Filtered by vendor Linux
Subscribe
Total
19806 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2024-43900 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: media: xc2028: avoid use-after-free in load_firmware_cb() syzkaller reported use-after-free in load_firmware_cb() [1]. The reason is because the module allocated a struct tuner in tuner_probe(), and then the module initialization failed, the struct tuner was released. A worker which created during module initialization accesses this struct tuner later, it caused use-after-free. The process is as follows: task-6504 worker_thread tuner_probe <= alloc dvb_frontend [2] ... request_firmware_nowait <= create a worker ... tuner_remove <= free dvb_frontend ... request_firmware_work_func <= the firmware is ready load_firmware_cb <= but now the dvb_frontend has been freed To fix the issue, check the dvd_frontend in load_firmware_cb(), if it is null, report a warning and just return. [1]: ================================================================== BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0 Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504 Call trace: load_firmware_cb+0x1310/0x17a0 request_firmware_work_func+0x128/0x220 process_one_work+0x770/0x1824 worker_thread+0x488/0xea0 kthread+0x300/0x430 ret_from_fork+0x10/0x20 Allocated by task 6504: kzalloc tuner_probe+0xb0/0x1430 i2c_device_probe+0x92c/0xaf0 really_probe+0x678/0xcd0 driver_probe_device+0x280/0x370 __device_attach_driver+0x220/0x330 bus_for_each_drv+0x134/0x1c0 __device_attach+0x1f4/0x410 device_initial_probe+0x20/0x30 bus_probe_device+0x184/0x200 device_add+0x924/0x12c0 device_register+0x24/0x30 i2c_new_device+0x4e0/0xc44 v4l2_i2c_new_subdev_board+0xbc/0x290 v4l2_i2c_new_subdev+0xc8/0x104 em28xx_v4l2_init+0x1dd0/0x3770 Freed by task 6504: kfree+0x238/0x4e4 tuner_remove+0x144/0x1c0 i2c_device_remove+0xc8/0x290 __device_release_driver+0x314/0x5fc device_release_driver+0x30/0x44 bus_remove_device+0x244/0x490 device_del+0x350/0x900 device_unregister+0x28/0xd0 i2c_unregister_device+0x174/0x1d0 v4l2_device_unregister+0x224/0x380 em28xx_v4l2_init+0x1d90/0x3770 The buggy address belongs to the object at ffff8000d7ca2000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 776 bytes inside of 2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800) The buggy address belongs to the page: page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0 flags: 0x7ff800000000100(slab) raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== [2] Actually, it is allocated for struct tuner, and dvb_frontend is inside. | |||||
| CVE-2024-43896 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: cs-amp-lib: Fix NULL pointer crash if efi.get_variable is NULL Call efi_rt_services_supported() to check that efi.get_variable exists before calling it. | |||||
| CVE-2024-43894 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/client: fix null pointer dereference in drm_client_modeset_probe In drm_client_modeset_probe(), the return value of drm_mode_duplicate() is assigned to modeset->mode, which will lead to a possible NULL pointer dereference on failure of drm_mode_duplicate(). Add a check to avoid npd. | |||||
| CVE-2024-43887 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/tcp: Disable TCP-AO static key after RCU grace period The lifetime of TCP-AO static_key is the same as the last tcp_ao_info. On the socket destruction tcp_ao_info ceases to be with RCU grace period, while tcp-ao static branch is currently deferred destructed. The static key definition is : DEFINE_STATIC_KEY_DEFERRED_FALSE(tcp_ao_needed, HZ); which means that if RCU grace period is delayed by more than a second and tcp_ao_needed is in the process of disablement, other CPUs may yet see tcp_ao_info which atent dead, but soon-to-be. And that breaks the assumption of static_key_fast_inc_not_disabled(). See the comment near the definition: > * The caller must make sure that the static key can't get disabled while > * in this function. It doesn't patch jump labels, only adds a user to > * an already enabled static key. Originally it was introduced in commit eb8c507296f6 ("jump_label: Prevent key->enabled int overflow"), which is needed for the atomic contexts, one of which would be the creation of a full socket from a request socket. In that atomic context, it's known by the presence of the key (md5/ao) that the static branch is already enabled. So, the ref counter for that static branch is just incremented instead of holding the proper mutex. static_key_fast_inc_not_disabled() is just a helper for such usage case. But it must not be used if the static branch could get disabled in parallel as it's not protected by jump_label_mutex and as a result, races with jump_label_update() implementation details. Happened on netdev test-bot[1], so not a theoretical issue: [] jump_label: Fatal kernel bug, unexpected op at tcp_inbound_hash+0x1a7/0x870 [ffffffffa8c4e9b7] (eb 50 0f 1f 44 != 66 90 0f 1f 00)) size:2 type:1 [] ------------[ cut here ]------------ [] kernel BUG at arch/x86/kernel/jump_label.c:73! [] Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI [] CPU: 3 PID: 243 Comm: kworker/3:3 Not tainted 6.10.0-virtme #1 [] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [] Workqueue: events jump_label_update_timeout [] RIP: 0010:__jump_label_patch+0x2f6/0x350 ... [] Call Trace: [] <TASK> [] arch_jump_label_transform_queue+0x6c/0x110 [] __jump_label_update+0xef/0x350 [] __static_key_slow_dec_cpuslocked.part.0+0x3c/0x60 [] jump_label_update_timeout+0x2c/0x40 [] process_one_work+0xe3b/0x1670 [] worker_thread+0x587/0xce0 [] kthread+0x28a/0x350 [] ret_from_fork+0x31/0x70 [] ret_from_fork_asm+0x1a/0x30 [] </TASK> [] Modules linked in: veth [] ---[ end trace 0000000000000000 ]--- [] RIP: 0010:__jump_label_patch+0x2f6/0x350 [1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao-dbg/results/696681/5-connect-deny-ipv6/stderr | |||||
| CVE-2024-43886 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Add null check in resource_log_pipe_topology_update [WHY] When switching from "Extend" to "Second Display Only" we sometimes call resource_get_otg_master_for_stream on a stream for the eDP, which is disconnected. This leads to a null pointer dereference. [HOW] Added a null check in dc_resource.c/resource_log_pipe_topology_update. | |||||
| CVE-2024-43884 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Add error handling to pair_device() hci_conn_params_add() never checks for a NULL value and could lead to a NULL pointer dereference causing a crash. Fixed by adding error handling in the function. | |||||
| CVE-2024-43876 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: PCI: rcar: Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() Avoid large backtrace, it is sufficient to warn the user that there has been a link problem. Either the link has failed and the system is in need of maintenance, or the link continues to work and user has been informed. The message from the warning can be looked up in the sources. This makes an actual link issue less verbose. First of all, this controller has a limitation in that the controller driver has to assist the hardware with transition to L1 link state by writing L1IATN to PMCTRL register, the L1 and L0 link state switching is not fully automatic on this controller. In case of an ASMedia ASM1062 PCIe SATA controller which does not support ASPM, on entry to suspend or during platform pm_test, the SATA controller enters D3hot state and the link enters L1 state. If the SATA controller wakes up before rcar_pcie_wakeup() was called and returns to D0, the link returns to L0 before the controller driver even started its transition to L1 link state. At this point, the SATA controller did send an PM_ENTER_L1 DLLP to the PCIe controller and the PCIe controller received it, and the PCIe controller did set PMSR PMEL1RX bit. Once rcar_pcie_wakeup() is called, if the link is already back in L0 state and PMEL1RX bit is set, the controller driver has no way to determine if it should perform the link transition to L1 state, or treat the link as if it is in L0 state. Currently the driver attempts to perform the transition to L1 link state unconditionally, which in this specific case fails with a PMSR L1FAEG poll timeout, however the link still works as it is already back in L0 state. Reduce this warning verbosity. In case the link is really broken, the rcar_pcie_config_access() would fail, otherwise it will succeed and any system with this controller and ASM1062 can suspend without generating a backtrace. | |||||
| CVE-2024-43875 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Clean up error handling in vpci_scan_bus() Smatch complains about inconsistent NULL checking in vpci_scan_bus(): drivers/pci/endpoint/functions/pci-epf-vntb.c:1024 vpci_scan_bus() error: we previously assumed 'vpci_bus' could be null (see line 1021) Instead of printing an error message and then crashing we should return an error code and clean up. Also the NULL check is reversed so it prints an error for success instead of failure. | |||||
| CVE-2024-43874 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix null pointer dereference in __sev_snp_shutdown_locked Fix a null pointer dereference induced by DEBUG_TEST_DRIVER_REMOVE. Return from __sev_snp_shutdown_locked() if the psp_device or the sev_device structs are not initialized. Without the fix, the driver will produce the following splat: ccp 0000:55:00.5: enabling device (0000 -> 0002) ccp 0000:55:00.5: sev enabled ccp 0000:55:00.5: psp enabled BUG: kernel NULL pointer dereference, address: 00000000000000f0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI CPU: 262 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc1+ #29 RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150 Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83 RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb2ea4014b808 RBP: ffffb2ea4014b7e8 R08: 0000000000000106 R09: 000000000003d9c0 R10: 0000000000000001 R11: ffffffffa39ff070 R12: ffff9e49d40590c8 R13: 0000000000000000 R14: ffffb2ea4014b808 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9e58b1e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000f0 CR3: 0000000418a3e001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x6f/0xb0 ? __die+0xcc/0xf0 ? page_fault_oops+0x330/0x3a0 ? save_trace+0x2a5/0x360 ? do_user_addr_fault+0x583/0x630 ? exc_page_fault+0x81/0x120 ? asm_exc_page_fault+0x2b/0x30 ? __sev_snp_shutdown_locked+0x2e/0x150 __sev_firmware_shutdown+0x349/0x5b0 ? pm_runtime_barrier+0x66/0xe0 sev_dev_destroy+0x34/0xb0 psp_dev_destroy+0x27/0x60 sp_destroy+0x39/0x90 sp_pci_remove+0x22/0x60 pci_device_remove+0x4e/0x110 really_probe+0x271/0x4e0 __driver_probe_device+0x8f/0x160 driver_probe_device+0x24/0x120 __driver_attach+0xc7/0x280 ? driver_attach+0x30/0x30 bus_for_each_dev+0x10d/0x130 driver_attach+0x22/0x30 bus_add_driver+0x171/0x2b0 ? unaccepted_memory_init_kdump+0x20/0x20 driver_register+0x67/0x100 __pci_register_driver+0x83/0x90 sp_pci_init+0x22/0x30 sp_mod_init+0x13/0x30 do_one_initcall+0xb8/0x290 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? stack_depot_save_flags+0x21e/0x6a0 ? local_clock+0x1c/0x60 ? stack_depot_save_flags+0x21e/0x6a0 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? __lock_acquire+0xd90/0xe30 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? __create_object+0x66/0x100 ? local_clock+0x1c/0x60 ? __create_object+0x66/0x100 ? parameq+0x1b/0x90 ? parse_one+0x6d/0x1d0 ? parse_args+0xd7/0x1f0 ? do_initcall_level+0x180/0x180 do_initcall_level+0xb0/0x180 do_initcalls+0x60/0xa0 ? kernel_init+0x1f/0x1d0 do_basic_setup+0x41/0x50 kernel_init_freeable+0x1ac/0x230 ? rest_init+0x1f0/0x1f0 kernel_init+0x1f/0x1d0 ? rest_init+0x1f0/0x1f0 ret_from_fork+0x3d/0x50 ? rest_init+0x1f0/0x1f0 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: CR2: 00000000000000f0 ---[ end trace 0000000000000000 ]--- RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150 Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83 RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000 RDX: 0000000 ---truncated--- | |||||
| CVE-2024-43873 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: vhost/vsock: always initialize seqpacket_allow There are two issues around seqpacket_allow: 1. seqpacket_allow is not initialized when socket is created. Thus if features are never set, it will be read uninitialized. 2. if VIRTIO_VSOCK_F_SEQPACKET is set and then cleared, then seqpacket_allow will not be cleared appropriately (existing apps I know about don't usually do this but it's legal and there's no way to be sure no one relies on this). To fix: - initialize seqpacket_allow after allocation - set it unconditionally in set_features | |||||
| CVE-2024-43870 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix event leak upon exit When a task is scheduled out, pending sigtrap deliveries are deferred to the target task upon resume to userspace via task_work. However failures while adding an event's callback to the task_work engine are ignored. And since the last call for events exit happen after task work is eventually closed, there is a small window during which pending sigtrap can be queued though ignored, leaking the event refcount addition such as in the following scenario: TASK A ----- do_exit() exit_task_work(tsk); <IRQ> perf_event_overflow() event->pending_sigtrap = pending_id; irq_work_queue(&event->pending_irq); </IRQ> =========> PREEMPTION: TASK A -> TASK B event_sched_out() event->pending_sigtrap = 0; atomic_long_inc_not_zero(&event->refcount) // FAILS: task work has exited task_work_add(&event->pending_task) [...] <IRQ WORK> perf_pending_irq() // early return: event->oncpu = -1 </IRQ WORK> [...] =========> TASK B -> TASK A perf_event_exit_task(tsk) perf_event_exit_event() free_event() WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1) // leak event due to unexpected refcount == 2 As a result the event is never released while the task exits. Fix this with appropriate task_work_add()'s error handling. | |||||
| CVE-2024-43869 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix event leak upon exec and file release The perf pending task work is never waited upon the matching event release. In the case of a child event, released via free_event() directly, this can potentially result in a leaked event, such as in the following scenario that doesn't even require a weak IRQ work implementation to trigger: schedule() prepare_task_switch() =======> <NMI> perf_event_overflow() event->pending_sigtrap = ... irq_work_queue(&event->pending_irq) <======= </NMI> perf_event_task_sched_out() event_sched_out() event->pending_sigtrap = 0; atomic_long_inc_not_zero(&event->refcount) task_work_add(&event->pending_task) finish_lock_switch() =======> <IRQ> perf_pending_irq() //do nothing, rely on pending task work <======= </IRQ> begin_new_exec() perf_event_exit_task() perf_event_exit_event() // If is child event free_event() WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1) // event is leaked Similar scenarios can also happen with perf_event_remove_on_exec() or simply against concurrent perf_event_release(). Fix this with synchonizing against the possibly remaining pending task work while freeing the event, just like is done with remaining pending IRQ work. This means that the pending task callback neither need nor should hold a reference to the event, preventing it from ever beeing freed. | |||||
| CVE-2024-43868 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: riscv/purgatory: align riscv_kernel_entry When alignment handling is delegated to the kernel, everything must be word-aligned in purgatory, since the trap handler is then set to the kexec one. Without the alignment, hitting the exception would ultimately crash. On other occasions, the kernel's handler would take care of exceptions. This has been tested on a JH7110 SoC with oreboot and its SBI delegating unaligned access exceptions and the kernel configured to handle them. | |||||
| CVE-2024-43867 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: prime: fix refcount underflow Calling nouveau_bo_ref() on a nouveau_bo without initializing it (and hence the backing ttm_bo) leads to a refcount underflow. Instead of calling nouveau_bo_ref() in the unwind path of drm_gem_object_init(), clean things up manually. (cherry picked from commit 1b93f3e89d03cfc576636e195466a0d728ad8de5) | |||||
| CVE-2024-43866 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Always drain health in shutdown callback There is no point in recovery during device shutdown. if health work started need to wait for it to avoid races and NULL pointer access. Hence, drain health WQ on shutdown callback. | |||||
| CVE-2024-43865 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: s390/fpu: Re-add exception handling in load_fpu_state() With the recent rewrite of the fpu code exception handling for the lfpc instruction within load_fpu_state() was erroneously removed. Add it again to prevent that loading invalid floating point register values cause an unhandled specification exception. | |||||
| CVE-2024-43863 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix a deadlock in dma buf fence polling Introduce a version of the fence ops that on release doesn't remove the fence from the pending list, and thus doesn't require a lock to fix poll->fence wait->fence unref deadlocks. vmwgfx overwrites the wait callback to iterate over the list of all fences and update their status, to do that it holds a lock to prevent the list modifcations from other threads. The fence destroy callback both deletes the fence and removes it from the list of pending fences, for which it holds a lock. dma buf polling cb unrefs a fence after it's been signaled: so the poll calls the wait, which signals the fences, which are being destroyed. The destruction tries to acquire the lock on the pending fences list which it can never get because it's held by the wait from which it was called. Old bug, but not a lot of userspace apps were using dma-buf polling interfaces. Fix those, in particular this fixes KDE stalls/deadlock. | |||||
| CVE-2024-43862 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: wan: fsl_qmc_hdlc: Convert carrier_lock spinlock to a mutex The carrier_lock spinlock protects the carrier detection. While it is held, framer_get_status() is called which in turn takes a mutex. This is not correct and can lead to a deadlock. A run with PROVE_LOCKING enabled detected the issue: [ BUG: Invalid wait context ] ... c204ddbc (&framer->mutex){+.+.}-{3:3}, at: framer_get_status+0x40/0x78 other info that might help us debug this: context-{4:4} 2 locks held by ifconfig/146: #0: c0926a38 (rtnl_mutex){+.+.}-{3:3}, at: devinet_ioctl+0x12c/0x664 #1: c2006a40 (&qmc_hdlc->carrier_lock){....}-{2:2}, at: qmc_hdlc_framer_set_carrier+0x30/0x98 Avoid the spinlock usage and convert carrier_lock to a mutex. | |||||
| CVE-2024-43861 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: qmi_wwan: fix memory leak for not ip packets Free the unused skb when not ip packets arrive. | |||||
| CVE-2024-43860 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: imx_rproc: Skip over memory region when node value is NULL In imx_rproc_addr_init() "nph = of_count_phandle_with_args()" just counts number of phandles. But phandles may be empty. So of_parse_phandle() in the parsing loop (0 < a < nph) may return NULL which is later dereferenced. Adjust this issue by adding NULL-return check. Found by Linux Verification Center (linuxtesting.org) with SVACE. [Fixed title to fit within the prescribed 70-75 charcters] | |||||
