Total
394080 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-50260 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: sock_map: fix a NULL pointer dereference in sock_map_link_update_prog() The following race condition could trigger a NULL pointer dereference: sock_map_link_detach(): sock_map_link_update_prog(): mutex_lock(&sockmap_mutex); ... sockmap_link->map = NULL; mutex_unlock(&sockmap_mutex); mutex_lock(&sockmap_mutex); ... sock_map_prog_link_lookup(sockmap_link->map); mutex_unlock(&sockmap_mutex); <continue> Fix it by adding a NULL pointer check. In this specific case, it makes no sense to update a link which is being released. | |||||
| CVE-2024-50259 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netdevsim: Add trailing zero to terminate the string in nsim_nexthop_bucket_activity_write() This was found by a static analyzer. We should not forget the trailing zero after copy_from_user() if we will further do some string operations, sscanf() in this case. Adding a trailing zero will ensure that the function performs properly. | |||||
| CVE-2024-50258 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: fix crash when config small gso_max_size/gso_ipv4_max_size Config a small gso_max_size/gso_ipv4_max_size will lead to an underflow in sk_dst_gso_max_size(), which may trigger a BUG_ON crash, because sk->sk_gso_max_size would be much bigger than device limits. Call Trace: tcp_write_xmit tso_segs = tcp_init_tso_segs(skb, mss_now); tcp_set_skb_tso_segs tcp_skb_pcount_set // skb->len = 524288, mss_now = 8 // u16 tso_segs = 524288/8 = 65535 -> 0 tso_segs = DIV_ROUND_UP(skb->len, mss_now) BUG_ON(!tso_segs) Add check for the minimum value of gso_max_size and gso_ipv4_max_size. | |||||
| CVE-2024-50255 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecs Fix __hci_cmd_sync_sk() to return not NULL for unknown opcodes. __hci_cmd_sync_sk() returns NULL if a command returns a status event. However, it also returns NULL where an opcode doesn't exist in the hci_cc table because hci_cmd_complete_evt() assumes status = skb->data[0] for unknown opcodes. This leads to null-ptr-deref in cmd_sync for HCI_OP_READ_LOCAL_CODECS as there is no hci_cc for HCI_OP_READ_LOCAL_CODECS, which always assumes status = skb->data[0]. KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 1 PID: 2000 Comm: kworker/u9:5 Not tainted 6.9.0-ga6bcb805883c-dirty #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci7 hci_power_on RIP: 0010:hci_read_supported_codecs+0xb9/0x870 net/bluetooth/hci_codec.c:138 Code: 08 48 89 ef e8 b8 c1 8f fd 48 8b 75 00 e9 96 00 00 00 49 89 c6 48 ba 00 00 00 00 00 fc ff df 4c 8d 60 70 4c 89 e3 48 c1 eb 03 <0f> b6 04 13 84 c0 0f 85 82 06 00 00 41 83 3c 24 02 77 0a e8 bf 78 RSP: 0018:ffff888120bafac8 EFLAGS: 00010212 RAX: 0000000000000000 RBX: 000000000000000e RCX: ffff8881173f0040 RDX: dffffc0000000000 RSI: ffffffffa58496c0 RDI: ffff88810b9ad1e4 RBP: ffff88810b9ac000 R08: ffffffffa77882a7 R09: 1ffffffff4ef1054 R10: dffffc0000000000 R11: fffffbfff4ef1055 R12: 0000000000000070 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810b9ac000 FS: 0000000000000000(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6ddaa3439e CR3: 0000000139764003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> hci_read_local_codecs_sync net/bluetooth/hci_sync.c:4546 [inline] hci_init_stage_sync net/bluetooth/hci_sync.c:3441 [inline] hci_init4_sync net/bluetooth/hci_sync.c:4706 [inline] hci_init_sync net/bluetooth/hci_sync.c:4742 [inline] hci_dev_init_sync net/bluetooth/hci_sync.c:4912 [inline] hci_dev_open_sync+0x19a9/0x2d30 net/bluetooth/hci_sync.c:4994 hci_dev_do_open net/bluetooth/hci_core.c:483 [inline] hci_power_on+0x11e/0x560 net/bluetooth/hci_core.c:1015 process_one_work kernel/workqueue.c:3267 [inline] process_scheduled_works+0x8ef/0x14f0 kernel/workqueue.c:3348 worker_thread+0x91f/0xe50 kernel/workqueue.c:3429 kthread+0x2cb/0x360 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 | |||||
| CVE-2024-50254 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Free dynamically allocated bits in bpf_iter_bits_destroy() bpf_iter_bits_destroy() uses "kit->nr_bits <= 64" to check whether the bits are dynamically allocated. However, the check is incorrect and may cause a kmemleak as shown below: unreferenced object 0xffff88812628c8c0 (size 32): comm "swapper/0", pid 1, jiffies 4294727320 hex dump (first 32 bytes): b0 c1 55 f5 81 88 ff ff f0 f0 f0 f0 f0 f0 f0 f0 ..U........... f0 f0 f0 f0 f0 f0 f0 f0 00 00 00 00 00 00 00 00 .............. backtrace (crc 781e32cc): [<00000000c452b4ab>] kmemleak_alloc+0x4b/0x80 [<0000000004e09f80>] __kmalloc_node_noprof+0x480/0x5c0 [<00000000597124d6>] __alloc.isra.0+0x89/0xb0 [<000000004ebfffcd>] alloc_bulk+0x2af/0x720 [<00000000d9c10145>] prefill_mem_cache+0x7f/0xb0 [<00000000ff9738ff>] bpf_mem_alloc_init+0x3e2/0x610 [<000000008b616eac>] bpf_global_ma_init+0x19/0x30 [<00000000fc473efc>] do_one_initcall+0xd3/0x3c0 [<00000000ec81498c>] kernel_init_freeable+0x66a/0x940 [<00000000b119f72f>] kernel_init+0x20/0x160 [<00000000f11ac9a7>] ret_from_fork+0x3c/0x70 [<0000000004671da4>] ret_from_fork_asm+0x1a/0x30 That is because nr_bits will be set as zero in bpf_iter_bits_next() after all bits have been iterated. Fix the issue by setting kit->bit to kit->nr_bits instead of setting kit->nr_bits to zero when the iteration completes in bpf_iter_bits_next(). In addition, use "!nr_bits || bits >= nr_bits" to check whether the iteration is complete and still use "nr_bits > 64" to indicate whether bits are dynamically allocated. The "!nr_bits" check is necessary because bpf_iter_bits_new() may fail before setting kit->nr_bits, and this condition will stop the iteration early instead of accessing the zeroed or freed kit->bits. Considering the initial value of kit->bits is -1 and the type of kit->nr_bits is unsigned int, change the type of kit->nr_bits to int. The potential overflow problem will be handled in the following patch. | |||||
| CVE-2024-50252 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 address The device stores IPv6 addresses that are used for encapsulation in linear memory that is managed by the driver. Changing the remote address of an ip6gre net device never worked properly, but since cited commit the following reproducer [1] would result in a warning [2] and a memory leak [3]. The problem is that the new remote address is never added by the driver to its hash table (and therefore the device) and the old address is never removed from it. Fix by programming the new address when the configuration of the ip6gre net device changes and removing the old one. If the address did not change, then the above would result in increasing the reference count of the address and then decreasing it. [1] # ip link add name bla up type ip6gre local 2001:db8:1::1 remote 2001:db8:2::1 tos inherit ttl inherit # ip link set dev bla type ip6gre remote 2001:db8:3::1 # ip link del dev bla # devlink dev reload pci/0000:01:00.0 [2] WARNING: CPU: 0 PID: 1682 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3002 mlxsw_sp_ipv6_addr_put+0x140/0x1d0 Modules linked in: CPU: 0 UID: 0 PID: 1682 Comm: ip Not tainted 6.12.0-rc3-custom-g86b5b55bc835 #151 Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023 RIP: 0010:mlxsw_sp_ipv6_addr_put+0x140/0x1d0 [...] Call Trace: <TASK> mlxsw_sp_router_netdevice_event+0x55f/0x1240 notifier_call_chain+0x5a/0xd0 call_netdevice_notifiers_info+0x39/0x90 unregister_netdevice_many_notify+0x63e/0x9d0 rtnl_dellink+0x16b/0x3a0 rtnetlink_rcv_msg+0x142/0x3f0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x242/0x390 netlink_sendmsg+0x1de/0x420 ____sys_sendmsg+0x2bd/0x320 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xd0 do_syscall_64+0x9e/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [3] unreferenced object 0xffff898081f597a0 (size 32): comm "ip", pid 1626, jiffies 4294719324 hex dump (first 32 bytes): 20 01 0d b8 00 02 00 00 00 00 00 00 00 00 00 01 ............... 21 49 61 83 80 89 ff ff 00 00 00 00 01 00 00 00 !Ia............. backtrace (crc fd9be911): [<00000000df89c55d>] __kmalloc_cache_noprof+0x1da/0x260 [<00000000ff2a1ddb>] mlxsw_sp_ipv6_addr_kvdl_index_get+0x281/0x340 [<000000009ddd445d>] mlxsw_sp_router_netdevice_event+0x47b/0x1240 [<00000000743e7757>] notifier_call_chain+0x5a/0xd0 [<000000007c7b9e13>] call_netdevice_notifiers_info+0x39/0x90 [<000000002509645d>] register_netdevice+0x5f7/0x7a0 [<00000000c2e7d2a9>] ip6gre_newlink_common.isra.0+0x65/0x130 [<0000000087cd6d8d>] ip6gre_newlink+0x72/0x120 [<000000004df7c7cc>] rtnl_newlink+0x471/0xa20 [<0000000057ed632a>] rtnetlink_rcv_msg+0x142/0x3f0 [<0000000032e0d5b5>] netlink_rcv_skb+0x50/0x100 [<00000000908bca63>] netlink_unicast+0x242/0x390 [<00000000cdbe1c87>] netlink_sendmsg+0x1de/0x420 [<0000000011db153e>] ____sys_sendmsg+0x2bd/0x320 [<000000003b6d53eb>] ___sys_sendmsg+0x9a/0xe0 [<00000000cae27c62>] __sys_sendmsg+0x7a/0xd0 | |||||
| CVE-2024-50251 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 6.2 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_payload: sanitize offset and length before calling skb_checksum() If access to offset + length is larger than the skbuff length, then skb_checksum() triggers BUG_ON(). skb_checksum() internally subtracts the length parameter while iterating over skbuff, BUG_ON(len) at the end of it checks that the expected length to be included in the checksum calculation is fully consumed. | |||||
| CVE-2024-50249 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Make rmw_lock a raw_spin_lock The following BUG was triggered: ============================= [ BUG: Invalid wait context ] 6.12.0-rc2-XXX #406 Not tainted ----------------------------- kworker/1:1/62 is trying to lock: ffffff8801593030 (&cpc_ptr->rmw_lock){+.+.}-{3:3}, at: cpc_write+0xcc/0x370 other info that might help us debug this: context-{5:5} 2 locks held by kworker/1:1/62: #0: ffffff897ef5ec98 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x2c/0x50 #1: ffffff880154e238 (&sg_policy->update_lock){....}-{2:2}, at: sugov_update_shared+0x3c/0x280 stack backtrace: CPU: 1 UID: 0 PID: 62 Comm: kworker/1:1 Not tainted 6.12.0-rc2-g9654bd3e8806 #406 Workqueue: 0x0 (events) Call trace: dump_backtrace+0xa4/0x130 show_stack+0x20/0x38 dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x28 __lock_acquire+0x480/0x1ad8 lock_acquire+0x114/0x310 _raw_spin_lock+0x50/0x70 cpc_write+0xcc/0x370 cppc_set_perf+0xa0/0x3a8 cppc_cpufreq_fast_switch+0x40/0xc0 cpufreq_driver_fast_switch+0x4c/0x218 sugov_update_shared+0x234/0x280 update_load_avg+0x6ec/0x7b8 dequeue_entities+0x108/0x830 dequeue_task_fair+0x58/0x408 __schedule+0x4f0/0x1070 schedule+0x54/0x130 worker_thread+0xc0/0x2e8 kthread+0x130/0x148 ret_from_fork+0x10/0x20 sugov_update_shared() locks a raw_spinlock while cpc_write() locks a spinlock. To have a correct wait-type order, update rmw_lock to a raw spinlock and ensure that interrupts will be disabled on the CPU holding it. [ rjw: Changelog edits ] | |||||
| CVE-2024-50245 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix possible deadlock in mi_read Mutex lock with another subclass used in ni_lock_dir(). | |||||
| CVE-2024-50244 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Additional check in ni_clear() Checking of NTFS_FLAGS_LOG_REPLAYING added to prevent access to uninitialized bitmap during replay process. | |||||
| CVE-2024-50243 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix general protection fault in run_is_mapped_full Fixed deleating of a non-resident attribute in ntfs_create_inode() rollback. | |||||
| CVE-2024-50242 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Additional check in ntfs_file_release | |||||
| CVE-2024-50240 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with this driver. | |||||
| CVE-2024-50239 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usb-legacy driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers. | |||||
| CVE-2024-50238 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend Commit 413db06c05e7 ("phy: qcom-qmp-usb: clean up probe initialisation") removed most users of the platform device driver data from the qcom-qmp-usb driver, but mistakenly also removed the initialisation despite the data still being used in the runtime PM callbacks. This bug was later reproduced when the driver was copied to create the qmp-usbc driver. Restore the driver data initialisation at probe to avoid a NULL-pointer dereference on runtime suspend. Apparently no one uses runtime PM, which currently needs to be enabled manually through sysfs, with these drivers. | |||||
| CVE-2024-50236 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: Fix memory leak in management tx In the current logic, memory is allocated for storing the MSDU context during management packet TX but this memory is not being freed during management TX completion. Similar leaks are seen in the management TX cleanup logic. Kmemleak reports this problem as below, unreferenced object 0xffffff80b64ed250 (size 16): comm "kworker/u16:7", pid 148, jiffies 4294687130 (age 714.199s) hex dump (first 16 bytes): 00 2b d8 d8 80 ff ff ff c4 74 e9 fd 07 00 00 00 .+.......t...... backtrace: [<ffffffe6e7b245dc>] __kmem_cache_alloc_node+0x1e4/0x2d8 [<ffffffe6e7adde88>] kmalloc_trace+0x48/0x110 [<ffffffe6bbd765fc>] ath10k_wmi_tlv_op_gen_mgmt_tx_send+0xd4/0x1d8 [ath10k_core] [<ffffffe6bbd3eed4>] ath10k_mgmt_over_wmi_tx_work+0x134/0x298 [ath10k_core] [<ffffffe6e78d5974>] process_scheduled_works+0x1ac/0x400 [<ffffffe6e78d60b8>] worker_thread+0x208/0x328 [<ffffffe6e78dc890>] kthread+0x100/0x1c0 [<ffffffe6e78166c0>] ret_from_fork+0x10/0x20 Free the memory during completion and cleanup to fix the leak. Protect the mgmt_pending_tx idr_remove() operation in ath10k_wmi_tlv_op_cleanup_mgmt_tx_send() using ar->data_lock similar to other instances. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 | |||||
| CVE-2024-50235 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: clear wdev->cqm_config pointer on free When we free wdev->cqm_config when unregistering, we also need to clear out the pointer since the same wdev/netdev may get re-registered in another network namespace, then destroyed later, running this code again, which results in a double-free. | |||||
| CVE-2024-50234 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.0 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlegacy: Clear stale interrupts before resuming device iwl4965 fails upon resume from hibernation on my laptop. The reason seems to be a stale interrupt which isn't being cleared out before interrupts are enabled. We end up with a race beween the resume trying to bring things back up, and the restart work (queued form the interrupt handler) trying to bring things down. Eventually the whole thing blows up. Fix the problem by clearing out any stale interrupts before interrupts get enabled during resume. Here's a debug log of the indicent: [ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000 [ 12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000 [ 12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio. [ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload [ 12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282 [ 12.052207] ieee80211 phy0: il4965_mac_start enter [ 12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff [ 12.052244] ieee80211 phy0: il4965_set_hw_ready hardware ready [ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions [ 12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S [ 12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm [ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm [ 12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK [ 12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations [ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up [ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done. [ 12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down [ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout [ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort [ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver [ 12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared [ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state [ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master [ 12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear. [ 12.058869] ieee80211 phy0: Hardware restart was requested [ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms. [ 16.132303] ------------[ cut here ]------------ [ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue. [ 16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143 [ 16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.132463] Workqueue: async async_run_entry_fn [ 16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132501] Code: da 02 00 0 ---truncated--- | |||||
| CVE-2024-50233 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg() In the ad9832_write_frequency() function, clk_get_rate() might return 0. This can lead to a division by zero when calling ad9832_calc_freqreg(). The check if (fout > (clk_get_rate(st->mclk) / 2)) does not protect against the case when fout is 0. The ad9832_write_frequency() function is called from ad9832_write(), and fout is derived from a text buffer, which can contain any value. | |||||
| CVE-2024-50232 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr() In the ad7124_write_raw() function, parameter val can potentially be zero. This may lead to a division by zero when DIV_ROUND_CLOSEST() is called within ad7124_set_channel_odr(). The ad7124_write_raw() function is invoked through the sequence: iio_write_channel_raw() -> iio_write_channel_attribute() -> iio_channel_write(), with no checks in place to ensure val is non-zero. | |||||