Total
395684 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-45407 | 1 Lizardbyte | 1 Sunshine | 2026-06-17 | N/A | 6.5 MEDIUM |
| Sunshine is a self-hosted game stream host for Moonlight. Clients that experience a MITM attack during the pairing process may inadvertantly allow access to an unintended client rather than failing authentication due to a PIN validation error. The pairing attempt fails due to the incorrect PIN, but the certificate from the forged pairing attempt is incorrectly persisted prior to the completion of the pairing request. This allows access to the certificate belonging to the attacker. | |||||
| CVE-2024-45406 | 1 Craftcms | 1 Craft Cms | 2026-06-17 | N/A | 5.5 MEDIUM |
| Craft is a content management system (CMS). Craft CMS 5 stored XSS can be triggered by the breadcrumb list and title fields with user input. | |||||
| CVE-2024-45405 | 2026-06-17 | N/A | 6.0 MEDIUM | ||
| `gix-path` is a crate of the `gitoxide` project (an implementation of `git` written in Rust) dealing paths and their conversions. Prior to version 0.10.11, `gix-path` runs `git` to find the path of a configuration file associated with the `git` installation, but improperly resolves paths containing unusual or non-ASCII characters, in rare cases enabling a local attacker to inject configuration leading to code execution. Version 0.10.11 contains a patch for the issue. In `gix_path::env`, the underlying implementation of the `installation_config` and `installation_config_prefix` functions calls `git config -l --show-origin` to find the path of a file to treat as belonging to the `git` installation. Affected versions of `gix-path` do not pass `-z`/`--null` to cause `git` to report literal paths. Instead, to cover the occasional case that `git` outputs a quoted path, they attempt to parse the path by stripping the quotation marks. The problem is that, when a path is quoted, it may change in substantial ways beyond the concatenation of quotation marks. If not reversed, these changes can result in another valid path that is not equivalent to the original. On a single-user system, it is not possible to exploit this, unless `GIT_CONFIG_SYSTEM` and `GIT_CONFIG_GLOBAL` have been set to unusual values or Git has been installed in an unusual way. Such a scenario is not expected. Exploitation is unlikely even on a multi-user system, though it is plausible in some uncommon configurations or use cases. In general, exploitation is more likely to succeed if users are expected to install `git` themselves, and are likely to do so in predictable locations; locations where `git` is installed, whether due to usernames in their paths or otherwise, contain characters that `git` quotes by default in paths, such as non-English letters and accented letters; a custom `system`-scope configuration file is specified with the `GIT_CONFIG_SYSTEM` environment variable, and its path is in an unusual location or has strangely named components; or a `system`-scope configuration file is absent, empty, or suppressed by means other than `GIT_CONFIG_NOSYSTEM`. Currently, `gix-path` can treat a `global`-scope configuration file as belonging to the installation if no higher scope configuration file is available. This increases the likelihood of exploitation even on a system where `git` is installed system-wide in an ordinary way. However, exploitation is expected to be very difficult even under any combination of those factors. | |||||
| CVE-2024-45404 | 1 Citeum | 1 Opencti | 2026-06-17 | N/A | 8.1 HIGH |
| OpenCTI is an open-source cyber threat intelligence platform. In versions below 6.2.18, because the function to limit the rate of OTP does not exist, an attacker with valid credentials or a malicious user who commits internal fraud can break through the two-factor authentication and hijack the account. This is because the otpLogin mutation does not implement One Time Password rate limiting. As of time of publication, it is unknown whether a patch is available. | |||||
| CVE-2024-45403 | 1 Dena | 1 H2o | 2026-06-17 | N/A | 3.7 LOW |
| h2o is an HTTP server with support for HTTP/1.x, HTTP/2 and HTTP/3. When h2o is configured as a reverse proxy and HTTP/3 requests are cancelled by the client, h2o might crash due to an assertion failure. The crash can be exploited by an attacker to mount a Denial-of-Service attack. By default, the h2o standalone server automatically restarts, minimizing the impact. However, HTTP requests that were served concurrently will still be disrupted. The vulnerability has been addressed in commit 1ed32b2. Users may disable the use of HTTP/3 to mitigate the issue. | |||||
| CVE-2024-45402 | 1 Dena | 1 Picotls | 2026-06-17 | N/A | 8.6 HIGH |
| Picotls is a TLS protocol library that allows users select different crypto backends based on their use case. When parsing a spoofed TLS handshake message, picotls (specifically, bindings within picotls that call the crypto libraries) may attempt to free the same memory twice. This double free occurs during the disposal of multiple objects without any intervening calls to malloc Typically, this triggers the malloc implementation to detect the error and abort the process. However, depending on the internals of malloc and the crypto backend being used, the flaw could potentially lead to a use-after-free scenario, which might allow for arbitrary code execution. The vulnerability is addressed with commit 9b88159ce763d680e4a13b6e8f3171ae923a535d. | |||||
| CVE-2024-45401 | 1 Stripe | 1 Stripe Cli | 2026-06-17 | N/A | 7.5 HIGH |
| stripe-cli is a command-line tool for the payment processor Stripe. A vulnerability exists in stripe-cli starting in version 1.11.1 and prior to version 1.21.3 where a plugin package containing a manifest with a malformed plugin shortname installed using the --archive-url or --archive-path flags can overwrite arbitrary files. The update in version 1.21.3 addresses the path traversal vulnerability by removing the ability to install plugins from an archive URL or path. There has been no evidence of exploitation of this vulnerability. | |||||
| CVE-2024-45400 | 1 Mlewand | 1 Open Link | 2026-06-17 | N/A | 6.1 MEDIUM |
| ckeditor-plugin-openlink is a plugin for the CKEditor JavaScript text editor that extends the context menu with a possibility to open a link in a new tab. A vulnerability in versions of the plugin prior to 1.0.7 allowed a user to execute JavaScript code by abusing the link href attribute. The fix is available starting with version 1.0.7. | |||||
| CVE-2024-45399 | 1 Cern | 1 Indico | 2026-06-17 | N/A | 4.3 MEDIUM |
| Indico is an event management system that uses Flask-Multipass, a multi-backend authentication system for Flask. In Indico prior to version 3.3.4, corresponding to Flask-Multipass prior to version 0.5.5, there is a Cross-Site-Scripting vulnerability during account creation when redirecting to the `next` URL. Exploitation requires initiating the account creation process with a maliciously crafted link, and then finalizing the signup process. Because of this, it can only target newly created (and thus unprivileged) Indico users. Indico 3.3.4 upgrades the dependency on Flask-Multipass to version 0.5.5, which fixes the issue. Those who build the Indico package themselves and cannot upgrade can update the `flask-multipass` dependency to `>=0.5.5` which fixes the vulnerability. Otherwise one could configure one's web server to disallow requests containing a query string with a `next` parameter that starts with `javascript:`. | |||||
| CVE-2024-45398 | 1 Contao | 1 Contao | 2026-06-17 | N/A | 8.3 HIGH |
| Contao is an Open Source CMS. In affected versions a back end user with access to the file manager can upload malicious files and execute them on the server. Users are advised to update to Contao 4.13.49, 5.3.15 or 5.4.3. Users unable to update are advised to configure their web server so it does not execute PHP files and other scripts in the Contao file upload directory. | |||||
| CVE-2024-45397 | 1 Dena | 1 H2o | 2026-06-17 | N/A | 5.9 MEDIUM |
| h2o is an HTTP server with support for HTTP/1.x, HTTP/2 and HTTP/3. When an HTTP request using TLS/1.3 early data on top of TCP Fast Open or QUIC 0-RTT packets is received and the IP-address-based access control is used, the access control does not detect and prohibit HTTP requests conveyed by packets with a spoofed source address. This behavior allows attackers on the network to execute HTTP requests from addresses that are otherwise rejected by the address-based access control. The vulnerability has been addressed in commit 15ed15a. Users may disable the use of TCP FastOpen and QUIC to mitigate the issue. | |||||
| CVE-2024-45396 | 1 Dena | 1 Quicly | 2026-06-17 | N/A | 7.5 HIGH |
| Quicly is an IETF QUIC protocol implementation. Quicly up to commtit d720707 is susceptible to a denial-of-service attack. A remote attacker can exploit these bugs to trigger an assertion failure that crashes process using quicly. The vulnerability is addressed with commit 2a95896104901589c495bc41460262e64ffcad5c. | |||||
| CVE-2024-45395 | 1 Sigstore | 1 Sigstore-go | 2026-06-17 | N/A | 3.1 LOW |
| sigstore-go, a Go library for Sigstore signing and verification, is susceptible to a denial of service attack in versions prior to 0.6.1 when a verifier is provided a maliciously crafted Sigstore Bundle containing large amounts of verifiable data, in the form of signed transparency log entries, RFC 3161 timestamps, and attestation subjects. The verification of these data structures is computationally expensive. This can be used to consume excessive CPU resources, leading to a denial of service attack. TUF's security model labels this type of vulnerability an "Endless data attack," and can lead to verification failing to complete and disrupting services that rely on sigstore-go for verification. This vulnerability is addressed with sigstore-go 0.6.1, which adds hard limits to the number of verifiable data structures that can be processed in a bundle. Verification will fail if a bundle has data that exceeds these limits. The limits are 32 signed transparency log entries, 32 RFC 3161 timestamps, 1024 attestation subjects, and 32 digests per attestation subject. These limits are intended to be high enough to accommodate the vast majority of use cases, while preventing the verification of maliciously crafted bundles that contain large amounts of verifiable data. Users who are vulnerable but unable to quickly upgrade may consider adding manual bundle validation to enforce limits similar to those in the referenced patch prior to calling sigstore-go's verification functions. | |||||
| CVE-2024-45394 | 1 Authenticator | 1 Authenticator | 2026-06-17 | N/A | 8.8 HIGH |
| Authenticator is a browser extension that generates two-step verification codes. In versions 7.0.0 and below, encryption keys for user data were stored encrypted at-rest using only AES-256 and the EVP_BytesToKey KDF. Therefore, attackers with a copy of a user's data are able to brute-force the user's encryption key. Users on version 8.0.0 and above are automatically migrated away from the weak encoding on first login. Users should destroy encrypted backups made with versions prior to 8.0.0. | |||||
| CVE-2024-45393 | 1 Cvat | 1 Computer Vision Annotation Tool | 2026-06-17 | N/A | 6.4 MEDIUM |
| Computer Vision Annotation Tool (CVAT) is an interactive video and image annotation tool for computer vision. An attacker with a CVAT account can access webhook delivery information for any webhook registered on the CVAT instance, including that of other users. For each delivery, this contains information about the event that caused the delivery, typically including full details about the object on which an action was performed (such as the task for an "update:task" event), and the user who performed the action. In addition, the attacker can redeliver any past delivery of any webhook, and trigger a ping event for any webhook. Upgrade to CVAT 2.18.0 or any later version. | |||||
| CVE-2024-45392 | 1 Salesagility | 1 Suitecrm | 2026-06-17 | N/A | 7.7 HIGH |
| SuiteCRM is an open-source customer relationship management (CRM) system. Prior to version 7.14.5 and 8.6.2, insufficient access control checks allow a threat actor to delete records via the API. Versions 7.14.5 and 8.6.2 contain a patch for the issue. | |||||
| CVE-2024-45391 | 1 Ssw | 1 Tinacms\/cli | 2026-06-17 | N/A | 7.5 HIGH |
| Tina is an open-source content management system (CMS). Sites building with Tina CMS's command line interface (CLI) prior to version 1.6.2 that use a search token may be vulnerable to the search token being leaked via lock file (tina-lock.json). Administrators of Tina-enabled websites with search setup should rotate their key immediately. This issue has been patched in @tinacms/cli version 1.6.2. Upgrading and rotating the search token is required for the proper fix. | |||||
| CVE-2024-45390 | 1 Blakeembrey | 1 Template | 2026-06-17 | N/A | 7.3 HIGH |
| @blakeembrey/template is a string template library. Prior to version 1.2.0, it is possible to inject and run code within the template if the attacker has access to write the template name. Version 1.2.0 contains a patch. As a workaround, don't pass untrusted input as the template display name, or don't use the display name feature. | |||||
| CVE-2024-45389 | 1 Pagefind | 1 Pagefind | 2026-06-17 | N/A | 6.4 MEDIUM |
| Pagefind, a fully static search library, initializes its dynamic JavaScript and WebAssembly files relative to the location of the first script the user loads. This information is gathered by looking up the value of `document.currentScript.src`. Prior to Pagefind version 1.1.1, it is possible to "clobber" this lookup with otherwise benign HTML on the page. This will cause `document.currentScript.src` to resolve as an external domain, which will then be used by Pagefind to load dependencies. This exploit would only work in the case that an attacker could inject HTML to a live, hosted, website. In these cases, this would act as a way to escalate the privilege available to an attacker. This assumes they have the ability to add some elements to the page (for example, `img` tags with a `name` attribute), but not others, as adding a `script` to the page would itself be the cross-site scripting vector. Pagefind has tightened this resolution in version 1.1.1 by ensuring the source is loaded from a valid script element. There are no reports of this being exploited in the wild via Pagefind. | |||||
| CVE-2024-45388 | 1 Hoverfly | 1 Hoverfly | 2026-06-17 | N/A | 7.5 HIGH |
| Hoverfly is a lightweight service virtualization/ API simulation / API mocking tool for developers and testers. The `/api/v2/simulation` POST handler allows users to create new simulation views from the contents of a user-specified file. This feature can be abused by an attacker to read arbitrary files from the Hoverfly server. Note that, although the code prevents absolute paths from being specified, an attacker can escape out of the `hf.Cfg.ResponsesBodyFilesPath` base path by using `../` segments and reach any arbitrary files. This issue was found using the Uncontrolled data used in path expression CodeQL query for python. Users are advised to make sure the final path (`filepath.Join(hf.Cfg.ResponsesBodyFilesPath, filePath)`) is contained within the expected base path (`filepath.Join(hf.Cfg.ResponsesBodyFilesPath, "/")`). This issue is also tracked as GHSL-2023-274. | |||||