Total
19304 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-49577 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: udp: Fix a data-race around sysctl_udp_l3mdev_accept. While reading sysctl_udp_l3mdev_accept, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. | |||||
| CVE-2022-49576 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: Fix data-races around sysctl_fib_multipath_hash_fields. While reading sysctl_fib_multipath_hash_fields, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. | |||||
| CVE-2022-49575 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix a data-race around sysctl_tcp_thin_linear_timeouts. While reading sysctl_tcp_thin_linear_timeouts, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. | |||||
| CVE-2022-49574 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix data-races around sysctl_tcp_recovery. While reading sysctl_tcp_recovery, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. | |||||
| CVE-2022-49573 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix a data-race around sysctl_tcp_early_retrans. While reading sysctl_tcp_early_retrans, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. | |||||
| CVE-2022-49572 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix data-races around sysctl_tcp_slow_start_after_idle. While reading sysctl_tcp_slow_start_after_idle, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. | |||||
| CVE-2022-49571 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Fix data-races around sysctl_tcp_max_reordering. While reading sysctl_tcp_max_reordering, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. | |||||
| CVE-2022-49570 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: gpio: gpio-xilinx: Fix integer overflow Current implementation is not able to configure more than 32 pins due to incorrect data type. So type casting with unsigned long to avoid it. | |||||
| CVE-2022-49569 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA transfers In case a IRQ based transfer times out the bcm2835_spi_handle_err() function is called. Since commit 1513ceee70f2 ("spi: bcm2835: Drop dma_pending flag") the TX and RX DMA transfers are unconditionally canceled, leading to NULL pointer derefs if ctlr->dma_tx or ctlr->dma_rx are not set. Fix the NULL pointer deref by checking that ctlr->dma_tx and ctlr->dma_rx are valid pointers before accessing them. | |||||
| CVE-2022-49568 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: Don't null dereference ops->destroy A KVM device cleanup happens in either of two callbacks: 1) destroy() which is called when the VM is being destroyed; 2) release() which is called when a device fd is closed. Most KVM devices use 1) but Book3s's interrupt controller KVM devices (XICS, XIVE, XIVE-native) use 2) as they need to close and reopen during the machine execution. The error handling in kvm_ioctl_create_device() assumes destroy() is always defined which leads to NULL dereference as discovered by Syzkaller. This adds a checks for destroy!=NULL and adds a missing release(). This is not changing kvm_destroy_devices() as devices with defined release() should have been removed from the KVM devices list by then. | |||||
| CVE-2022-49567 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix uninit-value in mpol_rebind_policy() mpol_set_nodemask()(mm/mempolicy.c) does not set up nodemask when pol->mode is MPOL_LOCAL. Check pol->mode before access pol->w.cpuset_mems_allowed in mpol_rebind_policy()(mm/mempolicy.c). BUG: KMSAN: uninit-value in mpol_rebind_policy mm/mempolicy.c:352 [inline] BUG: KMSAN: uninit-value in mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368 mpol_rebind_policy mm/mempolicy.c:352 [inline] mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368 cpuset_change_task_nodemask kernel/cgroup/cpuset.c:1711 [inline] cpuset_attach+0x787/0x15e0 kernel/cgroup/cpuset.c:2278 cgroup_migrate_execute+0x1023/0x1d20 kernel/cgroup/cgroup.c:2515 cgroup_migrate kernel/cgroup/cgroup.c:2771 [inline] cgroup_attach_task+0x540/0x8b0 kernel/cgroup/cgroup.c:2804 __cgroup1_procs_write+0x5cc/0x7a0 kernel/cgroup/cgroup-v1.c:520 cgroup1_tasks_write+0x94/0xb0 kernel/cgroup/cgroup-v1.c:539 cgroup_file_write+0x4c2/0x9e0 kernel/cgroup/cgroup.c:3852 kernfs_fop_write_iter+0x66a/0x9f0 fs/kernfs/file.c:296 call_write_iter include/linux/fs.h:2162 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0x1318/0x2030 fs/read_write.c:590 ksys_write+0x28b/0x510 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0xdb/0x120 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] slab_alloc mm/slub.c:3259 [inline] kmem_cache_alloc+0x902/0x11c0 mm/slub.c:3264 mpol_new mm/mempolicy.c:293 [inline] do_set_mempolicy+0x421/0xb70 mm/mempolicy.c:853 kernel_set_mempolicy mm/mempolicy.c:1504 [inline] __do_sys_set_mempolicy mm/mempolicy.c:1510 [inline] __se_sys_set_mempolicy+0x44c/0xb60 mm/mempolicy.c:1507 __x64_sys_set_mempolicy+0xd8/0x110 mm/mempolicy.c:1507 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae KMSAN: uninit-value in mpol_rebind_task (2) https://syzkaller.appspot.com/bug?id=d6eb90f952c2a5de9ea718a1b873c55cb13b59dc This patch seems to fix below bug too. KMSAN: uninit-value in mpol_rebind_mm (2) https://syzkaller.appspot.com/bug?id=f2fecd0d7013f54ec4162f60743a2b28df40926b The uninit-value is pol->w.cpuset_mems_allowed in mpol_rebind_policy(). When syzkaller reproducer runs to the beginning of mpol_new(), mpol_new() mm/mempolicy.c do_mbind() mm/mempolicy.c kernel_mbind() mm/mempolicy.c `mode` is 1(MPOL_PREFERRED), nodes_empty(*nodes) is `true` and `flags` is 0. Then mode = MPOL_LOCAL; ... policy->mode = mode; policy->flags = flags; will be executed. So in mpol_set_nodemask(), mpol_set_nodemask() mm/mempolicy.c do_mbind() kernel_mbind() pol->mode is 4 (MPOL_LOCAL), that `nodemask` in `pol` is not initialized, which will be accessed in mpol_rebind_policy(). | |||||
| CVE-2022-49566 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix memory leak in RSA When an RSA key represented in form 2 (as defined in PKCS #1 V2.1) is used, some components of the private key persist even after the TFM is released. Replace the explicit calls to free the buffers in qat_rsa_exit_tfm() with a call to qat_rsa_clear_ctx() which frees all buffers referenced in the TFM context. | |||||
| CVE-2022-49565 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/lbr: Fix unchecked MSR access error on HSW The fuzzer triggers the below trace. [ 7763.384369] unchecked MSR access error: WRMSR to 0x689 (tried to write 0x1fffffff8101349e) at rIP: 0xffffffff810704a4 (native_write_msr+0x4/0x20) [ 7763.397420] Call Trace: [ 7763.399881] <TASK> [ 7763.401994] intel_pmu_lbr_restore+0x9a/0x1f0 [ 7763.406363] intel_pmu_lbr_sched_task+0x91/0x1c0 [ 7763.410992] __perf_event_task_sched_in+0x1cd/0x240 On a machine with the LBR format LBR_FORMAT_EIP_FLAGS2, when the TSX is disabled, a TSX quirk is required to access LBR from registers. The lbr_from_signext_quirk_needed() is introduced to determine whether the TSX quirk should be applied. However, the lbr_from_signext_quirk_needed() is invoked before the intel_pmu_lbr_init(), which parses the LBR format information. Without the correct LBR format information, the TSX quirk never be applied. Move the lbr_from_signext_quirk_needed() into the intel_pmu_lbr_init(). Checking x86_pmu.lbr_has_tsx in the lbr_from_signext_quirk_needed() is not required anymore. Both LBR_FORMAT_EIP_FLAGS2 and LBR_FORMAT_INFO have LBR_TSX flag, but only the LBR_FORMAT_EIP_FLAGS2 requirs the quirk. Update the comments accordingly. | |||||
| CVE-2022-49559 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Drop WARNs that assert a triple fault never "escapes" from L2 Remove WARNs that sanity check that KVM never lets a triple fault for L2 escape and incorrectly end up in L1. In normal operation, the sanity check is perfectly valid, but it incorrectly assumes that it's impossible for userspace to induce KVM_REQ_TRIPLE_FAULT without bouncing through KVM_RUN (which guarantees kvm_check_nested_state() will see and handle the triple fault). The WARN can currently be triggered if userspace injects a machine check while L2 is active and CR4.MCE=0. And a future fix to allow save/restore of KVM_REQ_TRIPLE_FAULT, e.g. so that a synthesized triple fault isn't lost on migration, will make it trivially easy for userspace to trigger the WARN. Clearing KVM_REQ_TRIPLE_FAULT when forcibly leaving guest mode is tempting, but wrong, especially if/when the request is saved/restored, e.g. if userspace restores events (including a triple fault) and then restores nested state (which may forcibly leave guest mode). Ignoring the fact that KVM doesn't currently provide the necessary APIs, it's userspace's responsibility to manage pending events during save/restore. ------------[ cut here ]------------ WARNING: CPU: 7 PID: 1399 at arch/x86/kvm/vmx/nested.c:4522 nested_vmx_vmexit+0x7fe/0xd90 [kvm_intel] Modules linked in: kvm_intel kvm irqbypass CPU: 7 PID: 1399 Comm: state_test Not tainted 5.17.0-rc3+ #808 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:nested_vmx_vmexit+0x7fe/0xd90 [kvm_intel] Call Trace: <TASK> vmx_leave_nested+0x30/0x40 [kvm_intel] vmx_set_nested_state+0xca/0x3e0 [kvm_intel] kvm_arch_vcpu_ioctl+0xf49/0x13e0 [kvm] kvm_vcpu_ioctl+0x4b9/0x660 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> ---[ end trace 0000000000000000 ]--- | |||||
| CVE-2022-49558 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: double hook unregistration in netns path __nft_release_hooks() is called from pre_netns exit path which unregisters the hooks, then the NETDEV_UNREGISTER event is triggered which unregisters the hooks again. [ 565.221461] WARNING: CPU: 18 PID: 193 at net/netfilter/core.c:495 __nf_unregister_net_hook+0x247/0x270 [...] [ 565.246890] CPU: 18 PID: 193 Comm: kworker/u64:1 Tainted: G E 5.18.0-rc7+ #27 [ 565.253682] Workqueue: netns cleanup_net [ 565.257059] RIP: 0010:__nf_unregister_net_hook+0x247/0x270 [...] [ 565.297120] Call Trace: [ 565.300900] <TASK> [ 565.304683] nf_tables_flowtable_event+0x16a/0x220 [nf_tables] [ 565.308518] raw_notifier_call_chain+0x63/0x80 [ 565.312386] unregister_netdevice_many+0x54f/0xb50 Unregister and destroy netdev hook from netns pre_exit via kfree_rcu so the NETDEV_UNREGISTER path see unregistered hooks. | |||||
| CVE-2022-49556 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak For some sev ioctl interfaces, the length parameter that is passed maybe less than or equal to SEV_FW_BLOB_MAX_SIZE, but larger than the data that PSP firmware returns. In this case, kmalloc will allocate memory that is the size of the input rather than the size of the data. Since PSP firmware doesn't fully overwrite the allocated buffer, these sev ioctl interface may return uninitialized kernel slab memory. | |||||
| CVE-2022-49552 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix combination of jit blinding and pointers to bpf subprogs. The combination of jit blinding and pointers to bpf subprogs causes: [ 36.989548] BUG: unable to handle page fault for address: 0000000100000001 [ 36.990342] #PF: supervisor instruction fetch in kernel mode [ 36.990968] #PF: error_code(0x0010) - not-present page [ 36.994859] RIP: 0010:0x100000001 [ 36.995209] Code: Unable to access opcode bytes at RIP 0xffffffd7. [ 37.004091] Call Trace: [ 37.004351] <TASK> [ 37.004576] ? bpf_loop+0x4d/0x70 [ 37.004932] ? bpf_prog_3899083f75e4c5de_F+0xe3/0x13b The jit blinding logic didn't recognize that ld_imm64 with an address of bpf subprogram is a special instruction and proceeded to randomize it. By itself it wouldn't have been an issue, but jit_subprogs() logic relies on two step process to JIT all subprogs and then JIT them again when addresses of all subprogs are known. Blinding process in the first JIT phase caused second JIT to miss adjustment of special ld_imm64. Fix this issue by ignoring special ld_imm64 instructions that don't have user controlled constants and shouldn't be blinded. | |||||
| CVE-2022-49551 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usb: isp1760: Fix out-of-bounds array access Running the driver through kasan gives an interesting splat: BUG: KASAN: global-out-of-bounds in isp1760_register+0x180/0x70c Read of size 20 at addr f1db2e64 by task swapper/0/1 (...) isp1760_register from isp1760_plat_probe+0x1d8/0x220 (...) This happens because the loop reading the regmap fields for the different ISP1760 variants look like this: for (i = 0; i < HC_FIELD_MAX; i++) { ... } Meaning it expects the arrays to be at least HC_FIELD_MAX - 1 long. However the arrays isp1760_hc_reg_fields[], isp1763_hc_reg_fields[], isp1763_hc_volatile_ranges[] and isp1763_dc_volatile_ranges[] are dynamically sized during compilation. Fix this by putting an empty assignment to the [HC_FIELD_MAX] and [DC_FIELD_MAX] array member at the end of each array. This will make the array one member longer than it needs to be, but avoids the risk of overwriting whatever is inside [HC_FIELD_MAX - 1] and is simple and intuitive to read. Also add comments explaining what is going on. | |||||
| CVE-2022-49550 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: provide block_invalidate_folio to fix memory leak The ntfs3 filesystem lacks the 'invalidate_folio' method and it causes memory leak. If you write to the filesystem and then unmount it, the cached written data are not freed and they are permanently leaked. | |||||
| CVE-2022-49549 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: x86/MCE/AMD: Fix memory leak when threshold_create_bank() fails In mce_threshold_create_device(), if threshold_create_bank() fails, the previously allocated threshold banks array @bp will be leaked because the call to mce_threshold_remove_device() will not free it. This happens because mce_threshold_remove_device() fetches the pointer through the threshold_banks per-CPU variable but bp is written there only after the bank creation is successful, and not before, when threshold_create_bank() fails. Add a helper which unwinds all the bank creation work previously done and pass into it the previously allocated threshold banks array for freeing. [ bp: Massage. ] | |||||