Vulnerabilities (CVE)

Filtered by vendor Linux Subscribe
Total 19806 CVE
CVE Vendors Products Updated CVSS v2 CVSS v3
CVE-2024-42231 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix calc_available_free_space() for zoned mode calc_available_free_space() returns the total size of metadata (or system) block groups, which can be allocated from unallocated disk space. The logic is wrong on zoned mode in two places. First, the calculation of data_chunk_size is wrong. We always allocate one zone as one chunk, and no partial allocation of a zone. So, we should use zone_size (= data_sinfo->chunk_size) as it is. Second, the result "avail" may not be zone aligned. Since we always allocate one zone as one chunk on zoned mode, returning non-zone size aligned bytes will result in less pressure on the async metadata reclaim process. This is serious for the nearly full state with a large zone size device. Allowing over-commit too much will result in less async reclaim work and end up in ENOSPC. We can align down to the zone size to avoid that.
CVE-2024-42230 1 Linux 1 Linux Kernel 2026-06-17 N/A 4.4 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries: Fix scv instruction crash with kexec kexec on pseries disables AIL (reloc_on_exc), required for scv instruction support, before other CPUs have been shut down. This means they can execute scv instructions after AIL is disabled, which causes an interrupt at an unexpected entry location that crashes the kernel. Change the kexec sequence to disable AIL after other CPUs have been brought down. As a refresher, the real-mode scv interrupt vector is 0x17000, and the fixed-location head code probably couldn't easily deal with implementing such high addresses so it was just decided not to support that interrupt at all.
CVE-2024-42229 1 Linux 1 Linux Kernel 2026-06-17 N/A 4.1 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: crypto: aead,cipher - zeroize key buffer after use I.G 9.7.B for FIPS 140-3 specifies that variables temporarily holding cryptographic information should be zeroized once they are no longer needed. Accomplish this by using kfree_sensitive for buffers that previously held the private key.
CVE-2024-42228 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.0 HIGH
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Using uninitialized value *size when calling amdgpu_vce_cs_reloc Initialize the size before calling amdgpu_vce_cs_reloc, such as case 0x03000001. V2: To really improve the handling we would actually need to have a separate value of 0xffffffff.(Christian)
CVE-2024-42227 1 Linux 1 Linux Kernel 2026-06-17 N/A 4.7 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix overlapping copy within dml_core_mode_programming [WHY] &mode_lib->mp.Watermark and &locals->Watermark are the same address. memcpy may lead to unexpected behavior. [HOW] memmove should be used.
CVE-2024-42223 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: media: dvb-frontends: tda10048: Fix integer overflow state->xtal_hz can be up to 16M, so it can overflow a 32 bit integer when multiplied by pll_mfactor. Create a new 64 bit variable to hold the calculations.
CVE-2024-42161 1 Linux 1 Linux Kernel 2026-06-17 N/A 6.3 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid uninitialized value in BPF_CORE_READ_BITFIELD [Changes from V1: - Use a default branch in the switch statement to initialize `val'.] GCC warns that `val' may be used uninitialized in the BPF_CRE_READ_BITFIELD macro, defined in bpf_core_read.h as: [...] unsigned long long val; \ [...] \ switch (__CORE_RELO(s, field, BYTE_SIZE)) { \ case 1: val = *(const unsigned char *)p; break; \ case 2: val = *(const unsigned short *)p; break; \ case 4: val = *(const unsigned int *)p; break; \ case 8: val = *(const unsigned long long *)p; break; \ } \ [...] val; \ } \ This patch adds a default entry in the switch statement that sets `val' to zero in order to avoid the warning, and random values to be used in case __builtin_preserve_field_info returns unexpected values for BPF_FIELD_BYTE_SIZE. Tested in bpf-next master. No regressions.
CVE-2024-42160 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: f2fs: check validation of fault attrs in f2fs_build_fault_attr() - It missed to check validation of fault attrs in parse_options(), let's fix to add check condition in f2fs_build_fault_attr(). - Use f2fs_build_fault_attr() in __sbi_store() to clean up code.
CVE-2024-42159 2 Debian, Linux 2 Debian Linux, Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Sanitise num_phys Information is stored in mr_sas_port->phy_mask, values larger then size of this field shouldn't be allowed.
CVE-2024-42157 1 Linux 1 Linux Kernel 2026-06-17 N/A 4.1 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: s390/pkey: Wipe sensitive data on failure Wipe sensitive data from stack also if the copy_to_user() fails.
CVE-2024-42153 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: i2c: pnx: Fix potential deadlock warning from del_timer_sync() call in isr When del_timer_sync() is called in an interrupt context it throws a warning because of potential deadlock. The timer is used only to exit from wait_for_completion() after a timeout so replacing the call with wait_for_completion_timeout() allows to remove the problematic timer and its related functions altogether.
CVE-2024-42151 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable Test case dummy_st_ops/dummy_init_ret_value passes NULL as the first parameter of the test_1() function. Mark this parameter as nullable to make verifier aware of such possibility. Otherwise, NULL check in the test_1() code: SEC("struct_ops/test_1") int BPF_PROG(test_1, struct bpf_dummy_ops_state *state) { if (!state) return ...; ... access state ... } Might be removed by verifier, thus triggering NULL pointer dereference under certain conditions.
CVE-2024-42150 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: net: txgbe: remove separate irq request for MSI and INTx When using MSI or INTx interrupts, request_irq() for pdev->irq will conflict with request_threaded_irq() for txgbe->misc.irq, to cause system crash. So remove txgbe_request_irq() for MSI/INTx case, and rename txgbe_request_msix_irqs() since it only request for queue irqs. Add wx->misc_irq_domain to determine whether the driver creates an IRQ domain and threaded request the IRQs.
CVE-2024-42149 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: fs: don't misleadingly warn during thaw operations The block device may have been frozen before it was claimed by a filesystem. Concurrently another process might try to mount that frozen block device and has temporarily claimed the block device for that purpose causing a concurrent fs_bdev_thaw() to end up here. The mounter is already about to abort mounting because they still saw an elevanted bdev->bd_fsfreeze_count so get_bdev_super() will return NULL in that case. For example, P1 calls dm_suspend() which calls into bdev_freeze() before the block device has been claimed by the filesystem. This brings bdev->bd_fsfreeze_count to 1 and no call into fs_bdev_freeze() is required. Now P2 tries to mount that frozen block device. It claims it and checks bdev->bd_fsfreeze_count. As it's elevated it aborts mounting. In the meantime P3 called dm_resume(). P3 sees that the block device is already claimed by a filesystem and calls into fs_bdev_thaw(). P3 takes a passive reference and realizes that the filesystem isn't ready yet. P3 puts itself to sleep to wait for the filesystem to become ready. P2 now puts the last active reference to the filesystem and marks it as dying. P3 gets woken, sees that the filesystem is dying and get_bdev_super() fails.
CVE-2024-42148 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: bnx2x: Fix multiple UBSAN array-index-out-of-bounds Fix UBSAN warnings that occur when using a system with 32 physical cpu cores or more, or when the user defines a number of Ethernet queues greater than or equal to FP_SB_MAX_E1x using the num_queues module parameter. Currently there is a read/write out of bounds that occurs on the array "struct stats_query_entry query" present inside the "bnx2x_fw_stats_req" struct in "drivers/net/ethernet/broadcom/bnx2x/bnx2x.h". Looking at the definition of the "struct stats_query_entry query" array: struct stats_query_entry query[FP_SB_MAX_E1x+ BNX2X_FIRST_QUEUE_QUERY_IDX]; FP_SB_MAX_E1x is defined as the maximum number of fast path interrupts and has a value of 16, while BNX2X_FIRST_QUEUE_QUERY_IDX has a value of 3 meaning the array has a total size of 19. Since accesses to "struct stats_query_entry query" are offset-ted by BNX2X_FIRST_QUEUE_QUERY_IDX, that means that the total number of Ethernet queues should not exceed FP_SB_MAX_E1x (16). However one of these queues is reserved for FCOE and thus the number of Ethernet queues should be set to [FP_SB_MAX_E1x -1] (15) if FCOE is enabled or [FP_SB_MAX_E1x] (16) if it is not. This is also described in a comment in the source code in drivers/net/ethernet/broadcom/bnx2x/bnx2x.h just above the Macro definition of FP_SB_MAX_E1x. Below is the part of this explanation that it important for this patch /* * The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is * control by the number of fast-path status blocks supported by the * device (HW/FW). Each fast-path status block (FP-SB) aka non-default * status block represents an independent interrupts context that can * serve a regular L2 networking queue. However special L2 queues such * as the FCoE queue do not require a FP-SB and other components like * the CNIC may consume FP-SB reducing the number of possible L2 queues * * If the maximum number of FP-SB available is X then: * a. If CNIC is supported it consumes 1 FP-SB thus the max number of * regular L2 queues is Y=X-1 * b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor) * c. If the FCoE L2 queue is supported the actual number of L2 queues * is Y+1 * d. The number of irqs (MSIX vectors) is either Y+1 (one extra for * slow-path interrupts) or Y+2 if CNIC is supported (one additional * FP interrupt context for the CNIC). * e. The number of HW context (CID count) is always X or X+1 if FCoE * L2 queue is supported. The cid for the FCoE L2 queue is always X. */ However this driver also supports NICs that use the E2 controller which can handle more queues due to having more FP-SB represented by FP_SB_MAX_E2. Looking at the commits when the E2 support was added, it was originally using the E1x parameters: commit f2e0899f0f27 ("bnx2x: Add 57712 support"). Back then FP_SB_MAX_E2 was set to 16 the same as E1x. However the driver was later updated to take full advantage of the E2 instead of having it be limited to the capabilities of the E1x. But as far as we can tell, the array "stats_query_entry query" was still limited to using the FP-SB available to the E1x cards as part of an oversignt when the driver was updated to take full advantage of the E2, and now with the driver being aware of the greater queue size supported by E2 NICs, it causes the UBSAN warnings seen in the stack traces below. This patch increases the size of the "stats_query_entry query" array by replacing FP_SB_MAX_E1x with FP_SB_MAX_E2 to be large enough to handle both types of NICs. Stack traces: UBSAN: array-index-out-of-bounds in drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1529:11 index 20 is out of range for type 'stats_query_entry [19]' CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 ---truncated---
CVE-2024-42147 1 Linux 1 Linux Kernel 2026-06-17 N/A 7.8 HIGH
In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/debugfs - Fix debugfs uninit process issue During the zip probe process, the debugfs failure does not stop the probe. When debugfs initialization fails, jumping to the error branch will also release regs, in addition to its own rollback operation. As a result, it may be released repeatedly during the regs uninit process. Therefore, the null check needs to be added to the regs uninit process.
CVE-2024-42146 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: drm/xe: Add outer runtime_pm protection to xe_live_ktest@xe_dma_buf Any kunit doing any memory access should get their own runtime_pm outer references since they don't use the standard driver API entries. In special this dma_buf from the same driver. Found by pre-merge CI on adding WARN calls for unprotected inner callers: <6> [318.639739] # xe_dma_buf_kunit: running xe_test_dmabuf_import_same_driver <4> [318.639957] ------------[ cut here ]------------ <4> [318.639967] xe 0000:4d:00.0: Missing outer runtime PM protection <4> [318.640049] WARNING: CPU: 117 PID: 3832 at drivers/gpu/drm/xe/xe_pm.c:533 xe_pm_runtime_get_noresume+0x48/0x60 [xe]
CVE-2024-42144 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/mediatek/lvts_thermal: Check NULL ptr on lvts_data Verify that lvts_data is not NULL before using it.
CVE-2024-42142 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: net/mlx5: E-switch, Create ingress ACL when needed Currently, ingress acl is used for three features. It is created only when vport metadata match and prio tag are enabled. But active-backup lag mode also uses it. It is independent of vport metadata match and prio tag. And vport metadata match can be disabled using the following devlink command: # devlink dev param set pci/0000:08:00.0 name esw_port_metadata \ value false cmode runtime If ingress acl is not created, will hit panic when creating drop rule for active-backup lag mode. If always create it, there will be about 5% performance degradation. Fix it by creating ingress acl when needed. If esw_port_metadata is true, ingress acl exists, then create drop rule using existing ingress acl. If esw_port_metadata is false, create ingress acl and then create drop rule.
CVE-2024-42141 1 Linux 1 Linux Kernel 2026-06-17 N/A 5.5 MEDIUM
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Check socket flag instead of hcon This fixes the following Smatch static checker warning: net/bluetooth/iso.c:1364 iso_sock_recvmsg() error: we previously assumed 'pi->conn->hcon' could be null (line 1359) net/bluetooth/iso.c 1347 static int iso_sock_recvmsg(struct socket *sock, struct msghdr *msg, 1348 size_t len, int flags) 1349 { 1350 struct sock *sk = sock->sk; 1351 struct iso_pinfo *pi = iso_pi(sk); 1352 1353 BT_DBG("sk %p", sk); 1354 1355 if (test_and_clear_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags)) { 1356 lock_sock(sk); 1357 switch (sk->sk_state) { 1358 case BT_CONNECT2: 1359 if (pi->conn->hcon && ^^^^^^^^^^^^^^ If ->hcon is NULL 1360 test_bit(HCI_CONN_PA_SYNC, &pi->conn->hcon->flags)) { 1361 iso_conn_big_sync(sk); 1362 sk->sk_state = BT_LISTEN; 1363 } else { --> 1364 iso_conn_defer_accept(pi->conn->hcon); ^^^^^^^^^^^^^^ then we're toast 1365 sk->sk_state = BT_CONFIG; 1366 } 1367 release_sock(sk); 1368 return 0; 1369 case BT_CONNECTED: 1370 if (test_bit(BT_SK_PA_SYNC,