Filtered by vendor Linux
Subscribe
Total
19806 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-50085 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: dm raid: fix address sanitizer warning in raid_resume There is a KASAN warning in raid_resume when running the lvm test lvconvert-raid.sh. The reason for the warning is that mddev->raid_disks is greater than rs->raid_disks, so the loop touches one entry beyond the allocated length. | |||||
| CVE-2022-50084 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: dm raid: fix address sanitizer warning in raid_status There is this warning when using a kernel with the address sanitizer and running this testsuite: https://gitlab.com/cki-project/kernel-tests/-/tree/main/storage/swraid/scsi_raid ================================================================== BUG: KASAN: slab-out-of-bounds in raid_status+0x1747/0x2820 [dm_raid] Read of size 4 at addr ffff888079d2c7e8 by task lvcreate/13319 CPU: 0 PID: 13319 Comm: lvcreate Not tainted 5.18.0-0.rc3.<snip> #1 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: <TASK> dump_stack_lvl+0x6a/0x9c print_address_description.constprop.0+0x1f/0x1e0 print_report.cold+0x55/0x244 kasan_report+0xc9/0x100 raid_status+0x1747/0x2820 [dm_raid] dm_ima_measure_on_table_load+0x4b8/0xca0 [dm_mod] table_load+0x35c/0x630 [dm_mod] ctl_ioctl+0x411/0x630 [dm_mod] dm_ctl_ioctl+0xa/0x10 [dm_mod] __x64_sys_ioctl+0x12a/0x1a0 do_syscall_64+0x5b/0x80 The warning is caused by reading conf->max_nr_stripes in raid_status. The code in raid_status reads mddev->private, casts it to struct r5conf and reads the entry max_nr_stripes. However, if we have different raid type than 4/5/6, mddev->private doesn't point to struct r5conf; it may point to struct r0conf, struct r1conf, struct r10conf or struct mpconf. If we cast a pointer to one of these structs to struct r5conf, we will be reading invalid memory and KASAN warns about it. Fix this bug by reading struct r5conf only if raid type is 4, 5 or 6. | |||||
| CVE-2022-50078 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing/eprobes: Do not allow eprobes to use $stack, or % for regs While playing with event probes (eprobes), I tried to see what would happen if I attempted to retrieve the instruction pointer (%rip) knowing that event probes do not use pt_regs. The result was: BUG: kernel NULL pointer dereference, address: 0000000000000024 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 1847 Comm: trace-cmd Not tainted 5.19.0-rc5-test+ #309 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:get_event_field.isra.0+0x0/0x50 Code: ff 48 c7 c7 c0 8f 74 a1 e8 3d 8b f5 ff e8 88 09 f6 ff 4c 89 e7 e8 50 6a 13 00 48 89 ef 5b 5d 41 5c 41 5d e9 42 6a 13 00 66 90 <48> 63 47 24 8b 57 2c 48 01 c6 8b 47 28 83 f8 02 74 0e 83 f8 04 74 RSP: 0018:ffff916c394bbaf0 EFLAGS: 00010086 RAX: ffff916c854041d8 RBX: ffff916c8d9fbf50 RCX: ffff916c255d2000 RDX: 0000000000000000 RSI: ffff916c255d2008 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff916c3a2a0c08 R09: ffff916c394bbda8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff916c854041d8 R13: ffff916c854041b0 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff916c9ea40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000024 CR3: 000000011b60a002 CR4: 00000000001706e0 Call Trace: <TASK> get_eprobe_size+0xb4/0x640 ? __mod_node_page_state+0x72/0xc0 __eprobe_trace_func+0x59/0x1a0 ? __mod_lruvec_page_state+0xaa/0x1b0 ? page_remove_file_rmap+0x14/0x230 ? page_remove_rmap+0xda/0x170 event_triggers_call+0x52/0xe0 trace_event_buffer_commit+0x18f/0x240 trace_event_raw_event_sched_wakeup_template+0x7a/0xb0 try_to_wake_up+0x260/0x4c0 __wake_up_common+0x80/0x180 __wake_up_common_lock+0x7c/0xc0 do_notify_parent+0x1c9/0x2a0 exit_notify+0x1a9/0x220 do_exit+0x2ba/0x450 do_group_exit+0x2d/0x90 __x64_sys_exit_group+0x14/0x20 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Obviously this is not the desired result. Move the testing for TPARG_FL_TPOINT which is only used for event probes to the top of the "$" variable check, as all the other variables are not used for event probes. Also add a check in the register parsing "%" to fail if an event probe is used. | |||||
| CVE-2022-50077 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix reference count leak in aa_pivotroot() The aa_pivotroot() function has a reference counting bug in a specific path. When aa_replace_current_label() returns on success, the function forgets to decrement the reference count of “target”, which is increased earlier by build_pivotroot(), causing a reference leak. Fix it by decreasing the refcount of “target” in that path. | |||||
| CVE-2022-50075 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing/eprobes: Have event probes be consistent with kprobes and uprobes Currently, if a symbol "@" is attempted to be used with an event probe (eprobes), it will cause a NULL pointer dereference crash. Both kprobes and uprobes can reference data other than the main registers. Such as immediate address, symbols and the current task name. Have eprobes do the same thing. For "comm", if "comm" is used and the event being attached to does not have the "comm" field, then make it the "$comm" that kprobes has. This is consistent to the way histograms and filters work. | |||||
| CVE-2022-50074 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix memleak in aa_simple_write_to_buffer() When copy_from_user failed, the memory is freed by kvfree. however the management struct and data blob are allocated independently, so only kvfree(data) cause a memleak issue here. Use aa_put_loaddata(data) to fix this issue. | |||||
| CVE-2022-50069 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: BPF: Fix potential bad pointer dereference in bpf_sys_bpf() The bpf_sys_bpf() helper function allows an eBPF program to load another eBPF program from within the kernel. In this case the argument union bpf_attr pointer (as well as the insns and license pointers inside) is a kernel address instead of a userspace address (which is the case of a usual bpf() syscall). To make the memory copying process in the syscall work in both cases, bpfptr_t was introduced to wrap around the pointer and distinguish its origin. Specifically, when copying memory contents from a bpfptr_t, a copy_from_user() is performed in case of a userspace address and a memcpy() is performed for a kernel address. This can lead to problems because the in-kernel pointer is never checked for validity. The problem happens when an eBPF syscall program tries to call bpf_sys_bpf() to load a program but provides a bad insns pointer -- say 0xdeadbeef -- in the bpf_attr union. The helper calls __sys_bpf() which would then call bpf_prog_load() to load the program. bpf_prog_load() is responsible for copying the eBPF instructions to the newly allocated memory for the program; it creates a kernel bpfptr_t for insns and invokes copy_from_bpfptr(). Internally, all bpfptr_t operations are backed by the corresponding sockptr_t operations, which performs direct memcpy() on kernel pointers for copy_from/strncpy_from operations. Therefore, the code is always happy to dereference the bad pointer to trigger a un-handle-able page fault and in turn an oops. However, this is not supposed to happen because at that point the eBPF program is already verified and should not cause a memory error. Sample KASAN trace: [ 25.685056][ T228] ================================================================== [ 25.685680][ T228] BUG: KASAN: user-memory-access in copy_from_bpfptr+0x21/0x30 [ 25.686210][ T228] Read of size 80 at addr 00000000deadbeef by task poc/228 [ 25.686732][ T228] [ 25.686893][ T228] CPU: 3 PID: 228 Comm: poc Not tainted 5.19.0-rc7 #7 [ 25.687375][ T228] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS d55cb5a 04/01/2014 [ 25.687991][ T228] Call Trace: [ 25.688223][ T228] <TASK> [ 25.688429][ T228] dump_stack_lvl+0x73/0x9e [ 25.688747][ T228] print_report+0xea/0x200 [ 25.689061][ T228] ? copy_from_bpfptr+0x21/0x30 [ 25.689401][ T228] ? _printk+0x54/0x6e [ 25.689693][ T228] ? _raw_spin_lock_irqsave+0x70/0xd0 [ 25.690071][ T228] ? copy_from_bpfptr+0x21/0x30 [ 25.690412][ T228] kasan_report+0xb5/0xe0 [ 25.690716][ T228] ? copy_from_bpfptr+0x21/0x30 [ 25.691059][ T228] kasan_check_range+0x2bd/0x2e0 [ 25.691405][ T228] ? copy_from_bpfptr+0x21/0x30 [ 25.691734][ T228] memcpy+0x25/0x60 [ 25.692000][ T228] copy_from_bpfptr+0x21/0x30 [ 25.692328][ T228] bpf_prog_load+0x604/0x9e0 [ 25.692653][ T228] ? cap_capable+0xb4/0xe0 [ 25.692956][ T228] ? security_capable+0x4f/0x70 [ 25.693324][ T228] __sys_bpf+0x3af/0x580 [ 25.693635][ T228] bpf_sys_bpf+0x45/0x240 [ 25.693937][ T228] bpf_prog_f0ec79a5a3caca46_bpf_func1+0xa2/0xbd [ 25.694394][ T228] bpf_prog_run_pin_on_cpu+0x2f/0xb0 [ 25.694756][ T228] bpf_prog_test_run_syscall+0x146/0x1c0 [ 25.695144][ T228] bpf_prog_test_run+0x172/0x190 [ 25.695487][ T228] __sys_bpf+0x2c5/0x580 [ 25.695776][ T228] __x64_sys_bpf+0x3a/0x50 [ 25.696084][ T228] do_syscall_64+0x60/0x90 [ 25.696393][ T228] ? fpregs_assert_state_consistent+0x50/0x60 [ 25.696815][ T228] ? exit_to_user_mode_prepare+0x36/0xa0 [ 25.697202][ T228] ? syscall_exit_to_user_mode+0x20/0x40 [ 25.697586][ T228] ? do_syscall_64+0x6e/0x90 [ 25.697899][ T228] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 25.698312][ T228] RIP: 0033:0x7f6d543fb759 [ 25.698624][ T228] Code: 08 5b 89 e8 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d ---truncated--- | |||||
| CVE-2022-50068 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Fix dummy res NULL ptr deref bug Check the bo->resource value before accessing the resource mem_type. v2: Fix commit description unwrapped warning <log snip> [ 40.191227][ T184] general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN PTI [ 40.192995][ T184] KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] [ 40.194411][ T184] CPU: 1 PID: 184 Comm: systemd-udevd Not tainted 5.19.0-rc4-00721-gb297c22b7070 #1 [ 40.196063][ T184] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014 [ 40.199605][ T184] RIP: 0010:ttm_bo_validate+0x1b3/0x240 [ttm] [ 40.200754][ T184] Code: e8 72 c5 ff ff 83 f8 b8 74 d4 85 c0 75 54 49 8b 9e 58 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 10 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 04 3c 03 7e 44 8b 53 10 31 c0 85 d2 0f 85 58 [ 40.203685][ T184] RSP: 0018:ffffc900006df0c8 EFLAGS: 00010202 [ 40.204630][ T184] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 1ffff1102f4bb71b [ 40.205864][ T184] RDX: 0000000000000002 RSI: ffffc900006df208 RDI: 0000000000000010 [ 40.207102][ T184] RBP: 1ffff920000dbe1a R08: ffffc900006df208 R09: 0000000000000000 [ 40.208394][ T184] R10: ffff88817a5f0000 R11: 0000000000000001 R12: ffffc900006df110 [ 40.209692][ T184] R13: ffffc900006df0f0 R14: ffff88817a5db800 R15: ffffc900006df208 [ 40.210862][ T184] FS: 00007f6b1d16e8c0(0000) GS:ffff88839d700000(0000) knlGS:0000000000000000 [ 40.212250][ T184] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 40.213275][ T184] CR2: 000055a1001d4ff0 CR3: 00000001700f4000 CR4: 00000000000006e0 [ 40.214469][ T184] Call Trace: [ 40.214974][ T184] <TASK> [ 40.215438][ T184] ? ttm_bo_bounce_temp_buffer+0x140/0x140 [ttm] [ 40.216572][ T184] ? mutex_spin_on_owner+0x240/0x240 [ 40.217456][ T184] ? drm_vma_offset_add+0xaa/0x100 [drm] [ 40.218457][ T184] ttm_bo_init_reserved+0x3d6/0x540 [ttm] [ 40.219410][ T184] ? shmem_get_inode+0x744/0x980 [ 40.220231][ T184] ttm_bo_init_validate+0xb1/0x200 [ttm] [ 40.221172][ T184] ? bo_driver_evict_flags+0x340/0x340 [drm_vram_helper] [ 40.222530][ T184] ? ttm_bo_init_reserved+0x540/0x540 [ttm] [ 40.223643][ T184] ? __do_sys_finit_module+0x11a/0x1c0 [ 40.224654][ T184] ? __shmem_file_setup+0x102/0x280 [ 40.234764][ T184] drm_gem_vram_create+0x305/0x480 [drm_vram_helper] [ 40.235766][ T184] ? bo_driver_evict_flags+0x340/0x340 [drm_vram_helper] [ 40.236846][ T184] ? __kasan_slab_free+0x108/0x180 [ 40.237650][ T184] drm_gem_vram_fill_create_dumb+0x134/0x340 [drm_vram_helper] [ 40.238864][ T184] ? local_pci_probe+0xdf/0x180 [ 40.239674][ T184] ? drmm_vram_helper_init+0x400/0x400 [drm_vram_helper] [ 40.240826][ T184] drm_client_framebuffer_create+0x19c/0x400 [drm] [ 40.241955][ T184] ? drm_client_buffer_delete+0x200/0x200 [drm] [ 40.243001][ T184] ? drm_client_pick_crtcs+0x554/0xb80 [drm] [ 40.244030][ T184] drm_fb_helper_generic_probe+0x23f/0x940 [drm_kms_helper] [ 40.245226][ T184] ? __cond_resched+0x1c/0xc0 [ 40.245987][ T184] ? drm_fb_helper_memory_range_to_clip+0x180/0x180 [drm_kms_helper] [ 40.247316][ T184] ? mutex_unlock+0x80/0x100 [ 40.248005][ T184] ? __mutex_unlock_slowpath+0x2c0/0x2c0 [ 40.249083][ T184] drm_fb_helper_single_fb_probe+0x907/0xf00 [drm_kms_helper] [ 40.250314][ T184] ? drm_fb_helper_check_var+0x1180/0x1180 [drm_kms_helper] [ 40.251540][ T184] ? __cond_resched+0x1c/0xc0 [ 40.252321][ T184] ? mutex_lock+0x9f/0x100 [ 40.253062][ T184] __drm_fb_helper_initial_config_and_unlock+0xb9/0x2c0 [drm_kms_helper] [ 40.254394][ T184] drm_fbdev_client_hotplug+0x56f/0x840 [drm_kms_helper] [ 40.255477][ T184] drm_fbdev_generic_setup+0x165/0x3c0 [drm_kms_helper] [ 40.256607][ T184] bochs_pci_probe+0x6b7/0x900 [bochs] [ ---truncated--- | |||||
| CVE-2022-50067 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: unset reloc control if transaction commit fails in prepare_to_relocate() In btrfs_relocate_block_group(), the rc is allocated. Then btrfs_relocate_block_group() calls relocate_block_group() prepare_to_relocate() set_reloc_control() that assigns rc to the variable fs_info->reloc_ctl. When prepare_to_relocate() returns, it calls btrfs_commit_transaction() btrfs_start_dirty_block_groups() btrfs_alloc_path() kmem_cache_zalloc() which may fail for example (or other errors could happen). When the failure occurs, btrfs_relocate_block_group() detects the error and frees rc and doesn't set fs_info->reloc_ctl to NULL. After that, in btrfs_init_reloc_root(), rc is retrieved from fs_info->reloc_ctl and then used, which may cause a use-after-free bug. This possible bug can be triggered by calling btrfs_ioctl_balance() before calling btrfs_ioctl_defrag(). To fix this possible bug, in prepare_to_relocate(), check if btrfs_commit_transaction() fails. If the failure occurs, unset_reloc_control() is called to set fs_info->reloc_ctl to NULL. The error log in our fault-injection testing is shown as follows: [ 58.751070] BUG: KASAN: use-after-free in btrfs_init_reloc_root+0x7ca/0x920 [btrfs] ... [ 58.753577] Call Trace: ... [ 58.755800] kasan_report+0x45/0x60 [ 58.756066] btrfs_init_reloc_root+0x7ca/0x920 [btrfs] [ 58.757304] record_root_in_trans+0x792/0xa10 [btrfs] [ 58.757748] btrfs_record_root_in_trans+0x463/0x4f0 [btrfs] [ 58.758231] start_transaction+0x896/0x2950 [btrfs] [ 58.758661] btrfs_defrag_root+0x250/0xc00 [btrfs] [ 58.759083] btrfs_ioctl_defrag+0x467/0xa00 [btrfs] [ 58.759513] btrfs_ioctl+0x3c95/0x114e0 [btrfs] ... [ 58.768510] Allocated by task 23683: [ 58.768777] ____kasan_kmalloc+0xb5/0xf0 [ 58.769069] __kmalloc+0x227/0x3d0 [ 58.769325] alloc_reloc_control+0x10a/0x3d0 [btrfs] [ 58.769755] btrfs_relocate_block_group+0x7aa/0x1e20 [btrfs] [ 58.770228] btrfs_relocate_chunk+0xf1/0x760 [btrfs] [ 58.770655] __btrfs_balance+0x1326/0x1f10 [btrfs] [ 58.771071] btrfs_balance+0x3150/0x3d30 [btrfs] [ 58.771472] btrfs_ioctl_balance+0xd84/0x1410 [btrfs] [ 58.771902] btrfs_ioctl+0x4caa/0x114e0 [btrfs] ... [ 58.773337] Freed by task 23683: ... [ 58.774815] kfree+0xda/0x2b0 [ 58.775038] free_reloc_control+0x1d6/0x220 [btrfs] [ 58.775465] btrfs_relocate_block_group+0x115c/0x1e20 [btrfs] [ 58.775944] btrfs_relocate_chunk+0xf1/0x760 [btrfs] [ 58.776369] __btrfs_balance+0x1326/0x1f10 [btrfs] [ 58.776784] btrfs_balance+0x3150/0x3d30 [btrfs] [ 58.777185] btrfs_ioctl_balance+0xd84/0x1410 [btrfs] [ 58.777621] btrfs_ioctl+0x4caa/0x114e0 [btrfs] ... | |||||
| CVE-2022-50063 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: dsa: felix: suppress non-changes to the tagging protocol The way in which dsa_tree_change_tag_proto() works is that when dsa_tree_notify() fails, it doesn't know whether the operation failed mid way in a multi-switch tree, or it failed for a single-switch tree. So even though drivers need to fail cleanly in ds->ops->change_tag_protocol(), DSA will still call dsa_tree_notify() again, to restore the old tag protocol for potential switches in the tree where the change did succeeed (before failing for others). This means for the felix driver that if we report an error in felix_change_tag_protocol(), we'll get another call where proto_ops == old_proto_ops. If we proceed to act upon that, we may do unexpected things. For example, we will call dsa_tag_8021q_register() twice in a row, without any dsa_tag_8021q_unregister() in between. Then we will actually call dsa_tag_8021q_unregister() via old_proto_ops->teardown, which (if it manages to run at all, after walking through corrupted data structures) will leave the ports inoperational anyway. The bug can be readily reproduced if we force an error while in tag_8021q mode; this crashes the kernel. echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging echo edsa > /sys/class/net/eno2/dsa/tagging # -EPROTONOSUPPORT Unable to handle kernel NULL pointer dereference at virtual address 0000000000000014 Call trace: vcap_entry_get+0x24/0x124 ocelot_vcap_filter_del+0x198/0x270 felix_tag_8021q_vlan_del+0xd4/0x21c dsa_switch_tag_8021q_vlan_del+0x168/0x2cc dsa_switch_event+0x68/0x1170 dsa_tree_notify+0x14/0x34 dsa_port_tag_8021q_vlan_del+0x84/0x110 dsa_tag_8021q_unregister+0x15c/0x1c0 felix_tag_8021q_teardown+0x16c/0x180 felix_change_tag_protocol+0x1bc/0x230 dsa_switch_event+0x14c/0x1170 dsa_tree_change_tag_proto+0x118/0x1c0 | |||||
| CVE-2022-50061 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: nomadik: Fix refcount leak in nmk_pinctrl_dt_subnode_to_map of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak." | |||||
| CVE-2022-50058 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: vdpa_sim_blk: set number of address spaces and virtqueue groups Commit bda324fd037a ("vdpasim: control virtqueue support") added two new fields (nas, ngroups) to vdpasim_dev_attr, but we forgot to initialize them for vdpa_sim_blk. When creating a new vdpa_sim_blk device this causes the kernel to panic in this way: $ vdpa dev add mgmtdev vdpasim_blk name blk0 BUG: kernel NULL pointer dereference, address: 0000000000000030 ... RIP: 0010:vhost_iotlb_add_range_ctx+0x41/0x220 [vhost_iotlb] ... Call Trace: <TASK> vhost_iotlb_add_range+0x11/0x800 [vhost_iotlb] vdpasim_map_range+0x91/0xd0 [vdpa_sim] vdpasim_alloc_coherent+0x56/0x90 [vdpa_sim] ... This happens because vdpasim->iommu[0] is not initialized when dev_attr.nas is 0. Let's fix this issue by initializing both (nas, ngroups) to 1 for vdpa_sim_blk. | |||||
| CVE-2022-50057 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix NULL deref in ntfs_update_mftmirr If ntfs_fill_super() wasn't called then sbi->sb will be equal to NULL. Code should check this ptr before dereferencing. Syzbot hit this issue via passing wrong mount param as can be seen from log below Fail log: ntfs3: Unknown parameter 'iochvrset' general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 1 PID: 3589 Comm: syz-executor210 Not tainted 5.18.0-rc3-syzkaller-00016-gb253435746d9 #0 ... Call Trace: <TASK> put_ntfs+0x1ed/0x2a0 fs/ntfs3/super.c:463 ntfs_fs_free+0x6a/0xe0 fs/ntfs3/super.c:1363 put_fs_context+0x119/0x7a0 fs/fs_context.c:469 do_new_mount+0x2b4/0xad0 fs/namespace.c:3044 do_mount fs/namespace.c:3383 [inline] __do_sys_mount fs/namespace.c:3591 [inline] | |||||
| CVE-2022-50056 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix missing i_op in ntfs_read_mft There is null pointer dereference because i_op == NULL. The bug happens because we don't initialize i_op for records in $Extend. | |||||
| CVE-2022-50055 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iavf: Fix adminq error handling iavf_alloc_asq_bufs/iavf_alloc_arq_bufs allocates with dma_alloc_coherent memory for VF mailbox. Free DMA regions for both ASQ and ARQ in case error happens during configuration of ASQ/ARQ registers. Without this change it is possible to see when unloading interface: 74626.583369: dma_debug_device_change: device driver has pending DMA allocations while released from device [count=32] One of leaked entries details: [device address=0x0000000b27ff9000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent] | |||||
| CVE-2022-50054 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iavf: Fix NULL pointer dereference in iavf_get_link_ksettings Fix possible NULL pointer dereference, due to freeing of adapter->vf_res in iavf_init_get_resources. Previous commit introduced a regression, where receiving IAVF_ERR_ADMIN_QUEUE_NO_WORK from iavf_get_vf_config would free adapter->vf_res. However, netdev is still registered, so ethtool_ops can be called. Calling iavf_get_link_ksettings with no vf_res, will result with: [ 9385.242676] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 9385.242683] #PF: supervisor read access in kernel mode [ 9385.242686] #PF: error_code(0x0000) - not-present page [ 9385.242690] PGD 0 P4D 0 [ 9385.242696] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [ 9385.242701] CPU: 6 PID: 3217 Comm: pmdalinux Kdump: loaded Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1 [ 9385.242708] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019 [ 9385.242710] RIP: 0010:iavf_get_link_ksettings+0x29/0xd0 [iavf] [ 9385.242745] Code: 00 0f 1f 44 00 00 b8 01 ef ff ff 48 c7 46 30 00 00 00 00 48 c7 46 38 00 00 00 00 c6 46 0b 00 66 89 46 08 48 8b 87 68 0e 00 00 <f6> 40 08 80 75 50 8b 87 5c 0e 00 00 83 f8 08 74 7a 76 1d 83 f8 20 [ 9385.242749] RSP: 0018:ffffc0560ec7fbd0 EFLAGS: 00010246 [ 9385.242755] RAX: 0000000000000000 RBX: ffffc0560ec7fc08 RCX: 0000000000000000 [ 9385.242759] RDX: ffffffffc0ad4550 RSI: ffffc0560ec7fc08 RDI: ffffa0fc66674000 [ 9385.242762] RBP: 00007ffd1fb2bf50 R08: b6a2d54b892363ee R09: ffffa101dc14fb00 [ 9385.242765] R10: 0000000000000000 R11: 0000000000000004 R12: ffffa0fc66674000 [ 9385.242768] R13: 0000000000000000 R14: ffffa0fc66674000 R15: 00000000ffffffa1 [ 9385.242771] FS: 00007f93711a2980(0000) GS:ffffa0fad72c0000(0000) knlGS:0000000000000000 [ 9385.242775] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9385.242778] CR2: 0000000000000008 CR3: 0000000a8e61c003 CR4: 00000000003706e0 [ 9385.242781] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 9385.242784] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 9385.242787] Call Trace: [ 9385.242791] <TASK> [ 9385.242793] ethtool_get_settings+0x71/0x1a0 [ 9385.242814] __dev_ethtool+0x426/0x2f40 [ 9385.242823] ? slab_post_alloc_hook+0x4f/0x280 [ 9385.242836] ? kmem_cache_alloc_trace+0x15d/0x2f0 [ 9385.242841] ? dev_ethtool+0x59/0x170 [ 9385.242848] dev_ethtool+0xa7/0x170 [ 9385.242856] dev_ioctl+0xc3/0x520 [ 9385.242866] sock_do_ioctl+0xa0/0xe0 [ 9385.242877] sock_ioctl+0x22f/0x320 [ 9385.242885] __x64_sys_ioctl+0x84/0xc0 [ 9385.242896] do_syscall_64+0x3a/0x80 [ 9385.242904] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 9385.242918] RIP: 0033:0x7f93702396db [ 9385.242923] Code: 73 01 c3 48 8b 0d ad 57 38 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 57 38 00 f7 d8 64 89 01 48 [ 9385.242927] RSP: 002b:00007ffd1fb2bf18 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 9385.242932] RAX: ffffffffffffffda RBX: 000055671b1d2fe0 RCX: 00007f93702396db [ 9385.242935] RDX: 00007ffd1fb2bf20 RSI: 0000000000008946 RDI: 0000000000000007 [ 9385.242937] RBP: 00007ffd1fb2bf20 R08: 0000000000000003 R09: 0030763066307330 [ 9385.242940] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd1fb2bf80 [ 9385.242942] R13: 0000000000000007 R14: 0000556719f6de90 R15: 00007ffd1fb2c1b0 [ 9385.242948] </TASK> [ 9385.242949] Modules linked in: iavf(E) xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nft_compat nf_nat_tftp nft_objref nf_conntrack_tftp bridge stp llc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables rfkill nfnetlink vfat fat irdma ib_uverbs ib_core intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretem ---truncated--- | |||||
| CVE-2022-50053 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iavf: Fix reset error handling Do not call iavf_close in iavf_reset_task error handling. Doing so can lead to double call of napi_disable, which can lead to deadlock there. Removing VF would lead to iavf_remove task being stuck, because it requires crit_lock, which is held by iavf_close. Call iavf_disable_vf if reset fail, so that driver will clean up remaining invalid resources. During rapid VF resets, HW can fail to setup VF mailbox. Wrong error handling can lead to iavf_remove being stuck with: [ 5218.999087] iavf 0000:82:01.0: Failed to init adminq: -53 ... [ 5267.189211] INFO: task repro.sh:11219 blocked for more than 30 seconds. [ 5267.189520] Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1 [ 5267.189764] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 5267.190062] task:repro.sh state:D stack: 0 pid:11219 ppid: 8162 flags:0x00000000 [ 5267.190347] Call Trace: [ 5267.190647] <TASK> [ 5267.190927] __schedule+0x460/0x9f0 [ 5267.191264] schedule+0x44/0xb0 [ 5267.191563] schedule_preempt_disabled+0x14/0x20 [ 5267.191890] __mutex_lock.isra.12+0x6e3/0xac0 [ 5267.192237] ? iavf_remove+0xf9/0x6c0 [iavf] [ 5267.192565] iavf_remove+0x12a/0x6c0 [iavf] [ 5267.192911] ? _raw_spin_unlock_irqrestore+0x1e/0x40 [ 5267.193285] pci_device_remove+0x36/0xb0 [ 5267.193619] device_release_driver_internal+0xc1/0x150 [ 5267.193974] pci_stop_bus_device+0x69/0x90 [ 5267.194361] pci_stop_and_remove_bus_device+0xe/0x20 [ 5267.194735] pci_iov_remove_virtfn+0xba/0x120 [ 5267.195130] sriov_disable+0x2f/0xe0 [ 5267.195506] ice_free_vfs+0x7d/0x2f0 [ice] [ 5267.196056] ? pci_get_device+0x4f/0x70 [ 5267.196496] ice_sriov_configure+0x78/0x1a0 [ice] [ 5267.196995] sriov_numvfs_store+0xfe/0x140 [ 5267.197466] kernfs_fop_write_iter+0x12e/0x1c0 [ 5267.197918] new_sync_write+0x10c/0x190 [ 5267.198404] vfs_write+0x24e/0x2d0 [ 5267.198886] ksys_write+0x5c/0xd0 [ 5267.199367] do_syscall_64+0x3a/0x80 [ 5267.199827] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 5267.200317] RIP: 0033:0x7f5b381205c8 [ 5267.200814] RSP: 002b:00007fff8c7e8c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 5267.201981] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f5b381205c8 [ 5267.202620] RDX: 0000000000000002 RSI: 00005569420ee900 RDI: 0000000000000001 [ 5267.203426] RBP: 00005569420ee900 R08: 000000000000000a R09: 00007f5b38180820 [ 5267.204327] R10: 000000000000000a R11: 0000000000000246 R12: 00007f5b383c06e0 [ 5267.205193] R13: 0000000000000002 R14: 00007f5b383bb880 R15: 0000000000000002 [ 5267.206041] </TASK> [ 5267.206970] Kernel panic - not syncing: hung_task: blocked tasks [ 5267.207809] CPU: 48 PID: 551 Comm: khungtaskd Kdump: loaded Tainted: G S E 5.18.0-04958-ga54ce3703613-dirty #1 [ 5267.208726] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.11.0 11/02/2019 [ 5267.209623] Call Trace: [ 5267.210569] <TASK> [ 5267.211480] dump_stack_lvl+0x33/0x42 [ 5267.212472] panic+0x107/0x294 [ 5267.213467] watchdog.cold.8+0xc/0xbb [ 5267.214413] ? proc_dohung_task_timeout_secs+0x30/0x30 [ 5267.215511] kthread+0xf4/0x120 [ 5267.216459] ? kthread_complete_and_exit+0x20/0x20 [ 5267.217505] ret_from_fork+0x22/0x30 [ 5267.218459] </TASK> | |||||
| CVE-2022-50052 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix potential buffer overflow by snprintf() snprintf() returns the would-be-filled size when the string overflows the given buffer size, hence using this value may result in a buffer overflow (although it's unrealistic). This patch replaces it with a safer version, scnprintf() for papering over such a potential issue. | |||||
| CVE-2022-50050 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda: Fix potential buffer overflow by snprintf() snprintf() returns the would-be-filled size when the string overflows the given buffer size, hence using this value may result in the buffer overflow (although it's unrealistic). This patch replaces with a safer version, scnprintf() for papering over such a potential issue. | |||||
| CVE-2022-50049 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: DPCM: Don't pick up BE without substream When DPCM tries to add valid BE connections at dpcm_add_paths(), it doesn't check whether the picked BE actually supports for the given stream direction. Due to that, when an asymmetric BE stream is present, it picks up wrongly and this may result in a NULL dereference at a later point where the code assumes the existence of a corresponding BE substream. This patch adds the check for the presence of the substream for the target BE for avoiding the problem above. Note that we have already some fix for non-existing BE substream at commit 6246f283d5e0 ("ASoC: dpcm: skip missing substream while applying symmetry"). But the code path we've hit recently is rather happening before the previous fix. So this patch tries to fix at picking up a BE instead of parsing BE lists. | |||||