Filtered by vendor Linux
Subscribe
Total
19344 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2022-50504 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/rtas: avoid scheduling in rtas_os_term() It's unsafe to use rtas_busy_delay() to handle a busy status from the ibm,os-term RTAS function in rtas_os_term(): Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b BUG: sleeping function called from invalid context at arch/powerpc/kernel/rtas.c:618 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0 preempt_count: 2, expected: 0 CPU: 7 PID: 1 Comm: swapper/0 Tainted: G D 6.0.0-rc5-02182-gf8553a572277-dirty #9 Call Trace: [c000000007b8f000] [c000000001337110] dump_stack_lvl+0xb4/0x110 (unreliable) [c000000007b8f040] [c0000000002440e4] __might_resched+0x394/0x3c0 [c000000007b8f0e0] [c00000000004f680] rtas_busy_delay+0x120/0x1b0 [c000000007b8f100] [c000000000052d04] rtas_os_term+0xb8/0xf4 [c000000007b8f180] [c0000000001150fc] pseries_panic+0x50/0x68 [c000000007b8f1f0] [c000000000036354] ppc_panic_platform_handler+0x34/0x50 [c000000007b8f210] [c0000000002303c4] notifier_call_chain+0xd4/0x1c0 [c000000007b8f2b0] [c0000000002306cc] atomic_notifier_call_chain+0xac/0x1c0 [c000000007b8f2f0] [c0000000001d62b8] panic+0x228/0x4d0 [c000000007b8f390] [c0000000001e573c] do_exit+0x140c/0x1420 [c000000007b8f480] [c0000000001e586c] make_task_dead+0xdc/0x200 Use rtas_busy_delay_time() instead, which signals without side effects whether to attempt the ibm,os-term RTAS call again. | |||||
| CVE-2022-50503 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mtd: lpddr2_nvm: Fix possible null-ptr-deref It will cause null-ptr-deref when resource_size(add_range) invoked, if platform_get_resource() returns NULL. | |||||
| CVE-2022-50501 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: coda: Add check for dcoda_iram_alloc As the coda_iram_alloc may return NULL pointer, it should be better to check the return value in order to avoid NULL poineter dereference, same as the others. | |||||
| CVE-2022-50500 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: fix memory leak in nsim_drv_probe() when nsim_dev_resources_register() failed If some items in nsim_dev_resources_register() fail, memory leak will occur. The following is the memory leak information. unreferenced object 0xffff888074c02600 (size 128): comm "echo", pid 8159, jiffies 4294945184 (age 493.530s) hex dump (first 32 bytes): 40 47 ea 89 ff ff ff ff 01 00 00 00 00 00 00 00 @G.............. ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ backtrace: [<0000000011a31c98>] kmalloc_trace+0x22/0x60 [<0000000027384c69>] devl_resource_register+0x144/0x4e0 [<00000000a16db248>] nsim_drv_probe+0x37a/0x1260 [<000000007d1f448c>] really_probe+0x20b/0xb10 [<00000000c416848a>] __driver_probe_device+0x1b3/0x4a0 [<00000000077e0351>] driver_probe_device+0x49/0x140 [<0000000054f2465a>] __device_attach_driver+0x18c/0x2a0 [<000000008538f359>] bus_for_each_drv+0x151/0x1d0 [<0000000038e09747>] __device_attach+0x1c9/0x4e0 [<00000000dd86e533>] bus_probe_device+0x1d5/0x280 [<00000000839bea35>] device_add+0xae0/0x1cb0 [<000000009c2abf46>] new_device_store+0x3b6/0x5f0 [<00000000fb823d7f>] bus_attr_store+0x72/0xa0 [<000000007acc4295>] sysfs_kf_write+0x106/0x160 [<000000005f50cb4d>] kernfs_fop_write_iter+0x3a8/0x5a0 [<0000000075eb41bf>] vfs_write+0x8f0/0xc80 | |||||
| CVE-2022-50499 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: media: dvb-core: Fix double free in dvb_register_device() In function dvb_register_device() -> dvb_register_media_device() -> dvb_create_media_entity(), dvb->entity is allocated and initialized. If the initialization fails, it frees the dvb->entity, and return an error code. The caller takes the error code and handles the error by calling dvb_media_device_free(), which unregisters the entity and frees the field again if it is not NULL. As dvb->entity may not NULLed in dvb_create_media_entity() when the allocation of dvbdev->pad fails, a double free may occur. This may also cause an Use After free in media_device_unregister_entity(). Fix this by storing NULL to dvb->entity when it is freed. | |||||
| CVE-2022-50498 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: eth: alx: take rtnl_lock on resume Zbynek reports that alx trips an rtnl assertion on resume: RTNL: assertion failed at net/core/dev.c (2891) RIP: 0010:netif_set_real_num_tx_queues+0x1ac/0x1c0 Call Trace: <TASK> __alx_open+0x230/0x570 [alx] alx_resume+0x54/0x80 [alx] ? pci_legacy_resume+0x80/0x80 dpm_run_callback+0x4a/0x150 device_resume+0x8b/0x190 async_resume+0x19/0x30 async_run_entry_fn+0x30/0x130 process_one_work+0x1e5/0x3b0 indeed the driver does not hold rtnl_lock during its internal close and re-open functions during suspend/resume. Note that this is not a huge bug as the driver implements its own locking, and does not implement changing the number of queues, but we need to silence the splat. | |||||
| CVE-2022-50497 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: fix shift-out-of-bounds in check_special_flags UBSAN reported a shift-out-of-bounds warning: left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8d/0xcf lib/dump_stack.c:106 ubsan_epilogue+0xa/0x44 lib/ubsan.c:151 __ubsan_handle_shift_out_of_bounds+0x1e7/0x208 lib/ubsan.c:322 check_special_flags fs/binfmt_misc.c:241 [inline] create_entry fs/binfmt_misc.c:456 [inline] bm_register_write+0x9d3/0xa20 fs/binfmt_misc.c:654 vfs_write+0x11e/0x580 fs/read_write.c:582 ksys_write+0xcf/0x120 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x34/0x80 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x4194e1 Since the type of Node's flags is unsigned long, we should define these macros with same type too. | |||||
| CVE-2022-50496 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: dm cache: Fix UAF in destroy() Dm_cache also has the same UAF problem when dm_resume() and dm_destroy() are concurrent. Therefore, cancelling timer again in destroy(). | |||||
| CVE-2022-50494 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash When CPU 0 is offline and intel_powerclamp is used to inject idle, it generates kernel BUG: BUG: using smp_processor_id() in preemptible [00000000] code: bash/15687 caller is debug_smp_processor_id+0x17/0x20 CPU: 4 PID: 15687 Comm: bash Not tainted 5.19.0-rc7+ #57 Call Trace: <TASK> dump_stack_lvl+0x49/0x63 dump_stack+0x10/0x16 check_preemption_disabled+0xdd/0xe0 debug_smp_processor_id+0x17/0x20 powerclamp_set_cur_state+0x7f/0xf9 [intel_powerclamp] ... ... Here CPU 0 is the control CPU by default and changed to the current CPU, if CPU 0 offlined. This check has to be performed under cpus_read_lock(), hence the above warning. Use get_cpu() instead of smp_processor_id() to avoid this BUG. [ rjw: Subject edits ] | |||||
| CVE-2022-50491 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: coresight: cti: Fix hang in cti_disable_hw() cti_enable_hw() and cti_disable_hw() are called from an atomic context so shouldn't use runtime PM because it can result in a sleep when communicating with firmware. Since commit 3c6656337852 ("Revert "firmware: arm_scmi: Add clock management to the SCMI power domain""), this causes a hang on Juno when running the Perf Coresight tests or running this command: perf record -e cs_etm//u -- ls This was also missed until the revert commit because pm_runtime_put() was called with the wrong device until commit 692c9a499b28 ("coresight: cti: Correct the parameter for pm_runtime_put") With lock and scheduler debugging enabled the following is output: coresight cti_sys0: cti_enable_hw -- dev:cti_sys0 parent: 20020000.cti BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1151 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 330, name: perf-exec preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948 softirqs last enabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 3 PID: 330 Comm: perf-exec Not tainted 6.0.0-00053-g042116d99298 #7 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Sep 13 2022 Call trace: dump_backtrace+0x134/0x140 show_stack+0x20/0x58 dump_stack_lvl+0x8c/0xb8 dump_stack+0x18/0x34 __might_resched+0x180/0x228 __might_sleep+0x50/0x88 __pm_runtime_resume+0xac/0xb0 cti_enable+0x44/0x120 coresight_control_assoc_ectdev+0xc0/0x150 coresight_enable_path+0xb4/0x288 etm_event_start+0x138/0x170 etm_event_add+0x48/0x70 event_sched_in.isra.122+0xb4/0x280 merge_sched_in+0x1fc/0x3d0 visit_groups_merge.constprop.137+0x16c/0x4b0 ctx_sched_in+0x114/0x1f0 perf_event_sched_in+0x60/0x90 ctx_resched+0x68/0xb0 perf_event_exec+0x138/0x508 begin_new_exec+0x52c/0xd40 load_elf_binary+0x6b8/0x17d0 bprm_execve+0x360/0x7f8 do_execveat_common.isra.47+0x218/0x238 __arm64_sys_execve+0x48/0x60 invoke_syscall+0x4c/0x110 el0_svc_common.constprop.4+0xfc/0x120 do_el0_svc+0x34/0xc0 el0_svc+0x40/0x98 el0t_64_sync_handler+0x98/0xc0 el0t_64_sync+0x170/0x174 Fix the issue by removing the runtime PM calls completely. They are not needed here because it must have already been done when building the path for a trace. [ Fix build warnings ] | |||||
| CVE-2022-50489 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/mipi-dsi: Detach devices when removing the host Whenever the MIPI-DSI host is unregistered, the code of mipi_dsi_host_unregister() loops over every device currently found on that bus and will unregister it. However, it doesn't detach it from the bus first, which leads to all kind of resource leaks if the host wants to perform some clean up whenever a device is detached. | |||||
| CVE-2022-50486 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: ti: Fix return type of netcp_ndo_start_xmit() With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/net/ethernet/ti/netcp_core.c:1944:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = netcp_ndo_start_xmit, ^~~~~~~~~~~~~~~~~~~~ 1 error generated. ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of netcp_ndo_start_xmit() to match the prototype's to resolve the warning and CFI failure. | |||||
| CVE-2022-50485 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ext4: add EXT4_IGET_BAD flag to prevent unexpected bad inode There are many places that will get unhappy (and crash) when ext4_iget() returns a bad inode. However, if iget the boot loader inode, allows a bad inode to be returned, because the inode may not be initialized. This mechanism can be used to bypass some checks and cause panic. To solve this problem, we add a special iget flag EXT4_IGET_BAD. Only with this flag we'd be returning bad inode from ext4_iget(), otherwise we always return the error code if the inode is bad inode.(suggested by Jan Kara) | |||||
| CVE-2022-50484 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix potential memory leaks When the driver hits -ENOMEM at allocating a URB or a buffer, it aborts and goes to the error path that releases the all previously allocated resources. However, when -ENOMEM hits at the middle of the sync EP URB allocation loop, the partially allocated URBs might be left without released, because ep->nurbs is still zero at that point. Fix it by setting ep->nurbs at first, so that the error handler loops over the full URB list. | |||||
| CVE-2022-50482 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clean up si_domain in the init_dmars() error path A splat from kmem_cache_destroy() was seen with a kernel prior to commit ee2653bbe89d ("iommu/vt-d: Remove domain and devinfo mempool") when there was a failure in init_dmars(), because the iommu_domain cache still had objects. While the mempool code is now gone, there still is a leak of the si_domain memory if init_dmars() fails. So clean up si_domain in the init_dmars() error path. | |||||
| CVE-2022-50481 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter() If device_register() fails in cxl_register_afu|adapter(), the device is not added, device_unregister() can not be called in the error path, otherwise it will cause a null-ptr-deref because of removing not added device. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So split device_unregister() into device_del() and put_device(), then goes to put dev when register fails. | |||||
| CVE-2022-50480 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: memory: pl353-smc: Fix refcount leak bug in pl353_smc_probe() The break of for_each_available_child_of_node() needs a corresponding of_node_put() when the reference 'child' is not used anymore. Here we do not need to call of_node_put() in fail path as '!match' means no break. While the of_platform_device_create() will created a new reference by 'child' but it has considered the refcounting. | |||||
| CVE-2022-50478 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset() Patch series "nilfs2: fix UBSAN shift-out-of-bounds warnings on mount time". The first patch fixes a bug reported by syzbot, and the second one fixes the remaining bug of the same kind. Although they are triggered by the same super block data anomaly, I divided it into the above two because the details of the issues and how to fix it are different. Both are required to eliminate the shift-out-of-bounds issues at mount time. This patch (of 2): If the block size exponent information written in an on-disk superblock is corrupted, nilfs_sb2_bad_offset helper function can trigger shift-out-of-bounds warning followed by a kernel panic (if panic_on_warn is set): shift exponent 38983 is too large for 64-bit type 'unsigned long long' Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_shift_out_of_bounds+0x33d/0x3b0 lib/ubsan.c:322 nilfs_sb2_bad_offset fs/nilfs2/the_nilfs.c:449 [inline] nilfs_load_super_block+0xdf5/0xe00 fs/nilfs2/the_nilfs.c:523 init_nilfs+0xb7/0x7d0 fs/nilfs2/the_nilfs.c:577 nilfs_fill_super+0xb1/0x5d0 fs/nilfs2/super.c:1047 nilfs_mount+0x613/0x9b0 fs/nilfs2/super.c:1317 ... In addition, since nilfs_sb2_bad_offset() performs multiplication without considering the upper bound, the computation may overflow if the disk layout parameters are not normal. This fixes these issues by inserting preliminary sanity checks for those parameters and by converting the comparison from one involving multiplication and left bit-shifting to one using division and right bit-shifting. | |||||
| CVE-2022-50477 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: rtc: class: Fix potential memleak in devm_rtc_allocate_device() devm_rtc_allocate_device() will alloc a rtc_device first, and then run dev_set_name(). If dev_set_name() failed, the rtc_device will memleak. Move devm_add_action_or_reset() in front of dev_set_name() to prevent memleak. unreferenced object 0xffff888110a53000 (size 2048): comm "python3", pid 470, jiffies 4296078308 (age 58.882s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 30 a5 10 81 88 ff ff .........0...... 08 30 a5 10 81 88 ff ff 00 00 00 00 00 00 00 00 .0.............. backtrace: [<000000004aac0364>] kmalloc_trace+0x21/0x110 [<000000000ff02202>] devm_rtc_allocate_device+0xd4/0x400 [<000000001bdf5639>] devm_rtc_device_register+0x1a/0x80 [<00000000351bf81c>] rx4581_probe+0xdd/0x110 [rtc_rx4581] [<00000000f0eba0ae>] spi_probe+0xde/0x130 [<00000000bff89ee8>] really_probe+0x175/0x3f0 [<00000000128e8d84>] __driver_probe_device+0xe6/0x170 [<00000000ee5bf913>] device_driver_attach+0x32/0x80 [<00000000f3f28f92>] bind_store+0x10b/0x1a0 [<000000009ff812d8>] drv_attr_store+0x49/0x70 [<000000008139c323>] sysfs_kf_write+0x8d/0xb0 [<00000000b6146e01>] kernfs_fop_write_iter+0x214/0x2d0 [<00000000ecbe3895>] vfs_write+0x61a/0x7d0 [<00000000aa2196ea>] ksys_write+0xc8/0x190 [<0000000046a600f5>] do_syscall_64+0x37/0x90 [<00000000541a336f>] entry_SYSCALL_64_after_hwframe+0x63/0xcd | |||||
| CVE-2022-50476 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ntb_netdev: Use dev_kfree_skb_any() in interrupt context TX/RX callback handlers (ntb_netdev_tx_handler(), ntb_netdev_rx_handler()) can be called in interrupt context via the DMA framework when the respective DMA operations have completed. As such, any calls by these routines to free skb's, should use the interrupt context safe dev_kfree_skb_any() function. Previously, these callback handlers would call the interrupt unsafe version of dev_kfree_skb(). This has not presented an issue on Intel IOAT DMA engines as that driver utilizes tasklets rather than a hard interrupt handler, like the AMD PTDMA DMA driver. On AMD systems, a kernel WARNING message is encountered, which is being issued from skb_release_head_state() due to in_hardirq() being true. Besides the user visible WARNING from the kernel, the other symptom of this bug was that TCP/IP performance across the ntb_netdev interface was very poor, i.e. approximately an order of magnitude below what was expected. With the repair to use dev_kfree_skb_any(), kernel WARNINGs from skb_release_head_state() ceased and TCP/IP performance, as measured by iperf, was on par with expected results, approximately 20 Gb/s on AMD Milan based server. Note that this performance is comparable with Intel based servers. | |||||