Total
397434 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-21749 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: rose: lock the socket in rose_bind() syzbot reported a soft lockup in rose_loopback_timer(), with a repro calling bind() from multiple threads. rose_bind() must lock the socket to avoid this issue. | |||||
| CVE-2025-21747 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/ast: astdp: Fix timeout for enabling video signal The ASTDP transmitter sometimes takes up to 1 second for enabling the video signal, while the timeout is only 200 msec. This results in a kernel error message. Increase the timeout to 1 second. An example of the error message is shown below. [ 697.084433] ------------[ cut here ]------------ [ 697.091115] ast 0000:02:00.0: [drm] drm_WARN_ON(!__ast_dp_wait_enable(ast, enabled)) [ 697.091233] WARNING: CPU: 1 PID: 160 at drivers/gpu/drm/ast/ast_dp.c:232 ast_dp_set_enable+0x123/0x140 [ast] [...] [ 697.272469] RIP: 0010:ast_dp_set_enable+0x123/0x140 [ast] [...] [ 697.415283] Call Trace: [ 697.420727] <TASK> [ 697.425908] ? show_trace_log_lvl+0x196/0x2c0 [ 697.433304] ? show_trace_log_lvl+0x196/0x2c0 [ 697.440693] ? drm_atomic_helper_commit_modeset_enables+0x30a/0x470 [ 697.450115] ? ast_dp_set_enable+0x123/0x140 [ast] [ 697.458059] ? __warn.cold+0xaf/0xca [ 697.464713] ? ast_dp_set_enable+0x123/0x140 [ast] [ 697.472633] ? report_bug+0x134/0x1d0 [ 697.479544] ? handle_bug+0x58/0x90 [ 697.486127] ? exc_invalid_op+0x13/0x40 [ 697.492975] ? asm_exc_invalid_op+0x16/0x20 [ 697.500224] ? preempt_count_sub+0x14/0xc0 [ 697.507473] ? ast_dp_set_enable+0x123/0x140 [ast] [ 697.515377] ? ast_dp_set_enable+0x123/0x140 [ast] [ 697.523227] drm_atomic_helper_commit_modeset_enables+0x30a/0x470 [ 697.532388] drm_atomic_helper_commit_tail+0x58/0x90 [ 697.540400] ast_mode_config_helper_atomic_commit_tail+0x30/0x40 [ast] [ 697.550009] commit_tail+0xfe/0x1d0 [ 697.556547] drm_atomic_helper_commit+0x198/0x1c0 This is a cosmetical problem. Enabling the video signal still works even with the error message. The problem has always been present, but only recent versions of the ast driver warn about missing the timeout. | |||||
| CVE-2025-21746 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics - fix crash when enabling pass-through port When enabling a pass-through port an interrupt might come before psmouse driver binds to the pass-through port. However synaptics sub-driver tries to access psmouse instance presumably associated with the pass-through port to figure out if only 1 byte of response or entire protocol packet needs to be forwarded to the pass-through port and may crash if psmouse instance has not been attached to the port yet. Fix the crash by introducing open() and close() methods for the port and check if the port is open before trying to access psmouse instance. Because psmouse calls serio_open() only after attaching psmouse instance to serio port instance this prevents the potential crash. | |||||
| CVE-2025-21744 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize() On removal of the device or unloading of the kernel module a potential NULL pointer dereference occurs. The following sequence deletes the interface: brcmf_detach() brcmf_remove_interface() brcmf_del_if() Inside the brcmf_del_if() function the drvr->if2bss[ifidx] is updated to BRCMF_BSSIDX_INVALID (-1) if the bsscfgidx matches. After brcmf_remove_interface() call the brcmf_proto_detach() function is called providing the following sequence: brcmf_detach() brcmf_proto_detach() brcmf_proto_msgbuf_detach() brcmf_flowring_detach() brcmf_msgbuf_delete_flowring() brcmf_msgbuf_remove_flowring() brcmf_flowring_delete() brcmf_get_ifp() brcmf_txfinalize() Since brcmf_get_ip() can and actually will return NULL in this case the call to brcmf_txfinalize() will result in a NULL pointer dereference inside brcmf_txfinalize() when trying to update ifp->ndev->stats.tx_errors. This will only happen if a flowring still has an skb. Although the NULL pointer dereference has only been seen when trying to update the tx statistic, all other uses of the ifp pointer have been guarded as well with an early return if ifp is NULL. | |||||
| CVE-2025-21743 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: fix possible overflow in DPE length check Originally, it was possible for the DPE length check to overflow if wDatagramIndex + wDatagramLength > U16_MAX. This could lead to an OoB read. Move the wDatagramIndex term to the other side of the inequality. An existing condition ensures that wDatagramIndex < urb->actual_length. | |||||
| CVE-2025-21742 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: use static NDP16 location in URB Original code allowed for the start of NDP16 to be anywhere within the URB based on the `wNdpIndex` value in NTH16. Only the start position of NDP16 was checked, so it was possible for even the fixed-length part of NDP16 to extend past the end of URB, leading to an out-of-bounds read. On iOS devices, the NDP16 header always directly follows NTH16. Rely on and check for this specific format. This, along with NCM-specific minimal URB length check that already exists, will ensure that the fixed-length part of NDP16 plus a set amount of DPEs fit within the URB. Note that this commit alone does not fully address the OoB read. The limit on the amount of DPEs needs to be enforced separately. | |||||
| CVE-2025-21741 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.1 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: usbnet: ipheth: fix DPE OoB read Fix an out-of-bounds DPE read, limit the number of processed DPEs to the amount that fits into the fixed-size NDP16 header. | |||||
| CVE-2025-21739 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix use-after free in init error and remove paths devm_blk_crypto_profile_init() registers a cleanup handler to run when the associated (platform-) device is being released. For UFS, the crypto private data and pointers are stored as part of the ufs_hba's data structure 'struct ufs_hba::crypto_profile'. This structure is allocated as part of the underlying ufshcd and therefore Scsi_host allocation. During driver release or during error handling in ufshcd_pltfrm_init(), this structure is released as part of ufshcd_dealloc_host() before the (platform-) device associated with the crypto call above is released. Once this device is released, the crypto cleanup code will run, using the just-released 'struct ufs_hba::crypto_profile'. This causes a use-after-free situation: Call trace: kfree+0x60/0x2d8 (P) kvfree+0x44/0x60 blk_crypto_profile_destroy_callback+0x28/0x70 devm_action_release+0x1c/0x30 release_nodes+0x6c/0x108 devres_release_all+0x98/0x100 device_unbind_cleanup+0x20/0x70 really_probe+0x218/0x2d0 In other words, the initialisation code flow is: platform-device probe ufshcd_pltfrm_init() ufshcd_alloc_host() scsi_host_alloc() allocation of struct ufs_hba creation of scsi-host devices devm_blk_crypto_profile_init() devm registration of cleanup handler using platform-device and during error handling of ufshcd_pltfrm_init() or during driver removal: ufshcd_dealloc_host() scsi_host_put() put_device(scsi-host) release of struct ufs_hba put_device(platform-device) crypto cleanup handler To fix this use-after free, change ufshcd_alloc_host() to register a devres action to automatically cleanup the underlying SCSI device on ufshcd destruction, without requiring explicit calls to ufshcd_dealloc_host(). This way: * the crypto profile and all other ufs_hba-owned resources are destroyed before SCSI (as they've been registered after) * a memleak is plugged in tc-dwc-g210-pci.c remove() as a side-effect * EXPORT_SYMBOL_GPL(ufshcd_dealloc_host) can be removed fully as it's not needed anymore * no future drivers using ufshcd_alloc_host() could ever forget adding the cleanup | |||||
| CVE-2025-21737 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leak in ceph_mds_auth_match() We now free the temporary target path substring allocation on every possible branch, instead of omitting the default branch. In some cases, a memory leak occured, which could rapidly crash the system (depending on how many file accesses were attempted). This was detected in production because it caused a continuous memory growth, eventually triggering kernel OOM and completely hard-locking the kernel. Relevant kmemleak stacktrace: unreferenced object 0xffff888131e69900 (size 128): comm "git", pid 66104, jiffies 4295435999 hex dump (first 32 bytes): 76 6f 6c 75 6d 65 73 2f 63 6f 6e 74 61 69 6e 65 volumes/containe 72 73 2f 67 69 74 65 61 2f 67 69 74 65 61 2f 67 rs/gitea/gitea/g backtrace (crc 2f3bb450): [<ffffffffaa68fb49>] __kmalloc_noprof+0x359/0x510 [<ffffffffc32bf1df>] ceph_mds_check_access+0x5bf/0x14e0 [ceph] [<ffffffffc3235722>] ceph_open+0x312/0xd80 [ceph] [<ffffffffaa7dd786>] do_dentry_open+0x456/0x1120 [<ffffffffaa7e3729>] vfs_open+0x79/0x360 [<ffffffffaa832875>] path_openat+0x1de5/0x4390 [<ffffffffaa834fcc>] do_filp_open+0x19c/0x3c0 [<ffffffffaa7e44a1>] do_sys_openat2+0x141/0x180 [<ffffffffaa7e4945>] __x64_sys_open+0xe5/0x1a0 [<ffffffffac2cc2f7>] do_syscall_64+0xb7/0x210 [<ffffffffac400130>] entry_SYSCALL_64_after_hwframe+0x77/0x7f It can be triggered by mouting a subdirectory of a CephFS filesystem, and then trying to access files on this subdirectory with an auth token using a path-scoped capability: $ ceph auth get client.services [client.services] key = REDACTED caps mds = "allow rw fsname=cephfs path=/volumes/" caps mon = "allow r fsname=cephfs" caps osd = "allow rw tag cephfs data=cephfs" $ cat /proc/self/mounts services@[REDACTED].cephfs=/volumes/containers /ceph/containers ceph rw,noatime,name=services,secret=<hidden>,ms_mode=prefer-crc,mount_timeout=300,acl,mon_addr=[REDACTED]:3300,recover_session=clean 0 0 $ seq 1 1000000 | xargs -P32 --replace={} touch /ceph/containers/file-{} && \ seq 1 1000000 | xargs -P32 --replace={} cat /ceph/containers/file-{} [ idryomov: combine if statements, rename rc to path_matched and make it a bool, formatting ] | |||||
| CVE-2025-21736 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix possible int overflows in nilfs_fiemap() Since nilfs_bmap_lookup_contig() in nilfs_fiemap() calculates its result by being prepared to go through potentially maxblocks == INT_MAX blocks, the value in n may experience an overflow caused by left shift of blkbits. While it is extremely unlikely to occur, play it safe and cast right hand expression to wider type to mitigate the issue. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. | |||||
| CVE-2025-21733 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: tracing/osnoise: Fix resetting of tracepoints If a timerlat tracer is started with the osnoise option OSNOISE_WORKLOAD disabled, but then that option is enabled and timerlat is removed, the tracepoints that were enabled on timerlat registration do not get disabled. If the option is disabled again and timelat is started, then it triggers a warning in the tracepoint code due to registering the tracepoint again without ever disabling it. Do not use the same user space defined options to know to disable the tracepoints when timerlat is removed. Instead, set a global flag when it is enabled and use that flag to know to disable the events. ~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options ~# echo timerlat > /sys/kernel/tracing/current_tracer ~# echo OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options ~# echo nop > /sys/kernel/tracing/current_tracer ~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options ~# echo timerlat > /sys/kernel/tracing/current_tracer Triggers: ------------[ cut here ]------------ WARNING: CPU: 6 PID: 1337 at kernel/tracepoint.c:294 tracepoint_add_func+0x3b6/0x3f0 Modules linked in: CPU: 6 UID: 0 PID: 1337 Comm: rtla Not tainted 6.13.0-rc4-test-00018-ga867c441128e-dirty #73 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:tracepoint_add_func+0x3b6/0x3f0 Code: 48 8b 53 28 48 8b 73 20 4c 89 04 24 e8 23 59 11 00 4c 8b 04 24 e9 36 fe ff ff 0f 0b b8 ea ff ff ff 45 84 e4 0f 84 68 fe ff ff <0f> 0b e9 61 fe ff ff 48 8b 7b 18 48 85 ff 0f 84 4f ff ff ff 49 8b RSP: 0018:ffffb9b003a87ca0 EFLAGS: 00010202 RAX: 00000000ffffffef RBX: ffffffff92f30860 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9bf59e91ccd0 RDI: ffffffff913b6410 RBP: 000000000000000a R08: 00000000000005c7 R09: 0000000000000002 R10: ffffb9b003a87ce0 R11: 0000000000000002 R12: 0000000000000001 R13: ffffb9b003a87ce0 R14: ffffffffffffffef R15: 0000000000000008 FS: 00007fce81209240(0000) GS:ffff9bf6fdd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055e99b728000 CR3: 00000001277c0002 CR4: 0000000000172ef0 Call Trace: <TASK> ? __warn.cold+0xb7/0x14d ? tracepoint_add_func+0x3b6/0x3f0 ? report_bug+0xea/0x170 ? handle_bug+0x58/0x90 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __pfx_trace_sched_migrate_callback+0x10/0x10 ? tracepoint_add_func+0x3b6/0x3f0 ? __pfx_trace_sched_migrate_callback+0x10/0x10 ? __pfx_trace_sched_migrate_callback+0x10/0x10 tracepoint_probe_register+0x78/0xb0 ? __pfx_trace_sched_migrate_callback+0x10/0x10 osnoise_workload_start+0x2b5/0x370 timerlat_tracer_init+0x76/0x1b0 tracing_set_tracer+0x244/0x400 tracing_set_trace_write+0xa0/0xe0 vfs_write+0xfc/0x570 ? do_sys_openat2+0x9c/0xe0 ksys_write+0x72/0xf0 do_syscall_64+0x79/0x1c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e | |||||
| CVE-2025-21732 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error This patch addresses a race condition for an ODP MR that can result in a CQE with an error on the UMR QP. During the __mlx5_ib_dereg_mr() flow, the following sequence of calls occurs: mlx5_revoke_mr() mlx5r_umr_revoke_mr() mlx5r_umr_post_send_wait() At this point, the lkey is freed from the hardware's perspective. However, concurrently, mlx5_ib_invalidate_range() might be triggered by another task attempting to invalidate a range for the same freed lkey. This task will: - Acquire the umem_odp->umem_mutex lock. - Call mlx5r_umr_update_xlt() on the UMR QP. - Since the lkey has already been freed, this can lead to a CQE error, causing the UMR QP to enter an error state [1]. To resolve this race condition, the umem_odp->umem_mutex lock is now also acquired as part of the mlx5_revoke_mr() scope. Upon successful revoke, we set umem_odp->private which points to that MR to NULL, preventing any further invalidation attempts on its lkey. [1] From dmesg: infiniband rocep8s0f0: dump_cqe:277:(pid 0): WC error: 6, Message: memory bind operation error cqe_dump: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 cqe_dump: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 cqe_dump: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 cqe_dump: 00000030: 00 00 00 00 08 00 78 06 25 00 11 b9 00 0e dd d2 WARNING: CPU: 15 PID: 1506 at drivers/infiniband/hw/mlx5/umr.c:394 mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib] Modules linked in: ip6table_mangle ip6table_natip6table_filter ip6_tables iptable_mangle xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core CPU: 15 UID: 0 PID: 1506 Comm: ibv_rc_pingpong Not tainted 6.12.0-rc7+ #1626 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib] [..] Call Trace: <TASK> mlx5r_umr_update_xlt+0x23c/0x3e0 [mlx5_ib] mlx5_ib_invalidate_range+0x2e1/0x330 [mlx5_ib] __mmu_notifier_invalidate_range_start+0x1e1/0x240 zap_page_range_single+0xf1/0x1a0 madvise_vma_behavior+0x677/0x6e0 do_madvise+0x1a2/0x4b0 __x64_sys_madvise+0x25/0x30 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e | |||||
| CVE-2025-21729 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: fix race between cancel_hw_scan and hw_scan completion The rtwdev->scanning flag isn't protected by mutex originally, so cancel_hw_scan can pass the condition, but suddenly hw_scan completion unset the flag and calls ieee80211_scan_completed() that will free local->hw_scan_req. Then, cancel_hw_scan raises null-ptr-deref and use-after-free. Fix it by moving the check condition to where protected by mutex. KASAN: null-ptr-deref in range [0x0000000000000088-0x000000000000008f] CPU: 2 PID: 6922 Comm: kworker/2:2 Tainted: G OE Hardware name: LENOVO 2356AD1/2356AD1, BIOS G7ETB6WW (2.76 ) 09/10/2019 Workqueue: events cfg80211_conn_work [cfg80211] RIP: 0010:rtw89_fw_h2c_scan_offload_be+0xc33/0x13c3 [rtw89_core] Code: 00 45 89 6c 24 1c 0f 85 23 01 00 00 48 8b 85 20 ff ff ff 48 8d RSP: 0018:ffff88811fd9f068 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff88811fd9f258 RCX: 0000000000000001 RDX: 0000000000000011 RSI: 0000000000000001 RDI: 0000000000000089 RBP: ffff88811fd9f170 R08: 0000000000000000 R09: 0000000000000000 R10: ffff88811fd9f108 R11: 0000000000000000 R12: ffff88810e47f960 R13: 0000000000000000 R14: 000000000000ffff R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8881d6f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007531dfca55b0 CR3: 00000001be296004 CR4: 00000000001706e0 Call Trace: <TASK> ? show_regs+0x61/0x73 ? __die_body+0x20/0x73 ? die_addr+0x4f/0x7b ? exc_general_protection+0x191/0x1db ? asm_exc_general_protection+0x27/0x30 ? rtw89_fw_h2c_scan_offload_be+0xc33/0x13c3 [rtw89_core] ? rtw89_fw_h2c_scan_offload_be+0x458/0x13c3 [rtw89_core] ? __pfx_rtw89_fw_h2c_scan_offload_be+0x10/0x10 [rtw89_core] ? do_raw_spin_lock+0x75/0xdb ? __pfx_do_raw_spin_lock+0x10/0x10 rtw89_hw_scan_offload+0xb5e/0xbf7 [rtw89_core] ? _raw_spin_unlock+0xe/0x24 ? __mutex_lock.constprop.0+0x40c/0x471 ? __pfx_rtw89_hw_scan_offload+0x10/0x10 [rtw89_core] ? __mutex_lock_slowpath+0x13/0x1f ? mutex_lock+0xa2/0xdc ? __pfx_mutex_lock+0x10/0x10 rtw89_hw_scan_abort+0x58/0xb7 [rtw89_core] rtw89_ops_cancel_hw_scan+0x120/0x13b [rtw89_core] ieee80211_scan_cancel+0x468/0x4d0 [mac80211] ieee80211_prep_connection+0x858/0x899 [mac80211] ieee80211_mgd_auth+0xbea/0xdde [mac80211] ? __pfx_ieee80211_mgd_auth+0x10/0x10 [mac80211] ? cfg80211_find_elem+0x15/0x29 [cfg80211] ? is_bss+0x1b7/0x1d7 [cfg80211] ieee80211_auth+0x18/0x27 [mac80211] cfg80211_mlme_auth+0x3bb/0x3e7 [cfg80211] cfg80211_conn_do_work+0x410/0xb81 [cfg80211] ? __pfx_cfg80211_conn_do_work+0x10/0x10 [cfg80211] ? __kasan_check_read+0x11/0x1f ? psi_group_change+0x8bc/0x944 ? __kasan_check_write+0x14/0x22 ? mutex_lock+0x8e/0xdc ? __pfx_mutex_lock+0x10/0x10 ? __pfx___radix_tree_lookup+0x10/0x10 cfg80211_conn_work+0x245/0x34d [cfg80211] ? __pfx_cfg80211_conn_work+0x10/0x10 [cfg80211] ? update_cfs_rq_load_avg+0x3bc/0x3d7 ? sched_clock_noinstr+0x9/0x1a ? sched_clock+0x10/0x24 ? sched_clock_cpu+0x7e/0x42e ? newidle_balance+0x796/0x937 ? __pfx_sched_clock_cpu+0x10/0x10 ? __pfx_newidle_balance+0x10/0x10 ? __kasan_check_read+0x11/0x1f ? psi_group_change+0x8bc/0x944 ? _raw_spin_unlock+0xe/0x24 ? raw_spin_rq_unlock+0x47/0x54 ? raw_spin_rq_unlock_irq+0x9/0x1f ? finish_task_switch.isra.0+0x347/0x586 ? __schedule+0x27bf/0x2892 ? mutex_unlock+0x80/0xd0 ? do_raw_spin_lock+0x75/0xdb ? __pfx___schedule+0x10/0x10 process_scheduled_works+0x58c/0x821 worker_thread+0x4c7/0x586 ? __kasan_check_read+0x11/0x1f kthread+0x285/0x294 ? __pfx_worker_thread+0x10/0x10 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x6f ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> | |||||
| CVE-2025-21728 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Send signals asynchronously if !preemptible BPF programs can execute in all kinds of contexts and when a program running in a non-preemptible context uses the bpf_send_signal() kfunc, it will cause issues because this kfunc can sleep. Change `irqs_disabled()` to `!preemptible()`. | |||||
| CVE-2025-21727 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: padata: fix UAF in padata_reorder A bug was found when run ltp test: BUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0 Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206 CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+ Workqueue: pdecrypt_parallel padata_parallel_worker Call Trace: <TASK> dump_stack_lvl+0x32/0x50 print_address_description.constprop.0+0x6b/0x3d0 print_report+0xdd/0x2c0 kasan_report+0xa5/0xd0 padata_find_next+0x29/0x1a0 padata_reorder+0x131/0x220 padata_parallel_worker+0x3d/0xc0 process_one_work+0x2ec/0x5a0 If 'mdelay(10)' is added before calling 'padata_find_next' in the 'padata_reorder' function, this issue could be reproduced easily with ltp test (pcrypt_aead01). This can be explained as bellow: pcrypt_aead_encrypt ... padata_do_parallel refcount_inc(&pd->refcnt); // add refcnt ... padata_do_serial padata_reorder // pd while (1) { padata_find_next(pd, true); // using pd queue_work_on ... padata_serial_worker crypto_del_alg padata_put_pd_cnt // sub refcnt padata_free_shell padata_put_pd(ps->pd); // pd is freed // loop again, but pd is freed // call padata_find_next, UAF } In the padata_reorder function, when it loops in 'while', if the alg is deleted, the refcnt may be decreased to 0 before entering 'padata_find_next', which leads to UAF. As mentioned in [1], do_serial is supposed to be called with BHs disabled and always happen under RCU protection, to address this issue, add synchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls to finish. [1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/ [2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/ | |||||
| CVE-2025-21726 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: padata: avoid UAF for reorder_work Although the previous patch can avoid ps and ps UAF for _do_serial, it can not avoid potential UAF issue for reorder_work. This issue can happen just as below: crypto_request crypto_request crypto_del_alg padata_do_serial ... padata_reorder // processes all remaining // requests then breaks while (1) { if (!padata) break; ... } padata_do_serial // new request added list_add // sees the new request queue_work(reorder_work) padata_reorder queue_work_on(squeue->work) ... <kworker context> padata_serial_worker // completes new request, // no more outstanding // requests crypto_del_alg // free pd <kworker context> invoke_padata_reorder // UAF of pd To avoid UAF for 'reorder_work', get 'pd' ref before put 'reorder_work' into the 'serial_wq' and put 'pd' ref until the 'serial_wq' finish. | |||||
| CVE-2025-21724 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: iommufd/iova_bitmap: Fix shift-out-of-bounds in iova_bitmap_offset_to_index() Resolve a UBSAN shift-out-of-bounds issue in iova_bitmap_offset_to_index() where shifting the constant "1" (of type int) by bitmap->mapped.pgshift (an unsigned long value) could result in undefined behavior. The constant "1" defaults to a 32-bit "int", and when "pgshift" exceeds 31 (e.g., pgshift = 63) the shift operation overflows, as the result cannot be represented in a 32-bit type. To resolve this, the constant is updated to "1UL", promoting it to an unsigned long type to match the operand's type. | |||||
| CVE-2025-21723 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix possible crash when setting up bsg fails If bsg_setup_queue() fails, the bsg_queue is assigned a non-NULL value. Consequently, in mpi3mr_bsg_exit(), the condition "if(!mrioc->bsg_queue)" will not be satisfied, preventing execution from entering bsg_remove_queue(), which could lead to the following crash: BUG: kernel NULL pointer dereference, address: 000000000000041c Call Trace: <TASK> mpi3mr_bsg_exit+0x1f/0x50 [mpi3mr] mpi3mr_remove+0x6f/0x340 [mpi3mr] pci_device_remove+0x3f/0xb0 device_release_driver_internal+0x19d/0x220 unbind_store+0xa4/0xb0 kernfs_fop_write_iter+0x11f/0x200 vfs_write+0x1fc/0x3e0 ksys_write+0x67/0xe0 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x78/0xe2 | |||||
| CVE-2025-21722 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: do not force clear folio if buffer is referenced Patch series "nilfs2: protect busy buffer heads from being force-cleared". This series fixes the buffer head state inconsistency issues reported by syzbot that occurs when the filesystem is corrupted and falls back to read-only, and the associated buffer head use-after-free issue. This patch (of 2): Syzbot has reported that after nilfs2 detects filesystem corruption and falls back to read-only, inconsistencies in the buffer state may occur. One of the inconsistencies is that when nilfs2 calls mark_buffer_dirty() to set a data or metadata buffer as dirty, but it detects that the buffer is not in the uptodate state: WARNING: CPU: 0 PID: 6049 at fs/buffer.c:1177 mark_buffer_dirty+0x2e5/0x520 fs/buffer.c:1177 ... Call Trace: <TASK> nilfs_palloc_commit_alloc_entry+0x4b/0x160 fs/nilfs2/alloc.c:598 nilfs_ifile_create_inode+0x1dd/0x3a0 fs/nilfs2/ifile.c:73 nilfs_new_inode+0x254/0x830 fs/nilfs2/inode.c:344 nilfs_mkdir+0x10d/0x340 fs/nilfs2/namei.c:218 vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257 do_mkdirat+0x264/0x3a0 fs/namei.c:4280 __do_sys_mkdirat fs/namei.c:4295 [inline] __se_sys_mkdirat fs/namei.c:4293 [inline] __x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The other is when nilfs_btree_propagate(), which propagates the dirty state to the ancestor nodes of a b-tree that point to a dirty buffer, detects that the origin buffer is not dirty, even though it should be: WARNING: CPU: 0 PID: 5245 at fs/nilfs2/btree.c:2089 nilfs_btree_propagate+0xc79/0xdf0 fs/nilfs2/btree.c:2089 ... Call Trace: <TASK> nilfs_bmap_propagate+0x75/0x120 fs/nilfs2/bmap.c:345 nilfs_collect_file_data+0x4d/0xd0 fs/nilfs2/segment.c:587 nilfs_segctor_apply_buffers+0x184/0x340 fs/nilfs2/segment.c:1006 nilfs_segctor_scan_file+0x28c/0xa50 fs/nilfs2/segment.c:1045 nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1216 [inline] nilfs_segctor_collect fs/nilfs2/segment.c:1540 [inline] nilfs_segctor_do_construct+0x1c28/0x6b90 fs/nilfs2/segment.c:2115 nilfs_segctor_construct+0x181/0x6b0 fs/nilfs2/segment.c:2479 nilfs_segctor_thread_construct fs/nilfs2/segment.c:2587 [inline] nilfs_segctor_thread+0x69e/0xe80 fs/nilfs2/segment.c:2701 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Both of these issues are caused by the callbacks that handle the page/folio write requests, forcibly clear various states, including the working state of the buffers they hold, at unexpected times when they detect read-only fallback. Fix these issues by checking if the buffer is referenced before clearing the page/folio state, and skipping the clear if it is. | |||||
| CVE-2025-21721 | 1 Linux | 1 Linux Kernel | 2026-06-17 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: handle errors that nilfs_prepare_chunk() may return Patch series "nilfs2: fix issues with rename operations". This series fixes BUG_ON check failures reported by syzbot around rename operations, and a minor behavioral issue where the mtime of a child directory changes when it is renamed instead of moved. This patch (of 2): The directory manipulation routines nilfs_set_link() and nilfs_delete_entry() rewrite the directory entry in the folio/page previously read by nilfs_find_entry(), so error handling is omitted on the assumption that nilfs_prepare_chunk(), which prepares the buffer for rewriting, will always succeed for these. And if an error is returned, it triggers the legacy BUG_ON() checks in each routine. This assumption is wrong, as proven by syzbot: the buffer layer called by nilfs_prepare_chunk() may call nilfs_get_block() if necessary, which may fail due to metadata corruption or other reasons. This has been there all along, but improved sanity checks and error handling may have made it more reproducible in fuzzing tests. Fix this issue by adding missing error paths in nilfs_set_link(), nilfs_delete_entry(), and their caller nilfs_rename(). | |||||