffffffff80c0bcc8 s7 : 0000000000000000 [ 0.000000] s8 : ffffffff814fd0a8 s9 : 000000017fffe7ff s10: 0000000000000000 [ 0.000000] s11: 0000000000001000 t3 : 0000000000001000 t4 : 0000000000000000 [ 0.000000] t5 : 000000008f003000 t6 : ff600000ffffd000 [ 0.000000] status: 0000000200000100 badaddr: ff600000ffffd000 cause: 000000000000000f [ 0.000000] [<fff ---truncated--- | |||||
| CVE-2023-53697 | 2026-06-17 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: nvdimm: Fix memleak of pmu attr_groups in unregister_nvdimm_pmu() Memory pointed by 'nd_pmu->pmu.attr_groups' is allocated in function 'register_nvdimm_pmu' and is lost after 'kfree(nd_pmu)' call in function 'unregister_nvdimm_pmu'. | |||||